| Age | Commit message (Collapse) | Author |
|---|
|
This change enables storing the ISH firmware version on the Trulo
baseboard by selecting the `SOC_INTEL_STORE_ISH_FW_VERSION` config
option.
BUG=b:354607924
TEST=Able to dump ISH version on trulo.
> cbmem -c | grep ISH
[DEBUG] ISH version: 5.4.2.7780
Change-Id: I69a7fa19c53f435ef1f6306b259f703c7b196137
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83820
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
This adds pmc_dump_soc_qdf_info function and PMC_IPC_CMD_SOC_REG_ACC
PMC IPC Command to read and print Intel SoC QDF information using PMC
interface if SOC_QDF_DYNAMIC_READ_PMC is enabled. QDF read command is
supported from Panther Lake SoC.
QDF is a four digit code that can be used to identify enabled features
and capabilities. This information will be useful to debug issues
found during the development phase and in the field as well.
Change-Id: I927da1a97e6dad4ee54c4d2256fea5813a0ce43d
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83784
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The parameter is not available for binutils older than 2.39. So move it
to xcompile to provide backwards compatibility for a bit.
Change-Id: I02982769ae2c356f037a747e85d155368bfcb730
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83693
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Official EDK2 repository has VARIABLE_SUPPORT defaulting to EMU in
UefiPayloadPkg, switch it to SMMSTORE if coreboot is built with
SMMSTOREv2.
This removes custom default of EDK2_CUSTOM_BUILD_PARAMS for
EDK2_REPO_MRCHROMEBOX which is unnecessary now.
Change-Id: Ic59f89c0f708f9b144bd35cd18870d0e1c65677d
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83737
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pass the PSP NVRAM base and size to amdfwtool for all SoCs except Genoa
which doesn't use/support this. This was previously only implemented for
Picasso, but not for the SoCs that support this, so add the support to
those other SoCs as well.
If a mainboard has an section named 'PSP_NVRAM' in its FMAP file, the
start and length of it in the flash will be passed to amdfwtool which
then adds the base and length to the corresponding type 0x04 PSP
directory table entry.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I785ede8eb0df2473a4390b2c305add20f38d7ede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83814
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Move PSP_NVRAM_BASE and PSP_NVRAM_SIZE from the BIOS directory table
items to the PSP Directory Table items, since the corresponding region
will be referenced by the PSP directory table and not the BIOS directory
table.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iff7568ea05c701ecd346cc7590cf93b091ff31a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83813
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
Add support to specify the base and size of the replay-protected
monotonic counter (RPMC) non-volatile storage area in the SPI flash. A
later patch will use this to tell amdfwtool about the location and size
of the corresponding FMAP section.
This code is ported from
github.com/teslamotors/coreboot/tree/tesla-4.12-amd
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idafa7d9bf64125bcabd9b47e77147bcffee739e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83812
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Currently a warning is printed even if the maximum amount of nodes is
not exceeded.
Remove the warning, since in most cases the maximum amount of nodes
for a given prefix is usually well known. For example the /cpu nodes
always have a maximum of CONFIG_MAX_CPUS.
One may also just want to read the first X amount of nodes matching a
given prefix.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Ic1111e8acb72ea1e9159da0d8386f40cbbdbc63f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The Fn key on awasuki emits a scancode of 94 (0x5e).
BUG=b:355538142
TEST=Flash awasuki, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: Ic7aa183bf314fed4901133dc70d848d84fab0784
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83724
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1. Change driver form i2c/hid to i2c/generic.
2. Add fw_config for touchscreen.
BUG=b:351968527
TEST=ectool cbi set 6 0x0x10200a0;
touchscreen functions normally;
Change-Id: Ifd6330be8924d4873f0efab3ce404168a62099eb
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83704
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch configures the GPIO pins to enable ISH on the Trulo device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/trulo.
Change-Id: I3af478762e0a0aa35a2698e0ed87a4d8c24362f0
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83781
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch configures the GPIO pins to enable ISH on the Orisa device,
in accordance with schematic_20240607.
BUG=b:354607924
TEST=Builds successfully for google/orisa.
Change-Id: I24745ba629c59c092ce676b29915e356a4d8d8af
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83656
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
Before 'handle_psp_command' calls any of the functions in this file, it
make sure that the 'size' field in the command buffer's header doesn't
indicate that the command buffer is larger than the SMM memory region
reserved for it.
The read/write command buffer has a 'num_bytes' field to indicate how
many bytes should be read from the SPI flash and put into the data
buffer within the command buffer or how many bytes from this buffer
should be written to the flash. While we should be able to assume that
the PSP won't send us malformed command buffer, we should still better
check this just to be sure.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4e8514eedc3ad154a705c8a1e85d367e452dbed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83778
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use coreboot's SPI flash access infrastructure to do the flash read,
write, or erase operations as requested from the PSP.
This patch is a modified version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I4957a6d316015cc7037acf52facb6cc69188d446
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Detect the block size of the SPI flash and number of flash blocks
reserved for the flash region corresponding to the 'target_nv_id' field
in the command buffer. This information is then written to the
corresponding fields in the command buffer. Since detecting the flash
chip still might result in accesses to it, make sure that it's available
for use and not currently used by an OS driver. Since this code is
inside the SMI handler, we don't have to worry about this code to be
interrupted, so we don't need to set some bit to tell other code that
we're currently using the SPI controller in the SMI handler.
This patch is a modified version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I19041a27a9e8f901d42c3f60af834df625455ea6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83776
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The SPI_SEMAPHORE_DRIVER_LOCKED bit in the SPI_MISC_CNTRL register
doesn't affect the hardware, but it re-used by AMD as a semaphore to
synchronize the access to the SPI controller between SMM and non-SMM
software like an OS-level driver. Since it doesn't affect the hardware,
it's marked as reserved in the PPRs. Add the 'spi_controller_available'
helper function to check this bit to see if some software or driver
outside of SMM is currently using the SPI flash controller to avoid
interfering with that operation.
This patch is a slightly reworked version of parts of CB:65523.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I49218e03a5dd555b2b2d34eaad86673e9fc908c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83775
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add 'find_psp_spi_flash_device_region' to get a pointer to the spi_flash
struct of the SPI flash used in the system and the region_device struct
for the target FMAP region specified by the target NV ID from the PSP
to x86 mailbox command. In order to have small patches, the newly added
static 'find_psp_spi_flash_device_region' function is marked as inline;
that inline will be removed in a following patch that calls this new
function.
This patch is a slightly reworked version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I64b8fba2392de46ecd4c786cef0d5b6acdbd865a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83774
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add and use functions to validate the target non-volatile storage ID in
the different command buffer structs.
This patch is a slightly reworked version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: Idda0166c862d41d380b2ed21345eead5e0a1c135
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83758
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch is a slightly modified version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I41efeecf9243ddbbd8dc3f842c5ce11058bb7999
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83757
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add stub functions for the SPI flash access from the PSP SMI handler
and call them for the corresponding P2C mailbox commands.
Parts of this patch are taken from CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: Iedbc9d41eb0d4e8d81eeba9c01281161eb839991
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83756
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When the PSP wants to access the SPI flash during runtime, but isn't the
owner of the SPI flash controller, it sends an SMI to the x86 side. The
corresponding SMI handler then checks the P2C (PSP to core) mailbox for
the command and data, processes the command, and if needed puts the
requested data into the P2C buffer.
The P2C mailbox is a memory region in TSEG aka SMM memory. Both location
and size are communicated to the PSP via the PSP SMM info mailbox
command which is sent right after mpinit is done.
This commit adds the code to access the P2C mailbox to the PSP SMI
handler code, but the handling of the actual mailbox commands the PSP
sends to the SMI handler is added in later patches to keep the patch
size manageable.
This patch is a heavily reworked version of parts of CB:65523.
Document #55758 Rev. 2.04 was used as a reference.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I50479bed2332addae652026c6818460eeb6403af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83740
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This register is currently used by the SPI DMA code that sets an
undocumented bit. A later patch will add and use some other bit in this
register.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I48447dcfb3cee07619a9b42434731f0b21458021
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83773
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Adjust Touchpad I2C fall time configuration such that it meets the
I2C fast mode specification(<= 400KHz).
BUG=b:328670295
TEST=Build Brox firmware and boot to OS. Confirm the I2C bus
frequency(375 KHz), rise(650 ns) and fall(330 ns) times meet the
specification.
Change-Id: I0006bfb9bb5839ffa1248d9f2ea055160ed0936e
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83755
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
The property `has_cdm` only existed in an early patchset, the version
that was merged only requires `cdm_index` so remove the former that
was added in c6c75dfbaeff208c17bb47fdede855286e12d857.
Change-Id: I62a9456e9a4f1571328ba6fd09ae383a8fd11767
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83796
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: I3161c7d99a2d94d6c85a6c9652b8e78d3f447252
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clean up the devicetree by removing settings set to 0, which are
initialized with 0 anyway, remove superfluous disabled devices and also
remove comments duplicating the device alias names.
Change-Id: I07005ae1db7d92fd50e72351031a5eb491768d3e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83782
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add INTEL PANTHERLAKE SOC section for soc/intel/pantherlake and
add Subrata, Kapil and Pranava as maintainers.
Change-Id: Ife75a0d8111e694ae62db157eb36b09d976762c3
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83780
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add GOOGLE FATCAT MAINBOARDS section for src/mb/google/fatcat and
update the maintainers list to add Subrata Banik and Pranava Y N
as maintainers
Change-Id: I5ae0f0d24d43e91c2097c68446bb64b9ae507e2e
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ibb000fa5e35633504fdd346723efb0c367cbd075
Signed-off-by: Jayvik Desai <jayvik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83726
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Remove some unused GPIOs and configurations for GPIO's that
aren't even connected.
Change-Id: I5b4691a0b5e8b1348304d11c1d59aa60517041ec
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83626
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPIOs for WiFi and Bluetooth are also connected to the EC.
They are controlled from there so remove the configuration here.
Change-Id: I7aef1b821420daf5ea9f6ae107021e5d406a5ec3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The platform uses eSPI so these are not needed.
Change-Id: I81470658263f4b601c9964ff5bed86b22d24df3b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83624
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the USB ACPI to add entries for the USB and TCSS ports.
Change-Id: Iab8b6e03c8c05e459fb354bc008109c873a4846f
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83623
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that multiple TPM drivers may be compiled in, it is possible to
support switching between fTPM and dTPM.
The patch adds:
- Device tree entry for PC80 discrete TPM
- TPM PIRQ# GPIO active low routed to IOAPIC for TPM interrupt
- MEMORY_MAPPED_TPM option to board's Kconfig to enable PC80 TPM driver
When the ME is disabled, e.g. via HECI command, chipset will route the
TPM traffic to SPI automatically. When a SPI TPM is connected to the
JTPM1 on the board, it will be probed successfully and initialized
in place of inactive PTT/fTPM.
Change-Id: Ie6e7026b6f1cec842bce4ef40b6db7feb75200e3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80456
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When both CRB and pc80 TPM drivers are compiled in, building fails
because the tpm_config_t typedef has two incompatible definitions.
Given that typedefs are discouraged by the project's coding style,
simply get rid of the tpm_config_t typedef.
TEST=Compile MSI PRO Z690-A target with CRB and PC80 TPM chips enabled
in devicetree.
Change-Id: Id41717e265362303a17745303a907c9c8f4f4e12
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82057
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clock Power Management, ASPM and L1 Substates have been
configured the same way since Skylake. The main control to
enable or disable is Kconfig, and then the level can be overridden
in devicetree.
Despite the UPDs remaining the same since Skylake, this is not the
case for Alder Lake, Raptor Lake and Meteor Lake.
Taking `starlabs/starbook` as an example, at the time of this
commit it has PCIEXP_CLK_PM, PCIEXP_ASPM and PCIEXP_L1_SUB_STATE
enabled.
On Comet Lake, this results in the correct configuration, verified
with the lspci command:
```
LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L1, Exit Latency L1 <8us
ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
```
On Raptor Lake:
```
LnkCap: Port #0, Speed 16GT/s, Width x4, ASPM L1, Exit Latency L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
```
Clock Power Management, ASPM and L1 Substates are also not configured
for CPU root ports.
Add helper functions to configure these correctly based on Kconfig, but
retain the capability to override the specific levels from devicetree.
Change-Id: I9db18859f9a04ad4b7c0c3f7992b09e0f9484a81
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81638
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_vs`:
* Windows 11
* Ubuntu 22.04
* Manjaro 22
No known issues.
https://starlabs.systems/pages/starlite-specification
Change-Id: I8724e578c21353032b844b20b868348580ff561b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add pad_own_reg_0 to `struct pad_community`. Pad ownership indicates
whether the GPIO is owned by host or Intel Management Engine. If owned
by host, then host ownership indicates whether the GPIO is owned by ACPI
or driver.
Change-Id: I30a934fd00a7a42cb156341da1954e4e4b1231d8
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83315
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CPU and PCIe IDs are from Intel Atom Processor C5100, C5300,
P5300 and P5700 Product Families EDS, doc No. 575160 rev 2.0.
Change-Id: I3f5d612765bbe9adffe0b6c7a4151f32b33e88b4
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83314
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I333b137c1dc08a3c06bdd3f7a78ca44a5dd043cc
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83192
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Depending on how firmware image was passed to QEMU, it may behave as:
- ROM - memory mapped reads, writes are ignored (FW image mounted with
'-bios');
- RAM - memory mapped reads and writes (FW image mounted with e.g.
'-device loader');
- flash - memory mapped reads, write and erase possible through
commands. Contrary to physical flash devices erase is not required
before writing, but it also doesn't hurt. Flash may be split into
read-only and read-write parts, like OVMF_CODE.fd and OVMF_VARS.fd.
Combined size of system firmware must not exceed 8 MiB by default
(FW image(s) mounted with '-drive if=pflash').
This function detects which of the above applies and fills
region_device_ops accordingly.
Tested by starting QEMU with firmware passed as '-drive if=pflash',
'-drive if=pflash,readonly=on' and '-bios'. When started with firmware
passed through '-device loader', coreboot complains about corrupted
FMAP, but this is the same behavior as without this change:
[ERROR] Invalid FMAP at 0x40000
[EMERG] Cannot locate primary CBFS
Writable pflash support was added about 17 years ago, so it should be
supported by all QEMU versions currently in use. Since QEMU 5.0.0 it is
possible to change the limit of firmware size with `max-fw-size` machine
configuration option, up to 16 MiB, as bigger sizes would overlap with
default IO APIC memory range.
Change-Id: I3ab9f22c6165064a769881d4be5eab13a0a2f519
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82555
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
Since most targets support clang it's easier to reverse the semantics of
the Kconfig options.
Change-Id: Ib28e7a4cb286b9f8b05be94dae3947179f43c746
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
This patch move keymap size calculation inside of
has_alpha_num_punct_keys condition. When the condition is not met,
it can prevent total keymaps size calculate incorrectly.
BUG=none
TEST=emerge coreboot pass
Change-Id: I3dcf31d89924c1a8f2768e42065761b361e9ca41
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update GPIOs for WWAN and USB Camera functions.
BUG=b:341188351
TEST=Build and verify on jubilant
Change-Id: I145aa994767ddc59be519b96017af71badf82734
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
|
|
Define ISH main firmware name so ISH shim loader can load firmware
from file system.
BUG=b:354607924
TEST=Boot trulo board, check that ISH is enabled and loaded
lspci shows: 00:12.0 Serial controller: Intel Corporation Device 54fc
Change-Id: Id60cb416a1cce5407bd483f0ce54f477584459b1
Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83671
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Match PCIe root port allocation and associated comments to
boardview, as follows:
Z77 PCIe ports 1-4: PCIEX16_3 (x4)
Z77 PCIe port 5: PCIEX1_1
Z77 PCIe port 6: RTL8111F LAN
Z77 PCIe port 7: ASM1042 USB3
Z77 PCIe port 8: ASM1061 eSATA
CPU PCIe lanes 1-8: PCIEX16_1
CPU PCIe lanes 9-16: Multiplexed via 4x ASM1480 to PCIEX16_1 lanes 9-16
and PCIEX16_2 lanes 1-8
(CPU PCIe lanes are not covered by overridetree.cb.)
These are not hardware tested.
Change-Id: I472e28add254ea945b401d1ddfd03f29f46d8fd2
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The ID for X10SLM+F is 0811 as reported by Knogle on IRC.
Change-Id: Ie58aad50e66efbc3113541884beea9668d886b5d
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The compressing and decompressing functions return 0 on success and not
the other way around.
Change-Id: I9f8653aa805c62eb4bfc3560d7880921830c2c59
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83616
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because Awasuki doesn't have SD card, disable related configurations.
BUG=b:351968527
TEST=abuild -v -a -x -c max -p none -t google/dedede -b awasuki
Change-Id: I1b0d2a9c2f9cdd4bca7c30cdc454ffa84b293146
Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83706
Reviewed-by: zhongtian wu <wuzhongtian@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The PSP can send SMIs to the x86 side to have the SMI handler service
requests from the PSP. This commit adds an empty PSP SMI handler; the
actual implementation is added in later patches to keep the patches
relatively small.
This patch is a slightly modified version of parts of CB:65523.
Test=When selecting SOC_AMD_COMMON_BLOCK_PSP_SMI, Mandolin still builds
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I65989ff529d728cd9d2cd60b384295417bef77ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83739
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BRANCH=None
BUG=b:348171026
TEST=Test on TI PDC device
Cq-Depend: chromium:5691079
Cq-Depend: chromium:5691080
Cq-Depend: chrome-internal:7464767
Original-Change-Id: I6ffb8bdb2245a74b0d5270435d0ffc8a44e7c2a6
Original-Signed-off-by: Bob Moragues <moragues@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/5691110
Original-Reviewed-by: YH Lin <yueherngl@chromium.org>
Change-Id: Iac5b4cd4dcb1d274553f78e9d4295f8f9ad8a863
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
For Sandy/Ivy Bridge boards, this results in northbridge devices ending
up north of (above) southbridge devices. Which is the convention pretty
much all boards in the tree uses.
Change-Id: I9dc2ff13182ff9d92141b1736796749cea49d23a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82406
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Running autoport as root has the annoying side effect of making all
generated files owned by root. Prevent this by using sudo to invoke
log-making programs (lspci, dmidecode, acpidump, inteltool, ectool,
superiotool). These programs either need to be run as root or allow
collecting more information if run as root (lspci).
In case there's a valid reason not to use sudo, provide a prompt to
let autoport run the programs directly, as it originally did. There
might be someone trying to run autoport from an OS that lacks sudo.
Change-Id: I4bf4ddf8dd2cb930e9b7303e2ea986d8c072aa7a
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82404
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The original approach to call external programs was rather convoluted
and would fall back to running executables inside the current working
directory if running them from the location specified in the code did
not succeed, swallowing any errors from the first invocation.
Rewrite the system around the `LogMakingProgram` concept, a struct to
represent a program. Each program has a name, prefixes to try running
it from and the arguments to pass to it (if any). Plus, collect error
information from failed executions, but only show it when none of the
prefixes resulted in a successful invocation.
In addition, look for programs in PATH instead of CWD: it is unlikely
that all utils will be in the CWD, but utils can be in the PATH after
one installs them (`sudo make install`). For coreboot utils, look for
them in the utils folder first as the installed versions might not be
up-to-date.
Furthermore, print out the command about to be executed, as there are
some commands (e.g. `ectool` on boards without an EC) that can take a
very long time to complete.
Change-Id: I144bdf609e0aebd8f6ddebc0eb1216bedebfa313
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82403
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently resource allocation starts top down from the default value
0xfe000000. This does not match what ACPI reports, so adapt
CONFIG_DOMAIN_RESOURCE_32BIT_LIMIT to reflect that.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I2ba0e96a7ab18d65b7fbbb38b1a979ea2ec6d1be
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch introduces the following changes,
- Remove TCSS XHCI (USB 3.x) devicetree settings
- Update Over Current (OC) & USB 2.0 config
- Update TCSS-XHCI capabilities
BUG=b:348332200
TEST=Able to build google/nova and ensure lsusb can list genesys
hub device.
Change-Id: I4b4025bea41f67224ac35ff2077b1394f2c3e380
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83707
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the PMC MUX related setting from devicetree as Nova
doesn't include a MUX for it's USB-C port.
BUG=b:348332200
TEST=Able to build google/nova
Change-Id: I23a949ba9b598d7a86c6f8b08a2821651978e489
Signed-off-by: Pranava Y N <pranavayn@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Fix potential undefined behaviour in the `get_pkg_power()` function:
- If `rapl_power_unit == 0`, `pkg_power_info / rapl_power_unit` is
invalid
- If `rapl_power_unit > 7`, the result of the shift doesn't fit into a
`uint8_t`
Signed-off-by: Mate Kukri <km@mkukri.xyz>
Change-Id: I48ef59c4fbeb0a55675ac24da31e6e0b194cb58d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83736
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
UART0 is already configured in coreboot, so this change sets SerialIo
config for UART0 to PchSerialIoSkipInit to skip initialization in FSP.
BUG=none
TEST=Able to build and boot google/rex0. Able to see all debug prints
over CPU uart.
Change-Id: I37744f05083eb82ba8ca579b628b69aa976e3d1f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83750
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Currently we use "%p" to print the address, which results in different
string lengths, depending on the value of the address. To improve
readability of the printed addresses in the log, change the format to
"0x%013lx", so that the length of the printed addresses will be
consistent.
In addition, print the level of the translation table when setting up a
new table.
Example log:
Backing address range [0x0000000000000:0x1000000000000) with new L0 ...
Mapping address range [0x0000000000000:0x0000200000000) as ...
Backing address range [0x0000000000000:0x0008000000000) with new L1 ...
Mapping address range [0x0000000100000:0x0000000130000) as ...
Backing address range [0x0000000000000:0x0000040000000) with new L2
Backing address range [0x0000000000000:0x0000000200000) with new L3
Mapping address range [0x0000000107000:0x0000000108000) as ...
Mapping address range [0x0000000200000:0x0000000300000) as ...
Backing address range [0x0000000000000:0x0000000200000) with new L3 ...
BUG=none
TEST=emerge-geralt coreboot
BRANCH=none
Change-Id: Ib29c201e1b096b9c7cd750d2541923616bc858ac
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83652
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
These formats are already included in memlayout.ld.
Change-Id: I89d226440308ce3fbe00382698dcd8c88863e694
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Clang does not work that well as a linker for the header as it will
default to other linkers which do not work well here. Instead just use
the linker directly.
Change-Id: Id6ba42b470349a4b138a65b2a037f16a65982ef7
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70161
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The patch enforces CSE sync when the GBB flag GBB_FLAG_FORCE_CSE_SYNC is
enabled and the system is currently booting from the RO section.
Additionally, it integrates forced CSE sync into eSOL decision-making.
BUG=b:353053317
TEST=Verified forced CSE sync on rex0 with GBB 0x200000
Cq-Depend: chromium:5718196
Change-Id: I228bc8ebf58719776f6c39e0bfbb7ad53d9bfb7f
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83686
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch adds a GBB flag to coreboot, which, when enabled, enforces
CSE sync even if the current CSE version matches the version in CBFS.
The CSME sync GBB and flag are designed to enhance autotest
functionalities and are not intended or recommended for use in
developing any other features.
BUG=b:353053317
TEST=futility gbb --help
Cq-Depend: chromium:5718196
Change-Id: I6352959e1e898a90b4c6e12a22f8d6513f90ded9
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83685
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id 4b12d392e5b1:
scripts: Add a script to convert a vbprivk to a PEM
to commit id f1f70f46dc54:
2lib: Add gbb flag to enforce CSE sync
-Subproject commit 4b12d392e5b12de29c582df4e717b1228e9f1594
+Subproject commit f1f70f46dc5482bb7c654e53ed58d4001e386df2
Change-Id: I2c5b603ce5ea49e6c1aec293960184d84eedd1e7
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The ROTM method should return a package:
```
Name (RBUF, Package (0x03)
{
"0 1 0",
"1 0 0",
"0 0 1"
})
Return (RBUF)
```
Adjust the acpigen to do this.
Change-Id: Id493f6955c1d0dc3449402262a8575091a828226
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Clang builds (bootblock: 20800 bytes) are slightly larger than GCC
builds (bootblock: 18688 bytes) so increase the size of both bootblock
and romstage.
The technical reference manual mentions no upper limit to the size of
the bootblock in the TI header so increasing the bootblock size is
allowed.
To be able to link the clang bootblock increase it from 20K to 22K.
Change-Id: I8719bc3728d4cc8dba8d939cc154c3fc0884d47b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70160
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I2fd6e8fcebd194da03ba3f264ee89037ca11769a
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83746
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
The previous uploaded verb table is not fully applied due to
configuration error. Uploaded the verb table provided by Realtek which
can be found in b:336967284.
BUG=b:326412504, b:336967284
TEST=deploy and check volume
Change-Id: Ib9a8248c4a437fd204f40918d801a4a010a5c4df
Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83465
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Terry Cheong <htcheong@chromium.org>
|
|
DC offset of class-D amplifier is 7mV in Brox which is larger than the expected 3mV.
Add a section in the verb table to enable class-D calibration based
on the updated verb table provided by Realtek in b:342506575 comment#6.
This improves the offset to be less than 1mV.
BUG=b:342506575
BRANCH=main
TEST=Verify DC offset of speaker amplier output is less than 1mV with a multimeter when \
playing -100dB sine waves.
Change-Id: I776f5c24ce3c829cbd64840957c1431608cf2b85
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82794
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Create the jubilant variant of the brox reference board by copying
the template files to a new directory named for the variant.
BUG=b:348543712
TEST=util/abuild/abuild -p none -t google/brox -x -a
make sure the build includes GOOGLE_JUBILANT.
Change-Id: Ic54437697058f8bce2167093bd88c0880d1b7cac
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83212
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
The PSP can send SMIs to the x86 side of the system. Add helper
functions to configure and to reset the PSP SMI generation. Since
Stoneyridge also selects SOC_AMD_COMMON_BLOCK_SMI, add the SMITRIG0_PSP
define and rename SMITYPE_FCH_FAKE0 to SMITYPE_PSP in its SoC-specific
smi.h to bring it in line with the newer SoCs.
This patch is split out from CB:65523.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Ritul Guru <ritul.bits@gmail.com>
Change-Id: I525a447c9a75fdb95b9750e85a02896056315edf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83702
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to detect more issues in our code, make GCC more picky by
enabling -Wextra. Disable a couple of warnings turned on by -Wextra
temporarily in order to keep everything compiling and working for now.
The warnings may be enabled step by step later.
Since xcompiles applies to coreboot and libpayload, add Wextra here
instead of the top-level Makefile.mk.
Change-Id: I60915cb66581dc2c9b6807335fd0e214b45e76d6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83347
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3c4a963b233f549c7a76c76333af87c887550ac3
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The Windows drivers require the subsystem ID to match on the PCI
device, so set these to allow the driver to install.
Change-Id: I01b36554d5322018efc72734a8e749cc06263577
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83621
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SMRAMC, C_BASE_SEG, G_SMRAME, D_LCK, D_CLS, D_OPEN, ESMRAMC, T_EN,
TSEG_SZ_MASK and H_SMRAME are already defined in included "q35.h" file.
Change-Id: Ic3c01cca14749f77adecc327a78ac011ba3f4c0b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83429
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
"0x1502 F81804 chipset ID, same for F81966" in
https://web.archive.org/web/20240628153609/https://github.com/torvalds/
linux/blob/master/drivers/gpio/gpio-f7188x.c
Change-Id: I6889ad8ad861465316333ff997956a05b74c5855
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83018
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
acpigen_write_pci_root_port writes SSDT device objects for PCIe
root port, _ADR and _BBN are provided. SSDT objects for direct
subordinate devices will also be created (if detected), _ADR and
_SUN are provided.
TEST=Build and boot on intel/archercity CRB
Change-Id: I434fea7880a463c2027abfa22ba2b3bb985815c0
Signed-off-by: Lu, Pen-ChunX <pen-chunx.lu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Create the teliks variant of the nissa reference board by copying
the anraggar files to a new directory named for the variant.
BUG=b:352263941
BRANCH=None
TEST=1. util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_TELIKS
2. Run part_id_gen tool without any errors
Change-Id: I744f4d7c2d35544d3a8a8f76e24bad3298442768
Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83408
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch supports keyboards that have delete key but without
numpad.
To prevent KEY_DELETE be defined twice, move it from
numeric_keypad_keymaps to rest_of_keymaps.
BUG=b:345231373
TEST=Build and test on Riven/Craaskino, delete key function
works
Change-Id: Ib922a2b52fa7152ba3d9deb44e2c8200b2a3802c
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83684
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The Type-C kernel driver no longer programs the AP mux. So remove device
references to the TCSS Mux control device from the Type-C port driver.
BUG=b:351117685
TEST=USB-C drive can be detected after system warm or cold reboot.
Change-Id: I4a24fb69ebec87f65b679cde0e4a1a8827cd365d
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83722
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Since the P2C_BUFFER_MAXSIZE value will be needed in another compilation
unit, move the define to the common psp_def.h. P2C_BUFFER_MAXSIZE is
moved there too for consistency reasons.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d4d93760c90ad6e0ecadf70600b1d697a02fa82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83701
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When sending mailbox commands to the PSP from SMM, the SMM flag needs to
be set right before sending the mailbox command and cleared right after
the command is sent. In order to not have this code duplicated, factor
it out into a function.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3628463dece9d11703d5a068fe7c604108b69c1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83700
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
The reasoning behind this and the positive side effects of this aren't
too clear from the code, so point those out in a comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4f4121031fc1ef600cdf5551f61f1ef4e03b56a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Since it's not exactly obvious what 'c2p_buffer', 'p2c_buffer' and
'smm_flag' are used for, add comments to those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4ec092a92fe9f0686ffb7103e441802fc05381f4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Rename the 'domain' element of the 'domain_path' struct to 'domain_id'
to clarify that this element is the domain ID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3995deb83a669699434f0073aed0e12b688bf6e7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83677
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
To avoid having constructs like 'dev->path.domain.domain' in the SoC
code, create the 'dev_get_domain_id' helper function that returns the
domain ID of either that device if it's a domain device or the
corresponding domain device's domain ID, and use it in the code.
If this function is called with a device other than PCI or domain type,
it won't have a domain number. In order to not need to call 'die',
'dev_get_domain_id' will print an error and return 0 which is a valid
domain number. In that case, the calling code should be fixed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3d79f19846cea49609f848a4c42747ac1052c288
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83644
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In accordance with the F81962/F81964/F81966/F81967 datasheet:
Release Date: Feb, 2018, Version: V0.18P [1].
[1] https://web.archive.org/web/20240707052102/http://
www.jetwaycomputer.com/download/Fintek/F81966_wdt_gpio.zip
Change-Id: Ic3418c337883538e47eb181cbe1ad2dc828e12a1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In accordance with the F81866A datasheet:
Release Date: Jan, 2012, Version: V0.14P [1].
[1] https://web.archive.org/web/20240707051837/http://www.
jetwaycomputer.com/download/Fintek/F81866_wdt_gpio.zip
Change-Id: I4367a1129fe628e7bf05d49678ea1c3718da710b
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83004
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some chips (fintek [1,2]) have registers with specific selector-fields
that can affect the address space of the device (for example, switch the
register bank). At the same time, these registers contain fields that
should not change after they are configured in BIOS (for example, set
the port to 2E/2F or 4E/4F). In this case, the selector should take into
account the mask of the register fields and there is no convenient and
easy way to add this in the code in the utility. The selector-fields
should be set manually before the dump and this action is done several
times.
This patch adds an extra-selector mechanism that allows superiotool to
make a correct dump in automatic mode.
Just add a structure with an index, mask, and value for the selector
inside the superio_registers chip for the corresponding LDN to switch
the register bank:
{FINTEK_F81966_DID, "F81962/F81964/F81966/F81967", {
* * *
{NOLDN, "Global",
{0x28,0x2a,0x2b,0x2c,EOT},
{0x00,0x00,0x00,0x00,EOT},
{.idx = 0x27, .mask = 0xd, .val = 0x1} /* update extra selector */
},
{0x03, "LPT",
{0x30,0x60,0x61,0x70,0x74,0xf0,EOT},
{NANA,0x03,0x78,0x07,0x03,0xc2,EOT} /* without extra selector */
},
* * *
Tested with Fintek F81966 on Asrock IMB-1222:
- run superiotool on Ubuntu and dump the registers for the board with
the vendor's firmware;
- add the superio chip initialization code to the board configuration
in coreboot and build the project;
- boot Ubuntu on the board with coreboot and re-dump the registers;
- the register values from the board configuration code are the same
in both dumps.
Found Fintek F81962/F81964/F81966/F81967 (vid=0x3419, id=0x0215) at 0x2e
(Global) -- ESEL[27h] 0x00 (Port Select Register) --
idx 02 07 20 21 23 24 25 26 27 28 29 2a 2b 2c 2d
val 00 0b 15 02 19 34 5a 23 80 a0 f0 45 02 e3 2e
def NA 00 15 02 19 34 00 23 02 a0 00 00 02 0c 28
* * *
The changes do not affect the configuration of existing chips, which
was tested on the Asrock H110-STX motherboard with Nuvoton NCT5539D
(the dump before and after the changes are the same).
[1] CB:83004
[2] CB:83019
Change-Id: If56af9f977381e637245bdd26563f5ba7e6cbead
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83196
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
During the stages which use Cache-as-RAM (CAR), coreboot needs more than
1 KiB as configured in DCACHE_BSP_STACK_SIZE. After studying the UPDs
for various SoCs(ADL-P, ADL-N, RPL), coreboot stack requirement is
estimated to be 32 KiB. Update DCACHE_BSP_STACK_SIZE accordingly.
BUG=None
TEST=Build Brox BIOS image and boot to OS.
Change-Id: I723ba1f4289c393fe7376f989d760b26e75b33da
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83680
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch drops fw_config probing for ISH because ISH IP should
remains on by default for all Trulo variants.
Additionally, removed the redundant ISH entries from variant
override devicetree.
BUG=b:354607924
TEST=Able to verify ISH PCI Device is available while booting eMMC sku.
```
lspci
00:00.0 Host bridge: Intel Corporation Device 461c
...
00:12.0 Serial controller: Intel Corporation Device 54fc
...
00:1a.0 SD Host controller: Intel Corporation Device 54c4
```
Also, able to enter S0ix with this patch.
```
> suspend_stress_test -c 1 --ignore_s0ix_substates
At AP console:
s0ix errors: 0
s0ix substate errors: 0
s0ix pc10 errors: 0
At EC console:
power state 5 = S0ix, in 0x38d87
```
Change-Id: Ic1e415ec848ac91a9bbf21b26597f4e6b5f7a1f5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83695
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce PchPmSlpAMinAssert (pch_slp_a_min_assertion_width) to minimum
time (98ms) from 2sec.
BUG=b:349595391
BRANCH=firmware-brya-14505.B
Test=Verified on xol
Change-Id: Ia4b7b7ab5dc9afeb3505dfd2b42d0d397aed7a5c
Signed-off-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83683
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Streamline variant-level overrides by removing redundant entries that
already exist in either the SoC-level or the platform-level configurations.
BUG=None
TEST=emerge-nissa coreboot
Change-Id: I0b28354dfb865900a78a9d0738e00aa952eade0e
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Idcdd3e2525b621310aaf43608fd5fede8133d16a
Signed-off-by: Rishika Raj <rishikaraj@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83675
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Chip Direct Mapping is exclusive to Windows; it allows specifying the
position where a chip is mounted. There are 8 positions and a _CDM
method should return 0xabcd0X, where X is the position.
Tested by booting Windows 11 on the StarLite Mk V, rotating the device
and checking the orientation is correct, where previously, it was
inverted.
Change-Id: If70c25288d835df7064b4051c43abeb2d6531f3b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81409
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The comment for the BOOTBLOCK region should be written right above the
BOOTBLOCK declaration.
BUG=b:317009620
TEST=none
BRANCH=none
Change-Id: I7afdf74844a9d97169b4e4a23c3c9c6060e886d9
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83649
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 59ee65d271c7c617bcc240019231da4f0bd04db6.
Reason for revert:
- Usb4CmMode & CnviWifiCore Upds are available starting with TWL FSP
version v5222.01. Therefore, no special handling is required.
BUG=b:330654700
TEST=Able to build google/tivviks.
Change-Id: I3c74ec5b9924e88a26984fe8d3275ba80edb14ab
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83658
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
|
|
This change adds a new USB2 Bluetooth device configuration on Port 10
for the Trulo variant.
* A new `drivers/usb/acpi` chip is added with:
* `desc` set to "USB2 Bluetooth"
* `type` set to "UPC_TYPE_INTERNAL"
* `reset_gpio` set to "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A13)"
* `device` referencing `usb2_port10`
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9a92a4d008eb4d0c339079ecbbb77facece435ba
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This change removes the configuration for the unused USB2 Port 6
(index 5) and its associated Bluetooth device on the Trulo variant.
BUG=b:351976770
TEST=Builds successfully for google/trulo.
Change-Id: I9970274b9b1b1076a2f9d649d61c825cac71d0c7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83665
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rishika Raj <rishikaraj@google.com>
|
