summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-16amdfwtool: Check combo_index before checking the combo_configZheng Bao
Otherwise Checking combo_config[++combo_index] causes Out-of-Bounds access. Change-Id: I50d466ee98edfb18c01fc7ba43e929640b33c7c1 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73647 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-03-16amdfwtool: Add asserting before accessing array combo_configZheng Bao
Change-Id: Ia98fdbee4c4005562662313ebe2478d0aeb879bc Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73724 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-03-16mb/google/brask/var/aurash: Allow USB2/3 wakeups to (un)plug events in dtZoey Wu
BUG=b:271373437 BRANCH=none TEST=Verify USB-A device could wake up Aurash. Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com> Change-Id: I67fc02d6c5660e0e3d1ab95bbda8ace1dc14b524 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73414 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15mb/google/rex: Add Hayden Bridge (HB) to USB_DB FW_CONFIGSubrata Banik
This patch increases FW_CONFIG for USB_DB to 3-bits. BUG=b:273346973 TEST=Able to build and boot google/rex with Proto 2 SKU Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib07ba1d54e7f7e2b09a99438529e503d9c9edb7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-15mb/google/dedede: Add EC_HOST_EVENT_PANIC to SCI maskRob Barnes
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the Kernel when an EC panic occurs. If system safe mode is also enabled on the EC, the kernel will have a short period to extract and save info about the EC panic. BUG=b:268377440 BRANCH=firmware-dedede-13606.B TEST=Observe kernel ec panic handler run when ec panics Change-Id: I24f929ae60a406d0091956dc6cab3e2876ca23e9 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15mb/google/rex: Configure _DSC for camera devicesJamie Ryu
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:268607999 TEST=Build and boot rex proto1 to OS and verify privacy LED behavior. Change-Id: Ife849f7407b02867ddb992d7eebb08b0b44aecc8 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15soc/intel/xeon_sp: Rename nb_acpi.c to uncore_acpi.cJohnny Lin
With newer xeon_sp processors, the concept of "north bridge" became obsolete, instead uncore should be used. Therefore we use uncore_acpi.c (instead of nb_acpi.c) going forward. Change-Id: I91ec9023152996bf9f2300a369aff3c4f19d75fd Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
2023-03-15soc/amd/mendocino: MP2 firmware isn't needed in the RO imageMartin Roth
The MP2 firmware doesn't do anything useful when booting into recovery mode, so don't include it in the RO image if vboot is enabled. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5afbf7e9e730e6951c416f3a3ca75f69a22099cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/73660 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15soc/amd: Print amdfwtool debug info if V=1Martin Roth
When doing coreboot builds, we can set V=1 to see all of the make info printed as the compile is happening. Use this flag to set the debug flag for amdfwtool so it doesn't have to be enabled separately. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5b05cbc9f9b540a174db479822af657cf35733de Reviewed-on: https://review.coreboot.org/c/coreboot/+/73658 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-03-15soc/amd/common: Ignore * in PSP dependency generationMartin Roth
The regex getting rid of lines containing a '*' didn't match anything in any configs, so get rid of it. There's nothing in the amdfwtool dataparse.c file that would match it either. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I05aaf46cfb479cebab9234a47574073335984a5f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-15soc/amd/common: Update PSP dependency generationMartin Roth
After adding the ability to add paths into the amdfw.cfg file for the amdfwtool, the dependency generation needs to be updated to not add the firmware location in front of those values. This also allows us to filter out the MP2 binaries as dependencies based on whether or not the Kconfig value is set. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I3a9b9c8246808dc60020a32a7d9d926bc5e57ccd Reviewed-on: https://review.coreboot.org/c/coreboot/+/73657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-15util/amdfwtool: Update config parser to accept full pathsMartin Roth
This allows individual components to be placed in a location other than what is specified by the FIRMWARE_LOCATION line. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I3a83e52d081a5909d54eacc575dd2b40b09e4038 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-03-15mb/google/skyrim: Do not pass recovery APCBKarthikeyan Ramasubramanian
If recovery APCB is not passed, amdfwtool will build amdfw*.rom with AMD_BIOS_APCB_BK entry pointing to the same offset as AMD_BIOS_APCB entry. This will help to save 40 KiB flash space in each FW slot. On ChromeOS, this means saving ~120 KiB flash space. BUG=b:240696002 TEST=Build and boot to OS in Skyrim. Change-Id: Ib3bbc1eededae20b2cd48f514722a207c46536a0 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73662 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15util/amdfwtool: Support not passing recovery/backup APCBKarthikeyan Ramasubramanian
If Recovery/Backup APCB is not passed, then AMD_BIOS_APCB_BK entry is not populated. But PSP expects that bios directory entry to be populated. Also on mainboards where both APCB and recovery APCB are same (eg. Skyrim), 2 copies of the same APCB are added to amdfw*.rom. Update amdfwtool to support not passing recovery/backup APCB. If the recovery APCB is not passed, then populate AMD_BIOS_APCB_BK entry and make it point to the same offset as AMD_BIOS_APCB entry. BUG=b:240696002 TEST=Build and boot to OS in Skyrim. Ensure that the device can enter recovery mode. Perform multiple suspend/resume cycles. Change-Id: I031ba817573cd35160f5e219b1b373ddce69aa6b Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73661 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15amdfwtool: Remove the initial alignment on newer SoCsKarthikeyan Ramasubramanian
On newer SoCs the initial alignment is not required. So skip initial alignment. This saves 64 KiB flash space on each firmware slots. This also saves ~5 ms while loading amdfw.rom BUG=b:240696002 TEST=Build and boot to OS in Skyrim. Change-Id: I27cbfde2d7d58b62a4c0039c60babc3fb3bd95fa Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73654 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-15soc/intel/tigerlake: Select `X86_CLFLUSH_CAR` configLean Sheng Tan
This patch selects `X86_CLFLUSH_CAR` config for running `clflush` to invalidate the cache region based on commit 3134a81 for boot performance improvement. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I97c8c07db9b44aa89b433e7962ec77c8501ecaa9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-15soc/intel/elkhartlake: Select `X86_CLFLUSH_CAR` configLean Sheng Tan
This patch selects `X86_CLFLUSH_CAR` config for running `clflush` to invalidate the cache region based on commit 3134a81 for boot performance improvement. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I8f8a0bfeaea508d3b4ad1b3fe2e68742cbab5570 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73687 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15soc/intel/coffeelake: Select `X86_CLFLUSH_CAR` configLean Sheng Tan
This patch selects `X86_CLFLUSH_CAR` config for running `clflush` to invalidate the cache region based on commit 3134a81 for boot performance improvement. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: Icd3d16ab2cb34dc81fc12ec139c52ecaa170528d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73686 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15soc/intel/alderlake: Select `X86_CLFLUSH_CAR` configLean Sheng Tan
This patch selects `X86_CLFLUSH_CAR` config for running `clflush` to invalidate the cache region based on commit 3134a81 for boot performance improvement. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I1fe6072a3c23a02c9a691406f179bfc8f0f18a93 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73685 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-15soc/mediatek/mt8186: Shut down PMIC on power key long pressSen Chu
Currently on power key long press, PMIC will be reset. It would cause an unwanted reset pulse in the power-off sequence. To match expected sequence, change PMIC behavior to "force shutdown". BUG=b:271771606 TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse BRANCH=corsola Change-Id: I9ab35d82e57f43bac99fa8bd7bb69fcf52250311 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73705 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15soc/mediatek/mt8188: Shut down PMIC on power key long pressSen Chu
Currently on power key long press, PMIC will be reset. It would cause an unwanted reset pulse in the power-off sequence. To match expected sequence, change PMIC behavior to "force shutdown". BUG=b:271771606 TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse Change-Id: I1626892fd582dfab8fe1c1ede1da00549bc97142 Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73704 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15mb/google/brya/var/omnigul: Correct mux_conn for USB C1Dtrain Hsu
Modify USB C1 mux_conn to 1. It should match ec settings. BUG=b:272394875, b:272667290 BRANCH=firmware-brya-14505.B TEST=Plug USB-C hub in USB C1 and could recognize USB drive and hdmi. Change-Id: I61b77405d1790b044174cef954e5bf910141f424 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-15mb/google/brya/var/omnigul:Fixed can't detect 3.5mm headphone jackJamie Chen
1. Modify irq_gpio GPP_H0 -> GPP_A23 BUG=b:272218750 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I8e178b149015ed8027b547e4c2109b3aef8a7484 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15mb/google/brya/var/omnigul:Fixed Touch screen has no actionJamie Chen
1. Add generic.stop_gpio = GPP_C6 2. Add c.stop_off_delay_ms = 2 BUG=b:271966059 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I33857443d8a68e7b50ac5f8f08afc017fe4f5a59 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-14mb/google/skyrim/var/frostflow: Update the STT settingsFrank Wu
According to file thermal_table_0310, adjust the STT settings. BRANCH=none BUG=b:257149501 TEST=emerge-skyrim coreboot chromeos-bootimage Then the thermal team has verified. Change-Id: If4500c85dcea051aca15602f1fb4b5ec80b73e67 Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73698 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Chao Gui <chaogui@google.com>
2023-03-14mb/google/dedede/var/dibbi: Configure I2C times for audioAmanda Huang
Configure the I2C bus high and low time for audio. BUG=b:271804915 BRANCH=dedede TEST=Build and confirm I2C clock for audio is between 380 kHz and 400 kHz Change-Id: I2987a39abc5527844424edfa1cf70d5c5cea5357 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-03-14mb/google/brya: Create uldren variantvan_chen
Create the uldren variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:271513530 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_ULDREN Change-Id: Ibbcd34fb4ef1f7464f0c94d2fcf75280c3eed6be Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73680 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-13soc/intel/meteorlake: Enable early caching of TOM regionSubrata Banik
Intel Meteor Lake decides to enable early caching of the TOM region to optimize the boot time by selecting `SOC_INTEL_COMMON_BASECODE_TOM` config. TEST=Able to build and boot google/rex to ChromeOS and reduce the boot time by 77 ms. Without this patch: 950:calling FspMemoryInit 936,811 (19,941) 951:returning from FspMemoryInit 1,041,935 (105,123) With this patch: 950:calling FspMemoryInit 905,108 (20,103) 951:returning from FspMemoryInit 964,038 (59,929) Change-Id: Iebb3485b052386b43d5bccd67a04e6115cbcc20d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73274 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-13drivers/intel/fsp2_0: Have provision for caching TOM regionSubrata Banik
This patch enables early caching of TOM region to optimize the boot time if valid mrc cache is found (i.e. except the first boot after flashing/updating few AP firmware image). TEST=Able to build and boot google/rex to ChromeOS. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia575ad0f99d5b0fd015e40b0862e8560700f6c83 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73334 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-13soc/intel/cmn/sa: Store TOM into the CMOSSubrata Banik
This patch uses the IA common code API to store the top_of_ram (TOM) address intonon-volatile space (CMOS). The code logic will update the TOM address in CMOS NVS if the `top_of_ram` address is calculated differently in any boot and also takes care of caching the updated range. TEST=Able to build and boot google/rex to ChromeOS. First boot: Before calling into FSP-M [DEBUG]  0x00000000fef00006: PHYBASE0: Address = 0x00000000fef00000, WB [DEBUG]  0x00003ffffff80800: PHYMASK0: Length  = 0x0000000000080000, Valid [DEBUG]  0x00000000fef80006: PHYBASE1: Address = 0x00000000fef80000, WB [DEBUG]  0x00003ffffffc0800: PHYMASK1: Length  = 0x0000000000040000, Valid [DEBUG]  0x00000000ff000005: PHYBASE2: Address = 0x00000000ff000000, WP [DEBUG]  0x00003fffff000800: PHYMASK2: Length  = 0x0000000001000000, Valid [DEBUG]  0x00000000f9800005: PHYBASE3: Address = 0x00000000f9800000, WP [DEBUG]  0x00003fffff800800: PHYMASK3: Length  = 0x0000000000800000, Valid ... [DEBUG] tom_table invalid signature [DEBUG]  top_of_ram = 0x76000000 [DEBUG] Updated the TOM address into CMOS 0x76000000 On consecutive boot:Before calling into FSP-M: The TOM region is already cached. [DEBUG]  0x00000000fef00006: PHYBASE0: Address = 0x00000000fef00000, WB [DEBUG]  0x00003ffffff80800: PHYMASK0: Length  = 0x0000000000080000, Valid [DEBUG]  0x00000000fef80006: PHYBASE1: Address = 0x00000000fef80000, WB [DEBUG]  0x00003ffffffc0800: PHYMASK1: Length  = 0x0000000000040000, Valid [DEBUG]  0x00000000ff000005: PHYBASE2: Address = 0x00000000ff000000, WP [DEBUG]  0x00003fffff000800: PHYMASK2: Length  = 0x0000000001000000, Valid [DEBUG]  0x00000000f9800005: PHYBASE3: Address = 0x00000000f9800000, WP [DEBUG]  0x00003fffff800800: PHYMASK3: Length  = 0x0000000000800000, Valid [DEBUG]  0x0000000075000005: PHYBASE4: Address = 0x0000000075000000, WP [DEBUG]  0x00003fffff000800: PHYMASK4: Length  = 0x0000000001000000, Valid Change-Id: I2569495570652c488096f6a29f58dd8f0103af9d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73273 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-13soc/intel/cmn/tom: Cache TOM region earlySubrata Banik
This patch implements a module that can store the top_of_ram (TOM) address into non-volatile space (CMOS) during the first boot and use it across all consecutive boot. As top_of_ram address is not known until FSP-M has exited, it results into lacking of MTRR programming to cache the 16 MB TOM, hence accessing that range during FSP-M and/or late romstage causing long access times. Purpose of this driver code is to cache the TOM (with a fixed size of 16MB) for all consecutive boots even before calling into the FSP. Otherwise, this range remains un-cached until postcar boot stage updates the MTRR programming. FSP-M and late romstage uses this uncached TOM range for various purposes (like relocating services between SPI mapped cached memory to DRAM based uncache memory) hence having the ability to cache this range beforehand would help to optimize the boot time (more than 50ms as applicable). TEST=Able to build and boot google/rex to ChromeOS. Without this patch: 950:calling FspMemoryInit               936,811 (19,941)   951:returning from FspMemoryInit        1,041,935 (105,123) With this patch:  950:calling FspMemoryInit               905,108 (20,103)   951:returning from FspMemoryInit        987,038 (81,929) Change-Id: I29d3e1df91c6057280bdf7fb6a4a356db31a408f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73272 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-13top/Makefile.inc: Define regions-for-file with a flexibilityZheng Bao
If we need to put a CBFS chunk into a specific region, add a line in any Makefile.inc regions-for-file-xxx=region_name TODO:Do a complete binary identical test for all the mainboards. Change-Id: Ie37a8a9230dc8b8e5664be8806f047afb94fba69 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-13soc/amd/phoenix/mca.c: Remove excess MCA bank namesFred Reitberger
Documentation and hardware differ in the number of MCA bank names, so remove the excess ones to prevent a "CPU has an unexpected number of MCA banks!" warning message. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I75a2348561833f3f19181b4f30a6971ecb317899 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-03-13soc/amd/common/block/cpu/update_microcode: use raw MSR dataFelix Held
Since mst_t is a union of the struct containing the lower and higher 32 bits and the raw 64 bit value, the address of the microcode update can be directly written to the raw value instead of needing to split it into the lower and higher 32 bits and assigning those separately. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I51c84164e81477040a4b7810552d3d65c0e3656b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-13soc/amd/common/block/cpu/noncar/write_resume_eip: use raw MSR dataFelix Held
Since mst_t is a union of the struct containing the lower and higher 32 bits and the raw 64 bit value, the address of the bootblock_resume_entry can be directly written to the raw value instead of needing to split it into the lower and higher 32 bits and assigning those separately. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I7ebab1784ec592e18c29001b1cf3ee7790615bf8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-13arch/x86/include/arch/mmio.h: Provide __always_inline definition for muslFabian Groffen
fix compilation on musl-libc systems by providing an implementation for __always_inline Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I01a7eb9ed28e79523623ab362510ec2d93f4a8b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73667 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-13soc/intel/meteorlake: Select `X86_CLFLUSH_CAR` configSubrata Banik
This patch selects `X86_CLFLUSH_CAR` config for running `clflush` to invalidate the cache region. TEST=Able to build and boot google/rex. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I6b2dce39f82e28cd99ad8621c78bae494c4f16ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/73333 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-13cpu/x86/cache: CLFLUSH programs to memory before runningArthur Heymans
When cbmem is initialized in romstage and postcar placed in the stage cache + cbmem where it is run, the assumption is made that these are all in UC memory such that calling INVD in postcar is OK. For performance reasons (e.g. postcar decompression) it is desirable to cache cbmem and the stage cache during romstage. Another reason is that AGESA sets up MTRR during romstage to cache all dram, which is currently worked around by using additional MTRR's to make that UC. TESTED on asus/p5ql-em, up/squared on both regular and S3 resume bootpath. Sometimes there are minimal performance improvements when cbmem is cached (few ms). Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37196 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-13MAINTAINERS: Add Kevin Keijzer for ASRock B75M-ITXKevin Keijzer
Change-Id: I6f2047e62c1e999823bf98acaf3530aa62478449 Signed-off-by: Kevin Keijzer <kevin@quietlife.nl> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Fabian Groffen <grobian@gentoo.org>
2023-03-13mb/google/skyrim/var/winterhold: Change touch controller T3EricKY Cheng
Change stop_delay_ms time(T3) from 180 to 150 to meet specification. T3 min-value of HID-I2C should be 150ms. BUG=b:267280863 TEST=emerge-skyrim coreboot chromeos-bootimage. Change-Id: I7ef7db4edaecece1fa5ab07e30a80e556ed35f8b Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-13mb/google/brask/var/kinox: Allow USB2/3 hotplug to wakeup S0ixDtrain Hsu
Allow USB2/3 hotplug event to wake up S0ix. BUG=b:236189998 BRANCH=firmware-brya-14505.B TEST=Verify USB-A device could wake up Kinox Change-Id: I8aeeeac6c21289b70bdc7ffddc57687ac39e8456 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-12util/inteltool: Fix build on musl-libc systemsFabian Groffen
use __linux__ instead of __GLIBC__ guard for Linux-specific includes Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ifbf4552591c0df7811c5b37a9207c0901b6fd68f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73666 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-12util/superiotool: Fix build on musl-libc systemsFabian Groffen
- use __linux__ instead of __GLIBC__ guard for Linux-specific includes - use POSIX ioperm instead of deprecated iopl Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I99613007aa9feddcb1041f31085cdeb195ff7a68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-10top/Makefile.inc: add _tohexZheng Bao
Get string of hex value of a given number. Change-Id: I6d3525db19089938897b9d19ad9875bb07e0eecf Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72953 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-10soc/amd/common/psp: Put spl_fuse in separate compilation unitMartin Roth
This separates the SPL fusing function into a separate C file which can be excluded if it is not needed. This allows the psp_set_spl_fuse() function to be made static again as the state of the function will always match the boot_state entry. Move the required #defines to the common header file so they can be used by both psp_gen2.c & spl_fuse.c. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ifbc774a370dd35a5c1e82f271816e8a036745ad5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73655 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-10soc/amd/common/cpu/smm/smm_relocate: don't assume TSEG is below 4GBFelix Held
Even though right now TSEG will always be located below 4GB, better not make assumptions in the SMM relocation code. Instead of clearing the higher 32 bits and just assigning the TSEG base and per-core SMM base to the lower 32 bits of the MSR, assign those two base addresses to the raw 64 bit MSR value to not truncate the base addresses. Since TSEG will realistically never be larger than 4GB and it needs to be aligned to its power-of-two size, the TSEG mask still only needs to affect the lower half of the corresponding MSR value. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1004b5e05a7dba83b76b93b3e7152aef7db58f4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-03-10soc/amd/common/block/psp/psp_smm: use raw MSR dataFelix Held
Since mst_t is a union of the struct containing the lower and higher 32 bits and the raw 64 bit value, there's no need to convert the lower and higher 32 bits into a 64 bit value and we can just use the 64 bit raw value. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5923df84f0eb3a28ba6eda4a06c7421f4459e560 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-03-10soc/amd/stoneyridge/monotonic_timer: use raw MSR dataFelix Held
Since mst_t is a union of the struct containing the lower and higher 32 bits and the raw 64 bit value, there's no need to convert the lower and higher 32 bits into a 64 bit value and we can just use the 64 bit raw value. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ibc5d64c74eaabfc4b7834a34410b48f590f78a12 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-03-10mp_init: Wait longer for APs to check inPatrick Rudolph
On IBM/SBP1 with 384 cores it takes a while for all APs to check in. Use linear scaling instead of hardcoding an arbitrary limit for the timeout. Change-Id: If020a3fa985bfc7fd2f0aa836dc04e6647a1a450 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Reviewed-by: TangYiwei Reviewed-by: Naresh <naresh.solanki.2011@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-03-10xeon_sp: Setup x2apic in SRATNaresh Solanki
Set up SRAT table in X2APIC mode when necessary. Change-Id: Ib8b4cebefe81f7b5514524dba2fa364eee4bb157 Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-03-10amdfwtool: Remove the option --list which nobody usesZheng Bao
It was used for printing the dependencies which is now taken by macro DEP_FILES in soc/amd/common/Makefile.inc. TEST=binary identical test on google/guybrush amd/chausie Change-Id: I1b86df2cb2ed178cf0a263c50ccb3e2254a3852b Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73627 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-10amdfwtool: Move PSP FWs padding into a loop for comboZheng Bao
Move main body of PSP padding into a loop which can add a new combo entry. In the loop, get the FW files from each fw.cfg, create new pack of PSP, and fill the combo header. Currently Feature COMBO is still not fully functional. But the non-combo case will not be affected for sure. The real changes are 1. Add a do-while loop. 2. Remove a "TODO" comment. All other changes are re-indenting and re-filling. Change-Id: I351192a4bc5ed9ec0bfa3f2073c9633b8b44246d Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58554 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-10mb/starlabs/starbook/adl: Enable ASPMSean Rhodes
Enable ASPM for RP5 (wireless) and RP9 (SSD). Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I428040caf171bdcfedc285cdeddc55bcbec40f3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/72753 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-10mb/google/skyrim/var/markarth: Add 2 Micron parts to RAM ID tableJohn Su
Add new ram_id:0011 for Micron MT62F1G32D2DS-023 WT:B. Add new ram_id:0100 for Micron MT62F2G32D4DS-023 WT:B. DRAM Part Name ID to assign K3KL8L80CM-MGCT 0 (0000) H58G56BK7BX068 0 (0000) MT62F1G32D2DS-026 WT:B 0 (0000) K3KL9L90CM-MGCT 1 (0001) H58G66BK7BX067 1 (0001) MT62F2G32D4DS-026 WT:B 1 (0001) MT62F512M32D2DR-031 WT:B 2 (0010) H58G56BK8BX068 3 (0011) MT62F1G32D2DS-023 WT:B 3 (0011) H58G66BK8BX067 4 (0100) MT62F2G32D4DS-023 WT:B 4 (0100) BUG=b:271188237 BRANCH=None TEST=FW_NAME=markarth emerge-skyrim coreboot Change-Id: I59a6a6dff249cd4fe982a4de824848f1bac0ecba Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73510 Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-10spd/lp5: Add 2 Micron memory partsJohn Su
Add Micron memory part MT62F1G32D2DS-023 and MT62F2G32D4DS-023 to LP5 global list. Attributes are derived from CCM005-1974498342-145. Also, regenerate the SPD files for the SoC. BUG=b:271188237 TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5 Change-Id: I6675a68b7a515bd6d21db3ea2da762b06dee017a Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73489 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-10mb/google/brya/var/omnigul: Fix SSD can not boot into OSJamie Chen
1. device ref pcie_rp11 -> pcie_rp9 on. BUG=b:270657362 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: If23785f42466ba94f33d4d15dde96de29dbb3a1e Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73530 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-10mb/google/brya/var/omnigul: Enable ELAN touchscreenDtrain Hsu
Enable ELAN eKTH5015M touchscreen. BUG=b:271966059 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I41eac949f21a48098b445f8d1b05f308672f7ab8 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-10mb/starlabs/starbook/{tgl,adl}: Set DmiMaxLinkSpeed to 4Sean Rhodes
Set DmiMaxLinkSpeed to 4 in FSP to ensure that FSP always supports PCIe Gen 4 drives. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I0e31919122dacfbdc2486fa8216a28b479f3bd00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-03-10amdfwtool: Add combo index and combo config tableZheng Bao
For now, combo index is 0, and only the first entry in config table is used. The index will grow when there are more combo entries. Add a command parameter to give fw.cfg for combo index 1. Process the combo config in the future loop. Change-Id: I00609d91defc08e17f937ac8339575f84b1bd37c Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73496 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-10amdfwtool: Add a wrapper function to open and process config fileZheng Bao
And move the additional processing to this new function. Change-Id: Id101d63e4d30a6e57ac1aa79665a4ba22b2956f1 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73509 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-10amdfwtool: Add HW IPCFG file whose subprog is 1Zheng Bao
And rename PSP_HW_IPCFG_FILE to PSP_HW_IPCFG_FILE_SUB0 Change-Id: Ia1ab8482074105de367905be2b4b0418066823d2 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73531 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-10soc/mediatek/mt8188: Enable lastbus debug hardwareot_zhenguo.li
Lastbus is a bus debug tool. When the bus hangs, the bus transmission information before resetting will be recorded. The watchdog cannot clear it and it will be printed out for bus hanging analysis. There are two versions for lastbus: Version 1 for MT8186, and version 2 for MT8188. BUG=b:263753374 TEST=build pass. Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2 Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com> Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-03-10src/soc/amd/phoenix/include/soc/: Update the Data Fabric ID for PhoenixAnand Vaikar
Change-Id: I078b57825377f97f9f5f2b607fa134e3a67e9685 Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: ritul guru <ritul.bits@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-10Revert "mb/google/skyrim: Create whiterun variant"Jon Murphy
For simplicity, OEM devices are given a single codename per build variant. Winterhold was intended to be the lead device and was chosen as the code name for this OEM. Unfortunately, Winterhold was cancelled. We attempted to rename Winterhold to Whiterun to avoid future confusion. Again, unfortunately, since some devices were already built, changing the name requires a manual change to force the firmware to be taken by the DUT. This was not a reasonable path forward, so we're abandoning the naming to Whiterun. This reverts commit af69de494e2c32140ce5e00a1562c2845345b1bf. Signed-off-by: Jon Murphy <jpmurphy@google.com> Change-Id: Idef95f0f4f369b235937e1806ce57c427e441f21 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73583 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-03-09soc/amd/common/cpu: move get_threads_per_core from noncar to common codeFelix Held
The get_threads_per_core function isn't specific to the non-CAR CPUs and also applies for Stoneyridge and even for family 16h model 30h outside of soc/amd, so move it from the non-CAR-specific cpu.c file to the common AMD SoC cpu.c file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I05946f163112ff93f33139f6c43fed5820fd0a3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/73615 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-09device/Kconfig: explain which PCI ID needs to be used for VGA_BIOS_IDFelix Held
Add a paragraph to the help text for VGA_BIOS_ID to explain which PCI ID needs to be used. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1a0f25481e275b7d190f29f5670cc98443dbe719 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73613 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-09soc/amd/common/cpu/Kconfig: use Cxxx as CPU string for all non-CAR SoCsFelix Held
Picasso already uses the Cxxx ACPI CPU device naming scheme, due to it being what the AGESA reference code uses. We initially relied on the AGESA/FSP generated SSDT for the P- and C-state support before we had a native implementation for this in coreboot. The Cxxx naming scheme can also be used for the other AMD SoCs except Stoneyridge which is pre-Zen and doesn't select SOC_AMD_COMMON_BLOCK_NONCAR. The main advantage of using Cxxx instead of CPxx is that the Cxxx scheme supports systems with more than 256 CPU threads. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I884f5c0f234b5a3942dacd60847b2f095f9c0704 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73620 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09util/amdfwtool: Add option to indicate uncompressed BIOS binaryKarthikeyan Ramasubramanian
amdfwtool always assumes that the PSP BIOS binary (type 0x62 BIOS directory entry) is always compressed. On boards using vboot, sometimes PSP BIOS binary is uncompressed - specifically when CBFS verification is enabled and verified boot starts in bootblock. Add an option to indicate PSP BIOS binary is uncompressed. BUG=b:261792282 TEST=Build Skyrim BIOS with x86 verstage and CBFS Verification enabled. Boot to OS. Change-Id: I4d56c0ba451b194043ebb5cdb0f2b27482beef1f Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-03-09soc/intel/xeon_sp: rework lock_pam0123() to accomodate hidden SAD deviceJonathan Zhang
For Intel SPR-SP, the SAD device is hidden, so pcidev_path_on_bus() returns NULL. Therefore use pci_s_write_config32() instead. Move lock_pam0123() from finalize.c to util.c, to be together with unlock_pam_regions(). Change-Id: Ib08d423d8c4d482612077b66dab3878018da8f2b Signed-off-by: Jonathan Zhang <jonzhang@meta.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72432 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2023-03-09soc/intel/xeon_sp: use get_socket_ubox_busno() to hide soc specificsJonathan Zhang
Intel SPR-SP has its specific way to get the bus number of ubox. Move the current implementations to CPX-SP and SKX-SP folders. Change-Id: I2b69be74d140115f9f78bc991fb690e3c90c88db Signed-off-by: Jonathan Zhang <jonzhang@meta.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2023-03-09Revert "ec/starlabs/merlin: Add support for enabling the mirror flag"Sean Rhodes
This reverts commit b42ca4d0b2fafe7214396d30a1a833ac33cf85bc. Reason for revert: The mirror flag "0x01" is mirror once, which relies on the EC remembering that it's been mirrored. However, the EC forgets this if it's been without power for 20 minutes or so. Even if power is connected then, it'll instantly try to mirror and it can't charge whilst doing it. It can either result in incomplete EC firmware, or a loop where it's constantly trying to mirror. Change-Id: I79da9143cc63459e7e29431eff2cb14200424b37 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-03-09Revert "mb/starlabs/*: Enable the Mirror flag for boards that support"Sean Rhodes
This reverts commit 35354583cdc94ced026975ced5170e1c094b258e. Reason for revert: The mirror flag "0x01" is mirror once, which relies on the EC remembering that it's been mirrored. However, the EC forgets this if it's been without power for 20 minutes or so. Even if power is connected then, it'll instantly try to mirror and it can't charge whilst doing it. It can either result in incomplete EC firmware, or a loop where it's constantly trying to mirror. Change-Id: Ie82cbafd4bea2416526e2847738802a05ed45582 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2023-03-09device/pci_rom: rework PCI ID remapping in pci_rom_probeFelix Held
Only call cbfs_boot_map_optionrom/cbfs_boot_map_optionrom_revision once and pass the already remapped PCI ID to it. This avoids the spurious warning that the CBFS file wasn't found from the first cbfs_boot_map_optionrom call in cases where the PCI ID needs to be remapped to get the right ID for which a file in CBFS exists. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If7da78c69dd702280a78996a5823972516e0319b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73612 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09mb/google/guybrush: Store XHCI resourcesRobert Zieba
Implement `smm_mainboard_pci_resource_store_init` to store the resources for XHCI devices. These stored resources are later used by the elog code to log XHCI wake events. Example elog contents: ``` 250 | 2022-10-11 16:04:49 | S0ix Enter 251 | 2022-10-11 16:04:53 | S0ix Exit 252 | 2022-10-11 16:04:53 | Wake Source | GPE # | 31 253 | 2022-10-11 16:04:53 | Wake Source | PME - XHCI (USB 2.0 port) | 1 254 | 2022-10-11 16:05:24 | S0ix Enter 255 | 2022-10-11 16:05:27 | S0ix Exit 256 | 2022-10-11 16:05:27 | Wake Source | GPE # | 31 257 | 2022-10-11 16:05:27 | Wake Source | PME - XHCI (USB 2.0 port) | 257 ``` BRANCH=guybrush BUG=b:186792595 TEST=Ran on nipperkin, verified that XHCI wake events show up in elog Change-Id: I1d0911df9e3102791bf7b5723ac38e2ba82a9db6 Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68326 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09soc/amd/cezanne: Set up SoC-specific XHCI definitionsRobert Zieba
Set up SoC-specific XHCI defines and enable SOC_AMD_COMMON_BLOCK_XHCI. BRANCH=guybrush BUG=b:186792595 TEST=builds Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I15e9c06cd38ac858b861a4d19626664704af7541 Reviewed-on: https://review.coreboot.org/c/coreboot/+/67939 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09soc/amd/cezanne: Update XHCI GPE to use constantRobert Zieba
The GPE number used for XHCI has now been defined in AMD's common code in CB:67936. Change over existing code to use this new definition. BRANCH=guybrush BUG=b:186792595 TEST=Ran on nipperkin device and verified that XHCI events string use GPE 31. Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I9c2a44f7d2eb47422ae8c585e5e01ea0b420d461 Reviewed-on: https://review.coreboot.org/c/coreboot/+/69917 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09mb/google/skyrim: Store XHCI PCI resourcessRobert Zieba
Implement `smm_mainboard_pci_resource_store_init` to store the resources for XHCI devices. These stored resources are later used by the elog code to log XHCI wake events. Example elog contents: ``` 244 | 2022-10-11 15:49:24 | S0ix Enter 245 | 2022-10-11 15:49:29 | S0ix Exit 246 | 2022-10-11 15:49:29 | Wake Source | GPE # | 31 247 | 2022-10-11 15:49:29 | Wake Source | PME - XHCI (USB 2.0 port) | 256 248 | 2022-10-11 15:50:08 | S0ix Enter 249 | 2022-10-11 15:50:16 | S0ix Exit 250 | 2022-10-11 15:50:16 | Wake Source | GPE # | 31 251 | 2022-10-11 15:50:16 | Wake Source | PME - XHCI (USB 2.0 port) | 257 ``` BUG=b:186792595 TEST=Ran on skyrim proto, verified that wake events show in elog Change-Id: I529f541a8932267a8825773ddc582beafb27da63 Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68325 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09soc/amd/mendocino: Set up SoC-specific XHCI definesRobert Zieba
Set up SoC-specific XHCI defines and enable SOC_AMD_COMMON_BLOCK_XHCI. BUG=b:186792595 TEST=builds Change-Id: I16c789ff673c26ded84e4d46ab6dc743f33c5bb7 Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67938 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09soc/amd/mendocino: Update XHCI GPE to use constantRobert Zieba
The GPE number used for XHCI has now been defined in AMD's common code in CB:67936. Change over existing code to use this new definition. BUG=b:186792595 TEST=Ran on skyrim device and verified XHCI GPE setting. Signed-off-by: Robert Zieba <robertzieba@google.com> Change-Id: I3bfc2256ea2ca851afe88f2cdb419f39eee76fdd Reviewed-on: https://review.coreboot.org/c/coreboot/+/69916 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09soc/amd/common/xhci: Add support for logging XHCI wake eventsRobert Zieba
AMD SoCs currently only log the GPE# when an XHCI controller wakes the system. Add code to log XHCI wake events to the elog. BRANCH=guybrush BUG=b:186792595 TEST=builds Change-Id: Ic0489e1df55c4e63cb8a306099e3f31c82eebd58 Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-03-09util/ifdtool/ifdtool.c: Clean upMaximilian Brune
- Remove functions that are only called in one place. - Add warning if user doesn't supply a platform, since that can lead to dumps/layouts that do not include all IFD regions without the user even reliazing it. - Inform the User if IFD or Flashmap is not found. - Inform the User if there is not a single match between FMAP and IFD region - Avoid printing usage if not specifically asked by the user. It tends to obfuscate the original error message. - Keep indentation consistent throughout the file. - Remove typedefs (coreboot coding style) Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I7bbce63ecb2e920530394766f58b5ea6f72852e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73448 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-03-09mb/google/skyrim: override winterhold PCIe configMartin Roth
Winterhold boards populate either NVMe or eMMC, but not both. This means that there is always one link that is unpopulated. The PCIe configuration code takes longer to verify that a link is unpopulated than to just train the link, so this slows down the boot by roughly 80ms vs the case when the device is present. Not training the device at all lowers boot time by another 20ms, for a total of 100ms saved. Looking at the NVMe CLKREQ signal before initializing the ports allows us to identify which device is populated and only initialize that device. BUG=b:271569628 TEST=Boot Whiterun and eMMC or NVMe correctly work, boot time is lower. BRANCH=skyrim Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I0b87f5e968cd1c87e62a1c0fbdee1fc0723f655d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73441 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-03-09mb/google/skyrim: drop link_hotplug from port descriptorsMatt DeVillier
These ports are not hot pluggable, so drop the parameter, which will result it in being set to zero / not enabled. BUG=none TEST=build boot skyrim, verify all PCIe devices functional. BRANCH=skyrim Change-Id: Iaa55cc765e8f073b31f25771633789ac13e2fffa Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2023-03-09mb/google/skyrim: Enable L1 ASPM substates for PCIe devicesMatt DeVillier
Enable both L1.1 and L1.2 substates for the WiFi, SD card reader, and SSD (both NVMe and eMMC). If a given device does not support a particular substate, then it will not be enabled during PCIe enumeration by coreboot. BUG=b:270690572 TEST=build/boot multiple skyrim/whiterun/frostflow SKUs with different storage configs, verify WiFi/SD card/SSD all functional and have L1 substates enabled insofar as they are supported by the device. BRANCH=skyrim Change-Id: Ib84df8b9d97282ae696414e52c4a65cfb0a81194 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73438 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2023-03-09mb/google/skyrim: Allow port descriptors to be overriddenMartin Roth
This allows variants to override the skyrim port descriptors. BUG=None TEST=Tested with following patches BRANCH=skyrim Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I8cff44f5b39d130a7191a69970cae8a88bb5d475 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-03-09soc/intel/broadwell/gma: don't unconditionally remap all GPU PCI IDsFelix Held
This fixes the case where a Broadwell CPU is combined with an AMD or NVIDIA GPU would result in using the Broadwell GPU VBIOS file from CBFS for the discrete GPU too. A further improvement would be to use a list of the Intel iGPU PCI IDs like it is done in the Skylake code. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3eb50cb9a0539255d50e5cd8163f10c3a062cc4d Reviewed-on: https://review.coreboot.org/c/coreboot/+/73611 Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-03-09amdfwtool: move FW_MPIO to PSP Dir Level 2 where it belongsNikolai Vyssotski
Type 0x5d (MPIO Firmware) was mistakenly placed to PSP Level 1 directory. It should be in Level 2 PSP directory instead. Change-Id: Ic5ea00859f1055e0c91600c5f941c5d3acca36e2 Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bao Zheng <fishbaozi@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-09soc/intel: Update API name `pmc_send_bios_reset_pci_enum_done`Subrata Banik
This patch updates PMC API name from `pmc_send_pci_enum_done` to `pmc_send_bios_reset_pci_enum_done` to inform PMC IPC about BIOS done is also set along with PMC enumeration being done. BUG=b:270942083 TEST=Able to build and boot google/rex. Change-Id: I1cf8cb1ecadeb68c109be6b0e751a3f2c448ae4f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-03-09mb/google/dedede/var/kracko: Generate new SPD ID for new memory partsRobert Chen
Add new memory parts in memory_parts_used.txt and generate SPD id for these parts: Hynix H54G46CYRBX267 Samsung K4U6E3S4AB-MGCL BUG=b:272173189 TEST=run part_id_gen to generate SPD id Change-Id: I141bda6eda3f658ca608c86ad0b320d018598514 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73554 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09amdfwtool: Support multiple inst entriesFred Reitberger
Use the inst field when adding entries to the psp tables. Otherwise, entries that differ by the inst field will appear as duplicates with an inst of 0. Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Change-Id: I4a84a0730976f4c65902b5c24ed13e21e95b03bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/73522 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-03-09mb/google/brya/var/marasov: Half touch power-on delay to 150 msFrank Chu
Decrease Touch i2c delay during power-on sequence from 300 ms to 150 ms to make S0ix resume time meet requirement. BUG=b:264199989 TEST=Run the following test from chroot. test_that -b {BOARD_NAME} {device IP} f:.*power_UiResume/control Check seconds_system_resume value less than 500 msec Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ib81a9c1a90589b8b08e6ce6471db2abef96047ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/73532 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-09mb/asrock/b75pro3-m: Advertise RTL NIC as onboard ethernet deviceFabian Groffen
Move the onboard Realtek NIC definition to a child device of PCIe port 6. This makes sure it is advertised as "onboard", such that it appears as eno0 on systemd/udev-based systems. This commit is very similar to https://review.coreboot.org/c/coreboot/+/73516 Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I0550ee9faddd65011ad914aef413a6d1b316c5ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/73519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2023-03-08cpu/x86,amd: drop unused LOGICAL_CPUS Kconfig symbolFelix Held
The LOGICAL_CPUS Kconfig option is always true and also not user- configurable, so it can be dropped. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie4866de003058ec0f99495b405e26dfd7ba1fa28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-08mb/google/skyrim: Enable SPL fusing on whiterun/winterholdMartin Roth
Enable whiterun/winterhold platforms to send the fuse SPL (security patch level) command to the PSP. BUG=b:254568112 TEST=On a platform that supports SPL fusing, a message indicating that fusing was requested will appear in the coreboot console log, followed by a puff of smoke when the fuse is set and the message "OK" again on the debug console. (Kidding about the smoke.) BRANCH=skyrim Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I45578597234ba672c89ac421b4626088faca27d5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72914 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2023-03-08soc/amd/common/psp: Check more error bits before SPL fusingMartin Roth
This adds checks for three more error bits before requesting that the SPL fuses are updated. - While I'm here, I'm adding the include of types.h which was previously done through other include files, but should be done independently. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I87a7d40850c4e9ddbb2d1913c1588a919fdb29d2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73518 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-03-08soc/amd/common/psp: Only set SPL fuses if an SPL file is presentMartin Roth
Use the presence of an SPL (Software Patch Level) file to trigger the function that reads and writes the SPL fuses. The current Kconfig option will be used to decide to write the fuses. This allows us to see the state of the SPL update bit which determines whether or not SPL fusing is allowed and needed before enabling the fusing. - Refactor a bit to prepare for following changes. - Update phrasing Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I7bd2798b984673a4bd3c72f3cab52f1c9a786c67 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-03-08soc/amd: factor out ACPI_SSDT_PSD_INDEPENDENT to common AMD ACPI KconfigFelix Held
Now that the code using the ACPI_SSDT_PSD_INDEPENDENT Kconfig symbol is moved to soc/amd/common/block/acpi/cpu_power_state.c, also move the Kconfig symbol to the Kconfig file in this directory. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ide18111df38d4e9c81f7d183f49107f382385d85 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-03-08soc/amd/common/block/acpi/cpu_power_state: introduce get_cstate_io_baseFelix Held
Introduce the get_cstate_io_base helper function that write_cstate_entry can call directly to get the C state control IO base address instead of having get_cstate_info pass this Io address to each write_cstate_entry call. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I4cc80ded0a2fbc2dee9ca819e86284d9ffd58685 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-08soc/amd/include/msr: factor out P state MSR enable bit to cpu/amd/msr.hFelix Held
The bit position of the P state enable bit in the 8 P state MSRs is identical for all AMD chips including the family 16h model 30h APU that lives outside of soc/amd. The other bits in those 8 MSRs are more or less family- and model-specific. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia69c33e28e2a91ff9a9bfe95859c1fd454921b77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-08vc/intel/fsp/mtl: Update header files from 2523_80 to 3064_81Kilari Raasi
Update header files for FSP for Meteor Lake platform to version 3064_81, previous version being 2523_80.. FSPM: 1. Addition of new UPDs SocTraceHubMode,SocTraceHubMemReg0Size SocTraceHubMemReg1Size. 2. Remove depricated UPD RDODTT. 3. Address offset changes. FSPS: 1. Address offset changes. FspUpd.h: 1.Corrected UPD signatures. BUG=b:TBD Signed-off-by: Kilari Raasi <kilari.raasi@intel.com> Change-Id: I73764d471295ad1a969ae562fe8a9fb7a25c5b2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/73374 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 19:17:32 +0000