| Age | Commit message (Collapse) | Author |
|---|
|
If recovery APCB is not passed, amdfwtool will build amdfw*.rom with
AMD_BIOS_APCB_BK entry pointing to the same offset as AMD_BIOS_APCB
entry. This will help to save 40 KiB flash space in each FW slot. On
ChromeOS, this means saving ~120 KiB flash space.
BUG=b:240696002
TEST=Build and boot to OS in Skyrim.
Change-Id: Ib3bbc1eededae20b2cd48f514722a207c46536a0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73662
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If Recovery/Backup APCB is not passed, then AMD_BIOS_APCB_BK entry is
not populated. But PSP expects that bios directory entry to be
populated. Also on mainboards where both APCB and recovery APCB are same
(eg. Skyrim), 2 copies of the same APCB are added to amdfw*.rom. Update
amdfwtool to support not passing recovery/backup APCB. If the recovery
APCB is not passed, then populate AMD_BIOS_APCB_BK entry and make it
point to the same offset as AMD_BIOS_APCB entry.
BUG=b:240696002
TEST=Build and boot to OS in Skyrim. Ensure that the device can enter
recovery mode. Perform multiple suspend/resume cycles.
Change-Id: I031ba817573cd35160f5e219b1b373ddce69aa6b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73661
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On newer SoCs the initial alignment is not required. So skip initial
alignment. This saves 64 KiB flash space on each firmware slots. This
also saves ~5 ms while loading amdfw.rom
BUG=b:240696002
TEST=Build and boot to OS in Skyrim.
Change-Id: I27cbfde2d7d58b62a4c0039c60babc3fb3bd95fa
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73654
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I97c8c07db9b44aa89b433e7962ec77c8501ecaa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I8f8a0bfeaea508d3b4ad1b3fe2e68742cbab5570
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73687
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Icd3d16ab2cb34dc81fc12ec139c52ecaa170528d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73686
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I1fe6072a3c23a02c9a691406f179bfc8f0f18a93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Currently on power key long press, PMIC will be reset. It would cause
an unwanted reset pulse in the power-off sequence. To match expected
sequence, change PMIC behavior to "force shutdown".
BUG=b:271771606
TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse
BRANCH=corsola
Change-Id: I9ab35d82e57f43bac99fa8bd7bb69fcf52250311
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73705
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently on power key long press, PMIC will be reset. It would cause
an unwanted reset pulse in the power-off sequence. To match expected
sequence, change PMIC behavior to "force shutdown".
BUG=b:271771606
TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse
Change-Id: I1626892fd582dfab8fe1c1ede1da00549bc97142
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73704
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Modify USB C1 mux_conn to 1. It should match ec settings.
BUG=b:272394875, b:272667290
BRANCH=firmware-brya-14505.B
TEST=Plug USB-C hub in USB C1 and could recognize USB drive and hdmi.
Change-Id: I61b77405d1790b044174cef954e5bf910141f424
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1. Modify irq_gpio GPP_H0 -> GPP_A23
BUG=b:272218750
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I8e178b149015ed8027b547e4c2109b3aef8a7484
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
1. Add generic.stop_gpio = GPP_C6
2. Add c.stop_off_delay_ms = 2
BUG=b:271966059
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I33857443d8a68e7b50ac5f8f08afc017fe4f5a59
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
According to file thermal_table_0310, adjust the STT settings.
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Change-Id: If4500c85dcea051aca15602f1fb4b5ec80b73e67
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
Configure the I2C bus high and low time for audio.
BUG=b:271804915
BRANCH=dedede
TEST=Build and confirm I2C clock for audio is between 380 kHz and 400
kHz
Change-Id: I2987a39abc5527844424edfa1cf70d5c5cea5357
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Create the uldren variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:271513530
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_ULDREN
Change-Id: Ibbcd34fb4ef1f7464f0c94d2fcf75280c3eed6be
Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73680
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Meteor Lake decides to enable early caching of the TOM region to
optimize the boot time by selecting `SOC_INTEL_COMMON_BASECODE_TOM`
config.
TEST=Able to build and boot google/rex to ChromeOS and reduce the boot
time by 77 ms.
Without this patch:
950:calling FspMemoryInit 936,811 (19,941)
951:returning from FspMemoryInit 1,041,935 (105,123)
With this patch:
950:calling FspMemoryInit 905,108 (20,103)
951:returning from FspMemoryInit 964,038 (59,929)
Change-Id: Iebb3485b052386b43d5bccd67a04e6115cbcc20d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73274
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables early caching of TOM region to optimize the boot
time if valid mrc cache is found (i.e. except the first boot after
flashing/updating few AP firmware image).
TEST=Able to build and boot google/rex to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia575ad0f99d5b0fd015e40b0862e8560700f6c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch uses the IA common code API to store the top_of_ram (TOM)
address intonon-volatile space (CMOS).
The code logic will update the TOM address in CMOS NVS if the
`top_of_ram` address is calculated differently in any boot and
also takes care of caching the updated range.
TEST=Able to build and boot google/rex to ChromeOS.
First boot:
Before calling into FSP-M
[DEBUG] 0x00000000fef00006: PHYBASE0: Address = 0x00000000fef00000, WB
[DEBUG] 0x00003ffffff80800: PHYMASK0: Length = 0x0000000000080000, Valid
[DEBUG] 0x00000000fef80006: PHYBASE1: Address = 0x00000000fef80000, WB
[DEBUG] 0x00003ffffffc0800: PHYMASK1: Length = 0x0000000000040000, Valid
[DEBUG] 0x00000000ff000005: PHYBASE2: Address = 0x00000000ff000000, WP
[DEBUG] 0x00003fffff000800: PHYMASK2: Length = 0x0000000001000000, Valid
[DEBUG] 0x00000000f9800005: PHYBASE3: Address = 0x00000000f9800000, WP
[DEBUG] 0x00003fffff800800: PHYMASK3: Length = 0x0000000000800000, Valid
...
[DEBUG] tom_table invalid signature
[DEBUG] top_of_ram = 0x76000000
[DEBUG] Updated the TOM address into CMOS 0x76000000
On consecutive boot:Before calling into FSP-M:
The TOM region is already cached.
[DEBUG] 0x00000000fef00006: PHYBASE0: Address = 0x00000000fef00000, WB
[DEBUG] 0x00003ffffff80800: PHYMASK0: Length = 0x0000000000080000, Valid
[DEBUG] 0x00000000fef80006: PHYBASE1: Address = 0x00000000fef80000, WB
[DEBUG] 0x00003ffffffc0800: PHYMASK1: Length = 0x0000000000040000, Valid
[DEBUG] 0x00000000ff000005: PHYBASE2: Address = 0x00000000ff000000, WP
[DEBUG] 0x00003fffff000800: PHYMASK2: Length = 0x0000000001000000, Valid
[DEBUG] 0x00000000f9800005: PHYBASE3: Address = 0x00000000f9800000, WP
[DEBUG] 0x00003fffff800800: PHYMASK3: Length = 0x0000000000800000, Valid
[DEBUG] 0x0000000075000005: PHYBASE4: Address = 0x0000000075000000, WP
[DEBUG] 0x00003fffff000800: PHYMASK4: Length = 0x0000000001000000, Valid
Change-Id: I2569495570652c488096f6a29f58dd8f0103af9d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73273
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements a module that can store the top_of_ram (TOM)
address into non-volatile space (CMOS) during the first boot and
use it across all consecutive boot.
As top_of_ram address is not known until FSP-M has exited, it
results into lacking of MTRR programming to cache the 16 MB TOM,
hence accessing that range during FSP-M and/or late romstage causing
long access times.
Purpose of this driver code is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
TEST=Able to build and boot google/rex to ChromeOS.
Without this patch:
950:calling FspMemoryInit 936,811 (19,941)
951:returning from FspMemoryInit 1,041,935 (105,123)
With this patch:
950:calling FspMemoryInit 905,108 (20,103)
951:returning from FspMemoryInit 987,038 (81,929)
Change-Id: I29d3e1df91c6057280bdf7fb6a4a356db31a408f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73272
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
If we need to put a CBFS chunk into a specific region, add a line in
any Makefile.inc
regions-for-file-xxx=region_name
TODO:Do a complete binary identical test for all the mainboards.
Change-Id: Ie37a8a9230dc8b8e5664be8806f047afb94fba69
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Documentation and hardware differ in the number of MCA bank names, so
remove the excess ones to prevent a "CPU has an unexpected number of MCA
banks!" warning message.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I75a2348561833f3f19181b4f30a6971ecb317899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, the address of the microcode update can
be directly written to the raw value instead of needing to split it into
the lower and higher 32 bits and assigning those separately.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c84164e81477040a4b7810552d3d65c0e3656b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, the address of the bootblock_resume_entry
can be directly written to the raw value instead of needing to split it
into the lower and higher 32 bits and assigning those separately.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7ebab1784ec592e18c29001b1cf3ee7790615bf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
fix compilation on musl-libc systems by providing an implementation
for __always_inline
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I01a7eb9ed28e79523623ab362510ec2d93f4a8b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73667
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running
`clflush` to invalidate the cache region.
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6b2dce39f82e28cd99ad8621c78bae494c4f16ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73333
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When cbmem is initialized in romstage and postcar placed in the stage
cache + cbmem where it is run, the assumption is made that these are
all in UC memory such that calling INVD in postcar is OK.
For performance reasons (e.g. postcar decompression) it is desirable
to cache cbmem and the stage cache during romstage.
Another reason is that AGESA sets up MTRR during romstage to cache all
dram, which is currently worked around by using additional MTRR's to
make that UC.
TESTED on asus/p5ql-em, up/squared on both regular and S3 resume
bootpath. Sometimes there are minimal performance improvements
when cbmem is cached (few ms).
Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37196
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6f2047e62c1e999823bf98acaf3530aa62478449
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
|
|
Change stop_delay_ms time(T3) from 180 to 150 to meet specification.
T3 min-value of HID-I2C should be 150ms.
BUG=b:267280863
TEST=emerge-skyrim coreboot chromeos-bootimage.
Change-Id: I7ef7db4edaecece1fa5ab07e30a80e556ed35f8b
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Allow USB2/3 hotplug event to wake up S0ix.
BUG=b:236189998
BRANCH=firmware-brya-14505.B
TEST=Verify USB-A device could wake up Kinox
Change-Id: I8aeeeac6c21289b70bdc7ffddc57687ac39e8456
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
use __linux__ instead of __GLIBC__ guard for Linux-specific includes
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ifbf4552591c0df7811c5b37a9207c0901b6fd68f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73666
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- use __linux__ instead of __GLIBC__ guard for Linux-specific includes
- use POSIX ioperm instead of deprecated iopl
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I99613007aa9feddcb1041f31085cdeb195ff7a68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Get string of hex value of a given number.
Change-Id: I6d3525db19089938897b9d19ad9875bb07e0eecf
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This separates the SPL fusing function into a separate C file which can
be excluded if it is not needed. This allows the psp_set_spl_fuse()
function to be made static again as the state of the function will
always match the boot_state entry.
Move the required #defines to the common header file so they can be
used by both psp_gen2.c & spl_fuse.c.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ifbc774a370dd35a5c1e82f271816e8a036745ad5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73655
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Even though right now TSEG will always be located below 4GB, better not
make assumptions in the SMM relocation code. Instead of clearing the
higher 32 bits and just assigning the TSEG base and per-core SMM base to
the lower 32 bits of the MSR, assign those two base addresses to the raw
64 bit MSR value to not truncate the base addresses. Since TSEG will
realistically never be larger than 4GB and it needs to be aligned to its
power-of-two size, the TSEG mask still only needs to affect the lower
half of the corresponding MSR value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1004b5e05a7dba83b76b93b3e7152aef7db58f4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5923df84f0eb3a28ba6eda4a06c7421f4459e560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibc5d64c74eaabfc4b7834a34410b48f590f78a12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On IBM/SBP1 with 384 cores it takes a while for all APs
to check in. Use linear scaling instead of hardcoding an
arbitrary limit for the timeout.
Change-Id: If020a3fa985bfc7fd2f0aa836dc04e6647a1a450
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: TangYiwei
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Set up SRAT table in X2APIC mode when necessary.
Change-Id: Ib8b4cebefe81f7b5514524dba2fa364eee4bb157
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It was used for printing the dependencies which is now taken by macro
DEP_FILES in soc/amd/common/Makefile.inc.
TEST=binary identical test on google/guybrush amd/chausie
Change-Id: I1b86df2cb2ed178cf0a263c50ccb3e2254a3852b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73627
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move main body of PSP padding into a loop which can add a new combo
entry. In the loop, get the FW files from each fw.cfg, create new pack
of PSP, and fill the combo header. Currently Feature COMBO is still
not fully functional. But the non-combo case will not be affected for
sure.
The real changes are
1. Add a do-while loop.
2. Remove a "TODO" comment.
All other changes are re-indenting and re-filling.
Change-Id: I351192a4bc5ed9ec0bfa3f2073c9633b8b44246d
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58554
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ASPM for RP5 (wireless) and RP9 (SSD).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I428040caf171bdcfedc285cdeddc55bcbec40f3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72753
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:0011 for Micron MT62F1G32D2DS-023 WT:B.
Add new ram_id:0100 for Micron MT62F2G32D4DS-023 WT:B.
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
MT62F512M32D2DR-031 WT:B 2 (0010)
H58G56BK8BX068 3 (0011)
MT62F1G32D2DS-023 WT:B 3 (0011)
H58G66BK8BX067 4 (0100)
MT62F2G32D4DS-023 WT:B 4 (0100)
BUG=b:271188237
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: I59a6a6dff249cd4fe982a4de824848f1bac0ecba
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73510
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Micron memory part MT62F1G32D2DS-023 and MT62F2G32D4DS-023 to LP5
global list. Attributes are derived from CCM005-1974498342-145. Also,
regenerate the SPD files for the SoC.
BUG=b:271188237
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Change-Id: I6675a68b7a515bd6d21db3ea2da762b06dee017a
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1. device ref pcie_rp11 -> pcie_rp9 on.
BUG=b:270657362
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: If23785f42466ba94f33d4d15dde96de29dbb3a1e
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73530
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ELAN eKTH5015M touchscreen.
BUG=b:271966059
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I41eac949f21a48098b445f8d1b05f308672f7ab8
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Set DmiMaxLinkSpeed to 4 in FSP to ensure that FSP always supports
PCIe Gen 4 drives.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0e31919122dacfbdc2486fa8216a28b479f3bd00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For now, combo index is 0, and only the first entry in config table is
used. The index will grow when there are more combo entries.
Add a command parameter to give fw.cfg for combo index 1. Process the
combo config in the future loop.
Change-Id: I00609d91defc08e17f937ac8339575f84b1bd37c
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
And move the additional processing to this new function.
Change-Id: Id101d63e4d30a6e57ac1aa79665a4ba22b2956f1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73509
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
And rename PSP_HW_IPCFG_FILE to PSP_HW_IPCFG_FILE_SUB0
Change-Id: Ia1ab8482074105de367905be2b4b0418066823d2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Lastbus is a bus debug tool. When the bus hangs, the bus transmission
information before resetting will be recorded.
The watchdog cannot clear it and it will be printed out for bus hanging
analysis.
There are two versions for lastbus:
Version 1 for MT8186, and version 2 for MT8188.
BUG=b:263753374
TEST=build pass.
Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2
Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I078b57825377f97f9f5f2b607fa134e3a67e9685
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
For simplicity, OEM devices are given a single codename per build variant. Winterhold was intended to be the lead device and was chosen as the code name for this OEM. Unfortunately, Winterhold was cancelled. We attempted to rename Winterhold to Whiterun to avoid future confusion. Again, unfortunately, since some devices were already built, changing the name requires a manual change to force the firmware to be taken by the DUT. This was not a reasonable path forward, so we're abandoning the naming to Whiterun.
This reverts commit af69de494e2c32140ce5e00a1562c2845345b1bf.
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Change-Id: Idef95f0f4f369b235937e1806ce57c427e441f21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73583
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The get_threads_per_core function isn't specific to the non-CAR CPUs and
also applies for Stoneyridge and even for family 16h model 30h outside
of soc/amd, so move it from the non-CAR-specific cpu.c file to the
common AMD SoC cpu.c file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I05946f163112ff93f33139f6c43fed5820fd0a3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73615
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add a paragraph to the help text for VGA_BIOS_ID to explain which PCI ID
needs to be used.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1a0f25481e275b7d190f29f5670cc98443dbe719
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73613
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Picasso already uses the Cxxx ACPI CPU device naming scheme, due to it
being what the AGESA reference code uses. We initially relied on the
AGESA/FSP generated SSDT for the P- and C-state support before we had a
native implementation for this in coreboot. The Cxxx naming scheme can
also be used for the other AMD SoCs except Stoneyridge which is pre-Zen
and doesn't select SOC_AMD_COMMON_BLOCK_NONCAR. The main advantage of
using Cxxx instead of CPxx is that the Cxxx scheme supports systems with
more than 256 CPU threads.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I884f5c0f234b5a3942dacd60847b2f095f9c0704
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73620
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
amdfwtool always assumes that the PSP BIOS binary (type 0x62 BIOS
directory entry) is always compressed. On boards using vboot, sometimes
PSP BIOS binary is uncompressed - specifically when CBFS verification is
enabled and verified boot starts in bootblock. Add an option to indicate
PSP BIOS binary is uncompressed.
BUG=b:261792282
TEST=Build Skyrim BIOS with x86 verstage and CBFS Verification enabled.
Boot to OS.
Change-Id: I4d56c0ba451b194043ebb5cdb0f2b27482beef1f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
For Intel SPR-SP, the SAD device is hidden, so pcidev_path_on_bus()
returns NULL. Therefore use pci_s_write_config32() instead.
Move lock_pam0123() from finalize.c to util.c, to be together with
unlock_pam_regions().
Change-Id: Ib08d423d8c4d482612077b66dab3878018da8f2b
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72432
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Intel SPR-SP has its specific way to get the bus number of ubox.
Move the current implementations to CPX-SP and SKX-SP folders.
Change-Id: I2b69be74d140115f9f78bc991fb690e3c90c88db
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72403
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This reverts commit b42ca4d0b2fafe7214396d30a1a833ac33cf85bc.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: I79da9143cc63459e7e29431eff2cb14200424b37
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72678
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This reverts commit 35354583cdc94ced026975ced5170e1c094b258e.
Reason for revert: The mirror flag "0x01" is mirror once, which
relies on the EC remembering that it's been mirrored. However, the
EC forgets this if it's been without power for 20 minutes or so.
Even if power is connected then, it'll instantly try to mirror and
it can't charge whilst doing it. It can either result in
incomplete EC firmware, or a loop where it's constantly trying to
mirror.
Change-Id: Ie82cbafd4bea2416526e2847738802a05ed45582
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Only call cbfs_boot_map_optionrom/cbfs_boot_map_optionrom_revision once
and pass the already remapped PCI ID to it. This avoids the spurious
warning that the CBFS file wasn't found from the first
cbfs_boot_map_optionrom call in cases where the PCI ID needs to be
remapped to get the right ID for which a file in CBFS exists.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If7da78c69dd702280a78996a5823972516e0319b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73612
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement `smm_mainboard_pci_resource_store_init` to store the
resources for XHCI devices. These stored resources are later used by
the elog code to log XHCI wake events.
Example elog contents:
```
250 | 2022-10-11 16:04:49 | S0ix Enter
251 | 2022-10-11 16:04:53 | S0ix Exit
252 | 2022-10-11 16:04:53 | Wake Source | GPE # | 31
253 | 2022-10-11 16:04:53 | Wake Source | PME - XHCI (USB 2.0 port) | 1
254 | 2022-10-11 16:05:24 | S0ix Enter
255 | 2022-10-11 16:05:27 | S0ix Exit
256 | 2022-10-11 16:05:27 | Wake Source | GPE # | 31
257 | 2022-10-11 16:05:27 | Wake Source | PME - XHCI (USB 2.0 port) | 257
```
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on nipperkin, verified that XHCI wake events show up in elog
Change-Id: I1d0911df9e3102791bf7b5723ac38e2ba82a9db6
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68326
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set up SoC-specific XHCI defines and enable SOC_AMD_COMMON_BLOCK_XHCI.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I15e9c06cd38ac858b861a4d19626664704af7541
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67939
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPE number used for XHCI has now been defined in AMD's common code
in CB:67936. Change over existing code to use this new definition.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on nipperkin device and verified that XHCI events string use
GPE 31.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I9c2a44f7d2eb47422ae8c585e5e01ea0b420d461
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69917
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement `smm_mainboard_pci_resource_store_init` to store the
resources for XHCI devices. These stored resources are later used by
the elog code to log XHCI wake events.
Example elog contents:
```
244 | 2022-10-11 15:49:24 | S0ix Enter
245 | 2022-10-11 15:49:29 | S0ix Exit
246 | 2022-10-11 15:49:29 | Wake Source | GPE # | 31
247 | 2022-10-11 15:49:29 | Wake Source | PME - XHCI (USB 2.0 port) | 256
248 | 2022-10-11 15:50:08 | S0ix Enter
249 | 2022-10-11 15:50:16 | S0ix Exit
250 | 2022-10-11 15:50:16 | Wake Source | GPE # | 31
251 | 2022-10-11 15:50:16 | Wake Source | PME - XHCI (USB 2.0 port) | 257
```
BUG=b:186792595
TEST=Ran on skyrim proto, verified that wake events show in elog
Change-Id: I529f541a8932267a8825773ddc582beafb27da63
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68325
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set up SoC-specific XHCI defines and enable SOC_AMD_COMMON_BLOCK_XHCI.
BUG=b:186792595
TEST=builds
Change-Id: I16c789ff673c26ded84e4d46ab6dc743f33c5bb7
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67938
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The GPE number used for XHCI has now been defined in AMD's common code
in CB:67936. Change over existing code to use this new definition.
BUG=b:186792595
TEST=Ran on skyrim device and verified XHCI GPE setting.
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I3bfc2256ea2ca851afe88f2cdb419f39eee76fdd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69916
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
AMD SoCs currently only log the GPE# when an XHCI controller wakes the
system. Add code to log XHCI wake events to the elog.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Change-Id: Ic0489e1df55c4e63cb8a306099e3f31c82eebd58
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67936
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
- Remove functions that are only called in one place.
- Add warning if user doesn't supply a platform, since that can lead to
dumps/layouts that do not include all IFD regions without the user
even reliazing it.
- Inform the User if IFD or Flashmap is not found.
- Inform the User if there is not a single match between FMAP and IFD
region
- Avoid printing usage if not specifically asked by the user.
It tends to obfuscate the original error message.
- Keep indentation consistent throughout the file.
- Remove typedefs (coreboot coding style)
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I7bbce63ecb2e920530394766f58b5ea6f72852e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73448
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Winterhold boards populate either NVMe or eMMC, but not both.
This means that there is always one link that is unpopulated. The PCIe
configuration code takes longer to verify that a link is unpopulated
than to just train the link, so this slows down the boot by roughly
80ms vs the case when the device is present. Not training the device
at all lowers boot time by another 20ms, for a total of 100ms saved.
Looking at the NVMe CLKREQ signal before initializing the ports allows
us to identify which device is populated and only initialize that
device.
BUG=b:271569628
TEST=Boot Whiterun and eMMC or NVMe correctly work, boot time is lower.
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I0b87f5e968cd1c87e62a1c0fbdee1fc0723f655d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
These ports are not hot pluggable, so drop the parameter, which
will result it in being set to zero / not enabled.
BUG=none
TEST=build boot skyrim, verify all PCIe devices functional.
BRANCH=skyrim
Change-Id: Iaa55cc765e8f073b31f25771633789ac13e2fffa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73512
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Enable both L1.1 and L1.2 substates for the WiFi, SD card reader,
and SSD (both NVMe and eMMC). If a given device does not support
a particular substate, then it will not be enabled during PCIe
enumeration by coreboot.
BUG=b:270690572
TEST=build/boot multiple skyrim/whiterun/frostflow SKUs with different
storage configs, verify WiFi/SD card/SSD all functional and have L1
substates enabled insofar as they are supported by the device.
BRANCH=skyrim
Change-Id: Ib84df8b9d97282ae696414e52c4a65cfb0a81194
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
This allows variants to override the skyrim port descriptors.
BUG=None
TEST=Tested with following patches
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8cff44f5b39d130a7191a69970cae8a88bb5d475
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73294
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This fixes the case where a Broadwell CPU is combined with an AMD or
NVIDIA GPU would result in using the Broadwell GPU VBIOS file from CBFS
for the discrete GPU too. A further improvement would be to use a list
of the Intel iGPU PCI IDs like it is done in the Skylake code.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3eb50cb9a0539255d50e5cd8163f10c3a062cc4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73611
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Type 0x5d (MPIO Firmware) was mistakenly placed to PSP Level 1 directory.
It should be in Level 2 PSP directory instead.
Change-Id: Ic5ea00859f1055e0c91600c5f941c5d3acca36e2
Signed-off-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bao Zheng <fishbaozi@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch updates PMC API name from `pmc_send_pci_enum_done` to
`pmc_send_bios_reset_pci_enum_done` to inform PMC IPC about BIOS done
is also set along with PMC enumeration being done.
BUG=b:270942083
TEST=Able to build and boot google/rex.
Change-Id: I1cf8cb1ecadeb68c109be6b0e751a3f2c448ae4f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Hynix H54G46CYRBX267
Samsung K4U6E3S4AB-MGCL
BUG=b:272173189
TEST=run part_id_gen to generate SPD id
Change-Id: I141bda6eda3f658ca608c86ad0b320d018598514
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73554
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the inst field when adding entries to the psp tables. Otherwise,
entries that differ by the inst field will appear as duplicates with an
inst of 0.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I4a84a0730976f4c65902b5c24ed13e21e95b03bb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73522
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Decrease Touch i2c delay during power-on sequence from 300 ms to
150 ms to make S0ix resume time meet requirement.
BUG=b:264199989
TEST=Run the following test from chroot.
test_that -b {BOARD_NAME} {device IP} f:.*power_UiResume/control
Check seconds_system_resume value less than 500 msec
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ib81a9c1a90589b8b08e6ce6471db2abef96047ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73532
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the onboard Realtek NIC definition to a child device of
PCIe port 6. This makes sure it is advertised as "onboard", such that
it appears as eno0 on systemd/udev-based systems.
This commit is very similar to
https://review.coreboot.org/c/coreboot/+/73516
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I0550ee9faddd65011ad914aef413a6d1b316c5ad
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
The LOGICAL_CPUS Kconfig option is always true and also not user-
configurable, so it can be dropped.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie4866de003058ec0f99495b405e26dfd7ba1fa28
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Enable whiterun/winterhold platforms to send the fuse SPL (security
patch level) command to the PSP.
BUG=b:254568112
TEST=On a platform that supports SPL fusing, a message indicating
that fusing was requested will appear in the coreboot console log,
followed by a puff of smoke when the fuse is set and the message
"OK" again on the debug console. (Kidding about the smoke.)
BRANCH=skyrim
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I45578597234ba672c89ac421b4626088faca27d5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72914
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
This adds checks for three more error bits before requesting that the
SPL fuses are updated.
- While I'm here, I'm adding the include of types.h which was previously
done through other include files, but should be done independently.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I87a7d40850c4e9ddbb2d1913c1588a919fdb29d2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Use the presence of an SPL (Software Patch Level) file to trigger the
function that reads and writes the SPL fuses. The current Kconfig
option will be used to decide to write the fuses. This allows us to
see the state of the SPL update bit which determines whether or not
SPL fusing is allowed and needed before enabling the fusing.
- Refactor a bit to prepare for following changes.
- Update phrasing
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7bd2798b984673a4bd3c72f3cab52f1c9a786c67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73517
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Now that the code using the ACPI_SSDT_PSD_INDEPENDENT Kconfig symbol is
moved to soc/amd/common/block/acpi/cpu_power_state.c, also move the
Kconfig symbol to the Kconfig file in this directory.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ide18111df38d4e9c81f7d183f49107f382385d85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73550
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Introduce the get_cstate_io_base helper function that write_cstate_entry
can call directly to get the C state control IO base address instead of
having get_cstate_info pass this Io address to each write_cstate_entry
call.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I4cc80ded0a2fbc2dee9ca819e86284d9ffd58685
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The bit position of the P state enable bit in the 8 P state MSRs is
identical for all AMD chips including the family 16h model 30h APU that
lives outside of soc/amd. The other bits in those 8 MSRs are more or
less family- and model-specific.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia69c33e28e2a91ff9a9bfe95859c1fd454921b77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update header files for FSP for Meteor Lake platform to
version 3064_81, previous version being 2523_80..
FSPM:
1. Addition of new UPDs SocTraceHubMode,SocTraceHubMemReg0Size
SocTraceHubMemReg1Size.
2. Remove depricated UPD RDODTT.
3. Address offset changes.
FSPS:
1. Address offset changes.
FspUpd.h:
1.Corrected UPD signatures.
BUG=b:TBD
Signed-off-by: Kilari Raasi <kilari.raasi@intel.com>
Change-Id: I73764d471295ad1a969ae562fe8a9fb7a25c5b2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Touchscreen signals were renamed for Rex schematics dated 21st Dec'22.
This CL fixes the comments for those signals.
BUG=b:263411413
TEST=None required (changed comments only)
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Ic40ef943d199d9f4a2bec9c0e6d4820224ef6adc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The implementations of get_pstate_info of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. The SoC-specific get_pstate_core_freq and
get_pstate_core_power functions remain in the SoC-specific code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibe0494f1747f381a75b3dd71a8cc38fdc6dce042
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
With the exception of the generate_cppc_entries call, the
implementations of generate_cpu_entries of Picasso, Cezanne, Mendocino,
Phoenix and Glinda are identical, so factor it out and move it to the
common AMD SoC code. Since all SoCs that support CPPC already select the
SOC_AMD_COMMON_BLOCK_ACPI_CPPC Kconfig option, this can be used to only
call generate_cppc_entries for platforms where it is available.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I71323d9d071b6f9d82852479b60dc56c24f2b9ec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Split the big PSP FW data into two parts, head and body. The head
needs to be located at original specific location. The body address is
more flexible. So the big body will not cover other needed FWs like
EC.
Give the body a specific named AMDFWBODY, which should be defined in
flashmap.
This is one of series of patches to support 32/64M flash.
BUG=b:255374782
Change-Id: Ia8b318f71632a2c9b97ce67486374dc24d23e63e
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72703
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Instead of hoping that the default the C state control IO address in
binaryPI won't interfere with any other IO space usage in coreboot,
assign the ACPI_CSTATE_CONTROL value to the CStateIoBaseAddress platform
config structure element to make sure that binaryPI will use a known
address for the IO port based C state control. binaryPI will write this
address to the MSR_CSTATE_ADDRESS and will then also use these IO ports
in the _CST packages in the PSTATE SSDT, so changing this won't cause
a mismatch between those two.
The default CStateIoBaseAddress in the FT4 Stoneyridge binaryPI used on
Careena is 0x1770, so this didn't collide with any other IO space
registers, but it's still much better to tell binaryPI which exact IO
addresses to use.
TEST=On Careena MSR_CSTATE_ADDRESS now contains the ACPI_CSTATE_CONTROL
IO base address 0x420 and the PSTATE SSDT has the IO address 0x421 in
the _CST package entry for the second C state which are both the
expected values.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I207202802427d4bf00f283bcbd83a174ab0a2846
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
It is similar to PSP combo.
Change-Id: If0523a4a0e1f31969e4bbaa6062dcc0f2d6da420
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66856
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
If combo is used, fill the EFS header with address of COMBO header.
If not, fill with address of PSP header.
The old code fills with PSP headers all the time.
Change-Id: I0057165aea553d9dc8e4e719e2804557229a0002
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66855
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There will be a loop to set up the combo layout. The combo header only
needs to be created once. This change is actually to move the creation
of combo header outside of the loop.
Change-Id: If6ba3d10dfc598133b9adbbb2b6658f356455608
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66854
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is easier to understand what these statements are about.
Change-Id: Ib02c68c9f2ea84020b12682c41fb1a6f8f93d725
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66852
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Realtek RTL8111E NIC is currently not defined as a child device,
resulting in the on_board flag not being set to 1. This means that
Linux / udev will call the device enp3s0 rather than eno0, as is
appropriate for on-board ethernet devices.
Additionally, the comment in devicetree.cb stating that PCIe port 6
is the ethernet controller is incorrect. It's actually port 4.
This patch moves the comment to the right port, and defines the NIC
as a child device of said port, so that it's properly defined as an
on-board device.
Link: https://mail.coreboot.org/hyperkitty/list/coreboot@coreboot.org/thread/TFWNW3Y7IWTFD4KIBVNQYW3DODJ6SSC2/
Change-Id: Ie1e3a757a6bd6c7dd1702ced177d13711978dcc4
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73516
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
The actual values in cstate_cfg_table haven't been checked against the
reference code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5157fc031c5b19d8633132222520f582620208c9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Rework the way the C state info is generated before it gets passed to
acpigen_write_CST_package in generate_cpu_entries by separating the data
from the code. For this, the newly introduced common get_cstate_info
function is used. Separating the data from the code will eventually
allow moving generate_cpu_entries to the common AMD code.
The actual values in cstate_cfg_table haven't been checked against the
reference code yet.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4f5743dd2e4dfdfeb3ffb2e9b964bdc75c84e6c3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
