| Age | Commit message (Collapse) | Author |
|---|
|
This moves the multiboot header into its own include file, simplifying
head.S and making it easier to include/exclude the multiboot header
based on config options.
BUG=b:242829490
TEST=Able to build and boot google/rex.
Change-Id: I59a22dfe36044b4dd64a5b028a134be7a7d02a48
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82533
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch tries to simplify the baseboard/variant GPIO programming
for Google/Trulo. The idea is to let each variant maintain
its own complete GPIO PAD configuration table instead of having a
back-and-forth call between baseboard and variants.
With this patch coreboot performing GPIO programming is now much
simpler where the common code block calls into respective variants
and gets the gpio table prior to the pad configuration.
BUG=b:334826281 ([TWL] Decouple GPIO from baseboard to variant)
TEST=Able to build google/orisa.
Change-Id: I4ab88ac094a45c608cd894feb5eeec24b867527a
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82629
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
* Introduce a null check before calling `gpio_padbased_override`
in `variant_configure_pads`.
* This prevents potential errors in cases where the
`variant_gpio_override_table` function returns a null pointer,
indicating that there are no override pads to configure.
BUG=b:334826281
TEST=Able to avoid hang incase there is no GPIO override.
Change-Id: I733210a08091b37eda6e6b0d6924aafd5e7e6280
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82628
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CHECK_REV_IN_OPROM_NAME Kconfig option was introduced to solve the
problem of the PCI VID/DID combination of the Picasso iGPU not being
sufficient information to know which VGA BIOS file to run, so a new
function that additionally checks the PCI revision of that device was
introduced. Later it turned out that there might be a case where even
that isn't sufficient, so the soc_is_raven2() function is used in the
remap function to always use the correct VBIOS file.
Picasso is the only SoC that selected the CHECK_REV_IN_OPROM_NAME
Kconfig option, so all other SoCs are unaffected by this change.
Now that we use the VBIOS images with only the PCI VID and DID in the
CBFS file name for Picasso, SeaBIOS will find the VBIOS with the same ID
as the iGPU in CBFS and we don't need the workaround to add a third
VBIOS image via VGA_BIOS_DGPU_* that has the name that SeaBIOS expects.
This will result in SeaBIOS now running the VBIOS that has the same PCI
VID/DID as the hardware which will be the wrong one in the RV2 silicon
showing the PCO silicon PCI VID/DID, but that was also the case with the
VGA_BIOS_DGPU_* workaround where the board's Kconfig just selected one
of the two possible images during build time and hoped that it was the
correct one for that actual hardware. The only board where this patch
might cause a regression compared to the old behavior is the AMD Cereme
reference board with Pollock APU, but I'm not even sure if any coreboot
developer still has one of those boards, so I'm willing to accept that.
To properly solve the problem with SeaBIOS using the correct VBIOS file
in all cases, we'd need to generate that info during coreboot runtime
and somehow pass it to SeaBIOS, but that's out of scope for this patch.
TEST=On Mandolin with PCO silicon, the display output in both SeaBIOS
and Ubuntu still works. Booting Windows 10 via the pre-built EDK2
payload that I'm using also resulted in the display output working.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia6de533c536044698d85404427719b8f534870fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82598
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8d4500edaa0739921831a3b04131046599c35a87
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
The Type-C kernel driver no longer programs the AP mux, as of
https://review.coreboot.org/c/coreboot/+/82077. So remove device
references to the TCSS Mux control device from the Type-C port driver.
This eliminates the following kernel error which was observed as a
result of the kernel trying to program muxes it no longer has control
over:
[ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95
[ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95
BUG=b:341331428
TEST=Run system reboot; configure mux kernel errors no longer seen.
Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b
Signed-off-by: Prashant Malani <pmalani@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5208ceeec17051e7849263a4caa0838efd59c044
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82608
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaf4478814e672fb8cfae5ffc4fa89c475f5bb0b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82607
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iba17d44772333ed59e3fdde1443a1862bae8e32f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82606
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
1) Add all changes needed for early graphics
2) select MAINBOARD_USE_EARLY_LIBGFXINIT for nissa
The InnoLux (N156HCN-EBA C7) panel is used for the device tree.
BUG=b:296433986
TEST=On-screen text message seen during MRC training on Craask
Logs:
[NOTE ] MRC: no data in 'RW_MRC_CACHE'
[SPEW ] bootmode is set to: 0
[0.171409] DP PHY mode status not complete
[0.175509] DP PHY mode status not complete
[0.179799] DP PHY mode status not complete
[0.184087] DP PHY mode status not complete
[0.188376] DP PHY mode status not complete
[0.192665] DP PHY mode status not complete
[0.196954] DP PHY mode status not complete
[0.201243] DP PHY mode status not complete
[0.205532] DP PHY mode status not complete
[0.209821] DP PHY mode status not complete
[0.214110] DP PHY mode status not complete
[0.218397] DP PHY mode status not complete
[INFO ] Informing user on-display of memory training.
Change-Id: I33cfc5d1f8c25c344e598befd21c50a78a65275a
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78932
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board is the CWWK variant based upon Alder Lake with 4 2.5 GbE
ports, similar boards are available in other port configurations. As a
low cost, relatively high performance board with 4 NICs, it is well
suited for networking or 'homelab' tasks.
CPU: Intel N100 or N350
Memory: DDR5-4800 SODIMM (max 16 GB)
NIC: 4x Intel I226-V 2.5 GbE
Expansion:
- M.2 2230 E key
- M.2 2280 M key
- USB 2.0 header
- Fan header
External ports:
- DC power
- 4x Ethernet
- Display Port
- HDMI
- 4x USB 2.0
- Micro SD
Working:
- Boots Debian 12 with SeaBIOS and EDK II payloads
- Serial port
- External USB ports
- DisplayPort / HDMI
- 4x Intel I226 2.5 GbE NICs
- M.2 ports
- Micro SD slot
- ACPI S3
Not working / not tested:
- Fan (ITE IT8613E)
- Audio
- S0ix
- Internal USB ports
VBT extracted from vendor UEFI firmware version ADLN 0.01 x64
(04/04/2023 11:42:38).
Change-Id: Ice9174d95c10afc6a22ddd15fb3be4fa38d329be
Signed-off-by: Brandon Weeks <me@brandonweeks.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81595
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Ivy Bridge has lower latencies than Sandy Bridge has. Update MSRs
MSR_PKGC_IRTL with values from BWG.
Test: Lenovo X220 still boots.
Change-Id: Ib307e3b191ba68e016cc348f82e2dccf1dc9ae16
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/78609
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Some proximity domain info are type specifics, e.g. base/size/dev
are effective for PD_TYPE_GENERIC_INITIATOR, but not for
PD_TYPE_PROCESSOR. Dump info per their type.
TEST=Build and boot on intel/archercity
Change-Id: I7e722a0577bba954efba3e91cc152c758c001d68
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82292
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Move proximity domain setting up to ahead of attach_iio_stacks()
so that proximity domain info could be ready before
attach_iio_stacks()/create_xeonsp_domains().
For example in SPR, is_iio_cxl_stack_res() refers to proximity
domain info, and it will be called in create_xeonsp_domains().
TEST=Build and boot on intel/archercity
No significant boot log difference except for proximity domain
dump info display are moved ahead (with correct contents).
Change-Id: I594f0ec0c23e3b62c3bdd917ebf6e45be6e4069e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82267
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Micron part MT62F512M32D2DR-031 WT:B only for Orisa.
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
BUG=b:337178014
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: I559ed817250c40795e6c613794d4f65c636f5fc5
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82586
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 7088257b1ab715e93506619727e3bf589ea688fb.
Reason for revert: Intel suggest is NC only.
No need to change anything that isn't broken.
Change-Id: I976a85b35c69b03f1bc0ccd2bc7df923e47be815
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82572
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the `AZALIA_PIN_CFG_NC(0)` macro instead of `0x411111f0` and tidy up
some comments (align them and be consistent with capitalisation).
Tested with BUILD_TIMELESS=1, prodrive/hermes remains identical.
Change-Id: I1ff1197b1309fc0e5b978d6d36867a3f1a68c67c
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82396
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Now that we also have the devicetree registers for the USB PHY config
in the openSIL case, add the USB PHY config setting from the Phoenix
with FSP devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3a0acbf1b9d705dbf09f4480eb35e71e587ddd44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add the USB PHY configuration structs for the openSIL case, so that
those can be configured in the devicetree like in the FSP case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ied25e90859c4b1bc9b876bed3f3c46358ca36d32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82584
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the now common get_ddi1_type function to update the connector type
of the DDI1 port to match the display output extension card plugged into
the reference board.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7c51eab0d32e0a1708da415f690689a8ec38dcd3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82583
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Both port descriptor files used in the FSP case contain an identical
get_ddi1_type implementation, so factor it out into a separate file.
This will also allow using the same function in the openSIL case in a
following patch.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6f5b75b9bdbdc67901d157079785c8fa2915bf0c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82582
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a static DDI port configuration to the devicetree used in the
Phoenix with openSIL case. The configuration is taken from the
birman_ddi_descriptors array in port_descriptor_phoenix.c.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b85b04114591f3e9da183019c98ca2cb08e59da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82581
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the FSP case, the DDI descriptors aren't part of the devicetree and
are instead retrieved in romstage by calling the mainboard's
mainboard_get_dxio_ddi_descriptors function which allows updating the
descriptors during romstage where the devicetree is static. In the
openSIL case, the DDI configuration is first needed in ramstage, so we
can put this info into the devicetree and update it if needed in
ramstage.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3de12ff6af42e38751a3016efa313613677fa87a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82580
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Remove the unexpected '<' char at the end of the comment about the PSPP
policy config.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id821351ce3a7a2b7844d8e7478fa3de3227a7da9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82579
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Remove the TODO to update the chipset devicetree for Phoenix, since this
has already been done.
When re-checking the chipset devicetree, I found conflicting information
about the existence of the PCI bridge to an external PCIe port on bus 0
device 1 function 5, but after looking into this, I'm reasonably certain
that it either doesn't exist or at least wouldn't be usable, so I won't
add that one to the chipset devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f0e1540ed45408e86186253d3982a7ba0065ac6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Guard OCP functions calls to allow builds without OCP drivers.
Change-Id: Ie9a82387366a8bb3387bcba3ec7a4c7f0100f78c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82168
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Update Makefile to include fw_config file for mtlrvp board.
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Id41cd8b015a796f7a959ceccf85106a48d15ae35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82559
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd.
The new verb table breaks external mic detection on brox.
Revert and use old verb tables instead.
BUG=b:330433089
BRANCH=main
TEST=Verified headset on Brox
When connected to audiojack in power_save state of legacy hda driver,
headset is detected and audio is resumed.
Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106
Signed-off-by: Terry Cheong <htcheong@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nova will use SOLDERDOWN. Add memory.c to override baseboard.
Update dram id table for correct platform parameter.
BUG=b:328711879
Change-Id: I6fbce991ef5ab9f0e6216ad1a5af73fcc1996a2a
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82474
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On GreenbayPOC, HDA Codec used is ALC236, different with Brox (ALC256)
Update to Realtek provided verb table for ALC236 audio codec.
BUG=b:336967284
TEST=Verified headset and audio workable on DUT with "rec" and
"aplay" command.
Change-Id: I9fbe57a0acab20387754f6b6cb5705e34c1c149b
Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82413
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds some helper functions for FDT, since more and more mainboards
seem to need FDT nowadays. For example our QEMU boards need it in order
to know how much RAM is available. Also all RISC-V boards in our tree
need FDT.
This also adds some tests in order to test said functions.
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I2fb1d93c5b3e1cb2f7d9584db52bbce3767b63d8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81081
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I5c22913b35848c5ea32d6805ea081abefd3380bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82237
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
psys_pl2_watts is configured in SoC node of devicetree.
Value represents Watts.
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST=emerge-ovis coreboot
Change-Id: I9c4d62b93fc751db9e0ea04e475acb8861a844f8
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add devicetree settings per the schematic.
Differences to gladios:
1. remove SD reader
2. remove EMMC setting
3. modify USB port distribution
FRONT
-------------------------------------------------------
| A3 A1 |
| C0 A2 A0 |
-------------------------------------------------------
BACK
-------------------------------------------------------
| --------------- |
| | TX25A | |
-------------------------------------------------------
BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: Ia010e99c21e8d6088f6bb873f79dc19cadc9e455
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81447
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: Ie087f43e6f60df7b97d7d7b402d3540c3a0a2461
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82552
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Debian sid is too unstable at this point, and frequently ends up having
issues that cause the coreboot-sdk docker image to fail to build. Using
stable also better reflects what users will typically be running.
Also remove the parameters to quiet the apt-get install command so that
if something does break, we can see what happened more easily.
Fixes bug 536
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I41b6464b024df89c114db2cdb9367c0526eb0297
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82411
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the submodule pointer to current main. This brings in 5 commits:
* e096913 connector_info: Fix HDMI/DVI default bytes per color setting
* 87469f2 gma config: Add new device IDs for Raptor Lake
* 4be2e75 gma: Update transcoder setup for TGL
* 4b991bf gfxtest: Drop unnecessary with of ancestor
* 17cfc92 tgl plls: Disable warnings about unused variable
Change-Id: Ic40edc773ba11ab9a0f9e92057bd687d10b95069
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82554
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Refactor the `get_port_b_vref_cfg()` function to only return the
variable bits of the value. The NID itself is not connected, and
the `misc` field in the verb conveys the Vref value.
Change-Id: I5108f5339c5b002403a4e5339da6d52046c8bcbe
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82395
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit renames the variable _ARCH to _ARCHDIR in the libpayload
build script (lpgcc) to align with the naming convention of other
variables used in this file.
This change improves code readability and maintainability.
Change-Id: Iea4af68e49ab1cd7ec8156a14f8215244e9c0622
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82479
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Probe C1 port in devicetree and disable un-used C1/A1 port by FW_CONFG.
BUG=b:339534479
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot chromeos-bootimage
flash and check boot log on DUT.
Change-Id: I944ff6f2fa712e7579ed1c9879f75835adc3ac4c
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Remove unused setting for retimer.
BUG=b:328711879
Change-Id: I48d8680d43a07aa3408dfbf5b25b568c2b51b343
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82475
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The cr50.c file currently prints "cr50" in debug messages no
matter the system is using Cr50 or Ti50. This can be confusing
for developers.
This patch replaces "cr50" with "GSC" in debug messages. Using
"GSC" makes the messages more clear and easier to search via
`grep`.
BUG=none
TEST=Build and test on karis
Change-Id: I21f66cf8b608ca4e4dc82d7a55a851ec996c8bb3
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82420
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Beechnut City CRB is the 2 socket reference board for 6th Gen Xeon-SP
SP SoCs (Granite Rapids SP and Sierra Forest SP).
This patch initially sets the code set up as a compilation target with
GNR N-1 FSP, and with basic feature supports (Integrated IO Controller
(IIO) configuration, BMC, UART, HPET).
TEST=Build on intel/beechnutcity CRB
Change-Id: I3f6a0fb97b62baadb438fb9f11fdd78fccb3f89a
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81322
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Avenue City CRB is the 2 socket reference board for 6th Gen Xeon-SP
AP SoCs (Granite Rapids AP and Sierra Forest AP).
This patch initially sets the code set up as a compilation target
with GNR N-1 FSP, and with basic feature supports (Integrated IO
Controller (IIO) configuration, BMC, UART, HPET).
TEST=Build on intel/avenuecity CRB
Change-Id: I64fdd5388aadf7732f6d3daa600c1455d3672a46
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add IIO configuration utils shared in GNR boards to handle the
complex IIO configuration settings.
Change-Id: If7146761db6f73a0c4b0d31b010c0d30a42bf690
Signed-off-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When support for the dictation key was added in commit f2782b8328d5
(acpigen_ps2_keybd: Add support for dictation key), I had failed to
include this portion of the change in that commit. The top row key of
`TK_DICTATE` needs to be converted to the ps2_action_key. This commit
simply adds that mapping so that it can be translated.
BUG=b:333101631
TEST=Flash DUT that emits a scancode for a dictation key, verify that it
is mapped to KEY_DICTATE in the Linux kernel using `evtest`.
Change-Id: I1be8c0a96931cca36e6bbbfa0be7d36c4cd93768
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82274
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of including stub/mpio/chip.h, include chip/mpio/chip.h that
will include the correct implementation to be able to use the same file
with both the openSIL stub and the actual openSIL implementation glue
code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iaae26a0dfe0ba96842e72582c06f1b0b3f29871c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82472
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes VPU enablement code that is no longer needed because
the VPU is already enabled by default in the baseboard devicetree.
BUG=b:332488817
TEST=Able to see VPU PCI device in lspci list after booting
google/screebo to OS
Change-Id: I94de92e970be1548068ed4e19309a95129f041ff
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82423
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch enables the Versatile Processing Unit (VPU) by default for
Rex/Ovis baseboard. VPU is a dedicated AI engine that is included in
the 14th generation "Meteor Lake" Core processors.
The VPU is designed to efficiently run AI models directly on the
system on chip (SoC). There is no power regression observed while
keeping the VPU default enabled to run AI models natively hence, this
patch enables the VPU by default.
BUG=b:332488817
TEST=Able to see VPU PCI device in lspci (0:11:0) list after booting
google/screebo to OS.
Change-Id: I8b3521c8ec613b002f971eaf9d346927fe8cd656
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Set lowercase hex format for IGD DIDs.
BUG=b:326901448
TEST=Build tivviks and verify the IGD IDs.
Change-Id: I1299512d1c48eba854fea2ec394cef40d44a87d7
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82414
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
There is no direct way to override CPU default power_limits for
different SKUs.
This CL add structure variant_get_soc_power_limit_config() for
variants to define and configure the values of soc_power_limits_config
for current CPU SKU.
Variants can override these values i.e. pl1, pl2, psyspl2
in variant_devtree_update().
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST=FSP debug emerge-ovis coreboot intelfsp
check overrides setting
Change-Id: Ib60fa4e3fc502d0aeb0c94ad46ba5a55b4dd027c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82199
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematic to update the gpio table.
BUG=b:327549688
TEST= USE="-project_all project_bujia" emerge-brask coreboot
Change-Id: I3d01e3b9eaef72d9e143f5163ee49d8c8f455b5f
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82412
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function had roughly the same use (except PAT) as part of
memset_pae(), however the latter is able to make use of PAE and map
physical memory located above 4 GB. Remove paging_identity_map_addr()
to avoid semi-duplicated code.
The function has been unused since CB:26745.
Change-Id: I7a4ebd84a6f5d222c3b2c6c6e3d26d6464cf01b8
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82248
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Report upgraded version for ACPICA, CMake, nasm, LLVM and GCC.
Change-Id: I93a9ae4a2f4c3403a6e8c9a8b7aca74b996e7db8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82410
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Upstream commit 11ad164bce (UefiPayloadPkg: Make UPL build script arch
agnostic, 2024-02-22) changes the build script's behavior to not assume
the arch. Without defining BUILD_ARCH, the build script will not
function properly and results in the payload failing to build.
Both UefiPayload and Universal Payload can only be built in X64.
Change-Id: Icd942d0c15a99231d09f9cbdc5eb48333b6aa6e5
Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
In preparation for the upcoming release, add the template for the
24.05 release and update index.md.
Change-Id: I733f541a2d6e556c82aff1656fe7f79ae3673ba7
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82400
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Phoenix 2 has less PCIe lanes than Phoenix, so some of the lane end
numbers need to be adjusted to take that into account. When the Kconfig
options WLAN01 or WWAN01 are set, either the WLAN or the WWAN card uses
both PICe lanes that are available for those two devices, so the MPIO
descriptor information the devicetree needs to be updated accordingly
and the bridge to the PCIe port that doesn't have any lane left needs to
be disabled. Two other PCIe devices will be disabled when the
corresponding Kconfig options ENABLE_EVAL_CARD and DISABLE_DT_M2 have
the value that results in the device being disabled via some GPIO driven
by the EC. Since the code is specific to the openSIL case, only include
it in the build in the CONFIG_BOARD_AMD_BIRMAN_PHOENIX_OPENSIL case.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23c14cc03980ea1e39f7e5aec551b975c237e487
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Add the stub MPIO chips that contain the PCIe engine configuration for
the external PCIe interfaces to the devicetree. Birman's
port_descriptors_phoenix.c was used as a reference. The static
configuration in the devicetree assumes that the default WLAN0_WWAN0 is
selected; for the other cases we'll still need to fix up things
accordingly in the mutable devicetree. The WLAN01 and WWAN01 cases still
need to be handled in a follow-up patch. Since openSIL currently doesn't
use the info from the gpio_group struct element, but deasserts both PCIe
reset pins GPIO 26 and 27, the gpio_group isn't specified in the chip
configuration in the devicetree.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Icabe60322d46c1195284dd77ec39f9d143e3d2cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81101
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Create the orisa variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.)
BUG=b:337178014
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_ORISA
Change-Id: I0cd8d763ffd8864b455a7f8909e95f6aee8bb23e
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82241
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: Idf5912d1fcdfabab7fe006b7e0cd4ebd25c07d09
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81683
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I03a44e0c23a925396f614f282882405dc886ba58
Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com>
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80314
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Remove the patch since it was picked from master before and thus it's
included in the new release.
Change-Id: I70408b189b974f8abaadc66f0c809a1dbe10504b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81900
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I41f56ba58af51b1ec1d7554fb35a49ccf9e778f6
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Iaf2d4f579d987fbfd4187ae41c1be5cec55e0e8e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
These are the final release notes for the 24.05 release before the tree
is marked with a tag, completing the release. We will update the notes
with final numbers and anything else after the release is tagged.
The 24.05 release will be announced a week later, barring any issues
that require an updated release tag.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I00be0127351f8641116b4bc523c266628b084e69
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82407
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
coreboot GNR (Granite Rapids) is a FSP 2.4 based, no-PCH, single
IO-APIC Xeon-SP platform. The same set of codes is also used
for SRF (Sierra Forest) SoC.
This patch initially sets the code set up as a build target with
Granite Rapids N-1 FSP (src/vc/intel/fsp/fsp2_0/graniterapids).
1. All register definitions are forked from SPR (Sapphire Rapids)
and EBG (Emmitsburg PCH)'s codes are reused.
2. src/soc/intel/xeon_sp/chip_gen6.c is newly added as chip
common codes for 6th Gen Xeon-SP SoC (Granite Rapids) and later.
Change-Id: I3084e1b5abf25d8d9504bebeaed2a15b916ed56b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Co-authored-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81316
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Auto-generated by util/vboot_list/vboot_list.sh.
Change-Id: I5e1a7046b03687d15e8ceae2074ec25aa72a6f28
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82399
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: coreboot org <coreboot.org@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Add PCI ID for RPL tracehub and update the PCI ID in the
pci_device_ids[] in tracehub.c.
Reference:
Raptor Lake External Design Specification Volume 1 (640555)
BUG=None
TEST=Verified on brox
Change-Id: I5d5c6c8ff44bcb5a7bbbd3e27a1577c169ecd6a9
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Yes, the DSDT revision is the OEM revision. But most certainly not that
of the board being ported. Because no one seems to care about the value
(newer boards inexplicably use lower values even though this represents
a date in 0xYYYYMMDD format), simply drop the incorrect comment. Should
save a bit of effort when reviewing mainboard ports: no longer will one
have to ask authors to drop the comment.
Change-Id: I9c425573e4fcb0f670a780e7821e815eadc8a2aa
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82401
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The README suggests using `logs` as the folder name where autoport puts
the generated logs. Thus, add this folder to .gitignore for the sake of
convenience. Yes, people can use other folder names, but `logs` is most
commonly used.
Change-Id: I37906b43ba3e132de616184e4a5082ce00f4b230
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82398
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Reference:
Panther Lake External Design Specification Volume 0.51 (815002)
BUG=b:329787286
TEST=verified on Panther Lake Simics Platform.
Change-Id: I941d6e1c8a697234b8e64a2523e60587897d7f7a
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81848
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Panther Lake specific CPU and PCIE device IDs
Reference:
Panther Lake External Design Specification Volume 0.51 (815002)
BUG=b:329787286
TEST=verified on Panther Lake Simics Platform.
Change-Id: I82f47b6077e28a01f34c59b7e7697323b3d5f990
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81849
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
BUG=b:329787286
TEST=verified on Lunar Lake RVP board (lnlrvp).
Change-Id: I92b65c946682387cbb841d558c6f0a7cb0fcd4ac
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81850
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Iccmax of VccIn_Aux is 25A with MBVR design.
BUG=b:330117043
BRANCH=firmware-nissa-15217.B
TEST=Local build successfully and boot to OOBE normally.
Change-Id: I105dc9df53c624fd7fc697408a1097e023a3cd68
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81445
Reviewed-by: Simon Yang <simon1.yang@intel.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add stop pin control for G2 touchscreen refer to
G7500_Datasheet_Ver.1.2.
BUG=b:335803573
TEST=build and verified touchscreen works normally
Change-Id: I4f085c67c0cdb8b9ca3ff03993fda69cca6319ef
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82254
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Copy the data.vbt from brox to greenbayupoc
BUG=b:326413034
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT
Change-Id: I1e8101519ab2ecbb4654c20485fbe83c90656e4d
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82108
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Based on latest schematics GREENBAY_0412.SCH update the gpio and
devicetree settings.
BUG=b:326413034
TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT
Cq-Depend:chrome-internal:7218819
Change-Id: I59f25b8abb7dd8a2dff7ff567b231bddc9db8455
Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This patch removes all instances of the `protected_mode_jump` API and
its associated header file.
The API is no longer used by any code within the tree.
BUG=b:332759882
TEST=Built and booted 64-bit coreboot with 32-bit payload successfully.
Change-Id: I3eb31b09c92512338ccc540f60289960bd6bf439
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82372
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The payload execution process has been updated to utilize
protected_mode_call_1arg in order to guarantee proper handling of
function parameters.
The previous use of protected_mode_jump with a "jmp" instruction did
not allow for proper stack setup for argument passing, as the calling
convention was not aligned with the System V ABI calling convention.
This patch ensures that calling into the libpayload entry point using
protected mode is now aligned with the System V ABI calling convention.
This resolves an issue where retrieving the "pointer to coreboot tables"
from within the libpayload entry point was failing due to incorrect
argument passing.
BUG=b:332759882
TEST=Built and booted 64-bit coreboot with 32-bit payload successfully.
Change-Id: Ibd522544ad1e9deed6a11015b0c0e95265bda8eb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82294
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Currently the Focal touchpad does not work. Based on the Focal touchpad vendor, upadet the HID descriptor address from 0x20 to 0x01.
BUG=b:339756281
TEST=Build and check Focal touchpad can work.
Change-Id: I383ad907e6a23c34ab1bd0f6594a87564e21181d
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82270
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Support Memory of Micron MT53E512M32D1NP-046 WT:B and Hynix
H54G46CYRBX267 in mem_parts_used list, and generate SPD ID for these
parts.
DRAM Part Name ID to assign
MT53E512M32D1NP-046 WT:B 0 (0000)
H54G46CYRBX267 0 (0000)
BUG=b:337173071
BRANCH=firmware-dedede-13606.B
TEST=Run command "go run \
./util/spd_tools/src/part_id_gen/part_id_gen.go \
JSL lp4x src/mainboard/google/dedede/variants/pirika/memory/ \
src/mainboard/google/dedede/variants/pirika/memory/\
mem_parts_used.txt"
Change-Id: I9b1a2a622d0ca1298671b1da58beacc1b4244769
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82094
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I136905d60de14749cfa325b24de3df204f0135ec
Signed-off-by: Lennart Eichhorn <lennart@zebre.us>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82116
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a nvram option for front audio panel type.
If it is set to AC97, reprogram front line out and microphone
pins to match vendor firmware under same configuration.
TEST=On asus/p8z77-m housed in an AOpen H340D case with an AC97
front audio panel, front panel line out port is now available as
headphone port in Fedora 39 with this patch applied and option
set correctly. And it works. Without the patch (or with this option
set to HD Audio), front audio ports are completely inoperable.
Change-Id: I39ccf066d87c5744a697599861719182768e0728
Signed-off-by: Keith Hui <buurin@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Change-Id: I353ceb7ab5ec0c82f5e717c856ad7934fcbd03b6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82355
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I3aa669042908b92d7b270df077a352e197071780
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82354
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib86df42c74474ab6d0bd389073c36ca0761748af
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Change-Id: I2d73f7815e83e8bf0c6d0a402d32bc99c32c7d90
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82243
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I48b833a3727d4b7d7c50371dbe8f090983d80e36
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Pad names now matching soc/intel/xeon_sp/ebg/soc_gpio.c.
Test: Generated pad names for ASRock Rack SPC741D8 now compile.
Change-Id: Ied53b654f905add86a05bce8c2e366dea9ccf4d3
Signed-off-by: Fabian Meyer <fabian.meyer@student.kit.edu>
Co-authored-by: Yussuf Khalil <yussuf.khalil@kit.edu>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82205
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds a comment for unused AMD_FWM_POSITION_20000_DEFAULT.
Change-Id: Id8369f488893e7e5b2e7e7126d1b53199ed1aa77
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add data.vbt file for riven recovery image. Select INTEL_GMA_HAVE_VBT
for riven as it has a VBT file now.
The VBT file is copied from the nivviks reference board.
BUG=b:337169542
TEST=build pass
Change-Id: I499c1b3e61581483a1640375270f7707ebe8deeb
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82269
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This function isn't used anywhere. It probably wouldn't work with
current coreboot anyway, as it identity mapped lower 2GB of RAM, while
ramstage is run from CBMEM, which is usually just below top of memory.
It was last used in K8 code that is long gone.
Change-Id: I97e2830f381181d7f21ab5f6d4c544066c15b08c
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
Disable c1 state auto-demotion support for brox
BUG=None
BRANCH=None
TEST=Boot brox and verify in fsp debug logs
Change-Id: I18d40cd721d46fce4702cf1a943583cd41c03cf4
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82104
Reviewed-by: Shelley Chen <shchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Details:
- Add support for new Lunar Lake MCH ID 0x6410
- Add new CPU id 0xb06d1
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
TEST=Build, boot the system and verfiy MCH-ID prints in bootblock stage.
Below prints verified on Lunar Lake RVP board (lnlrvp).
[DEBUG] MCH: device id 6410 (rev 02) is LunarLake M
Change-Id: I976d7f269485633d835d204afa224736d71baaa8
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81847
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Without this patch, ACPI SSDT does not supports and lists CNVW.
With this patch, verified "CNVW" in ACPI SSDT listing.
Scope (\_SB.PCI0)
{
Device (CNVW)
{
Name (_ADR, 0x0000000000140003) // _ADR: Address
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
}
}
Reference:
Lunar Lake External Design Specification Volume 1 (734362)
BUG=b:329787286
TEST=verified on Lunar Lake RVP board (lnlrvp).
Change-Id: I5a0a3fbc9f43a6a573e33fcf3901055e10faaed1
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81846
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Previous CL misspelling VR domain to IA not GT which cause
FVM Itrip(GT) not set correctly.
This CL corrects it to VR_DOMIAN_GT and confirm FVM Itrip(GT)
has set to 54.
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST= FSP debug emerge-ovis coreboot intel-mtlfsp
check overrides setting
IccLimit[1] = 216 ( 1/4 A)
Change-Id: I99df053869aa11b7c82aa0b7f7ec0acf73467a76
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82268
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
The chip drivers in the devicetree use the path where the corresponding
chip.h file resides both to include this chip.h file in the static.c
generated by util/sconfig from the devicetree and also for the names of
the chip config and chip ops struct. To be able to build a SoC using
either the MPIO chip driver from the openSIL stub or from the actual
openSIL glue code without needing different devicetree files for the
different cases, introduce a common MPIO chip.h file that then includes
the correct MPIO header file. The chip config and ops structures also
need to be renamed to take this change into account.
Thanks to Matt for pointing out how to make the path to the actual MPIO
chip.h file configurable via a Kconfig setting. This allows overriding
this path from site-local without the need to have any reference to
site-local in the upstream code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Iead97d1727569ec0d23a2b9c4fd96daff4bebcf6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82262
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Idef3b661b1cf3008373e61e0760a7dd3b9e9fede
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82261
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enables parsing Meteor Lake inteltool output into gpio.h pad macros.
Change-Id: Iaebd51d587507e68c6f263b92dc61cb6c0411bf8
Signed-off-by: Filip Lewiński <filip.lewinski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81916
Reviewed-by: Maxim <max.senia.poliak@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
Also switch configs to use combo v1/v2 FSP
The reason for this change is to simplify configuration - instead of
multiple targets for VP4630 and VP4650 or VP4670, it's now possible to
have one target covering all VP46x0.
Change-Id: I1a6f6e873e4ec35b9777dc17c0495151348d1d88
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81963
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
