summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-02-01mb/google/dedede/var/galtic: Decrease core display clock to 172.8 MHzFrankChu
Galtic has a rare stability issue. The symptom is display black screen while switching to secure mode, normally it will occurred at the last step of factory side and it'll follow by some specific SOCs. Slowing the initial core display clock frequency down to 172.8 MHz as per Intel recommend for short term solution for Gal series. The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0 (172.8 MHz) for Galtic. BUG=b:206557434 BRANCH=dedede TEST=Build firmware and verify on fail DUTs. Check the DUTs can boot up in secure mode well. Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ic059ab306f80a6d01f4b0a380a3b767d3245478d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61103 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-01soc/intel/alderlake: Add PMC register base for ADL-NUsha P
Add PCR_PSF3_TO_SHDW_PMC_REG_BASE for Alderlake-N.This value is updated from the FSP code. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I7c788e149744bfae2c5260c996b16fc1ce2070c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61148 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-02-01soc/intel/alderlake: Select SOC_INTEL_COMMON_BLOCK_SCS for Alder Lake NKrishna Prasad Bhat
Alder Lake N has eMMC storage device. Select SOC_INTEL_COMMON_BLOCK_SCS Kconfig for Alder Lake N. Change-Id: I577ffdc80ef09471309c827551a347d4397a33d1 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61128 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-02-01soc/intel/alderlake: Add eMMC PCR Port ID for Alder Lake NKrishna Prasad Bhat
Alder Lake N has eMMC storage device. Add PCR Port ID for it. Reference: Alder Lake N platform EDS Doc# 645548. Change-Id: I6dc494d1748e66b8b4058954f127ec226863e8af Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61126 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-02-01soc/intel/alderlake: Add GPP_I GPIO group for Alder Lake N SOCKrishna Prasad Bhat
Add definitions for GPP_I GPIO group pins on Alder Lake N SOC and GPIO IRQ routing information. GPP_I GPIO group belongs to GPIO community 1. Hence GPIO community 1 in Alder Lake N contains GPP_S, GPP_I, GPP_H, GPP_D GPIO groups. GPIO groups 1-6 in Doc# 645550 Chapter 36 corresponds to GPIO communities 5-0 respectively. BUG=b:213535859 Change-Id: Ia71a399c03cb7d098a381bd9439d448e8a620761 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61106 Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-31util/lint/checkpatch.pl: Use "gitroot"Elyes HAOUAS
This is to reduce difference with linux v5.16. Change-Id: I3bdf880c8b6068467665865b7cf1249d1047e833 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61470 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-31util/lint/checkpatch: Update "check for missing blank lines after declarations"Elyes HAOUAS
This is to reduce difference with linux v5.16. Change-Id: I1b7bc2b4ec832f0abeda215c381856a5ec153883 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-31util/lint/checkpatch.pl: Update 'commit message line length limit'Elyes HAOUAS
Also add "coreboot" comment on our modification. Change-Id: Ida58a92457e25bac7fb89bb5882e7647f388ec01 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61468 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-31util/lint/checkpatch.pl: Remove unneeded whitespaces and fix some typosElyes HAOUAS
This is to reduce difference with linux v5.16. Change-Id: I4aa7abce83b41ccd5129717cd3bf85be19ec4807 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-31util/lint/checkpatch.pl: Use "perl_version_ok"Elyes HAOUAS
Also use '$minimum_perl_version'. This is to reduce difference with linux v5.16. Change-Id: I7c2f5d5c9853dc8ddc8f89a5e2edd6c8613ba790 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61466 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-31util/lint/checkpatch.pl: Use "tabsize"Elyes HAOUAS
This is to reduce difference with linux v5.16. Change-Id: Ifeb9c4406737fa24f9bd803af48d8b8d17654940 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-31nb/intel/gm45/raminit.c: Fix indent for 'if' statementElyes HAOUAS
Change-Id: I316ae56321da1183caefeac3163b8909d1a554b1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61474 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-31superio/smsc/lpc47n207/early_serial.c: Fix indent for 'if' statementElyes HAOUAS
Change-Id: I0342e25747458239c1ad8c0f70f91f700ae8325d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61473 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-31sb/intel/i82801dx: Add call i8259_setup()Kyösti Mälkki
Observed with aopen/dxplplusu that without SeaBIOS (using GRUB2 payload) Linux kernel panics. < [ 0.000000] Using NULL legacy PIC < [ 0.000000] NR_IRQS: 2304, nr_irqs: 1024, preallocated irqs: 0 ... < [ 0.000000] unexpected #NM exception: ffff [#1] SMP PTI versus > [ 0.000000] NR_IRQS: 2304, nr_irqs: 1024, preallocated irqs: 16 ... > [ 0.004000] Enabling APIC mode: Flat. Using 3 I/O APICs > [ 0.008000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 > [ 0.028000] tsc: Fast TSC calibration using PIT > [ 0.032000] tsc: Detected 3198.436 MHz processor Change-Id: I1beb93a8fd04697f259aefddfd369aa79e3359b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-01-31mb/**/Kconfig: Properly override `DISABLE_HECI1_AT_PRE_BOOT`Angel Pons
Don't unconditionally override `DISABLE_HECI1_AT_PRE_BOOT`. Change-Id: I7d447e73f672877c76eecea1eb8b8f41f89ce686 Fixes: commit a0d9ad322fe603d4d4cbccda9c7edcfbf0b13409 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61478 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-31mb/**/Kconfig: Properly override `IGNORE_IASL_MISSING_DEPENDENCY`Angel Pons
Don't unconditionally override `IGNORE_IASL_MISSING_DEPENDENCY`. Change-Id: I02081d0f04be4af9cd765aa3b29295af40f9ca99 Fixes: commit 28fa297901ffd158631cfc9f562f38119eff628e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-01-31mb/google/brya/variant/agah: Update memory settingsBora Guvendik
Based on the agah schematic, add memory settings. BUG=b:215662929 TEST=none Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib45241d708d025ca75ed06e2bcf3997558723a62 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-31soc/intel/adl: Update devicetree based on remapping for TBT PCIeMAULIK V VAGHELA
ADL has 4 TBT root ports which are PCIe compliant. TBT uses PCIe coalescing logic where in case root port 0 is disabled, other enabled root port is remapped to port 0. coreboot handles this remapping scenarios for PCH and CPU PCIe root ports and not for TBT root ports. This patch uses the same function used for PCIe remapping to update devicetree based on coalescing and SoC needs to pass correct function number and number of slots. BUG=b:210933428 BRANCH=None TEST=Check if TBT remapping happens correctly and ACPI tables are generated correctly. Change-Id: Ied16191d6af41f8e2b31baee80cb475e7d557010 Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-31intel/common/block/pcie: Add NULL/count check in pcie_rp_update_devtreeMAULIK V VAGHELA
pcie_rp_update_devicetree function takes pcie_rp_group strcuture as an argument and SoC code passes the parameter in this structure. This pointer can be NULL and common code may try to dereference this NULL pointer. Also, group might have no data and SoC may pass this by indicating group count as zero (For example, for CPU or TBT root ports). These checks will prevent function from executing redundant code and returning early from the call as it's not required. BUG=b:210933428 BRANCH=None TEST=check if function returns early for group count 0 and there is no issue while booting board in case group count = 0. Change-Id: I132319bb05fdef1590c18302fc64cc76e15bea6d Signed-off-by: MAULIK V VAGHELA <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-31mb/google/brya: Create crota variantTerry Chen
Create the crota variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:215443524 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_CROTA Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: Ic8f1a0bde286d5d014dfdf87c2a417ca6ff8b3a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61416 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-31mb/amd/majolica: Add variant to disable HDMIZheng Bao
For one specific type of APU, it doesn't have HDMI. When we detect this APU, we need to explicitly disable HDMI in DDI settings, otherwise the system would freeze. Please refer src/mainboard/google/guybrush/variants/dewatt/variant.c Change-Id: I8d7637467d2f16377d3c3064cdb0934d1658fdf7 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61361 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-31mb/google/guybrush/guybrush: Add variant to disable HDMIZheng Bao
For one specific type of APU, it doesn't have HDMI. When we detect this APU, we need to explicitly disable HDMI in DDI settings, otherwise the system would freeze. Please refer src/mainboard/google/guybrush/variants/dewatt/variant.c BUG=b:215432928 Change-Id: I93fca8cf9870533da1bcca5fa28ff22085e65beb Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-31soc/amd/sabrina: Add PRE_X86_CBMEM_CONSOLE_SIZEFelix Held
Commit 86302a806c5cc9b575424305e761753710417692 (soc/amd/{common, cezanne,picasso}: Add PRE_X86_CBMEM_CONSOLE_SIZE) added this Kconfig option before the initial commit that added soc/amd/sabrina as copy of soc/amd/cezanne landed in the tree, so port the change forward to Sabrina. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I2e8df5e7b7f1ac0af772e8c565f616a68b28e29e Reviewed-on: https://review.coreboot.org/c/coreboot/+/61358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-31soc/intel/alderlake: Add Alder Lake P IGD device IDsKane Chen
This patch adds additional IGD device IDs as per document 638514. BUG=b:216420554 TEST=coreboot is able to probe the IGD device during PCI enumeration. Change-Id: I0cafe92581c454da5e4aeafd7ad52f0e65370b11 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61441 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-31util/lint: Remove SuperIO from checkpatch spellcheckMartin Roth
Patch 423e9e0fc0: Documentation/lint: Use Super I/O instead of SuperIO added the word SuperIO to the checkpatch spelling list. There were unfortunately some issues with this. 1) This introduced a problem because the comparison is used in different cases in different places. The misspelled word is compared ignoring the case, but when looking for the correct word, it looks through the list for the misspelling in all lowercase. When it couldn't find the word "superio" in the list, the variable came back uninitialized. 2) The spellcheck feature isn't enabled in checkpatch unless the option --strict is enabled, so this wasn't getting reported anyway. 3) SuperIO (or superio) will match the KCONFIG options such as CONFIG_SUPERIO_NUVOTON_NCT5104D, and suggest "Super I/O" which doesn't make any sense. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I464305af539926ac8a45c9c0d59eeb2c78dea17a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-01-30soc/intel/elkhartlake: Drop stale eNEM TODO commentSubrata Banik
This patch drops stale TODO comment about enabling eNEM on EHL. eNEM is non-POR on the elkhartlake product. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I47fd755dec2324e05e6349e51e15abcf26967604 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-29soc/mediatek/mt8186: Add register protect control for MT6366Rex-BC Chen
Some registers of PMIC init settings are protected, so we failed to set the correct value for init_setting. We disable protection before setting PMIC init setting and enable it afterward. BUG=b:216263707 TEST=PMIC setting value is set correctly. Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I94d73d9c8a137444988e65c3709d29a3a4c03c5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61390 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-28sc7280: Add Modem region to avoid modem cleanup in Secboot rebootT Michael Turney
Modem uses different memory regions based on LTE/WiFi. This adds correct carve-out to prevent region being disturbed. BUG=b:182963902 TEST=Validated on qualcomm sc7280 developement board Signed-off-by: T Michael Turney <quic_mturney@quicinc.com> Change-Id: I56bfb210606b08893ff71dd1b6679f1ec102ec95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58545 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-01-28util/lint/lint-stable-003-whitespace: add exception for gif filesFred Reitberger
Adding gif files to the whitespace exclude list, to prevent issue where commits were failing due to binary files. Change-Id: I56679780348579d01c81c6f1677e4ea456315c9e Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61460 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-28mb/google/brya/var/redrix: Enable MKBP wakeDaisuke Nojiri
To timely update stylus charging status (b:206012072), PCHG device events have been moved to MKBP. This patch registers the MKPB host event as a wake-up signal to match the change. EC filters other EC_MKBP_EVENT_* events (chromium:3413180). BUG=b:205675485,b:206012072 Cq-Depend: chromium:3413180 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: Ie4536b2c0ccc37f92dfa940c5a5712340a32c82c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-28lib/spd_cache.c: Drop comparison to {true, false}Elyes HAOUAS
Change-Id: I0ef8c0159c99606aad537fd5e14d3c74e32651d8 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61423 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-28soc/intel/xeon_sp/nb_acpi.c: Drop comparison to trueElyes HAOUAS
Change-Id: Ib9670ee22e36dd988a75b2f8dc565534927b6107 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2022-01-28mb/purism/librem_skl: disable HECI PCI deviceMatt DeVillier
As all librem_skl devices ship with the ME disabled via HAP bit and ME firmware "neutralized" via me_cleaner, the HECI1 PCI device should be marked off/disabled to ensure that heci_reset() is not called at the end of heci_init(), as this causes a 15s timeout delay when booting (introduced in commit cb2fd20 [soc/intel/common: Add HECI Reset flow in the CSE driver]). Change-Id: Ib6bfcfd97e32bb9cf5be33535d77eea8227a8f9f Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61408 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-28mb/google/herobrine: Add senor support QUP FW for I2C and SPIRavi Kumar Bokka
Add senor board to QUP FW load for: APPS I2C, ESIM SPI & fingerprint SPI. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board. Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I6fdd09bb437547e6d12eb60c4b2917d2a3074618 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59556 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-01-28sc7280: enable bl31 and SDI feature supportRavi Kumar Bokka
BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Change-Id: I61c695fb4fef3ae36ffc5a263236b9d40c299dc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/47904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2022-01-28mb/acer: Add Acer Aspire VN7-572GBenjamin Doron
Add initial support for Acer Aspire VN7-572G (Skylake-U). Also note that there are two similar boards, Aspire VN7-792G and Aspire VN7-592G; both are Skylake-H. These are not supported (yet). Do not flash images intended for Aspire VN7-572G on those boards: the GPIOs and HSIO routing will be different and may risk damage to the hardware. Working: - Payload - TianoCore (custom fork of MrChromebox's UefiPayloadPkg; edk2-202102) - OS - Fedora 35 (kernel 5.14.15) - Windows 10 20H1 (bugs present: battery paging fixed; abandoning testing) - Both DIMM slots - eDP and HDMI display (VBT partially matches vendor's configuration) - with FSP GOP - with IntelGopDriver (in payload: TianoCore) - with libgfxinit - Audio - Speakers and headphone jack - Internal microphone - HDMI audio - Devices - PCIe and SATA (unable to test M.2 SATA) - Discrete graphics, Ethernet and WiFi - USB ports (unable to test type-C, touchscreen and fingerprint reader) - Includes internal devices (Bluetooth, SD card reader and webcam) - TPM - Keyboard and touchpad - Optimus (see CB:28380, CB:40625 and CB:40628) - ACPI functionality - S3 suspend and resume - EC support - Internal flashing with flashrom - CMOS settings In progress: - EC SMM functionality Not working: - vboot (breaks boot): See CB:58249 Notes: - `tpm2_pcrallocate` to enable SHA256 PCR bank Not implemented: - WMI Change-Id: I6340116abfeb2fbd280d143b74d323e4da3566f6 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35523 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-28crossgcc: Update acpica from 20210331 to 20211217Elyes HAOUAS
Changes: Version 20211217: https://acpica.org/node/197 Version 20210930: https://acpica.org/node/196 Version 20210730: https://acpica.org/node/195 Version 20210604: https://acpica.org/node/193 Change-Id: I3a03b74e95f910b50aa2f7ce502b1e9ad5b6df37 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-28IASL: Ignore IASL's "Missing dependency" warningElyes HAOUAS
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects: 1) If _PRS is present, must have _CRS and _SRS 2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS) 3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS) 4) If _SRS is present, probably should have a _DIS (Remark only) IASL will issue a warning for each missing dependency. Ignore this warnings for existing ASL code and issue a message when the build is complete. Change-Id: I28b437194f08232727623009372327fec15215dd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-28soc/intel/common/gpio: Skip GPIO PAD locking in recovery modeSubrata Banik
The recovery mode is meant to provide fixes for the platform deformity hence, skip locking the GPIO PAD configuration to provide the same flexibility to the platform owner while booting in recovery mode. BUG=b:211950520 TEST=Able to build and boot the brya. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I0f0a3cfb2be7f2a5485679f6a3d8cb4fb407fcf4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61424 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-28mb/google/zork/var/shuboz: Add SPD ID for MT40A512M16TB-062E:RKane Chen
Add supported memory parts in "mem_parts_used.txt" and generate the SPD ID 0x04 for the parts. Shuboz memory table as follow: value Vendor Part number 0000 MICRON MT40A512M16TB-062E:J 0001 HYNIX H5AN8G6NCJR-XNC 0010 MICRON MT40A1G16KD-062E:E 0011 SAMSUNG K4AAG165WA-BCWE 0100 MICRON MT40A512M16TB-062E:R BUG=b:216571906 BRANCH=zork TEST=emerge-zork coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: Ib0100456457adabed6fd6615e0873de2cf9acb98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61373 Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-28soc/intel: Abstract the common block API for TCSS registers accessJohn Zhao
The existing TCSS registers access is through the REGBAR. There will be future platforms which access the TCSS registers through the Sideband interface. This change abstracts the common block API for TCSS access. BUG=b:213574324 TEST=Build platforms coreboot images successfully. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I3e2696b117af24412d73b257f470efc40caa5022 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-28src/{drivers,soc}: Fix some code indentsElyes HAOUAS
Change-Id: I55682de4a1bc74f170e2044de35b0d8d53ef51ff Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61413 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-28soc/intel/common/cse: skip heci_init() if HECI1 is disabledMatt DeVillier
If the HECI1 PCI device is disabled, either via devicetree or other method (HAP, me_cleaner), then we don't want/need to program a BAR, set the PCI config, or call heci_reset(), as the latter will result in a 15s timeout delay when booting. Test: build/boot Purism Librem 13v2, verify heci_reset() timeout delay is no longer present. Change-Id: I0babe417173d10e37327538dc9e7aae980225367 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61407 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-28mb/google/brya: Remove EC_GOOGLE_CHROMEEC_ACPI_MEMMAP KconfigTim Wawrzynczak
The EC_GOOGLE_CHROMEEC_ACPI_MEMMAP is intended for Chrome microchip ECs only, which have different requirements as to the amount of memory mapped space they can claim. The brya family of boards does not use any microchip ECs, therefore remove this Kconfig. BUG=b:214460174 TEST=boot brya4es to kernel, no EC errors seen in cbmem log, EC software sync still works. Change-Id: I6e9858f29d079140ec43341de90f222b03986edb Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-28mb/google/dedede/var/drawcia: Change power sequencing of Camera and VCMVarshit B Pandya
Drawcia's MIPI camera sensor and VCM both share the same reset GPIO from the PCH. The current power sequence does not take this into account, and this leads to an unbalanced ref count of the reset GPIO, which can cause one or the other of the devices to reset unexpectedly. This patch corrects that by explicitly sequencing the reset GPIO for both devices, which the builtin refcounting of this driver will automatically handle. BUG=b:214665783 TEST=Build, boot to OS and check VCM once camera stream off Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: Ib676fd1f43dbd9cf75e4aff01baab4a4bb4e2a89 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-28driver/intel/mipi_camera: Increase max power ops count to 6Varshit B Pandya
Current max count for camera power ops is 5 which is not sufficient. If we increase the ops by 1 in current variants the compiler will not throw error for intel mipi camera driver. Hence increase current max count for camera power ops to 6 from 5. BUG=b:214665783 TEST=Build and boot to OS Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I4f4c090f2275616816dfc697f27520cd1cbc1a80 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61146 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-28soc/intel/alderlake: Enable CPPCv3Sridahr Siricilla
The patch defines the following helper functions: get_cpu_scaling_factor(): Returns scaling factors of big and small core. cpu_is_nominal_freq_supported(): Returns true if CPU supports Nominal Frequency, otherwise false. cpu_is_nominal_freq_supported(): Check CPU supports nominal frequency or not. The patch also enables CPPCv3 support for Intel Alder Lake which is based on hybrid core architecture. TEST=Verified Nominal Frequency and Nominal Performance are getting updated for ADL-P small and big cores correctly. Signed-off-by: Sridahr Siricilla <sridhar.siricilla@intel.com> Change-Id: I963690a4fadad322095d202bcc08c92dcd845360 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-28soc/intel/common: Implement ACPI CPPCv3 package to support hybrid coreSridhar Siricilla
The patch implements ACPI CPPCv3 package. It implements and updates the following methods: generate_cppc_entries(): Updates method to support CPPCv3 package acpi_get_cpu_nominal_freq(): Calculates CPU's nominal frequency acpi_get_cpu_nomi_perf(): Calculates nominal performance for big and small cores. acpigen_write_CPPC_hybrid_method(): It generates ACPI code to implement _CPC method. acpigen_cppc_update_nominal_freq_perf(): It updates CPPC3 package if cpu supports Nominal Frequency. It generates ACPI code which sets Nominal Frequency and updates Nominal Performance. It uses below calculation to update the Nominal Frequency and Nominal Performance: Nominal Frequency = Max non-turbo ratio * cpu_bus_frequency Nominal Performance = Max non-turn ratio * cpu scaling factor CPU scaling factor varies in the hybrid core environment. So, the generated ACPI code updates Nominal Performance based on the CPU's scaling factor. TEST=Verified CPPCv3 package is getting created in the SSDT table. Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: ravindr1 <ravindra@intel.com> Change-Id: Icd5ea9e70bebd1e66d3cea2bcf8a6678e5cc95ca Reviewed-on: https://review.coreboot.org/c/coreboot/+/59359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2022-01-28libpayload: Refer to vboot source consistentlyPatrick Georgi
Don't assume that libpayload is built from a fully checked out coreboot tree. There's already an override when building vboot, so reuse that override when referring to its header files. Signed-off-by: Patrick Georgi <pgeorgi@google.com> Change-Id: I503c69a593dd68b3a974fbdbb64d7bb25d6c7f63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-01-28ec/google/chromeec: Consider custom_pld when checking USB port numberWon Chung
Currently only PLD group is used to check USB port number. In the future, we want to use custom PLD fields, so custom PLD should also be considered when checking USB port number. BUG=b:216376040 TEST=emerge-brya coreboot & SSDT dump in Brya test device Signed-off-by: Won Chung <wonchung@google.com> Change-Id: Id8076a2a952de61a6f38fbdecd76e991487bf696 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61387 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-27soc/amd/sabrina/chipset.cb: update USB portsFelix Held
The corresponding mainboard design guide was used as a reference here. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie61af7dab35b560d2eec1ea62058f3a4dad5cb0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61094 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina/include/smu: update mailbox SMN addressesFelix Held
The SMU message response register was moved compared to Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie384de52b1efb1d52f9018315a4b72916a4c9cee Reviewed-on: https://review.coreboot.org/c/coreboot/+/61095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina/include/southbridge: add new I2C_PAD_CTRL bitsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iac1b7308851c34bd1556c02af6b270e9346073e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina: drop PM_ESPI_CS_USE_DATA2 define and eSPI util codeFelix Held
The Sabrina SoC doesn't have the PM_ESPI_CS_USE_DATA2 bit defined in the PM_SPI_PAD_PU_PD register. It also doesn't have a physical LPC interface any more, so there are no LPC pins that can be reconfigured as eSPI interface. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I02bc8d007901c71942475fe707637c5da7227230 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina: drop CPPC codeFelix Held
The CPPC feature isn't available on the Sabrina SoC, so drop the corresponding code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I71a1b0717571729ebca3600ac433e621cafc4e61 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina: update PCI devices in devicetree.cbFelix Held
Also update mb/amd/chausie accordingly. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Idb4dcffa48c3dbdcffb66f1398b99ee96562efb9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina: update pci_devs.hFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic0226afd9e7fffd6bf196f06ee6c34b6b9c92f30 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina/fsp_m_params: drop sata_enable UPD writeFelix Held
There are no SATA controllers on the Sabrina SoC. The UPD field will be removed later as a part of the initial UPD header update. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iedefd9f150e5bcb78173288e5fc9f1bbd6b498cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/61091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-01-27soc/amd/sabrina/include: update smi.hFelix Held
Some of the names have slightly changed in the PPR, but I kept the current names for consistency across all AMD SoCs in coreboot. Revision 1.50 of the PPR #57243 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6bda656015858a57e221b8d7819f944c21564a39 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina/include/data_fabric: update IOMS0_FABRIC_IDFelix Held
The data fabric ID table in PPR #57243 Rev 1.50 has a different IOMS0 fabric ID than Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I32890b5c03219f6ebf8180929d71ef726d382483 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-01-27soc/amd/sabrina: drop graphics.cFelix Held
Since we don't need to support PCI ID remapping for finding the correct VBIOS binary for the integrated GPU, graphics.c can be dropped for now. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifd5b678f472b3b5888353efd057203eb641be874 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina/cpu: update CPUIDFelix Held
Sabrina is family 17h model A0h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I01e02e3491fb90941c767058986da876bdf7ca1d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27soc/amd/sabrina: add additional UART controllersFelix Held
Compared to Cezanne there are 3 more UART controllers. Revision 1.50 of the PPR #57243 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I628b1a7a0930f3409acdcabda2b864d42bf6bd23 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2022-01-27soc/amd/sabrina/gpio: update GPIO definitions and gpio_event_tableFelix Held
The GPIO and GPIO MUX mapping as well as some GPIO to GEVENT mappings have changed compared to Cezanne. Sabrina also doesn't have a remote GPIO bank. Revision 1.50 of PPR #57243 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iabb85a3d24c881055e94400d08d01505df44a07a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2022-01-27soc/amd/sabrina/include/amd_pci_int_defs: add additional UARTsFelix Held
Compared to Cezanne there are 3 more UARTs controllers. The PCI interrupt index table in the new SoC's PPR #57243 Rev 1.50 doesn't contain a PIRQ mapping for UART4. The reference code has a mapping for this and it uses PIRQ mapping index 0x77 for UART4 and not for I2C5. Since the I2C5 controller isn't owned by the x86 side and I didn't see any mapping of the I2C5 controller into the x86 MMIO space, this seems very plausible. Also add the corresponding fields to the ACPI code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I44780f5bc20966e6cc9867fca609d67f2893163d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-27mb/google/brya/var/taniks: Enable Bayhub LV2 driverJoey Peng
Some SKUs of google/taniks have a Bayhub LV2 card reader chip, therefore enable the corresponding driver for the mainboard. BUG=b:215487382 TEST=Build FW and checking SD card reader register is correct. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I34adb122bd2edc343e894a53bc12e105f4225984 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-27util/chromeos: Update extract_blobs scriptMatt DeVillier
- Handle older CrOS firmware which lacks a COREBOOT FMAP region - Add support for all blobs used in CrOS firmware 2013 to current - Put extracted blobs in their own directory Change-Id: Idaa39eca3be68a9327cead9b21c35a6c7a3a8166 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-27drivers/intel/usb4/retimer: Use usb4_retimer_scope replace dev pathEric Lai
Without acpi name, acpi_device_path will return NULL. <NULL>: Intel USB4 Retimer at GENERIC: 0.0 Replace with usb4_retimer_scope for the identify. BUG=b:215742472 TEST=show below meaasge in coreboot log \_SB.PCI0.TMD0.HR : Intel USB4 Retimer at GENERIC: 0.0 \_SB.PCI0.TMD1.HR : Intel USB4 Retimer at GENERIC: 0.0 Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idfa8b204894409b11936e5f221c218daa206cc02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-27Makefile.inc: Don't ignore IASL's "multiple types" warningElyes HAOUAS
Intel Lynx Point ASL code is fixed. So don't ignore "Multiple types (Device object requires either a _HID or _ADR, but not both)" warning. Change-Id: Ie9398879a76ad3d36454772a1c23da083af14b59 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-27util/coreboot-configurator: Add contrib filesSean Rhodes
Add contrib files for: * debian (Tested on Ubuntu 20.04, 21.10, MX Linux 21 and Debian) * PKGBUILD (Tested on Manjaro 21) * flatpak (Untested) Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie9f0193ed28c0842661426204fc88ec00091fbae Reviewed-on: https://review.coreboot.org/c/coreboot/+/59257 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-27util: Add coreboot-configuratorSean Rhodes
A simple GUI to change settings in coreboot's CBFS, via the nvramtool utility. Test on the StarBook Mk IV running coreboot 4.15 with: * Ubuntu 20.04 * Ubuntu 21.10 * MX Linux 21 * elementary OS 6 * Manjaro 21 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I491922bf55ed87c2339897099634a38f8d055876 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2022-01-27cpu/intel/socket_p: Drop 'select SSE'Elyes HAOUAS
SSE is already selected by SSE2 through model_{1067x,6fx}/Kconfig Change-Id: I3641118905f1fcc1e34d7fe4f7ca3082c3cf0d3b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27cpu/intel/socket_m: Drop 'select SSE'Elyes HAOUAS
SSE is already slected by SSE2 through model_6{e,f}x/Kconfig Change-Id: Ibe215cfe6aa6d7c215dd62e1ab2966d079c2a78d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27cpu/intel/socket_LGA775: Drop 'select SSE'Elyes HAOUAS
SSE is already selected by SSE2 through model_1067x/Kconfig Change-Id: I7b16af0277dc01c5905c5990244d3738a33723b3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61317 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27cpu/intel/socket_FCBGA559: Drop 'select SSE'Elyes HAOUAS
SSE is already selected by SSE2 through model_106cx/Kconfig Change-Id: I31b8345fdd901e1d05df5fa8351db3255f9cf9cb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61316 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27nb/intel/sandybridge/raminit_mrc.c: Use <device/dram/ddr3.h> macrosElyes HAOUAS
Change-Id: Icca870d1c97a2737dec3f31b0f2e4c3222c711ae Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27nb/intel/sandybridge/raminit_mrc.c: Use DDR3_SPD_SODIMM macroElyes HAOUAS
Change-Id: Ibbb6e6d44b1415b18aa59310f4d36d61b9a2a080 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27nb/intel/sandybridge/raminit_mrc.c: Use <smbios.h> macrosElyes HAOUAS
Use macros defined in <smbios.h> for 'ddr_type' and 'bus_width' Change-Id: I0501147139387cd9b5c7ec6b7ba7f8a5c5bd18bb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-27mb/google/kukui: Add DRAM support for burnet/escheKevin Chiu
0x18 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B 0x19 HYNIX 4GB LP4X H54G56CYRBX247 0x1a SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL 0x1b HYNIX 8GB LP4X H54G68CYRBX248 BUG=b:165768895 BRANCH=kukui TEST=emerge-jacuzzi coreboot Change-Id: Ib1c09ff2b88bf121de702985680b2388c0fb8427 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-27mb/google/kukui: Add dedicated memory map for kappaKevin Chiu
Add a dedicated memory mapping table starting at index 0x40: 0x40 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCR 0x41 HYNIX 4GB QDP LP4X H9HCNNNCPMALHR-NEE 0x42 MICRON 4GB LP4X MT53E1G32D4NQ-046 WT:E 0x43 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:A 0x44 MICRON 4GB LP4X MT53E1G32D2NP-046 WT:B 0x45 HYNIX 4GB LP4X H54G56CYRBX247 0x46 SAMSUNG 4GB LP4X K4UBE3D4AB-MGCL 0x48 SAMSUNG 4GB LP4X K4UBE3D4AA-MGCL 0x49 MICRON 8GB LP4X MT53E2G32D4NQ-046 WT:A 0x4A HYNIX 4GB QDP LP4X H9HCNNNCPMMLXR-NEE 0x4B Micron MT29VZZZAD9GQFSM BUG=b:162379736 BRANCH=kukui TEST=emerge-jacuzzi coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: I97f296cb8c35fd2f979a05d0b97a0562c1b472f3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-27mb/google/dedede/var/metaknight: Set core display clock to 172.8 MHzDavid Wu
When using the default initial core display clock frequency, Metaknight has a rare stability issue where the startup of Chrome OS in secure mode may hang. Slowing the initial core display clock frequency down to 172.8 MHz as per Intel recommendation avoids this problem. The CdClock=0xff is set in dedede baseboard,and we overwrite it as 0x0 (172.8 MHz) for metaknight. BUG=None BRANCH=dedede TEST=Build firmware and verify on fail DUTs. Check the DUTs can boot up in secure mode well. Change-Id: I987277fec2656fe6f10827bc6685d3d04093235e Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-01-27mb/google/brya/variants/volmar: Init devicetree for volmarDavid Wu
Init basic override devicetree based on schematics BUG=b:211891086 TEST=FW_NAME="volmar" emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I40b364e3df2f04a6b828f4f288667b96b6e0bd22 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61299 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-01-27mb/google/brya/var/brask: set tcc_offset value to 10℃David Wu
Set tcc_offset value to 10 in devicetree for Thermal Control Circuit (TCC) activation feature. This value is suggested by Thermal team. BUG=b:214890058 BRANCH=None TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I86acb172ed427d45973b9360e0413978cbd46645 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-27soc/intel/common/cse: Drop CSE library usage in bootblockSubrata Banik
This patch drops the CSE common code block from getting compiled in bootblock without any SoC code using heci communication so early in the boot flow. BUG=none TEST=Able to build brya, purism/librem_skl without any compilation issue. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib4d221c6f19b60aeaf64696e64d0c4209dbf14e7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61382 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-01-27soc/intel/skylake: move heci_init() from bootblock to romstageMatt DeVillier
Aligns with all other soc/intel/common platforms calling heci_init(). Test: build/boot Purism Librem 13v2 Change-Id: I43029426c5683077c111b3382cf4c8773b3e5b20 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61378 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-27mb/google/zork/var/vilboz: Add new memory K4AAG165WB-BCWEFrank Wu
Add new ram_id:1100 for memory part K4AAG165WB-BCWE. BUG=b:212507858 TEST=Generate new spd file and build coreboot. Then boot from the DUT with new memory K4AAG165WB-BCWE Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Change-Id: I4e409a5a5a3b3d1b0013d2c020eeb4c0aeec51ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/60191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-26src: Add missing 'void' in function definitionElyes HAOUAS
Change-Id: I7fa1f9402b177a036f08bf99c98a6191c35fa0b5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-26vc/amd/agesa: fix out-of-bounds readJason Nien
Fix the out-of-bounds read issue found by Coverity. TEST=none Signed-off-by: Jason Nien <finaljason@gmail.com> Change-Id: I01e134cb6b025bf7cb5030cd9378297d7f6df509 Reported-by: Coverity (CID:1376956) Reviewed-on: https://review.coreboot.org/c/coreboot/+/58803 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-26soc/intel/cannonlake: Add PcieRpHotPlug config to FSP-MMatt DeVillier
Commit b67c5ed [3rdparty/fsp: Update submodule pointer to newest master] updated the FSP binaries/headers for Comet Lake, which included a change moving PcieRpHotPlug from FSP-S to FSP-M. Unfortunately the existing UDP in FSP-S was left in and deprecated, which allowed the change to go unnoticed until it was discovered that hotplug wasn't working. Since other related platforms (WHL, CFL) share the SoC code but use different FSP packages, add the setting of the PcieRpHotPlug UPD to romstage/FSP-M and guard it with '#if CONFIG(SOC_INTEL_COMETLAKE)'. Test: build/boot Purism Librem 14, verify WiFi killswitch operates as expected / WiFi is re-enabled when turning switch to on position. Change-Id: I4e1c2ea909933ab21921e63ddeb31cefe1ceef13 Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61377 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-26soc/intel/denverton_ns: Fix logging levelKyösti Mälkki
Level should match that used in print_num_status_bits(). Change-Id: I1beb65e4c141e195dd59eaa2bf55fff6e7dc910d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Jeff Daly <jeffd@silicom-usa.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2022-01-26Revert "mb/google/brya/var/brask: Configure the ISOLATE pin of LAN"Alan Huang
This reverts commit 2bf2e6d1ccd87cdd8d9c189972eae89e47e542c8. According to the latest schematics, Brask supports D3-Hot for RTL8125 and does not need to operate the ISOLATE pin. BUG=b:193750191 BRANCH=None TEST=emerge-brask coreboot chromeos-bootimage Test with command suspend_stress_test Change-Id: Ica6bfb810887861f6b17ff527373824547e2406c Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61023 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-26util/mb/google: add support for braskZhuohao Lee
Add the file templates for creating a new variant of Brask. BUG=b:215091592 TEST=new_variant.py and build coreboot pass for the new variant. Change-Id: I67e4ed450d6033fed7419bd7c76c127ecd942fe8 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61184 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-26mb/google/brya/var/kano: Reduce reset delay time to 20ms for ELAN TSDavid Wu
Set register "reset_delay_ms" to 20 to reduce power resume time. BUG=b:204009580 TEST=tested on kano Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Ib0695edd7c342c65df9138b1590281c5f442769b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-26MAINTAINERS: add maintainers for mb/amd/chausieFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ie39e42407fe4677d4c8e991824588d2d598a73ae Reviewed-on: https://review.coreboot.org/c/coreboot/+/61360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-26MAINTAINERS: add maintainers for soc/amd/sabrinaFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8630b8ac472af94bbeede2bcadf4d0a750b44e5c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61359 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-26mb/google/guybrush/var/dewatt: Update Elan touchpad interrupt triggerKenneth Chan
Update Elan touchpad interrupt trigger to level low from edge low to keep consistency with Synaptics touchpad. Checked with Elan PM Iris and other projects(spherion), the touchpad can be set to edge or level low trigger. Sepherion Elan touchpad IRQ setting: https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/v5.4/arch/arm64/boot/dts/mediatek/mt8192-asurada.dtsi;l=415?q=mt8192-asurada.dtsi&ss=chromiumos%2Fchromiumos%2Fcodesearch:src%2Fthird_party%2Fkernel%2F BUG=b:214143249 TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Elan and Synaptics touchpad wakeup from s0i3 well with proto build. Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: Ifac49b131cadc1f8838bb6243ad6d17feb272bd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61365 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-01-26mb/google/guybrush/var/dewatt: Update touchpad GPIO configurationKenneth Chan
Update GPIO configuration to fix Synaptics touchpad can't wakeup system from s0i3. BUG=b:214143249 TEST=emerge-guybrush coreboot chromeos-bootimage; Tested Synaptics touchpad wakeup from S3 with proto build. Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Change-Id: I29734595d37283adc6fd4a0ed17f51a5c9061796 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61174 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-01-26soc/intel/alderlake: Add GPIO Controller device ID for ADL-NUsha P
Add PCH ACPI Device ID for Alder Lake N SOC GPIO Controller. Document: Alder Lake N Platform EDS Volume 1 (Doc# 645548) Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I6eb15751dd303b4b445cb64f25a040302e50c09d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61172 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2022-01-26soc/mediatek/mt8186: Use BIT() macro for arbiter enable bitRex-BC Chen
Replace (1 << x) with BIT(x) in pmic_wrap.h. BUG=none TEST=build pass Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I463589f02065a228a8af74447b4586e5b54e0b3b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61351 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-26soc/intel/alderlake: Choose non-posted write to lock GPIO PADSubrata Banik
Set the SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI config on Alder Lake to instruct Pad Configuration Lock to use non-posted sideband writes as posted write is not supported on Alder Lake while locking GPIO pads. BUG=b:211573253, b:211950520 TEST=None Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Id8d394b97de9c328b3f75df3649d7efc782f006b Reviewed-on: https://review.coreboot.org/c/coreboot/+/60966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 12:54:32 +0000