| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds a driver for a new RTC from Micro Crystal. Supported
features are:
* configure backup voltage switchover via devicetree
* configure backup capacitor charging mode via devicetree
* set date if a voltage drop on backup voltage was detected
to either a user definable (devicetree) or coreboot build date
Change-Id: I37176ea726e50e4e74d409488981d7618ecff8bb
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Updating from commit id e0a6a512b:
2022-02-03 22:59:34 +0100 - (Merge changes from topic "msm8916" into integration)
to commit id 7805999e6:
2022-09-05 16:42:34 +0200 - (Merge changes from topic "st-nand-updates" into integration)
This brings in 1030 new commits.
Change-Id: I981956fbdcbcfa4ce185652478b9bb30d40f5686
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Pass the reset gpio parameter to BL31 to support SoC reset.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ifdfbd6bd82f64b084f6349cb617443053c89a3f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67357
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The implementations of register_reset_to_bl31() are the same for
MedaiTek platforms, so we extract them to soc/common/bl31.c.
BUG=None
TEST=build pass
Change-Id: I297ea2e18a6d7e92236cf415844b166523616bdf
Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some of the pll settings are incorrect, which cause problems in GPU
after booting into kernel.
- MFGPLL opp_ck_en bit isn't located at MFGPLL_CON1, so we need to fix
it to enable MFGPLL properly.
- Switch SPMI clock muxes to 260M to avoid kernel hang while probing
SPMI kernel driver.
TEST=GPU bringup correctly.
BUG=b:233720142
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I971109a5f72e3307899daaf5a5f26022124b559b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67355
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
The T4 of ANX7625 power on sequence should be larger than 0ms, but it's
-59ms now. So add 70ms delay between DSI_TE and LCM_RST.
BUG=b:242352915
TEST=The sequence T4 is larger than 0ms when power on.
Change-Id: I6b888707ec3c0612e396564e77c4cdbe92614dc5
Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: wen zhang <zhangwen6@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Initialize winterhold devicetree.
BUG=b:241196632
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9fe224cdc2acb1f13d3bf9341b487892c15f8ea2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67308
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This reduce the difference with linux v6.0-rc3.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I15e1a935665c38b8a2109d412b1d16f935cbb402
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add a test to make sure that the linter fails correctly.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I971951d4248dd10abe4c622025fdaf86e014c6cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The rules.h & compiler.h includes were removed in previous commits, so
add the checks to keep them out to the linter.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If4964ff26f5e83abbbdd26c2b1cd9a2eab5a0a0d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67350
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The header file `compiler.h` is automatically included in the build by
the top level makefile using the command:
`-include $(src)/commonlib/bsd/include/commonlib/bsd/compiler.h`.
Similar to `config.h`, 'kconfig.h`, and 'rules.h`, this file does not
need to be included manually, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5d3eb3f5e5f940910b2d45e0a2ae508e5ce91609
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67349
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The header file `rules.h` is automatically included in the build by the
top level makefile using the command:
`-include src/soc/intel/common/block/scs/early_mmc.c`.
Similar to `config.h` and 'kconfig.h`, this file does not need to be
included manually, so remove it.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I23a1876b4b671d8565cf9b391d3babf800c074db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67348
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Without these, all SuperSpeed ports are wired to EHCI #2.
"superspeed_capable_ports" and "xhci_switchable_ports" should fit both
CMT and SFF variants, while "xhci_overcurrent_mapping" should be
consistent with the first 4 elements of mainboard_usb_ports[].
With this commit, SuperSpeed devices plugged in SuperSpeed ports are
wired to the XHCI on my own Z220 SFF.
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Change-Id: Ifddecfd1d32ed6ab84d7eed8dc2d85d83cbebbcc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67089
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove extra 'o' in "Tech*o*nologies".
Change-Id: Icf24e00fb895a670ea798f64a79035d858ec0d4f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67343
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Follow FT6_SOC_GPIO_PM&Strap_20220815A.XLSX
update Gpio setting
BUG=b:240824497
BRANCH=None
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I2086c326cbf46ba6378d18d37dcbbe9fafa6b2bc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Currently, if for some reason, the file-size command is called on an
empty string, the build will hang waiting for stdin input to cat.
Since wc accepts a file, this cat was unnecessary anyway. Put the file
name in quotes so an empty string will result in calling wc on an
actual null file instead of just leaving the filename blank. This
results in an error, and will probably halt the build.
BUG=214790407
TEST=Build default build.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I3dacf1968ed897a8ebd00f95583c2f254a7fb55a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The top-down allocation feature was merged prematurely before
platforms that don't report their resources correctly were fixed.
Let's turn it off by default.
Change-Id: I982e6d7355b9e689de10357d6c16ed718705270e
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67328
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
git submodules should be ignored when parsing the coreboot tree for
lint errors. Those should be handled in their own commit checks.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I62b58f0c536312fe4677855bca8f44bc7d3ebc85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This reverts commit 117e436115484f0ce184114b22b716616592e77e.
Depends on top-down allocation to keep the behavior to place
hot-plug reservations above 4G. The latter was merged prema-
turely, though.
Change-Id: I5721cb84b29fc42240dff94f49a94461d88e7fbc
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67329
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch fixes a hidden issue present inside FSP-S while coreboot
decides to skip performing MP initialization by overriding FSP-S UPDs
as below:
1. CpuMpPpi ------> Passing `NULL` as coreboot assume FSP don't need
to use coreboot wrapper for performing any
operation over APs.
2. SkipMpInit -----> Set `1` to let FSP know that coreboot decided
to skip FSP running CPU feature programming.
Unfortunately, the assumption of coreboot is not aligned with FSP when
it comes to the behaviour of `CpuMpPpi` UPD. FSP assumes ownership of
the APs (Application Processors) upon passing `NULL` pointer to the
`CpuMpPpi` FSP-S UPD.
FSP-S creates its own infrastructure code after seeing the CpuMpPpi
UPD is set to `NULL`. FSP requires the CpuMpPei module, file name `UefiCpuPkg/CpuMpPei/CpuMpPei.c`, function name `InitializeCpuMpWorker`
to perform those additional initialization which is not relevant for
the coreboot upon selecting the SkipMpInit UPD to 1 (a.k.a avoid
running CPU feature programming on APs).
Additionally, FSP-S binary size has increased by ~30KB (irrespective of
being compressed) with the inclusion of the CpuMpPei module, which is
eventually not meaningful for coreboot.
Hence, this patch selects `MP_SERVICES_PPI_V2_NOOP` config
unconditionally to ensure pass a valid pointer to the `CpuMpPpi` UPD
and avoid APs getting hijacked by FSP while coreboot decides to set
SkipMpInit UPD.
Ideally, FSP should have avoided all AP related operations when
coreboot requested FSP to skip MP init by overriding required UPDs.
TEST=Able to drop CpuMpPei Module from FSP and boot to Chrome OS on
Google/Redrix, Kano, Taeko devices with SkipMpInit=1.
Without this patch:
Here is the CPU AP logs coming from the EDK2 (open-source)
[UefiCpuPkg/CpuMpPei/CpuMpPei.c] when coreboot sets `NULL` to the
CpuMpPpi UPD.
[SPEW ] Loading PEIM EDADEB9D-DDBA-48BD-9D22-C1C169C8C5C6
[SPEW ] Loading PEIM at 0x00076F9A000 EntryPoint=0x00076FA24E2
CpuMpPei.efi PROGRESS CODE: V03020002 I0
[SPEW ] Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE
[SPEW ] Notify: PPI Guid: F894643D-C449-42D1-8EA8-85BDD8C65BDE,
Peim notify entry point: 76FA0239
AP Loop Mode is 2
GetMicrocodePatchInfoFromHob: Microcode patch cache HOB is not found.
CPU[0000]: Microcode revision = 00000000, expected = 00000000
[SPEW ] Register PPI Notify: 8F9D4825-797D-48FC-8471-845025792EF6
Does not find any stored CPU BIST information from PPI!
APICID - 0x00000000, BIST - 0x00000000
[SPEW ] Install PPI: 9E9F374B-8F16-4230-9824-5846EE766A97
[SPEW ] Install PPI: 5CB9CB3D-31A4-480C-9498-29D269BACFBA
[SPEW ] Install PPI: EE16160A-E8BE-47A6-820A-C6900DB0250A
PROGRESS CODE: V03020003 I0
With this patch:
No instance of `CpuMpPei` has been found in the AP UART log with FSP
debug enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8ebe0bcfda513e79e791df7ab54b357aa23d295c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66706
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
In order to fix the USB port of type-C dongle has no function after
reboot/shutdown, modify ufp which is in google_chromeec_usb_pd_get_info
from the bit1 of type-c role (PD_CTRL_RESP_ROLE_DATA).
BUG=b:239138412
TEST=Built coreboot image and verified that using this patch can detect
usb drive after reboot.
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I73a4a6ec37129388783599125f067068d155d93f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67168
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
GSPI0 pads required muxing to NF8. Support for extended
native functions was added in
commit b6c32d7fe4ea98ba8b3a10cb5ce46448801855b8
BUG=b:244610269
TEST=build and booted on Rex
Change-Id: Iab4e0bc6890cd8e976c513fe87dda0da9b5f2ee0
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
|
|
index I/O argument to getopt_long is not the index to argv. Instead it
is an index into the optlong array corresponding to the parsed option.
Also getopt() uses a global variable optind to track the index of the
next argument to be processed. Use the optindex variable as an index to
extract the filename from argv.
BUG=None
TEST=Build and use amdfwread to read the Soft-fuse bits from Guybrush
BIOS image. Observed no changes before and after the changes.
Change-Id: I33c74a0c8e12c5af76954524cf7294b7541d286b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66553
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This adds source file dependencies to utilities so that they are rebuilt
when the source is changed. Previously, binaries were only built if they
did not already exist and never rebuilt to reflect source file changes.
BUG=none
TEST=verified binaries are rebuilt when source files are touched.
Change-Id: I4775fe0e00e0f5d4f8b4b47331d836aba53c0e69
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Robert Zieba <robertzieba@google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add multiple fan support for dptf policies
BUG=b:235254828
BRANCH=None
TEST=Built and tested on Redrix system for two fans
Change-Id: I96ead90e3b805bd20de03e4bef4fa4b9fbaaaedd
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This project concluded and the coreboot implementation is no longer
required.
BUG=b:244596639
BRANCH=firmware-brya-14505.B
TEST=none
Signed-off-by: Jack Rosenthal <jrosenth@chromium.org>
Change-Id: Ie647dac7ad4879ec1b11baa0a8cb0990af56852f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67299
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1ff3302acdd5bc5d17a5d394d953b6877750b6a6
Signed-off-by: Martin Roth <martin@coreboot.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Update DPTF parameters from internal thermal team.
BUG=b:244373677
BRANCH=firmware-dedede-13606.B
TEST=Build image and verified by thermal team.
Change-Id: I8415e0d25a79764f0c1d11688728b7caa3b3d6a4
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
We currently have two competing mechanisms to limit the placement of
resources:
1. the explicit `.limit` field of a resource, and
2. the IORESOURCE_ABOVE_4G flag.
This makes the resource allocator unnecessarily complex. Ideally, we
would always reduce the `.limit` field if we want to "pin" a specific
resource below 4G. However, as that's not done across the tree yet,
we will use the _absence_ of the IORESOURCE_ABOVE_4G flag as a hint
to implicitly lower the `limit` of a resource. In this patch, this
is done inside the effective_limit() function that hides the flag
from the rest of the allocator.
To automatically place resources above 4G if their limit allows it,
we have to allocate from top down. Hence, we disable the prompt for
RESOURCE_ALLOCATION_TOP_DOWN if resources above 4G are requested.
One implication of the changes is that we act differently when a
cold-plugged device reports a prefetchable resource with 32-bit
limit. Before this change, we would fail to allocate the resource.
After this change, it forces everything on the same root port below
the 4G line.
A possible solution to get completely rid of the IORESOURCE_ABOVE_4G
flag would be rules to place resources of certain devices below 4G.
For instance, the primary VGA device and storage and HID devices
could be made available to a payload that can only address 32 bits.
For now, effective_limit() provides us enough abstraction as if the
`limit` would be the only variable to consider. With this, we get
rid of all the special handling of above 4G resources during phase 2
of the allocator. Which saves us about 20% of the code :D
Change-Id: I4c7fcd1f5146f6cc287bd3aa5582da55bc5d6955
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65413
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `IORESOURCE_ABOVE_4G` flag was only explicitly set for our dummy
device that reserves resources behind a hotplug port. The current re-
source allocator implicitly extends this to all devices below the port,
including real ones. Let's make that explicit, so future changes to the
allocator can't break this rule.
Change-Id: Id4c90b60682cf5c8949cde25362d286625b3e953
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66719
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add option to resource allocator v4 that restores the top-down
allocation approach at the domain level.
This makes it easier to handle 64-bit resources natively. With
the top-down approach, resources that can be placed either above
or below 4G would be placed above, to save precious space below
the 4G boundary.
Change-Id: Iaf463d3e6b37d52e46761d8e210034fded58a8a4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
There's no reason to use camel case for EEPROM region names or local
variables. Use snake case for consistency with coreboot's code style.
Change-Id: Id1200a0c778095b109d824a1ca4e3e69591e4165
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Update generated FSP headers for Alder Lake N from v3267.01 to v3301.00.
Changes include:
- FspsUpd.h: 1. Add VccInAuxImonSlope UPD
2. Update UPD Offset in FspsUpd.h
BUG=b:242152105
BRANCH=None
TEST=Build using "emerge-nissa intel-adlnfsp"and boot Nissa.
Change-Id: I7b921e2aa467593a1c764fc554e2e83e8bb526e8
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67167
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Some devices require that several bytes are written with a single I2C
write command. Extend the i2c_bus interface functions and add both, read
and write for more than one byte at a defined byte offset.
Change-Id: I0eec2e1d4185170f02b4ab35aa6546dc69569303
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67098
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
For TPM2, vb2api_secdata_firmware_create() is already called from
setup_firmware_space() from _factory_initialize_tpm(). Therefore move
the duplicate call from factory_initialize_tpm() to TPM1's
_factory_initialize_tpm().
Change-Id: I892df65c847e1aeeabef8a7578bec743b639a127
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67219
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I684d374bd02a42e178383c26936e137e173f8f7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The lint script just did very basic argument parsing and required the
sub-command and --junit argument to be in specific locations. I'm
adding additional commands, so the first step is to add true command
line parsing.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7118c29e6c5d785b35a7ae12cf5984c43ebc3ab9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67191
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel platforms have soft straps stored in the SI_DESC FMAP section
which can alter boot behavior and may open up a security risk if they
can be modified by an attacker. This patch adds the SI_DESC region to
the list of ranges covered by GSC verification (CONFIG_VBOOT_GSCVD).
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I0f1b297e207d3c6152bf99ec5a5b0983f01b2d0b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66346
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CL:3825558 changes all vb2_digest and vb2_hash functions to take a new
hwcrypto_allowed argument, to potentially let them try to call the
vb2ex_hwcrypto API for hash calculation. This change will open hardware
crypto acceleration up to all hash calculations in coreboot (most
notably CBFS verification). As part of this change, the
vb2_digest_buffer() function has been removed, so replace existing
instances in coreboot with the newer vb2_hash_calculate() API.
Due to the circular dependency of these changes with vboot, this patch
also needs to update the vboot submodule:
Updating from commit id 18cb85b5:
2load_kernel.c: Expose load kernel as vb2_api
to commit id b827ddb9:
tests: Ensure auxfw sync runs after EC sync
This brings in 15 new commits.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I287d8dac3c49ad7ea3e18a015874ce8d610ec67e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66561
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
flashrom uses cmocka for unit testing. Install it so that the CI can
use it.
Change-Id: I5c168e480d6f4cbfbbd175ecb035c88bfcbac00b
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67272
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add additional DPTC parameter IDs that are necessary when throttling the
SOC due to low/no battery.
These additional parameters are used in later CLs.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Build nipperkin
TEST=Build skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I9e944d7c620414ec92d08a3d1173ba281d593ffc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67182
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
elog_gsmi_cb_mainboard_log_wake_source is called from SMI and causes
eSPI transactions. If the SMI interrupts an ongoing eSPI transaction
from the OS it will conflict and cause failures. Removing this call to
avoid conflicts. This can be re-enabled after refactoring
google_chromeec_get_mask to use ACPI MMIO.
This is a copy of CB:63280 but for skyrim.
BUG=b:227163985, b:243557044
TEST=suspend/resume skyrim and no longer see EC wake sources in elog.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Iac56840fe15101bc556d8cce9960f761c6ea7181
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67184
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Enable DSP setting. Make sure the SSP can work as expected.
BUG=b:243123156
TEST=Dev beep working on Rex.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I6ae28e414ac4ac33f596df57691c979eac5fe132
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67270
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Enabling Bus Master isn't required by the hardware, so we shouldn't
need to enable it at all. However, some payloads do not set this bit
before attempting DMA transfers, which results in functionality
failure. For example: in this case, unable to see the developer screen
in Depthcharge.
In the prior IA SoC platform, FSP/GFX PEIM does the BM enabling for
the IGD BAR resources but starting with the MTL platform, it fails
to do so resulting into inability to see the Pre-OS display.
BUG=b:243919230 ([Rex] Unable to see Pre-OS display although GFX
PEIM Display Init is successful during AP boot)
TEST=Able to see the developer screen with eDP/HDMI while booting
the Google/Rex.
Also, this change doesn't impact the previous platforms
(ADL, TGL, CML etc.) where the BM is default enabled.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9ad9eee8379b7ea1e50224e3fabb347e5f14c25b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Move devicetree.md from acpi/ to getting_started/. The devicetree has
nothing to do with ACPI and getting_started has the most similar
information about coreboot.
Change-Id: I873b293f036a9e3bcdc98135386f9158c645513c
Signed-off-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Select SYSTEM_TYPE_LAPTOP so the FADT PM profile is correctly set to
mobile (vs the default of desktop).
TEST=build/boot google/dewatt, run FWTS and verify FADT PM profile correct
Change-Id: I480fbe85782e2c63efa8d2212d503a47d8149ab9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
As part of investigating b/240690391 I noticed that we were missing
the daughter board ports. Not all SKUs have these ports connected,
but it doesn't hurt to have the extra ACPI nodes.
BUG=none
TEST=build
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Id6fc34acbfa30bc15e697043bf93bcf584256128
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66605
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Change-Id: Ic8e04ae043145a3633c0b8379a797724f95fd7ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Definition of FIRMWARE_LOCATION, POUND_SIGN, DEP_FILES,
amd_microcode_bins are moved to common Makefile.inc.
Change-Id: I5a0ea27002e09d0b879bafad37a5d418ddb4e644
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62658
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
A new ChromeOS automated test will be introduced to check the cbmem log
of diagnostic boot mode. Because the diagnostic boot does not allow
booting into kernel, the test must perform AP reset and then check the
cbmem log afterwards. However, the memory content might not be written
back to memory (from CPU cache) during AP reset because of the cache
snooping mechanism on x86. Hence, some API to flush cache is needed.
Implement dcache_* to allow flushing cache proactively in x86. To avoid
unnecessary flush, check dma_coherent before calling dcache_* functions,
which will be always true in x86. Therefore, this change won't affect
the original functionality.
BUG=b:190026346
TEST=FW_NAME=primus emerge-brya libpayload
Cq-Depend: chromium:3841252
Signed-off-by: Hsin-Te Yuan <yuanhsinte@google.com>
Change-Id: I622d8b1cc652cbe477954a900885d12e6494d94d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add the headers for 2.2.3.1, which includes the following changes
over 2.2.0.0:
• [Implemented]GLK: XHCLKGTEN Register setting causes S0ix entry
failure in less than 5 cycles when a USB2 Ethernet Dongle is
connected. Refer GLK BIOS Spec Volume1 CDI# 571118 under chapter
7.20.6 for new Register settings.
• [Implemented] [GLK/GLK-R] DDR4 16Gb SDP Memory support for Gemini
Lake/Gemini Lake – R
• [Update] MRC new version update to 1.38.
• [Fixed][GLK-R][WLAN] Removed the DSW function - Wake on LAN from
S4 issue with latest Wifi driver.
[Update] MRC new version update to 1.39. Included fix for
MinRefRate2xEnable and support for Rowhammer mitigation.
• [Fixed] Disable Dynamic DiffAmp and set CTLE from 7 to 5. This
change specific to DDR4 memory configuration.
• GLK Klocwork Fix
• [Update] MRC new version update to 1.40.
Added in a separate directory as the default. The 2.2.0.0 headers
were left and will be used for Google boards, as some offsets have
moved.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I09498368b116c2add816eeada2fa4d0dba6e5765
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64533
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Whilst UefiPayloadPkg is always built with support for 32-bit
and 64-bit, this is not the case for all edk2 targets. Move this
to the build command so they can be specified on each target.
Also add the `-s` switch, which stands for quiet to suppress edk2
printing War and Peace whilst building.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: If94abd4e28917718c76ad5945966e7be668c8f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66364
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename the update recipe, which updates the edk2 repository, to
$(EDK2_PATH). There is no functional change here.
This recipe must be phony so it runs every time.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I30fedbee7459b79a85a23678e0075368eda95da0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66363
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When cloning edk2, download the submodules at the same time. There is
no functional change here, just a minor speed improvement.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ieeb481346093588bd8d237857966001dc81460b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66362
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
First, remove the `-p` flag; as it's a file target it's not needed in
this case.
Second, remove the clone as this is handled in the update recipe.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I3829a3151be2d05a067a160fa770e5eb7ad4aad4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66361
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Convert UefiPayloadPkg (UEFIPAYLOAD.fd) to a file target.
There is no functional change here, it just avoids it being copied
out of the build dir, into an output directory and then into build.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Iff097f6f1e715c697c33c50c395d7c1b88cc6280
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66360
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Nvidia recommends saving and restoring the LTR Enable bit in PCIe config
space for the PCIe root port before/after GC6 entry. Also the detectable
error bit should be cleared, as there may be errors expected during the
GC6 flow.
BUG=b:214581763
TEST=no more correctable errors after GC6 entry/exit
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I058ce1b3f17fb6cc59785a85efaf9ea0504cf2ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
BUG=b:238937091
TEST=Dump SSDT on nereid and check that the wifi device contains the
DmaProperty. Also check that the kernel marks the device as untrusted.
Change-Id: I0725ea18d52420a3161d6fcfa3bcb72ebe35f3a5
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Select SOC_AMD_COMMON_BLOCK_ESPI_EXTENDED_DECODE_RANGES and remove the
TODO from SOC_AMD_COMMON_BLOCK_HAS_ESPI.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I90e3bf3f196e22b428b01ea0437c1224702d2b44
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Compile-time support of DPTC is controlled by
EC_ENABLE_AMD_DPTC_SUPPORT in each variant's ec.h file. This CL removes
EC_ENABLE_AMD_DPTC_SUPPORT and replaces it with the Kconfig value
SOC_AMD_COMMON_BLOCK_ACPI_DPTC.
Each variant's run-time support of DPTC continues to be controlled by
the variant's overridetree.cb "dptc_enable" value.
BRANCH=none
BUG=b:217911928
TEST=Build zork
TEST=Boot skyrim
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: Ic101e74bab88e20be0cb5aaf66e4349baa1432e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Pcie5_1 is added for DID 0xA72Dh and BDF 0/1/1.
References:
RaptorLake External Design Specification Volume 1 (640555)
BUG=b:229134437
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Id7440bf202d5560ff92807877d48b94054cb1de9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Chausie fails to boot without this option set. Enable in the mainboard
rather than the SoC Kconfig to not impact Skyrim.
TEST=boot to OS
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9f2a1be9eddb9e17407d00ff50ceb70a2718ce3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add support for loading SPM firmware from CBFS to SPM SRAM. SPM needs
its own firmware to enable SPM suspend/resume function which turns off
several resources such as DRAM/mainpll/26M clk when linux system
suspend.
SPM is an essential component on MediaTek SoC, so we initialize PPM
in soc_init(). For MT8188, SPM will handshake with DPM to do
initialization, so we need to call spm_init() after dpm_init().
This SPM flow adds 33ms to the boot time.
firmware log:
mtk_init_mcu: Loaded (and reset) spm_firmware.bin in 25 msecs
SPM: spm_init done in 33 msecs, spm pc = 0x400
TEST=spm pc is 0x400 which is in idle state.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I1a1f49383e0ceadc259a18272fc1c277b65406ae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some functions are the same in spm.c for MT8192, MT8195, MT8186 and
MT8188, so we move them to common/spm.c.
TEST=build pass.
BUG=b:236331724
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I29ddefc47d8bd156fa1ca0cedd4deaed676ae7e4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The unit of current_clk in pmif_ulposc_check() should be MHz. We use
pmif_get_ulposc_freq_mhz() to get the default hardware value in MHz.
Without this modification, the judgement in pmif_ulposc_check() is
alway wrong due to the wrong unit.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: I3bf80a23bb35ff657023eb4b7e009fa233f61244
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66971
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add basic DEVAPC (device access permission control) driver.
DEVAPC driver is used to set up bus fabric security and data protection
among hardwares. DEVAPC driver groups the master hardwares into
different domains and gives secure and non-secure property. The slave
hardware can configure different access permissions for different
domains via DEVAPC driver.
1. Initialize DEVAPC.
2. Set master domain and secure side band.
3. Set default permission.
TEST=check logs of DEVAPC ok.
BUG=b:236331724
Signed-off-by: Nina Wu <nina-cm.wu@mediatek.com>
Change-Id: Iad3569bc6f8ba032d478934ba839dc4b5387bafc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Some enums and functions are the same in DEVAPC driver for MT8195,
MT8186, and MT8188, so we move them to common folder.
TEST=build pass.
BUG=b:233720142
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Change-Id: Ia7d2145780780fd54b76952db96424b8ea477594
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I52548e544165b4732d9989da6455c8fd77bf99d3
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67185
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Change-Id: I80fccfa6d108b68d6f33a3d47766205b423a41ff
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67058
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add initialization of DPM drvier for DRAM low power mode.
DPM is an essential component on MediaTek SoC, so we initialize DPM
in soc_init().
This DPM flow adds 22ms to the boot time.
coreboot logs:
CBFS: Found 'dpm.dm' @0x156c0 size 0xfc in mcache @0xfffdd110
mtk_init_mcu: Loaded (and reset) dpm.dm in 6 msecs (422 bytes)
CBFS: Found 'dpm.pm' @0x15800 size 0x3c59 in mcache @0xfffdd140
mtk_init_mcu: Loaded (and reset) dpm.pm in 16 msecs (18910 bytes)
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I46baa7b49e90d53dd4d1d95af9c46622faf30419
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66969
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: Ia68aca1d1e8729739246157904727123e5d001e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66968
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
DPM is a hardware module for DRAM power management, which is used for
DRAM low power mode.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I872396fe2c5accd92ba5c14b124125bd58257771
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66967
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
MT8195 and MT8188 share the same dpm_4ch.c, so we move it to common
folder.
TEST=build pass
BUG=b:236331724
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I13406707d3b331ced57af62f4ba4f365e9ac4f84
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66966
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
It seems pass 1 and 2 were inconsistent. The first would account for
resources with a limit of 0 even though the second can't assign anything
for them.
Change-Id: I86fb8edc8d4b3c9310517e07f29f73a6b859a7c4
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65402
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fix EC_IN_RW config for Rex. Dauntless on Rex does not have an EC_IN_RW GPIO pin.
Port of commit 7f339c6050c5 ("mb/google/corsola: Correct EC-is-trusted logic")
BUG=b:243950850
TEST=Built and booted to Google Rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I97e5c752b4f36c9221137903f755837880f6b1c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67208
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This reverts commit 47fee08fc3a383e14dc974754d6e463fa320badf.
The required EC changes are now in place to revert this W/A that
disables the LID based shutdown.
BUG=b:243920003
TEST=No shutdown request has triggered while booting AP at
depthcharge.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I5ae56912f030f6f0e3cb49282bbffc920fb389c0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67206
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The headers added are generated as per FSP v3301.03
In the future, when Alder Lake and Raptor Lake fsp align, Raptor Lake
fsp headers can be deleted and Raptor Lake soc will also use headers
from alderlake/ folder.
BUG=b:243693364
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Selma Bensaid <selma.bensaid@intel.com>
Change-Id: Idbd39ed53d4ba05248a0e83c104846960253931e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
CB:66978 introduced an incorrect condition to check for the presence of
SPD binaries to be injected into APCB_SBR_D5.gen. This caused the SPDs
to be not injected into the APCB and hence the system fails to boot. Fix
it by updating the path of the SPD binaries correctly.
BUG=b:244173966
TEST=Build and boot to OS in Skyrim.
Change-Id: I5efa634fafdcc4769dfad5f533d5512e7c03644f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Visual Studio Code uses the directory .vscode/ to store data, so add it
to the .gitignore.
Signed-off-by: Tim Van Patten <timvp@google.com>
Change-Id: I8fe6439f01bd5ada8ceb814a22602db241aa11d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Ths new Method, GSCI, allows control over whether or not IRQs are routed
as SCI#s for the given GPIO.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ic61caaf77d2c6e295e67a1501544e8b8fc6f3b6a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66813
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Override bluetooth enable_delay_ms to 10ms, per advise from vendor.
BUG=b:233369179
BRANCH=guybrush
TEST=Boot nipperkin, connect to headset, suspend and reboot,
headset still functions.
Change-Id: Ic00de6704018f27339512929f85531aa72205b0e
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67177
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Set bluetooth enable_delay_ms to 200ms. 200ms is the lowest common
denominator between the two BT chipsets.
BUG=b:233369179,b:236289478
BRANCH=guybrush
TEST=Connect to headset, suspend and reboot, headset still functions
Change-Id: Id4c23de37351d28d02aaa797fa19ff49e9dfa76c
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65180
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
IMHO, using bitfields directly in the Field declaration makes the ASL
code more readable then directly manipulating the entire 32-bit dword.
TEST=ACPI code using several of these Methods still works
(google/agah dGPU ACPI code)
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: I9909700022d8b55db3f5208010bdff11ddaf4e7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66812
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Added DPTF passive, critical, active policies for Nirwen.
Added additional TSR for Nivviks and updated the PL2 time window
Ref: EDS doc#645550
BUG=b:238713292
TEST= Boot to OS and verify dptf policies are set based on fw_config.
Signed-off-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com>
Change-Id: Iae46736d8d7723a20983dcaad42a7007d76cfad8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: V Sowmya <v.sowmya@intel.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
This change adds support to configure the DPTF policies based
on the fw_config THERMAL_SOLUTION.
BUG=b:238713292
TEST=Boot to OS and verify that dptf policies are set based on
fw_config.
Signed-off-by: V Sowmya <v.sowmya@intel.com>
Change-Id: I0ffb9d7cc6c963add001a31ba23a6d6c351dd621
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
The current subsystem ID used by the amps may end up getting used
again for future products, therefore this CL updates the subsystem
ID to 103C8C08, which was specifically generated for this amp.
BUG=b:202484541
BRANCH=brya
TEST='FW_NAME=vell emerge-brya coreboot'
Change-Id: I399d8d99ead4fb6fdfa24c2a7a3e3d5e63603b8b
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67014
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update memory and RAMID table
BRANCH=None
BUG=b:243337816
TEST= emerge-coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: Iec3c2098be86661249b1786a02f0768f9d8ad0ff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
This patch adds support for MDN platform to the spd_tools.
This change replaces SBR with MDN.
BUG=b:243337816
TEST=Able to generate SPD for LP5 DRAM part.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: If099af36de8a64e96fbfde32eaf15990f4b330c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
|
|
Update K3KL8L80CM-MGCT, K3KL9L90CM-MGCT,H58G66AK6BX070 support
BRANCH=None
BUG=b:243337816
TEST= SPD add
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I2c370fbd007c22b1f94074d9f16e5bc7c4e04848
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67104
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
|
|
To match byra commit 7c2514fc072f95eed6483518811fb6c39f780f5b (mb/google/brya: Change GPP_F17 programming), update A17 pad
configuration to the APIC only.
TEST=Verified booting to OS on Google/Rex.
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: Ie9f071dc4a2755dd1f396e2afe730ead66bb1dd0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67183
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The CPPC table value for UEFI BIOS has been changed. The code has been
merged to AGESA. We can get the value by dumping ACPI table. Then we
align the coreboot code with the new value.
BUG=b:190420984
Change-Id: I091ab3bbc5f94961f8b366a3fa00f50f5c9fa182
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
BUG=b:238937091
TEST=Dump the SSDT on nivviks and check that the wifi device has the
DmaProperty.
Change-Id: I910b7da7050f9aebfe0eb58552c82b1b29de3772
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Change-Id: I4c57c9bade318d54315f9692cd37edb694e33aa9
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58320
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 0e7cf3d81d121181a94b6a594b944628c2e5a939 (soc/intel/alderlake:
Fix DDR5 channel mapping) fixed a bug in SoC code that messed up DDR5
SPD address mapping. Atlas uses the 0x50/0x52 addresses. However, the
SoC code bug required commit 044883615d4471b7a0b883eb8b8224d95faf52af
(mb/prodrive/atlas: Update correct SPD address) so that at least some
RAM would work. Now that the SoC code bug is fixed, the workaround is
no longer needed, so use the correct SPD address mapping.
TEST=Boot Atlas and verify that both memory channels work
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: I352d8f36eec63cffd3f63ab6e7421db16ca30163
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Building futility with OpenSSL 3.0 (default in latest Debian sid)
results in a number of warnings that various declarations have been
deprecated. Since we (and futility) have warnings as errors enabled,
this causes the building of futility to fail, killing the entire
coreboot build.
To work around this until futility is updated, turn off the warnings
about deprecated declarations.
Bug 243994708 has been filed to get futility updated. This workaround
can be removed when futility builds cleanly with the latest libsssl-dev.
BUG=b:243994708
TEST=Futility build doesn't fail with libssl-dev > 3.0
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I54e27e09b0d50530709864672afe35c59c76f06e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tom Hiller <thrilleratplay@gmail.com>
|
|
Part of the content was on the same line as the heading.
Change-Id: Ia19487d80e9f004d59f96ff09e1f3de4f37c2f77
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67000
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Rename pcie5 alias as pcie5_0 since raptorlake is adding a new pcie5 RC.
BRANCH=firmware-brya-14505.B
TEST=none
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iee669e68e3607b7ffec9f0800e9f0a916defd498
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67107
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The size of the input parameter to RESET_SYSTEM svc call is expected to
be 4 bytes. Fix the reset_system type from enum to uint32_t.
BUG=b:243476183
TEST=Build and boot to OS in Skyrim with PSP verstage. Trigger a system
reset to ensure that the system is reset successfully.
Change-Id: I6319a1dfc89602722c1c2b1c4ee744493ae8b33f
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67117
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If we have a PCIe root port without `ops_pci` or without
`get_ltr_max_latencies`, the parent device wouldn't be PCI.
Hence, check for a PCI path early.
Change-Id: I358cb6756750bb10d0a23ab7133b917bfa25988b
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This workaround was added since reading the firmware version on Ti50
versions < 0.0.15 will cause the Ti50 to become unresponsive. No one is
using Ti50 this old anymore, so remove the workaround.
BUG=b:224650720,b:236911319
TEST=Boot to OS on nivviks with Ti50 0.22.4. Check the log contains the
firmware version:
[INFO ] Firmware version: Ti50/D3C1 RO_B:0.0.26/- RW_B:0.22.4/ti50_common:v095c
Change-Id: I3628b799e436a80d0512dabd356c4b2566ed600a
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67138
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
