| Age | Commit message (Collapse) | Author |
|---|
|
Instead of having the what-jenkins-does target clean up before building,
have it call the test_cleanup target.
Clean the tegra targets.
Remove distclean from test_cleanup target - I don't think that's
expected, and people might be upset by having their .config deleted.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia9d585df05343365c89e49b1c01dba9ba865003f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
CBFS_MCACHE is currently experiencing overflow with CBFS verification
enabled. Reduce the pre-x86 cbmem console size from ~5.5 KiB to 4 KiB.
This reduction along with the available free space in PSP shared buffer
(32 KiB) helps to increase the CBFS_MCACHE size from 8 KiB to required
14 KiB.
BUG=b:259342909
TEST=Build and boot to OS in Skyrim. Ensure that there are no CBFS
mcache overflows.
FMAP: area COREBOOT found @ 80a000 (8347648 bytes)
VB2:vb2_digest_init() 0 bytes, hash algo 2, HW acceleration unsupported
CBFS: mcache @0x00019a40 built for 67 files, used 0x19a0 of 0x1c00 bytes
CBFS: Found 'apu/amdfw_a' @0x0 size 0x3ff80 in mcache @0x0001b640
VB2:vb2_digest_init() 262016 bytes, hash algo 2, HW acceleration enabled
Ensure that firmware_CbfsMcache FAFT test is successful.
Change-Id: I35e1a8c6d73e0870b6a43aac604f83a0b6c3aabe
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69827
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Remove SSE when SSE is already selected by supported CPUs.
Add "config SOCKET_SPECIFIC_OPTIONS" section to socket_p/Kconfig.
Change-Id: If2265ac716e90720e7ccc550239737d40c2f7a0a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69447
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
If no boards are tested by abuild, an error is currently shown because
no boards failed, but no boards passed either. Account for this
possibility.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I097d3c728ca1acc652d5a1b7b49e57d01b0e513b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69520
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Iab76316f345fb0cf2ca2a3eaf40f64a1f1b7fc13
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69814
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
VB2_FIRMWARE_WORKBUF_RECOMMENDED_SIZE is nowadays defined in
vboot/firmware/2lib/include/2constants.h, so update the comment.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia7c9a5476ae06d4bac762da1729aff878b7d0965
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69797
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The patch parses CPU and PCH Trace Hub modes from the debug area in the
Descriptor Region. The modes can be updated in the debug area in order
to configure the CPU and PCH Trace Hub modes. The debug area's offset
starts from the SPI Flash offset:0xf00.
For runtime debugging, the OEM Section in the Descriptor Region is being
used as debug area. The OEM Section details are documented in the SPI
Programmer Guide of CSE Lite kit.
TEST=Build code for Gimble
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I61241c5c1981ddc4b21581bb3ed9f531da5f41b2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64437
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
field STORAGE 30 31
option STORAGE_UNKNOWN 0
option STORAGE_NVME 1
option STORAGE_UFS 2
end
BUG=b:254365935
TEST=emerge-brya coreboot.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I17f8a852808d279a1f2b08b364cd4e525a807560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69786
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
One register configuring multi-pin functions was outside of the Global
Configuration Registers space and skipped in the initial port patches.
Replicate the vendor configuration and set the Super I/O pin for PECI
functionality.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I90f142a1a9ee27dd061fc71b791bd4c7df97da6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68711
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add pcie_find_dsn() to detect and match PCIe device serial
number. In addition, vendor ID is matched when provided.
Change-Id: I54b6dc42c8da47cd7b4447ab23a6a21562c7618
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
Add initial CEDT (CXL Early Discovery Table) support based on
CXL spec 2.0 section 9.14.1.
Add functions to create CEDT table (revision 1), and create CEDT
CXL Host Bridge Structure (CHBS) and CXL Fixed Memory Windows
Structure (CFMWS).
TESTED=Create CEDT table on Intel Archer City CRB, dumped the
CEDT table and examined the content.
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: I4fbce78efc86ad9f2468c37b4827a6dadbdc6802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64263
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
|
|
The change being reverted [1] caused all the Kconfig dependency files
to be generated at the top level of coreboot's build directory.
This reverts that behavior and puts the dependencies back where we're
used to them being.
[1] https://web.archive.org/web/20220316120807/https://github.com/torvalds/linux/commit/1b9e740a81f91ae338b29ed70455719804957b80
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic4b48831705c3206e7c2e09f01d072d1cde9c9c4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69535
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Id229fb22d20c489db3dd7a59f29e7ac10174fd85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
There is a note about the default I2C speed of this being 400 kHz
despite the logic in rx6110sa.c sets the fallback (correctly) to
100 kHz.
This information originally comes from the fact the dw_i2c bus
controller default speed is 400 kHz. This is irrelevant to
the default speed of this device as it can be used with any
bus controller.
BUG=none
TEST=coreboot builds correctly (no functional changes).
Change-Id: Ic0ffe5667574c59e1c1df952b84b8a3680b53341
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69545
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This commit doesn't add any new format options, just makes selecting
existing format explicit.
Ticket: https://ticket.coreboot.org/issues/422
Change-Id: I3903aff54e01093bc9ea75862bbf5989cc6e6c55
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68746
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This change enables the DisplayPort detection at preboot for Rex board.
BUG=b:247670186
TEST=Built image and validated DisplayPort feature at preboot on Rex.
Change-Id: I1a8a13e937c7132696aa39d85c3c6b6fb2dd13a5
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67742
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
After DisplayPort is plugged into type-C port, its hpd signal
instantly presents and EC has mux_info for dp and hpd. This change
fixes the DP detection flow to avoid the 1 second delay while no DP
is connected. If DP is present, there will be requests towards PMC
through the sequence of connect, safe mode, dp and hpd mode.
BUG=b:247670186
TEST=Built image and validated the DisplayPort preboot feature on Rex.
Change-Id: I7cb95ec7fcc7e1a86e86466e6d45390eedcc4531
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69694
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Update definitions on glinda used by birman.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I03065011581489b5345c16e225edc341e1d7811c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69706
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update definitions to match morgana FSP.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: Ic893526789c05a298965702114d4a814466a5742
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
EC_HOST_EVENT_USB_CHARGER is no longer defined by the EC, so remove all
references.
BUG=b:216485035,b:258126464
BRANCH=none
TEST=none
Change-Id: I9e3e0e9b45385766343489ae2d8fc43fb0954923
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:235919755
Test=Check error message "Exposing GPIOs in Power Resource and _CRS"
not show in firmware log.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I21a47adde48555098d041b94d483cad308bdb717
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Set `EnableTcoTimer=1` in order to keep FSP from
1) enabling ACPI Timer emulation in uCode.
2) disabling the PM ACPI Timer.
Both actions are now done in coreboot.
`EnableTcoTimer=1` makes FSP skip these steps in any possible case
including `SkipMpInit=0`, `SkipMpInit=1`, use of the MP PPI or FSP
Multiphase Init. This way full control is left to coreboot.
Port of commit 0e905801f8ff ("soc/intel: transition full control over PM
Timer from FSP to coreboot").
NOTE: This will have a huge power impact when it's enabled. If TCO timer
is disabled, uCode ACPI timer emulation must be enabled, and WDAT table
must not be exposed to the OS.
BUG=none
TEST=Boot to OS on google/rex.
Excerpt from google/rex coreboot log:
[SPEW ] EnableTcoTimer = 1
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I2693f0390e6c9fa92fec366ab87589c3bcea9027
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch deselects `USE_PM_ACPI_TIMER` kconfig to ensure that
ACPI PM timer remains disabled.
The PM timer (by PMC IP) consumes more power and blocks S0ix so the
timer is emulated by ucode to save power and unblock S0ix.
TEST=Able to boot Google, Rex and ensure PMC MMIO register 0x18fc
BIT 1 is set.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2a23b417ff7fb6328323380a7df46b4b397fc8eb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69685
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
BUG=b:231291430
TEST=See STB Spill-to-DRAM enabled
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib60b7fc2ba85c7a8025c9f8c6495e94049499f56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69707
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The coreboot build system automatically adds a `config` file to CBFS
that lists the exact Kconfig configuration that this image was built
with. This is useful to reproduce a build after the fact or to check
whether support for a specific feature is enabled in the image.
However, the file is currently generated using the `savedefconfig`
command to Kconfig, which generates the minimal .config file that is
needed to produce the required config in a coreboot build. This is fine
for reproduction, but bad when you want to check if a certain config was
enabled, since many configs get enabled by default or pulled in through
another config's `select` statement and thus don't show up in the
defconfig.
This patch tries to fix that second use case by instead including the
full .config instead. In order to save some space, we can remove all
comments (e.g. `# CONFIG_XXX is not set`) from the file, which still
makes it easy to test for a specific config (if it's in the file you can
extract the right value, if not you can assume it was set to `n`). We
can also LZMA compress it since this file is never read by firmware
itself and only intended for later re-extraction via cbfstool, which
always has LZMA support included.
On a sample Trogdor device the existing (uncompressed) `config` file
takes up 519 bytes in CBFS, whereas the new (compressed) file after this
patch will take up 1832 bytes -- still a small amount that should
hopefully not break the bank for anyone.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Set the logging message prefix to the device name instead of the
device path in order to make the output consistent with other
logging messages in this and other drivers.
Change-Id: Ib63b93d52aad220d17f1f4ee0d47a949933ec26d
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69718
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
device
Instead of creating a dummy I2C device in order to force Linux to
decrease the I2C bus speed, use the own 'bus_speed' field of RV3028
device config structure.
Linux should always set the bus speed to the speed of the slowest
device sitting on the bus. Hence the dummy device is not needed
here anymore.
BUG=none
TEST=See if the RV3028 RTC is visible and working (date/time can
be set/read) in Linux. At the time, a driver modification is needed
to add a match table for the "MCRY3028" ACPI HID. A proper kernel
patch is pending.
Change-Id: I6e269dc67d1fe2a6747fcf3bee224def7b553f08
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69544
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Add ACPI generation callback to the driver after obtaining the
ACPI HID "MCRY3028" for this device from Microcrystal AG (VID: "MCRY").
Also add I2C bus speed field to the device config structure, which
is a required ACPI entry.
BUG=none
TEST=Disassemble the SSDT table and see whether the device entry
"MC28" is generated correctly. Also check whether the RV3028 driver
in Linux (drivers/rtc/rtc-rv-3028.c) is bound correctly after adding
an ACPI match table to it containing the HID. A proper kernel patch
is pending.
Change-Id: I3b8cf5c8dc551439755992ff05b6693e91cc3f21
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69543
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
It is no longer necessary to explicitly add "Warning" in front of
BIOS_WARNING message.
Change-Id: I6e4341555a3b03a531bd94ba5e36cbcadda9c663
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69624
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Get rid of a lot of casts.
Change-Id: I93645ef5dd270905ce421e68e342aff4c331eae6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69078
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
Update acpigen_write_alib_dptc() to support extra 5 thermal profiles.
User can use these profiles for dynamic thermal table switching support.
BUG=b:232946420
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I9e6d5c0fc6f492340c935899920d9ee7c9396256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68470
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Issue:
Device can't wake up using power key.
Root cause and solution:
EINT event mask register is used to mask EINT wakeup sources. All
wakeup sources are masked by default. So we add a driver here to unmask
all wakeup sources.
BUG=none
TEST=wake the device up by power key on MT8188 EVB.
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Change-Id: I94b20909b0b8d77f75c41bc745f892baded7a54b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69688
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
On Herobrine, we will determine if we have an NVMe device based on SKU
id. Basically, if bit 0 is 2 (or Z), then we know that we have an
NVMe device and thus will need to go through PCIe initialization.
Otherwise, we know that we are booting an eMMC device.
BUG=b:254281839
BRANCH=None
TEST=build firmware image and boot and make sure we can boot up Tested
on villager, which does not have NVMe and made sure that it boots
still. Check cbmem dump to make sure that device configuration
entry is still low since it's not initializing PCIe devices:
40:device configuration 730,203 (1,295)
Change-Id: I1fa0ad392ba6320fdbab54b3b5dc83ac28cd20ba
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69690
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Implement mainboard_needs_pcie_init() for herobrine in order to
determine if we need to initialize the pcie links. When the SKU id is
unknown or unprovisioned (for example at the beginning of the factory
flow), we should still initialize PCIe. Otherwise the devices with
NVMe will fail to boot.
BUG=b:254281839
BRANCH=None
TEST=emerge-herobrine coreboot
Change-Id: I8972424f0c5d082165c185ab52a638e8b134064c
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69689
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add Meteor Lake MCH device ID 0x7d15.
TEST=Build and verify boot on MTL RVP
With patch, coreboot log:
`[DEBUG] MCH: device id 7d15 (rev 00) is Meteorlake P`
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: If46b01910239173cd74bf6eebc69a81291b6e15a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69560
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Modify the chromeos FMD file for nissa variants to redistribute the
buffer in SI_ME region obtained due to CSE size optimizations to SI_BIOS
region.
1. Modify SI_ALL region size to 3712K. SI_DESC remains at 4K and SI_ME
is 3708K.
2. Modify SI_BIOS region to 12672K. This results in an addition of 32K
buffer each to FW_MAIN_A/B regions.
BUG=b:228936671
BRANCH=firmware-nissa-15217.B
TEST=Verify CSE FW update with new FMD and ME RW blobs on craask.
Cq-Depend: chrome-internal:5094491
Change-Id: I5ead2f81850a2aa79e677c7f271db672e235750a
Signed-off-by: Krishna P Bhat D <krishna.p.bhat.d@intel.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
+-----------+-------+-------+---------+-------------+----------+
| Setting | AC LL | DC LL | ICC MAX | TDC Current | TDC Time |
| |(mOhms)|(mOhms)| (A) | (A) | (msec) |
+-----------+-------+-------+---------+-------------+----------+
| IA | 2.8 | 2.8 | 80 | 43 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
| GT | 3.2 | 3.2 | 40 | 23 | 28000 |
+-----------+-------+-------+---------+-------------+----------+
- IA TDC current from 20A to 43A.
- GT TDC current from 20A to 23A.
BUG=b:256754175
TEST=Build test image and use PTAT to check IA and GT value
Signed-off-by: Johnny Li <johnny_li@wistron.corp-partner.google.com>
Change-Id: Ife36655f077bae567bff3c3e33f779c990cf5ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69135
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Yang <paul.f.yang@intel.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
No boards now have a missing dependency so remove the workaround.
Change-Id: I787f6aa588175ba620a068918c42edc9d257c3ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69514
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
revert commit 1b9e740a8 (kconfig: fix failing to generate auto.conf) [1]
The above change caused all of the enabled kconfig options to be written
into the top level build directory. We don't want that, so go back to
the old behavior for the coreboot tree.
[1] https://web.archive.org/web/20220316120807/https://github.com/torvalds/linux/commit/1b9e740a81f91ae338b29ed70455719804957b80
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2904f69a5d85337ad0a6b48590ccd4b4a6e38b70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Calling setup_ioapic() was only correct for the
IOAPIC routing GSI 0..15 that mimic legacy PIC IRQs.
Change-Id: Ifdacc61b72f461ec6bea334fa06651c09a9695d6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55571
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
_PRS only makes sense if _SRS is implemented.
Change-Id: I030bd716215b5ac5738e00ebf6ed991d9d6c5ca0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69513
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Simply return the current resource settings in the _PRS method. This
means that coreboot has to correctly set up the resources on the
device. This won't result in any regression as without _PRS the ACPI
OS would not know what resources settings are valid, so it would never
use _SRS.
Change-Id: I2726714cbe076fc7c772c06883d8551400ff2baa
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64218
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Read FRU product info of PSU to get Type 39 required information.
Further development needed if multi-record info of PSU FRU is required.
For now, the read_fru_areas() only read product chassis and board info.
Signed-off-by: lichenchen.carl <lichenchen.carl@bytedance.com>
Signed-off-by: ziang <ziang.wang@intel.com>
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Change-Id: I18d056cba1a79b0775c8a42b3a879e819887adca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuming Chu (Shuming) <s1218944@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Christian Walter <christian.walter@9elements.com>
|
|
This patch adds unique device-locators, bank-locators and
asset-tags to the smbios type17 tables by making use of a
DIMMs controller-ID. This way we avoid name clashes when,
for example, two DIMMs share the same channel-ID and DIMM-ID
but have a distinct controller-ID.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I8aef79faa43f2475485f581c675ee152e580f678
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The dimm_info structure (defined in src/include/memory_info.h)
currently does not hold information about the DIMM's
node/controller ID.
This patch extends the dimm_info structure by adding a new field for
the node ID, called node_num. Also, adapt the dimm_info_fill()
function accordingly to populate the newly-added field.
Background: These changes are necessary for the Atlas mainboard, where
we are currently experiencing issues with the DIMMs device/bank
locator. Our 2 DIMMs share the same CHANNEL and DIMM ID but have a
distinct NODE ID. By looking at the smbios table we see
Channel-0-DIMM-0 for both DIMMs. Thus, we need their NODE IDs in order
to distinguish them.
This patch was tested by building and booting for the Alderlake-P
RVP board, which has the same DIMM slot configuration as the
Prodrive Atlas mainboard.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: I6ffa5bdff0ba0e3c4a4a51f2419291fd1278cd68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68525
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update touchscreen setting.
Change hid as panel team request to fix touchscreen with no function.
The panel team verification result is on b/251378772 comment#17.
BUG=b:251378772
TEST=Build/boot ChromeOS on winterhold, ensure touchscreen is
functional.
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I07d446111b1c18bfe15d00b6eacff23382cd461a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69674
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Change-Id: I0897acddd00bad89a5fd784f82380ed0d0d2c06e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69703
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I58ff31ab98c4310478cf3bbe8aecce4000ac8205
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69717
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Make use of deterministic cache helper functions from Meteor Lake
SoC code to print useful information during boot as below:
Cache: Level 3: Associativity = 12 Partitions = 1 Line Size = 64
Sets = 32768
Cache size = 24 MiB
Port of commit 55f5410fcd78 ("soc/intel/alderlake: Implement report_cache_info() function")
BUG=none
TEST=Build and Boot verified on google/rex
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I561658c8da0136d6c3d9578f22f5d320e542457d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69681
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: Ife134ef6d508113e3cd27b6352ee5044aee43744
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69677
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I4baa2e06d336736caf5505a05ed4353bcbfdb517
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69670
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
None of the touchscreens (over I2C) used in the rex program requires
exporting GPIOs in the ACPI _CRS method.
This can cause i2c devices to malfunction or cause timing
sequence violations if ACPI exports a PowerResource for the
device that uses GPIOs that are also exported in _CRS.
BUG=none
TEST=Able to build and boot Google, Rex platform.
Without this patch:
[ERROR] I2C: 00:10: Exposing GPIOs in Power Resource and _CRS
With this patch:
None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I578a60eff27f94d6dc94b900604bc7560337d60b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69612
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tune timing between power on and reset on SD device RTD3.
BUG=b:250746988
TEST=Use the value to boot on Pujjo successfully.
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I1ea77ec8381000249229653f1c0b9044bdf7866d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
It is no longer necessary to explicitly add "CRIT: " in front of
BIOS_CRIT message.
Change-Id: I506c1d278960c91d1283e9b1936c9c1678a10e17
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
It is no longer necessary to explicitly add "ERROR: " in front of
BIOS_ERR message.
Change-Id: I36e2785ae567d82339212140c1bde0876dfd450d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69622
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I43e6b57477cb4fd2c8ab399e9cc74591b0a44684
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Id50ebecdaddcce426b15d535afcc3e755f2c5a35
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I713b3fed3fc6d55139badec93a67943dd93ced2a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69333
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
default SOC_INTEL_COMMON_BLOCK_SGX_PRMRR_SIZE value is missing by
accident for SOC_INTEL_COMMON_BLOCK_SGX_PRMRR_SIZE_32MB.
Change-Id: Ib3af0a1c509ab2e2eccf3e36ff604a1040995af4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69332
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
It is no longer necessary to explicitly add "Warning" in front of
BIOS_WARNING message.
Change-Id: If1645180dd98ff5a1661fd568554de5831ef237e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69623
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As per Intel doc #627331 Section 3.6.1 "Intel CSME Production Machine
Determination", from ADL onwards there are three criteria which
determine whether a device is in production mode:
1. Fuses are programmed
2. SPI descriptor is locked
3. Manufacturing variables are locked
When logging whether the device is in manufacturing mode, 1 and 2 are
already checked. Add a check for 3 as well.
Also add logs for each individual criteria so it's easy to tell why the
overall Manufacturing Mode is set or not.
BUG=b:255462682
TEST=On a nivviks which has not gone through EOM:
Before:
[DEBUG] ME: Manufacturing Mode : YES
[DEBUG] ME: SPI Protection Mode Enabled : NO
After:
[DEBUG] ME: Manufacturing Mode : YES
[DEBUG] ME: SPI Protection Mode Enabled : NO
[DEBUG] ME: FPFs Committed : NO
[DEBUG] ME: Manufacturing Vars Locked : NO
On an anahera which has gone through EOM:
Before:
[DEBUG] ME: Manufacturing Mode : NO
[DEBUG] ME: SPI Protection Mode Enabled : YES
After:
[DEBUG] ME: Manufacturing Mode : NO
[DEBUG] ME: SPI Protection Mode Enabled : YES
[DEBUG] ME: FPFs Committed : YES
[DEBUG] ME: Manufacturing Vars Locked : YES
Change-Id: Iac605baa291ab5cc5f28464006f4828c12c748fe
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69324
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Alder Lake CSME HFSTS registers definitions as per Intel
doc #627331 revision 1.0.0, section 3.4.8.
Follow up CLs will use the bit definitions for performing
various checks.
TEST=build and boot nivviks platform
Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Change-Id: I9aeee7a3b41ad59c03391207930a253ffff19ae5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69286
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 9bbc039c457774dbeb44ea37ecc6507144d49b61 ("soc/intel/skylake:
Hook up FSP hyper-threading setting to option API") already hooks up
the `hyper_threading` CMOS option in SoC code, so there's no need to
do it from mainboard code.
Change-Id: I602452266a8465cced12454f800ea023f382ba6f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69522
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The `hyper_threading` CMOS option was hooked up to the wrong enumeration
and lacked a default value in `cmos.default`. Thus, use the correct enum
for the `hyper_threading` option, remove the now-unused "backwards" enum
and provide a default value in `cmos.default`.
Change-Id: I2ee9ced2881ed5e348e84a35e8abd6b7a363d936
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69491
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the implementation more similar to i82801gx, enabling
ACPI PM and GPIO register spaces already in bootblock.
Change-Id: I41ad8622801dbbadafdc37359d521eed42256e63
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69671
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When ACPI GPE0 block was extended to 64 events or 8 bytes,
ACPI PM register space was slightly modified. After
adjustment, PM2_CNT register moved to 0x50 where register
SS_CNT was previously defined to be.
For platforms that have a valid use for PM2_CNT==0x50 in
their FADT, remove overlapping definition of SS_CNT.
On i82801dx/gx ACPI GPE0 supports 32 events, reset_gpe0_status()
incorrectly addressed also GPE0_EN register. For a bit cleaner
implementation, define GPE0_HAS_64_EVENTS.
Change-Id: Iec83e9010146ebd487a61f542ac5c6f4c6a60833
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
We have equivalent southbridge_smi_set_eos().
Change-Id: I03a48f0ec9efac2a220aa4ca502a5f504d78c585
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I6d8efe783e6cc5413c3fd0583574a075a2c3876b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69667
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
If TSEG is not enabled, smm_region() should not reserve the region, so
add a test for T_EN flag in ESMRAMC.
For the SMM_ASEG case this moves CBMEM immediately below top-of-ram.
Change-Id: I2da4b846d0767afe00e98fdee375914c1875ddf5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69666
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch changes the UPD EnableMultiPhaseSiliconInit to enable the
Meteor Lake FSP multiphase flow.
BUG=b:247670186
TEST=Able to build and boot Google, Rex with MultiPhaseSiInit Enable.
[SPEW ] Executing Phase 1 of FspMultiPhaseSiInit
[DEBUG] FSP MultiPhaseSiInit src/soc/intel/meteorlake/
fsp_params.c/platform_fsp_multi_phase_init_cb called
[DEBUG] port C0 DISC req: usage 1 usb3 1 usb2 2
[DEBUG] Raw Buffer output 0 00000211
[DEBUG] Raw Buffer output 1 00000000
[DEBUG] pmc_send_ipc_cmd succeeded
[DEBUG] port C1 DISC req: usage 1 usb3 3 usb2 4
[DEBUG] Raw Buffer output 0 00000431
[DEBUG] Raw Buffer output 1 00000000
[DEBUG] pmc_send_ipc_cmd succeeded
Change-Id: I759c0ecee29c07bae4abe6b56d015e7253bd49fe
Signed-off-by: zhaojohn <john.zhao@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67741
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This reverts commit d164feb72602da958b644643b44e754f04a1f281.
Reason for revert: Herobrine program decided that we wanted
to be able to boot from NVMe if one exists.
Change-Id: I2d3217c514734608e2ff049b620f4c7acf86de89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69720
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 1b07797a7b79ea6c11421b61b9cf14b92cb91c66.
Reason for revert: Herobrine program decided that we wanted
to be able to boot from NVMe if one exists.
Change-Id: If675947026095d16b72bdb0f3ec790e583523465
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69719
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ALC5682-VS/ALC5682-VD use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682I-VS: _HID = "RTL5682"
ALC5682-VD: _HID = "10EC5682"
BUG=b:246491349
TEST=ALC5682-VD/ALC5682-VS audio codec can work.
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Change-Id: I60d5e0af7e2dabd134c8059eaeac388d40ac2073
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69607
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
As per Intel doc #729124 Section 3.6.1 "Intel CSME Production Machine
Determination", from ADL onwards there are three criteria which
determine whether a device is in production mode:
1. Fuses are programmed
2. SPI descriptor is locked
3. Manufacturing variables are locked
When logging whether the device is in manufacturing mode, #1 and #2 are
already checked. Add a check for #3 as well.
TEST=Build and boot MTL RVP
Snippet from coreboot log:
[DEBUG] ME: Manufacturing Mode : YES
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: I495a7d8730716fc92e8c57b2caef73e8bb44d30b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
The patch updates HFSTS4, HFSTS5 & HFSTS6 register definitions as per
MTL Intel CSME BIOS Specification (doc# 729124). Also, the patch logs
the firmware status details as per the new register definition.
TEST=Build and boot the coreboot on Rex
Snippet from coreboot log with the patch:
[DEBUG] ME: CPU Debug Disabled : NO
[DEBUG] ME: TXT Support : NO
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Change-Id: Ibee9a0955efc22ea0d9fdbba2d09e57d8851e22e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69577
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Hide these ACPI device so Windows does not warn about missing device
drivers.
Port of commit 907c85ad48dd ("soc/intel/alderlake: Hide PMC and IOM
devices").
BUG=none
TEST=Verified _STA method from ACPI tables in OS. USB-C drive is
detected in OS.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic62172bee9120d260a3cd60770ef780cb7dce860
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69576
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update header files for FSP for Meteor Lake platform to
version 2404_00, previous version being 2364_00.
FSPM:
1. Address offset changes
2. Rename `PlatformDebugConsent` to `PlatformDebugOption`
FSPS:
1. Address offset changes
Additionally, incorporate the UPD name change for MTL romstage.
BUG=b:255481471
TEST=Able to build and boot Google, Rex to ChromeOS.
Signed-off-by: vjadeja-intel <vikrant.l.jadeja@intel.com>
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I63ef4ecb6569141542a3b9bf4ee8cbcd2946582e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69182
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Enable ISH driver and set firmware name as "adl_ish_lite.bin"
BUG=b:242291814
TEST=boot into kernel, and check dmesg
"ISH firmware intel/adl_ish_lite.bin loaded"
Change-Id: I4badabba1a0cfceb77fc91f21953496152f19615
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69606
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove TODO comments after reviwing against morgana ppr #57396, rev 1.52
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I598daf40a774ec81a956ce8c1aeb1cbbf4b475f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69275
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Testing for the presence of intel-sec-tools doesn't need to happen
inside the what-jenkins-does target.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I6faa5bd5292ac5cceba9a64fe81939c0e25b9f3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69519
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Add power limits for the RPL SKUs of Agah.
BUG=b:258432915
TEST=build and boot ADL based Agah. RPL based testing
when hardware becomes available.
Change-Id: Ie97a9d14f1ee6f65225b7d26e25ff3d902fddc7f
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69419
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
ELAN updated the datasheet, the HID/I2C protocol's T3 delay
time is 150ms now. Modify the volmar's delay time to follow
the requiremnet.
BUG=b:257073343
TEST=Build firmware and measure the T3 timing of resume
and boot up on volmar DUT.
Run Suspend/Resume with UI test and got pass.
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Change-Id: I40a30ed567cd676d0a9373527d93fe51f89d39e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69559
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Change-Id: I64e5f5ee59859564c31ebb6f73b91d3d36be7d77
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69526
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Idca56583c1c8dc41ad11d915ec3e8be781fb4e48
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Clang isn't working so well with the ARM code yet. This is still
breaking builders after fixing the compiler warnings.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I2653edae0b89f75ef7d06a1be523585ff66a3b89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69701
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I417bb151afcb3e996d9a12b2274ef02f2126bc7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
|
|
Clang doesn't understand the -Wa,-mno-warn-deprecated option.
Remove it for now.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I9f91d6ec2db247e901ba9bc41bc4b888bbe43236
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Not all functions that call fsp_print_guid print their output with the
BIOS_SPEW log level, so introduce a new log level parameter so that the
caller of fsp_print_guid can specify which log level fsp_print_guid
should use for printing the GUID.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3b37afe703f506d4913f95a954368c0eec0f862d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69599
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nikolai Vyssotski <nikolai.vyssotski@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clang doesn't understand the -Wstack-usage=40960 option. Replace it
with -Wframe-larger-than=40960.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I7d8b9c26d3fc861615a8553332ed1070974b751b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69662
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Follow Dynamic Thermal Table Switching proposal to initialize
thermal table config E as default table for SMT.
Since the dynamic thermal table switching mechanism is still
under cooking, after discussing with thermal team, suggest
adopting config E(limit Soc not reach to max power) as default
thermal config to avoid any thermal-related issue during phase
build. Once the dynamic thermal table switching mechanism
is finished, will change the default value to config A.
BUG=b:232946420, b:258572474
TEST=emerge-skyrim coreboot
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Change-Id: I4aa90304e1e7bda7d580de2582129191e9eb0e76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68742
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
|
|
Create the crystaldrift variant of the skyrim reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:240970782
BRANCH=None
TEST=util/abuild/abuild -p none -t google/skyrim -x -a
make sure the build includes GOOGLE_CRYSTALDRIFT
Signed-off-by: Chao Gui <chaogui@google.com>
Change-Id: Ibb3ebaa7e4af1a03173b93b8c4fbd342f7cd7100
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Now that coreboot performs the necessary power sequencing, switch
from using the 'probed' flag to 'detect' for all I2C touchscreens.
This alleviates ChromeOS from having to probe to see which
touchscreen model is actually present, prevents breaking ACPI spec
by generating device entries with status 'enabled and present'
which aren't actually present, and improves compatibility with
upstream Linux and Windows.
BUG=b:121309055
TEST=build/boot ChromeOS and Linux on zork, ensure touchscreen is
functional, and ACPI device entry generated for correct touchscreen
model.
This mirrors the changes made for skyrim in commit 22683fab
(mb/google/skyrim: Use detect vs probed flag for touchscreens)
Change-Id: Idfe899bd535507c56f0825c6538246441b3b0827
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69457
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As all variants have a touchscreen option, in baseboard tables set the
enable GPIO high and hold in reset during romstage, then release reset
in ramstage. This will allow the touchscreen to make use of the runtime
I2C detect feature (enabled in a subsequent commit) so that an ACPI
device entry is created only for the touchscreen actually present.
This mirrors the change to skyrim in commit f90ff456
(mb/google/skyrim: Implement touchscreen power sequencing)
Change-Id: Ifdd75cd96e7b6880085a3f47214b92948a56aa2e
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69456
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses index 0x10 for IOE P2SB memory resource allocation
instead of static 0.
Additionally, switches to `mmio_resource` from `mmio_resource_kb`.
TEST=Able to build and boot Google/Rex and observed log as below.
Without the code change:
[SPEW ] PCI: 00:13.0 resource base 3fff0aa0000 size 1400 align 0
gran 0 limit 0 flags f0000200 index 0
With the code change:
[SPEW ] PCI: 00:13.0 resource base 3fff0aa0000 size 1400 align 0
gran 0 limit 0 flags f0000200 index 10
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I44caac73e245f536f3a22baafa1a6a0370e1dd37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69041
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
|
|
Correct G2 touchscreen HID to GT75CH02.
BUG=b:235919755
Test=Dump the SSDT on craask and check the HID had been modified.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Iad32e8cbd534dc43fca24d881092f3477ca1a4e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69600
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia7b9925ab0a594a0ec26746cbe938f7cf2aa0118
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Tested on google/vilboz (running the PCI rom with yabel).
Change-Id: Icd72c4eef7805aacba6378632cbac7de9527673b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Add (empty) baseboard GPIO tables, getter functions, and call to
gpio_configure_pads() in romstage, in preparation for adding
touchscreen GPIO configuration/power sequencing.
Change-Id: If0f626dbc7e601c2f49759e49a0baf027bf25f96
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69482
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
As all variants have a touchscreen option, in baseboard table set the
enable GPIO high and hold in reset during romstage, then release reset
in ramstage. This will allow the touchscreen to make use of the runtime
I2C detect feature (enabled in a subsequent commit) so that an ACPI
device entry is created only for the touchscreen actually present.
This mirrors similar changes made for skyrim, guybrush, and zork.
TEST=tested with rest of patch train
Change-Id: Id235815904dfc093549a1ed529e19974010977c7
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69547
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that coreboot performs the necessary power sequencing, switch
from using the 'probed' flag to 'detect' for all I2C touchscreens.
This alleviates ChromeOS from having to probe to see which
touchscreen model is actually present, prevents breaking ACPI spec
by generating device entries with status 'enabled and present'
which aren't actually present, and improves compatibility with
upstream Linux and Windows.
BUG=b:121309055
TEST=build/boot ChromeOS and Linux on barla/liara, ensure touchscreen
is functional, and ACPI device entry generated for correct touchscreen
model.
Change-Id: I142a6cdb6e8cef51fd925d34362a19a8736982a5
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69548
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
