| Age | Commit message (Collapse) | Author |
|---|
|
Add the pstate_msr union of a bitfield struct and a raw uint64_t to
allow easier access of the bitfields of the P state MSRs and use this
bitfield struct in get_pstate_core_freq and get_pstate_core_power. The
signature of those two function will be changed in a follow-up commit.
TEST=The coreboot-generated SSDT containing the P state packages stays
identical on Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8dc293351f9941cfb8a9c84d9fb9a4fd76361d5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
[ERROR] PNP: 002e.308 60 io size: 0x0000000008 not assigned in devicetree
[ERROR] ERROR: Resource didn't fit!!! PNP: 002e.308 60 *
size: 0x8 limit: fff io
Configure GPIO pins like asrock/h77pro4-m, this resolves the error and
makes CPU-fan readings work.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: If717d046d9f60ca66d1e33db59ad67d23c393376
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73818
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
[ERROR] PNP: 002e.b 62 io size: 0x0000000002 not assigned in devicetree
[ERROR] PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree
Set them to zero. This is also what the values are set to using vendor
firmware 1.90.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ide5980224f042e3da289aa28a18042ee8505d943
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73812
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Resolve this message:
[INFO ] PCI: Static device PCI: 00:16.3 not found, disabling it.
The ME KT is very unlikely to exist on a consumer device as it is only
used in combination with Intel AMT. AMT comes only with the corporate
ME variant, whilst this mainboard is consumer grade.
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ie1f0bad276f5c124d8d52772330982bf1342c72e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Enable SOC_INTEL_COMMON_BLOCK_GPIO_IOSTANDBY so the pads can be
configured with non-zero IOSSTATE values.
TEST=Able to build and boot google/rex. GPIO debug print is showing
GPIO PAD config DW1 bit[14:17] are getting programmed.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I9e63fe946d541769fa0ddbb23f902f9c905735c1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Provide support function to query fsp misc_data hob and return smu
reported power and thermal limit.
BUG=b:253301653
TEST=Use get_amd_smu_reported_tdp(&tdp) values match what FSP placed in
the hob.
Change-Id: I9f0d8cdd616726c5a714e99504b83b0126dd273b
Signed-off-by: Jason Glenesk <jason.glenesk@amd.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73747
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add enable_gpio for USB power resource
BUG=b:273891168
TEST=Able to detect USB CAM
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I08ebe560c8b75c8b590c889b7b90dbe678318d2a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73754
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Follow thermal team's request on b/248086651 comment#32. Update the
thermal table setting for each mode and the conditions of temperature
switching.
BUG=b:248086651,b:241180483
TEST=emerge-skyrim coreboot
Change-Id: Ibcf6c110029d39bdc6bfaf46c234a4073ee69f30
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
|
|
Intel SPR-SP chipset has EBG instead of LBG.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I9429fe332bb5f01a41aa205c76ad9f0159f93eee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71959
Reviewed-by: Jian-Ming Wang <jianmingW@supermicro.com>
Reviewed-by: TimLiu-SMCI <timliu@supermicro.com.tw>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It implements SPR ramstage including silicon initialization, MSR
programming, MP init and certain registers locking before booting
to payload.
Change-Id: I128fdc6e58c49fb5abf911d6ffa91e7411f6d1e2
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Several FSP HOBs processing codes are similar to Intel Cooperlake-SP
codes in soc/intel/xeon_sp/cpx.
Register datasheet please reference Sapphire Rapids EDS Vol2 Doc#612246
and Emmitsburg PCH EDS Doc#606161.
Change-Id: Ia022534e5206dbeec946d3e5f3c66bcb5628748f
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch modifies the serial msg log_level at runtime to highlight
an ERROR if the DIMM count is zero. It would help to draw the
attention while parsing the serial msg and catch any underlying issue.
TEST=Able to see ERROR msg while booting google/rex with FSP v3064
Without this patch:
[DEBUG] 0 DIMMs found
With this patch:
[ERROR] No DIMMs found
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Iacf41efecb4962f91cf322bbc50636dc44033e3e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73756
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Align project style with other chrome projects.
TEST=built FW not changed
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Icfd1d274216d387cab6feb68afa49fc63c8c52e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73761
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Rex uses GL9755 and miss select the driver.
BUG=b:273906526
TEST=SD card is functional.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I674b052689c80873e8a3b295d15788f3a93f0b82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73760
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Some MSRs used in SPR code are common among currently supported
Xeon-SP generations and are added to the top-level Xeon-SP msr.h. MSRs
which have changed are added to SPR's soc_msr.h.
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Change-Id: I92b433a9686734716dc7936895fb79c7751f7f9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73172
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: David Hendricks <ddaveh@amazon.com>
Change-Id: I2ecfebdde453a48b7b0e6f21b3c4394411eed671
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73171
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
Change-Id: I2ece7aac4339266068d4fc8fb1c58d0573eb2895
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72612
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
The current VBT causes problems with Windows 10. Once the Intel driver
is used instead of the generic graphics driver, the display turns off
although the system keeps running normally. Linux has no issues. It had
been extracted from the vendor video BIOS, which in turn had been
extracted from the vendor firmware.
This change replaces the VBT with one that was dumped through debugfs
and the drm/i915 driver in Linux, booted from the vendor firmware at
version 2.10 (beta). It fixes the issue with the Intel graphics driver
on Windows 10.
Change-Id: Icbb3950b37dad5ed308f3bafb73b71859227d26b
Signed-off-by: Michael Büchler <michael.buechler@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73711
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the NixOS configuration into a subdirectory so that configurations
for other distros can be added as well.
Change-Id: I0462c1a6541878c973be4302c5c5e9e9bfaed2a6
Signed-off-by: Felix Singer <felix.singer@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Certain C source files for coreboot stages require fmap_config.h to
be present. When building coreboot using multiple jobs the dependency
is not always satisfied due to race condition and results in make
error. Work around it by adding fmap_config.h to stage C deps.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I3a70beedf2eb1c018c5ff98163904253f9a87a61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69819
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Updating from commit id 9881bb93a:
2022-11-21 19:12:00 +0100 - (Merge "docs(spm): update threat model" into integration)
to commit id 4c985e867:
2023-03-14 19:53:19 +0100 - (Merge "fix(cpus): workaround for Neoverse V1 errata 2743233" into integration)
This brings in 547 new commits.
Note: commit id 1f49db5f solves the "LOAD segment with RWX permissions"
error when binutils 2.39 is used.
Change-Id: I35355040c6958d470d78002048e78a06fd7f6f02
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73735
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
TEST=Enable DMA protection on MSI PRO Z690-A DDR4 and observe
the I/O devices like USB and NVMe fail to enumerate in UEFI
Payload (basically proving that DMA protection works).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iecaa3d04f1447b7e73507ca57a0d23d42e24d663
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68450
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The HSPHY firmware must be downloaded to DMA-allowed host address
space. Check for DMA buffer presence and use it as the buffer for HSPHY
firmware to be downloaded from CSME.
TEST=Successfully load HSPHY firmware to CPU on MSI PRO Z690-A DDR4
with DMA protection enabled.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I88edda26a027b557eeaba80426a5b7be7199507d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68556
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I226305fa547e9d9ea541a5806d543aa358bce28d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72069
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new common block with VT-d/IOMMU support. The patch adds an
option to enable DMA protection with PMR. However the payload and
OS must support VT-d in order to properly handle I/O devices.
TEST=Enable DMA protection on MSI PRO Z690-A DDR4 and observe
the I/O devices like USB and NVMe fail to enumerate in UEFI
Payload (basically proving that DMA protection works).
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Id7edf982457c1139624e5cd383788eda41d6a948
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
This patch updates the Memory Hob Info data structure as per FSP
v3064 source code change.
BUG=b:273894357
TEST=Able to see `smbios type 17` table while booting google/rex.
Without this patch:
[DEBUG] 0 DIMM found
With this patch:
[DEBUG] 8 DIMM found
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3885fa7143cecc0b56e20278b69951c548ac451b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73755
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
K3KL6L60GM-MGCT 1 (0001)
MT62F1G32D2DS-026 WT:B 2 (0010)
K3KL8L80CM-MGCT 2 (0010)
H58G56BK7BX068 2 (0010)
BUG=b:270103716
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot
Change-Id: Ia53c2be2ec606f42ac8bca06103b028e62ae6dbc
Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73733
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Add supported memory parts in mem_parts_used list, and generate SPD ID
for these parts.
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H9JCNNNBK3MLYR-N6E 0 (0000)
H58G56BK7BX068 1 (0001)
MT62F1G32D2DS-026 WT:B 1 (0001)
K3KL8L80CM-MGCT 1 (0001)
H58G66BK7BX067 2 (0010)
MT62F2G32D4DS-026 WT:B 2 (0010)
K3KL9L90CM-MGCT 2 (0010)
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=run part_id_gen to generate SPD id
Change-Id: I82919919ec33d6bf9d86132490df754873b5df88
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch passes a hint flag to QcLib on Lazor boards to tell it to
limit the DDR frequency for certain memory parts (8GB Hynix) to work
around a board-specific stability issue.
BRANCH=trogdor
BUG=b:267387867
TEST=Validated on qualcomm sc7180 development board
Change-Id: I45915cf93d2a57ff0c9710f2ac36dfb665eff1c6
Signed-off-by: Sudheer Kumar Amrabadi <samrabad@codeaurora.org>
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73727
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Create the yavilla variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_YAVILLA
Change-Id: I4539090da5e1db474a8f58a42aecc38659959f75
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add new ram_id:0010 for Micron MT62F1G32D2DS-023 WT:B.
The RAM ID table has been assigned as:
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
MT62F512M32D2DR-031 WT:B 1 (0001)
H58G56BK8BX068 2 (0010)
MT62F1G32D2DS-023 WT:B 2 (0010)
BUG=b:273138520
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: Idc08624469590096047e5f77fb2e4ffb733f09ec
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73726
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
|
|
Add new memory MT62F2G32D4DS-026 WT:B to replace H9JCNNNBK3MLYR-N6E．
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
MT62F1G32D4DR-031 WT:B 1 (0001)
MT62F1G32D2DS-026 WT:B 2 (0010)
MT62F2G32D4DS-026 WT:B 3 (0011)
K3LKBKB0BM-MGCP 4 (0100)
BUG=b:273177939
BRANCH=None
TEST=emerge-skyrim coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: I545bd8d9f88e7b3055acef4066769e6fcb766cc0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73681
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Print IOAPIC ID for GSI #0 in logs, as part of IOAPIC initialization.
BUG=None
TEST=Confirmed "IOAPIC: ID = 0x00" printed in logs.
Signed-off-by: Jay Patel <jay2.patel@intel.com>
Change-Id: I8d8e94fe623795d059ec2abbb3319b60fd80f5ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73707
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Rwmove temp sensor 3 for taniks since we do not use it.
BUG=b:265075696
TEST=emerge-brya coreboot, flash to DUT and will not see error messages
Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com>
Change-Id: Ib2c0cc8f1b2e65616c71d66632144ac89ca09fa1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73718
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I9e83a3ac56d5c42d8d6839cc4d961adf0b656fb5
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73725
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch will add new board variant to enable MCHP1727 EC Card
for MTL-RVP
BUG=b:262800416
BRANCH=none
TEST=check if you can observe MEC EC option as part of make menuconfig.
Able to boot to ChromeOS with Microchip EC.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ie0d3c37bcab5e4b90a131e17996c4b6dcbae7d5d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70668
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Vijay P Hiremath <vijay.p.hiremath@intel.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: I4a9192c55d63531621dd7bc49f1ead7f58dff893
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73648
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Otherwise Checking combo_config[++combo_index] causes Out-of-Bounds
access.
Change-Id: I50d466ee98edfb18c01fc7ba43e929640b33c7c1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73647
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ia98fdbee4c4005562662313ebe2478d0aeb879bc
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73724
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
BUG=b:271373437
BRANCH=none
TEST=Verify USB-A device could wake up Aurash.
Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com>
Change-Id: I67fc02d6c5660e0e3d1ab95bbda8ace1dc14b524
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73414
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch increases FW_CONFIG for USB_DB to 3-bits.
BUG=b:273346973
TEST=Able to build and boot google/rex with Proto 2 SKU
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib07ba1d54e7f7e2b09a99438529e503d9c9edb7d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Adding EC_HOST_EVENT_PANIC to SCI mask allows the EC to interrupt the
Kernel when an EC panic occurs. If system safe mode is also enabled
on the EC, the kernel will have a short period to extract and save info
about the EC panic.
BUG=b:268377440
BRANCH=firmware-dedede-13606.B
TEST=Observe kernel ec panic handler run when ec panics
Change-Id: I24f929ae60a406d0091956dc6cab3e2876ca23e9
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips
initial probe during kernel boot and prevent privacy LED blink.
BUG=b:268607999
TEST=Build and boot rex proto1 to OS and verify privacy LED behavior.
Change-Id: Ife849f7407b02867ddb992d7eebb08b0b44aecc8
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kiran2 Kumar <kiran2.kumar@intel.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
With newer xeon_sp processors, the concept of "north bridge" became
obsolete, instead uncore should be used. Therefore we use uncore_acpi.c
(instead of nb_acpi.c) going forward.
Change-Id: I91ec9023152996bf9f2300a369aff3c4f19d75fd
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73696
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
The MP2 firmware doesn't do anything useful when booting into recovery
mode, so don't include it in the RO image if vboot is enabled.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5afbf7e9e730e6951c416f3a3ca75f69a22099cf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73660
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When doing coreboot builds, we can set V=1 to see all of the make info
printed as the compile is happening. Use this flag to set the debug
flag for amdfwtool so it doesn't have to be enabled separately.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5b05cbc9f9b540a174db479822af657cf35733de
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73658
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The regex getting rid of lines containing a '*' didn't match anything
in any configs, so get rid of it. There's nothing in the amdfwtool
dataparse.c file that would match it either.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I05aaf46cfb479cebab9234a47574073335984a5f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
After adding the ability to add paths into the amdfw.cfg file for the
amdfwtool, the dependency generation needs to be updated to not add
the firmware location in front of those values.
This also allows us to filter out the MP2 binaries as dependencies
based on whether or not the Kconfig value is set.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3a9b9c8246808dc60020a32a7d9d926bc5e57ccd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73657
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This allows individual components to be placed in a location other than
what is specified by the FIRMWARE_LOCATION line.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I3a83e52d081a5909d54eacc575dd2b40b09e4038
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73656
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
If recovery APCB is not passed, amdfwtool will build amdfw*.rom with
AMD_BIOS_APCB_BK entry pointing to the same offset as AMD_BIOS_APCB
entry. This will help to save 40 KiB flash space in each FW slot. On
ChromeOS, this means saving ~120 KiB flash space.
BUG=b:240696002
TEST=Build and boot to OS in Skyrim.
Change-Id: Ib3bbc1eededae20b2cd48f514722a207c46536a0
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73662
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If Recovery/Backup APCB is not passed, then AMD_BIOS_APCB_BK entry is
not populated. But PSP expects that bios directory entry to be
populated. Also on mainboards where both APCB and recovery APCB are same
(eg. Skyrim), 2 copies of the same APCB are added to amdfw*.rom. Update
amdfwtool to support not passing recovery/backup APCB. If the recovery
APCB is not passed, then populate AMD_BIOS_APCB_BK entry and make it
point to the same offset as AMD_BIOS_APCB entry.
BUG=b:240696002
TEST=Build and boot to OS in Skyrim. Ensure that the device can enter
recovery mode. Perform multiple suspend/resume cycles.
Change-Id: I031ba817573cd35160f5e219b1b373ddce69aa6b
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73661
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On newer SoCs the initial alignment is not required. So skip initial
alignment. This saves 64 KiB flash space on each firmware slots. This
also saves ~5 ms while loading amdfw.rom
BUG=b:240696002
TEST=Build and boot to OS in Skyrim.
Change-Id: I27cbfde2d7d58b62a4c0039c60babc3fb3bd95fa
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73654
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I97c8c07db9b44aa89b433e7962ec77c8501ecaa9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73688
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I8f8a0bfeaea508d3b4ad1b3fe2e68742cbab5570
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73687
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Icd3d16ab2cb34dc81fc12ec139c52ecaa170528d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73686
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running `clflush`
to invalidate the cache region based on commit 3134a81 for boot
performance improvement.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I1fe6072a3c23a02c9a691406f179bfc8f0f18a93
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73685
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Currently on power key long press, PMIC will be reset. It would cause
an unwanted reset pulse in the power-off sequence. To match expected
sequence, change PMIC behavior to "force shutdown".
BUG=b:271771606
TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse
BRANCH=corsola
Change-Id: I9ab35d82e57f43bac99fa8bd7bb69fcf52250311
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73705
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently on power key long press, PMIC will be reset. It would cause
an unwanted reset pulse in the power-off sequence. To match expected
sequence, change PMIC behavior to "force shutdown".
BUG=b:271771606
TEST=long-pressing power key doesn't trigger PMIC_AP_RST_L pulse
Change-Id: I1626892fd582dfab8fe1c1ede1da00549bc97142
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <jason-ch.chen@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73704
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Modify USB C1 mux_conn to 1. It should match ec settings.
BUG=b:272394875, b:272667290
BRANCH=firmware-brya-14505.B
TEST=Plug USB-C hub in USB C1 and could recognize USB drive and hdmi.
Change-Id: I61b77405d1790b044174cef954e5bf910141f424
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73679
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1. Modify irq_gpio GPP_H0 -> GPP_A23
BUG=b:272218750
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I8e178b149015ed8027b547e4c2109b3aef8a7484
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
1. Add generic.stop_gpio = GPP_C6
2. Add c.stop_off_delay_ms = 2
BUG=b:271966059
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I33857443d8a68e7b50ac5f8f08afc017fe4f5a59
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
According to file thermal_table_0310, adjust the STT settings.
BRANCH=none
BUG=b:257149501
TEST=emerge-skyrim coreboot chromeos-bootimage
Then the thermal team has verified.
Change-Id: If4500c85dcea051aca15602f1fb4b5ec80b73e67
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73698
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
Configure the I2C bus high and low time for audio.
BUG=b:271804915
BRANCH=dedede
TEST=Build and confirm I2C clock for audio is between 380 kHz and 400
kHz
Change-Id: I2987a39abc5527844424edfa1cf70d5c5cea5357
Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73701
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Create the uldren variant of the nissa reference board by copying
the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:271513530
BRANCH=None
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_ULDREN
Change-Id: Ibbcd34fb4ef1f7464f0c94d2fcf75280c3eed6be
Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73680
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel Meteor Lake decides to enable early caching of the TOM region to
optimize the boot time by selecting `SOC_INTEL_COMMON_BASECODE_TOM`
config.
TEST=Able to build and boot google/rex to ChromeOS and reduce the boot
time by 77 ms.
Without this patch:
950:calling FspMemoryInit 936,811 (19,941)
951:returning from FspMemoryInit 1,041,935 (105,123)
With this patch:
950:calling FspMemoryInit 905,108 (20,103)
951:returning from FspMemoryInit 964,038 (59,929)
Change-Id: Iebb3485b052386b43d5bccd67a04e6115cbcc20d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73274
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables early caching of TOM region to optimize the boot
time if valid mrc cache is found (i.e. except the first boot after
flashing/updating few AP firmware image).
TEST=Able to build and boot google/rex to ChromeOS.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia575ad0f99d5b0fd015e40b0862e8560700f6c83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73334
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch uses the IA common code API to store the top_of_ram (TOM)
address intonon-volatile space (CMOS).
The code logic will update the TOM address in CMOS NVS if the
`top_of_ram` address is calculated differently in any boot and
also takes care of caching the updated range.
TEST=Able to build and boot google/rex to ChromeOS.
First boot:
Before calling into FSP-M
[DEBUG] 0x00000000fef00006: PHYBASE0: Address = 0x00000000fef00000, WB
[DEBUG] 0x00003ffffff80800: PHYMASK0: Length = 0x0000000000080000, Valid
[DEBUG] 0x00000000fef80006: PHYBASE1: Address = 0x00000000fef80000, WB
[DEBUG] 0x00003ffffffc0800: PHYMASK1: Length = 0x0000000000040000, Valid
[DEBUG] 0x00000000ff000005: PHYBASE2: Address = 0x00000000ff000000, WP
[DEBUG] 0x00003fffff000800: PHYMASK2: Length = 0x0000000001000000, Valid
[DEBUG] 0x00000000f9800005: PHYBASE3: Address = 0x00000000f9800000, WP
[DEBUG] 0x00003fffff800800: PHYMASK3: Length = 0x0000000000800000, Valid
...
[DEBUG] tom_table invalid signature
[DEBUG] top_of_ram = 0x76000000
[DEBUG] Updated the TOM address into CMOS 0x76000000
On consecutive boot:Before calling into FSP-M:
The TOM region is already cached.
[DEBUG] 0x00000000fef00006: PHYBASE0: Address = 0x00000000fef00000, WB
[DEBUG] 0x00003ffffff80800: PHYMASK0: Length = 0x0000000000080000, Valid
[DEBUG] 0x00000000fef80006: PHYBASE1: Address = 0x00000000fef80000, WB
[DEBUG] 0x00003ffffffc0800: PHYMASK1: Length = 0x0000000000040000, Valid
[DEBUG] 0x00000000ff000005: PHYBASE2: Address = 0x00000000ff000000, WP
[DEBUG] 0x00003fffff000800: PHYMASK2: Length = 0x0000000001000000, Valid
[DEBUG] 0x00000000f9800005: PHYBASE3: Address = 0x00000000f9800000, WP
[DEBUG] 0x00003fffff800800: PHYMASK3: Length = 0x0000000000800000, Valid
[DEBUG] 0x0000000075000005: PHYBASE4: Address = 0x0000000075000000, WP
[DEBUG] 0x00003fffff000800: PHYMASK4: Length = 0x0000000001000000, Valid
Change-Id: I2569495570652c488096f6a29f58dd8f0103af9d
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73273
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch implements a module that can store the top_of_ram (TOM)
address into non-volatile space (CMOS) during the first boot and
use it across all consecutive boot.
As top_of_ram address is not known until FSP-M has exited, it
results into lacking of MTRR programming to cache the 16 MB TOM,
hence accessing that range during FSP-M and/or late romstage causing
long access times.
Purpose of this driver code is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
TEST=Able to build and boot google/rex to ChromeOS.
Without this patch:
950:calling FspMemoryInit 936,811 (19,941)
951:returning from FspMemoryInit 1,041,935 (105,123)
With this patch:
950:calling FspMemoryInit 905,108 (20,103)
951:returning from FspMemoryInit 987,038 (81,929)
Change-Id: I29d3e1df91c6057280bdf7fb6a4a356db31a408f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73272
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
If we need to put a CBFS chunk into a specific region, add a line in
any Makefile.inc
regions-for-file-xxx=region_name
TODO:Do a complete binary identical test for all the mainboards.
Change-Id: Ie37a8a9230dc8b8e5664be8806f047afb94fba69
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Documentation and hardware differ in the number of MCA bank names, so
remove the excess ones to prevent a "CPU has an unexpected number of MCA
banks!" warning message.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I75a2348561833f3f19181b4f30a6971ecb317899
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73650
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, the address of the microcode update can
be directly written to the raw value instead of needing to split it into
the lower and higher 32 bits and assigning those separately.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I51c84164e81477040a4b7810552d3d65c0e3656b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73636
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, the address of the bootblock_resume_entry
can be directly written to the raw value instead of needing to split it
into the lower and higher 32 bits and assigning those separately.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Suggested-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7ebab1784ec592e18c29001b1cf3ee7790615bf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73635
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
fix compilation on musl-libc systems by providing an implementation
for __always_inline
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I01a7eb9ed28e79523623ab362510ec2d93f4a8b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73667
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch selects `X86_CLFLUSH_CAR` config for running
`clflush` to invalidate the cache region.
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6b2dce39f82e28cd99ad8621c78bae494c4f16ba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73333
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When cbmem is initialized in romstage and postcar placed in the stage
cache + cbmem where it is run, the assumption is made that these are
all in UC memory such that calling INVD in postcar is OK.
For performance reasons (e.g. postcar decompression) it is desirable
to cache cbmem and the stage cache during romstage.
Another reason is that AGESA sets up MTRR during romstage to cache all
dram, which is currently worked around by using additional MTRR's to
make that UC.
TESTED on asus/p5ql-em, up/squared on both regular and S3 resume
bootpath. Sometimes there are minimal performance improvements
when cbmem is cached (few ms).
Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37196
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6f2047e62c1e999823bf98acaf3530aa62478449
Signed-off-by: Kevin Keijzer <kevin@quietlife.nl>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73672
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Fabian Groffen <grobian@gentoo.org>
|
|
Change stop_delay_ms time(T3) from 180 to 150 to meet specification.
T3 min-value of HID-I2C should be 150ms.
BUG=b:267280863
TEST=emerge-skyrim coreboot chromeos-bootimage.
Change-Id: I7ef7db4edaecece1fa5ab07e30a80e556ed35f8b
Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Allow USB2/3 hotplug event to wake up S0ix.
BUG=b:236189998
BRANCH=firmware-brya-14505.B
TEST=Verify USB-A device could wake up Kinox
Change-Id: I8aeeeac6c21289b70bdc7ffddc57687ac39e8456
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73585
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
use __linux__ instead of __GLIBC__ guard for Linux-specific includes
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: Ifbf4552591c0df7811c5b37a9207c0901b6fd68f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73666
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
- use __linux__ instead of __GLIBC__ guard for Linux-specific includes
- use POSIX ioperm instead of deprecated iopl
Signed-off-by: Fabian Groffen <grobian@gentoo.org>
Change-Id: I99613007aa9feddcb1041f31085cdeb195ff7a68
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Get string of hex value of a given number.
Change-Id: I6d3525db19089938897b9d19ad9875bb07e0eecf
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72953
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This separates the SPL fusing function into a separate C file which can
be excluded if it is not needed. This allows the psp_set_spl_fuse()
function to be made static again as the state of the function will
always match the boot_state entry.
Move the required #defines to the common header file so they can be
used by both psp_gen2.c & spl_fuse.c.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ifbc774a370dd35a5c1e82f271816e8a036745ad5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73655
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Even though right now TSEG will always be located below 4GB, better not
make assumptions in the SMM relocation code. Instead of clearing the
higher 32 bits and just assigning the TSEG base and per-core SMM base to
the lower 32 bits of the MSR, assign those two base addresses to the raw
64 bit MSR value to not truncate the base addresses. Since TSEG will
realistically never be larger than 4GB and it needs to be aligned to its
power-of-two size, the TSEG mask still only needs to affect the lower
half of the corresponding MSR value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1004b5e05a7dba83b76b93b3e7152aef7db58f4d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5923df84f0eb3a28ba6eda4a06c7421f4459e560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Since mst_t is a union of the struct containing the lower and higher 32
bits and the raw 64 bit value, there's no need to convert the lower and
higher 32 bits into a 64 bit value and we can just use the 64 bit raw
value.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ibc5d64c74eaabfc4b7834a34410b48f590f78a12
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73637
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
On IBM/SBP1 with 384 cores it takes a while for all APs
to check in. Use linear scaling instead of hardcoding an
arbitrary limit for the timeout.
Change-Id: If020a3fa985bfc7fd2f0aa836dc04e6647a1a450
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: TangYiwei
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Set up SRAT table in X2APIC mode when necessary.
Change-Id: Ib8b4cebefe81f7b5514524dba2fa364eee4bb157
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It was used for printing the dependencies which is now taken by macro
DEP_FILES in soc/amd/common/Makefile.inc.
TEST=binary identical test on google/guybrush amd/chausie
Change-Id: I1b86df2cb2ed178cf0a263c50ccb3e2254a3852b
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73627
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move main body of PSP padding into a loop which can add a new combo
entry. In the loop, get the FW files from each fw.cfg, create new pack
of PSP, and fill the combo header. Currently Feature COMBO is still
not fully functional. But the non-combo case will not be affected for
sure.
The real changes are
1. Add a do-while loop.
2. Remove a "TODO" comment.
All other changes are re-indenting and re-filling.
Change-Id: I351192a4bc5ed9ec0bfa3f2073c9633b8b44246d
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58554
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ASPM for RP5 (wireless) and RP9 (SSD).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I428040caf171bdcfedc285cdeddc55bcbec40f3c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72753
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add new ram_id:0011 for Micron MT62F1G32D2DS-023 WT:B.
Add new ram_id:0100 for Micron MT62F2G32D4DS-023 WT:B.
DRAM Part Name ID to assign
K3KL8L80CM-MGCT 0 (0000)
H58G56BK7BX068 0 (0000)
MT62F1G32D2DS-026 WT:B 0 (0000)
K3KL9L90CM-MGCT 1 (0001)
H58G66BK7BX067 1 (0001)
MT62F2G32D4DS-026 WT:B 1 (0001)
MT62F512M32D2DR-031 WT:B 2 (0010)
H58G56BK8BX068 3 (0011)
MT62F1G32D2DS-023 WT:B 3 (0011)
H58G66BK8BX067 4 (0100)
MT62F2G32D4DS-023 WT:B 4 (0100)
BUG=b:271188237
BRANCH=None
TEST=FW_NAME=markarth emerge-skyrim coreboot
Change-Id: I59a6a6dff249cd4fe982a4de824848f1bac0ecba
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73510
Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add Micron memory part MT62F1G32D2DS-023 and MT62F2G32D4DS-023 to LP5
global list. Attributes are derived from CCM005-1974498342-145. Also,
regenerate the SPD files for the SoC.
BUG=b:271188237
TEST=util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5
Change-Id: I6675a68b7a515bd6d21db3ea2da762b06dee017a
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
1. device ref pcie_rp11 -> pcie_rp9 on.
BUG=b:270657362
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: If23785f42466ba94f33d4d15dde96de29dbb3a1e
Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73530
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable ELAN eKTH5015M touchscreen.
BUG=b:271966059
BRANCH=firmware-brya-14505.B
TEST=FW_NAME=omnigul emerge-brya coreboot
Change-Id: I41eac949f21a48098b445f8d1b05f308672f7ab8
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73584
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Set DmiMaxLinkSpeed to 4 in FSP to ensure that FSP always supports
PCIe Gen 4 drives.
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I0e31919122dacfbdc2486fa8216a28b479f3bd00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72012
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For now, combo index is 0, and only the first entry in config table is
used. The index will grow when there are more combo entries.
Add a command parameter to give fw.cfg for combo index 1. Process the
combo config in the future loop.
Change-Id: I00609d91defc08e17f937ac8339575f84b1bd37c
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
And move the additional processing to this new function.
Change-Id: Id101d63e4d30a6e57ac1aa79665a4ba22b2956f1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73509
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
And rename PSP_HW_IPCFG_FILE to PSP_HW_IPCFG_FILE_SUB0
Change-Id: Ia1ab8482074105de367905be2b4b0418066823d2
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73531
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Lastbus is a bus debug tool. When the bus hangs, the bus transmission
information before resetting will be recorded.
The watchdog cannot clear it and it will be printed out for bus hanging
analysis.
There are two versions for lastbus:
Version 1 for MT8186, and version 2 for MT8188.
BUG=b:263753374
TEST=build pass.
Change-Id: Ibaf510481d1941376bd8da0168ef17c99a0fb9a2
Signed-off-by: ot_zhenguo.li <ot_zhenguo.li@mediatek.corp-partner.google.com>
Signed-off-by: jason-ch chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73624
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Change-Id: I078b57825377f97f9f5f2b607fa134e3a67e9685
Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73557
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
