| Age | Commit message (Collapse) | Author |
|---|
|
the board won’t have a SD card reader, so disable it.
BUG=b:285477026
TEST=USE="project_joxer emerge-nissa coreboot"
Change-Id: I6a55058b453771d264700a1364ef538f831148e4
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
For Phoenix the lane numbers in the DXIO descriptor match the ones in
the schematic, so remove the corresponding text and the table from the
comment on the fsp_dxio_descriptor struct. Since there's no logical to
physical lane number remapping needed for the lanes in the Phoenix DXIO
descriptors, drop the 'logical' from the start_logical_lane and
end_logical_lane fields in the DXIO descriptor and rename those to
start_lane and end_lane.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I94664fd9d3807370b73f9fae8645d444e5faf7b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Since GPP_C03/GPP_04 are floating in HW design, we set HBR smbus pin
as NC, in case it prevents ese and cse from entering suspend.
BUG=b:283053968
TEST=Verified on screebo non-TBT SKU, suspend and resume works.
Change-Id: I401db32f0286de61ce3ab6c61de9528ec76cb51d
Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75643
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make the default MEDIATEK_DRAM_SCRAMBLE value overridable by adding a
prompt string.
BUG=b:285474337
TEST=build pass and check scramble feature is disabled on serial build
Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com>
Change-Id: I703ac9aa3ccc4dd9d0fef9949c6b0d49449971a4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75815
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds the initial code for adlrvp_rpl variant board
which includes
1. Add overridetree.cb to corresponding variant directory
2. Update mainboard name in Kconfig and Kconfig.name
3. Add config option to select corresponding overridetree.cb
BUG=b:286030718
BRANCH=firmware-brya-14505.B
TEST=Able to build with the patch and boot the adlrvp_rpl platform
to ChromeOS on Windows SKU.
Signed-off-by: Harsha B R <harsha.b.r@intel.com>
Change-Id: Ifb95ff705189863d23894769ff450f9528e73b14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73962
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
USB type-A port with same PLD.token information as USB type-C port,
causes conflict while generating ACPI code for the EC CONN device.
Use a different PLD.token number for type-A port to fix the issue.
BUG=b:286328285
TEST=check ACPI can have right USB port in EC CON.
before patch:
Package (0x02)
{
"usb2-port",
\_SB.PCI0.XHCI.RHUB.HS01
},
Package (0x02)
{
"usb3-port",
\_SB.PCI0.TXHC.RHUB.SS01
},
after patch:
Package (0x02)
{
"usb2-port",
\_SB.PCI0.XHCI.RHUB.HS01
},
Package (0x02)
{
"usb3-port",
\_SB.PCI0.TXHC.RHUB.SS03
},
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: If3e76c11dd6808eee4c9c2f3f71604a60379b5a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75911
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Ovis uses MTL-H.
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
TEST=cros build-packages --board ovis chromeos-bootimage
Change-Id: I284c72b902490187d0b15e4fc81650af1cfa16d7
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75887
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch renames config `SOC_INTEL_METEORLAKE_U_P` to
`SOC_INTEL_METEORLAKE_U_H` as per Intel Meteor Lake Processor EDS
version 1.3.1 (doc number: 640228).
With new branding, the MTL-U/H-Processor Line offered in a 1-chip platform that includes the Compute, SOC, GT, and IOE tile on the
same package.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I032be650bbfef0bf0ef86bb37417b1d854303501
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75931
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
|
|
DDR5 spd is not supported read by coreboot. But FSP can read it,
so print the memory information from smbios type17 dimm information.
TEST=check the coreboot log.
memory Channel-0-DIMM-0 type is DDR5
memory part number is MTC8C1084S1SC56BG1
memory max speed is 5600 MT/s
memory speed is 5200 MT/s
memory size is 16384 MiB
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I2b5ca1f4a59598531a6cba500672c2717f2a7b00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75756
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
acpi timer needs to be disabled for xtal shutdown, requirement for platform
to enter deepest sleep state (s0i2.2).
BUG=b:274744845
TEST=Able to boot and verify S0ix is working
w/o this cl:
> iotools mmio_read32 0xfe0018fc
0x0
> iotools mmio_read32 0xfe4018fc
0x0
w/ this cl:
> iotools mmio_read32 0xfe0018fc
0x2
> iotools mmio_read32 0xfe4018fc
0x2
Change-Id: Ib87b7555217b6954fca98f95b86d03016cd9b783
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75898
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
get_usb_port_references refer the PLD group. If the port assign cross
ports like mux[0] use USB3 and mux[1] use USB1, then we need set USB3
to group 1. Update the PLD panel to back as well.
BUG=b:286328285
TEST=check ACPI can have right USB port in EC CON.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I97517ecd4f8615af749fb6d007ded8e171796f7c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75912
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Change-Id: If1fe1c4db1b825dac44aec01902f44c05582e69b
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Using the boolean type and the true/false macros give the reader a
better understanding about the option. Thus, use the bool type for the
attribute and use the macros for assignments.
Skylake mainboards which use that option were changed by the following
command ran from the root directory.
socs="SOC_INTEL_(SKYLAKE|KABYLAKE|SKYLAKE_LGA1151_V2)" && \
option="s0ix_enable" && \
grep -Er "${socs}" src/mainboard | \
cut -d ':' -f 1 | \
awk -F '[/]' '{print $1"/"$2"/"$3"/"$4}' | \
xargs grep -r "${option}" | \
cut -d ':' -f 1 | \
xargs sed -i'' -e "s/${option}\".*\=.*\"1\"/${option}\" \= true/g"
Change-Id: I372dfb65e6bbfc79c3f036ce34bc399875d5ff16
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75871
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I85f58565bf1f955f704e223d538d0b374bc6fbda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Configure I2C0/1/3/4 timing in devicetree to ensure I2C devices
meet timing requirement. Note that I2C5 timing will be updated
separately when the tuning done
BUG=b:280559903
TEST=Build and check I2C devices timing meet spec.
| | I2C0-Codec | I2C0-WFC | I2C1 | I2C3 | I2C4 |
|-------------|------------|----------|--------|-------|---------|
| FSMB(KHz) | 347 | 343.2 | 389.3 | 393.7 | 381.9 |
| TLOW(us) | 2.1 | 2.093 | 1.895 | 1.902 | 1.953 |
| THIGH(us) | 0.647 | 0.628 | 0.602 | 0.62 | 0.612 |
| THD:STA(us) | 0.633 | 0.64 | 0.601 | 0.6 | 0.601 |
| TSU:STA(us) | 0.617 | 0.621 | 0.619 | 0.659 | 0.61 |
| TSU:STO(us) | 0.656 | 0.647 | 0.667 | 0.727 | 0.634 |
| TBUF(us) | 86.15 | >14.088 | >9.833 | >8 | >10.366 |
Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Change-Id: I5421e4fe68e856bbe9f19544954a94670c895a47
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75150
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Remove rp2 and add rp1/rp3 for screebo
BUG=b:286187816
BRANCH=none
TEST=emerge-rex coreboot and verify TBT works.
Change-Id: I1013d26c705f2a3f9378d944bd863d94f319d36c
Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75832
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is no longer necessary to explicitly add "ERROR: " in front of
BIOS_ERR message.
Change-Id: I3ff2081d38f94556481efa02f242795bbfc77517
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75876
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update overridetree to support ELAN and G2_G7500 touchscreen.
BUG=b:285477026
TEST=emerge-nissa coreboot and check touchscreen function
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I236a2815f956929c6cd84c981cb15e9ab0f657b7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75762
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie17fd14bed9ec91c5f11aee00bf5d2d2e253ec08
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75897
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I296697d579b9ad8e35b22ada939a74a5ef6d6f61
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75828
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable early caching of the TOM region to optimize the boot time by
selecting `SOC_INTEL_COMMON_BASECODE_RAMTOP` config.
Purpose of this feature is to cache the TOM (with a fixed size of
16MB) for all consecutive boots even before calling into the FSP.
Otherwise, this range remains un-cached until postcar boot stage
updates the MTRR programming. FSP-M and late romstage uses this
uncached TOM range for various purposes (like relocating services
between SPI mapped cached memory to DRAM based uncache memory) hence
having the ability to cache this range beforehand would help to
optimize the boot time (more than 50ms as applicable).
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: I579f85e84e0aba7f192ff81a6725d65b7f79ff75
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74517
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds a new Kconfig that controls whether CBFS APIs for
unverified areas will allow file decompression when CBFS verification is
enabled. This should be disallowed by default because it exposes the
attack surface of all supported decompression algorithms. Make
allowances for one legacy use case with CONFIG_SOC_INTEL_CSE_LITE_
COMPRESS_ME_RW that should become obsolete with VBOOT_CBFS_INTEGRATION.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: Ieae420f51cbc01dae2ab265414219cc9c288087b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75457
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'SataPwrOptimizeDisable'.
Change-Id: I35b36f60d2f00bfad307dff7bd131c20ebccf60b
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75859
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'DisableSataSalpSupport'.
Change-Id: I4a68ffd2b68c92434da681b5e5567329c8784c72
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75858
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'PmicVdd2Voltage'.
Change-Id: I179b8f5b56c5bfe7f6fc3148e4c95954c0755ffd
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75857
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'ModPhyVoltageBump'.
Change-Id: Ic1e743e23bdfc45588411c584eecb839cc552faf
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75856
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'ModPhyIfValue'.
Change-Id: I4cdf68e65cea4ab316af969cd6a8d096b456518d
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75855
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'DisableComplianceMode'.
Change-Id: I9d5605134a753f161a66857c7f78844ae7490cd6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75854
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'PmicPmcIpcCtrl'.
Change-Id: I3632d1e83108221d3487b4f175133ad347238bc5
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75853
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For a unification of the naming convension, change from pascal case to
snake case style for parameter 'SataPortsHotPlug'.
Change-Id: I8fc8b30ac2c182ffaf2dee37e0116e27071b6a2c
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75852
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With commit f165bbdcf043 ("soc/intel/apollolake: Make SATA speed limit
configurable") came the expansion to adjust the SATA speed.
Unfortunately, APL FSP-S sets only the default value, so Gen 3, and
ignores the passing parameter value. Since the corresponding register
entry can only be changed once, the setting must be made on coreboot
side before FSP-S is called. This patch fixes the SATA speed
configuration for Apollo Lake CPUs.
Link to Intel Pentium and Celeron N- and J- series datasheet volume 2:
https://web.archive.org/web/20230614130311/https://www.intel.com/content/www/us/en/content-details/334818/intel-pentium-and-celeron-processor-n-and-j-series-datasheet-volume-2.html
BUG=none
TEST=Boot into Linux and check SATA configuration via dmesg
ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 3 Gbps 0x1 impl SATA
mode
ata1: SATA max UDMA/133 abar m2048@0x9872a000 port 0x9872a100 irq 126
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Change-Id: I6f55f40941fa618e7de13a5cefe9e17ae34c5c99
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75820
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Returning a constant value makes the function easier to read and think
about.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ifdf7acec38a7c958aac2cf1f3bbf16c27fa90b8c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75903
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The argument is copied into current and is never modified.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3084e43ccbe9749bc726af3120decfe8b52e1709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75902
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Enable DDI on ports 1 to 4 for Type-C DisplayPort.
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: I40f967b12b11c10a1a9329bfb42ebec5a8d7738f
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75579
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FSP performance timestamp is in nano second by default. This patch is to
correct unit in FSP performance timestamp data print and macro name to
avoid confusion.
Change-Id: I4aec4f63beddbd7ce6e8e3fc1b53a45da2ee0b00
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75816
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Loop over tables in xsdt instead of maintaining a list of local
variables to loop over. Some tables were not generated directly in the
write_acpi_tables function, like IVRS or SRAT. Now those tables are
printed too and the code is simpler.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ie0a6e2b6e2b72b5c8f59e730bea9b51007b507b6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75860
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch removes the support for edk2-stable202111 as MTL has migrated
to edk2-stable202302, and no other platform is utilizing
edk2-stable202111. The support for edk2-stable202111 is no longer
necessary.
Change-Id: Ide1864e0a42a4c0a81c3c94b1b1254f8fad062af
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75817
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move fw_config_is_provisioned() implementation to header file and make
it static inline.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I2ea21b19339cd93ba78dbe25213cbfb40e012937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This configures the SoC to flip the orientation of the AUX pins to
follow the orientation of the cable when using the anx7452 retimer. This
is necessary when there is no external retimer/mux or the retimer/mux
does not implement the flip. The anx7452 retimer does not appear to
support this feature, so let the SoC do the flip.
BUG=b:267589042,b:281006910
TEST=verified DP-ALT mode works on rex using both cable orientations
Change-Id: Ibb9f442d2afd81fb5dde4bca97c15457837f9f4a
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75827
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
USB3 is used for both typeA and WWAN based on different DB.
BUG=b:287159026
TEST=change FW config and check typeA and WWAN can work.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I5ad3973a9519350794a661ad00f71c0eb34edfba
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75819
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add the support RAM parts for gothrax.
Here is the ram part number list:
DRAM Part Name ID to assign
MT62F512M32D2DR-031 WT:B 0 (0000)
H58G56AK6BX069 1 (0001)
K3LKBKB0BM-MGCP 2 (0010)
BUG=b:284388714
BRANCH=None
TEST=emerge-nissa coreboot
Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com>
Change-Id: Ib16846f7b2061ee254db674ac7bac66c9b9f4e70
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75834
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
TCSS and TBT use the same lane on schematic. Update the port start
from 0 to match the Intel schematic. You can better follow the it
without convert the port number.
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ic6631dcbbd9f6c79c756b015425e2da778eb395e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75892
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
MTL FSP uses 202302 Edk2. select UDK_202302_BINDING Kconfig for MTL SoC.
BUG=b:261689642
TEST= Build and boot to Google/rex.
Change-Id: I9167e3b08a2a1fa2f4cc6ca11cb8308dc56fd940
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75728
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
edk2-stable202111 is older release of edk2. MTL FSP uses 202302 Edk2.
There are structure definition changes between 202111 and 202302. One of
change is in FSP_INFO_HEADER structure. Also, Next Gen Intel SoC needs
202302 Edk2.
This patch includes (edk2/edk2-stable202302) all required
headers for edk2-stable202302 EDK2 tag from EDK2 github
project using below command:
git clone -b edk2-stable202302 https://github.com/tianocore/edk2.git
commit hash: f80f052277c88a67c55e107b550f504eeea947d3
Only include necessary header files.
MdePkg/Include/Base.h was updated to avoid compilation errors
through safeguarding definitions for MIN, MAX, NULL, ABS, ARRAY_SIZE.
Add UefiCpuPkg/Include Because `MpServices2.h` file is part of
`UefiCpuPkg/Include/Ppi/`
Add following fixes from edk2-stable202111
060492ecd2 Safe guard enum macro in SmBios.h
2bf9599cf1 Use fixed size struct elements
BUG=b:261689642
TEST= select UDK_202302_BINDING Kconfig for MTL, Test Build and boot rex
Image
Change-Id: I8d4deab0bd1d2c6df28e067894875b80413cd905
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75663
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
- Disable devices in variant.c instead of adding probe statements to
devicetree because storage devices need to be enabled when fw_config is
unprovisioned, and devicetree does not currently support this. (it
disables all probed devices when fw_config is unprovisioned.).
- Removed `bootblock-y += variant.c` from Makefile.inc based on
CL:3841120.(The infrastructure for selecting an appropriate firmware
image to use the right descriptor is now ready so runtime descriptor
updates are no longer necessary.).
BUG=b:285477026
TEST=USE="project_joxer emerge-nissa coreboot"
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I6920d88dfec86676ff6733146f748e06d4085c49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75743
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
There are two baseboards within the set of mainboards built
here, with baseboard name appended in the filenames.
Take the style and variable BASEBOARD_DIR from google/brya,
then move and rename the supporting files under separate
directories.
Change-Id: I2046b6f82519540b8596ce925203bd60d1870c1c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74471
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update the initial USB PHY tuning values that were a copy of the ones
from the Chausie mainboard to the values used in the Birman UEFI
firmware reference implementation. The USB3 PHY tuning values are still
the same while some of the USB2 PHY tuning values are different. The
last two USB2 PHYs that are used by the USB4 controllers have a
different parameter set compared to the other USB2 PHYs.
TEST=All USB ports on Birman function as expected.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0ddfa2594d66b21582282ab8509c921a6e81a93f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75823
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add following config options.
1. TME_GENERATE_NEW_KEY_ON_WARM_BOOT
Program Intel TME to generate a new key for each warm boot. TME
always generates a new key on each cold boot. With this option
enabled TME generates a new key even in warm boot. Without this
option TME reuses the key for warm boot.
2. TME_EXCLUDE_CBMEM_ENCRYPTION
This option allows to exclude the CBMEM region from being encrypted
by Intel TME. When TME is enabled it encrypts whole DRAM. TME
provides option to carve out a region of physical memory to get
excluded from encryption. With this config enabled, CBMEM region
does not get encrypted by TME. If TME is not programmed to generate
a new key in warm boot, exclusion range does not need be programmed
due to the fact that TME uses same key in warm boot if
TME_GENERATE_NEW_KEY_ON_WARM_BOOT is not set. But if TME is
programmed to generate a new key in warm boot, contents of the CBMEM
get encrypted with a new key in each warm boot case hence, that leads
to loss of CBMEM data from previous warm boot. So enabling this
config allows CBMEM region to get excluded from being encrypted and
can be accessible irrespective of the type of the platform reset.
Bug=b:276120526
TEST=Able to build rex
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Change-Id: Id5008fee07b97faadc7dd585f445295425173782
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75625
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add additional ram parts and generate strapping ids.
BUG=b:285216975
TEST=Build myst image
Change-Id: I2b3b8c9ffcf81bbd2d6ecfad1b612fbf793857c8
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75821
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch disables the ACPI PM timer which is necessary for XTAL OSC
shutdown. Also, disabling ACPI PM timer switches off TCO.
BUG=b:274744845
TEST=Able to boot and verify S0ix is working even with EC reset and
cold boot scenarios.
w/o this cl:
> iotools mmio_read32 0xfe4018fc
0x0
w/ this cl:
> iotools mmio_read32 0xfe4018fc
0x2
Change-Id: Ibb6e145f67dba7270e0a322ef414bf1cb09c5eda
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Add support for Micron MT53E2G32D4NQ-046 WT:C LP4x DRAM.
BUG=b:216393391
TEST=build pass
Change-Id: I3797de01629fdb5ace4c610943d88db525da112b
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75826
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
It seems that using a wildcard (*) in the import path is not supported
in the context of the Makefile.
This to fix this error:
malformed import path "cmd/cbnt-prov/*.go": invalid char '*'
Change-Id: I953e06f1ff70a2b61bc5f505f7df9936b7f9b55b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75638
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch enables BT offload feature on Rex over SSP1.
BT mode is selected via FW_CONFIG and corresponding VGPIOs are
programmed.
BUG=b:275538390
TEST=Verified audio playback using BT speaker/headset in I2S mode on google/rex.
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I46e9702add37464122ffc78826ebf8a6c5b5b07c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72881
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Pujjo does not support GPIO based D-SAR,
so set GPP_D15 and GPP_H23 to NC.
BUG=b:275264095
TEST=boot on pujjo and no impact WWAN dynamic SAR function
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Change-Id: I4fe40b32a572a8d914e01e5cd7927766ccf17c02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75403
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Lay the groundwork to prepare for enabling PSP verstage. This change
adds PSP verstage callback to enable eSPI, TPM etc.
BUG=b:284984667
TEST=Build Myst BIOS image with PSP verstage enabled.
Change-Id: Ifc800e8bb27cc4c3fbccc2ab9f51138a7c4b03a6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75585
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add MaximumMemoryClockSpeed if FSP have it, otherwise pass 0.
TEST=check dmidecode dump the max speed.
Handle 0x000C, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x000A
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 16 GB
Form Factor: SODIMM
Set: None
Locator: Channel-0-DIMM-0
Bank Locator: BANK 0
Type: DDR5
Type Detail: Unknown Synchronous
Speed: 5600 MT/s
Manufacturer: Micron
Serial Number: 3f064d84
Asset Tag: Channel-0-DIMM-0-AssetTag
Part Number: MTC8C1084S1SC56BG1
Rank: 1
Configured Memory Speed: 5200 MT/s
Minimum Voltage: 1.1 V
Maximum Voltage: 1.1 V
Configured Voltage: 1.1 V
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: I854474bce8d6ed02f47f6dce8585b3ddfae73f80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75810
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In commit e59f18bf29a8 ("drivers/i2c: Add PI7C9X2G608GP PCIe switch
driver (pi608gp)"), there were some suggestions after it's been already
merged.
This patch addresses the points regarding the code style and comments.
BUG=none
TEST=Build OK, no behavioral changes in the pi608gp driver, console logs
without changes.
Change-Id: I5fc54708e0085fea4bd1f2fbf2afb400d2ccbd46
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In commit e59f18bf29a8 ("drivers/i2c: Add PI7C9X2G608GP PCIe switch
driver (pi608gp)"), there were some suggestions after it's been already
merged.
This patch addresses the points regarding the number types - fix of the
printk format strings, inclusion of 'stdint.h' and marking the set of
allowed values as constant.
BUG=none
TEST=Build OK, no behavioral changes in the pi608gp driver, console logs
without changes.
Change-Id: I34c664f6a8a257b260facdbf9043825ff4a4c932
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75500
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
Based on:
- Apollo Lake datasheet Vol. 3 Revision 005:
https://cdrdv2.intel.com/v1/dl/getContent/334819
- 7th Generation Intel Processor Families I/O for U/Y Platforms
Datasheet Vol.2 August 2017:
https://cdrdv2.intel.com/v1/dl/getContent/334659
- edk2-platforms source for Whitley and Purley platforms (Xeon SP)
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ic600d39d49135808dd1f571c9eff3cdb98682796
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Certain chipsets/SoCs like Apollo Lake use GEN_PMCON_B for periodic SMI
rate selection unlike other chipsets which use GEN_PMCON_A. Select
PERIODIC_SMI_RATE_SELECTION_IN_GEN_PMCON_B to indicate the register
difference.
Based on Apollo Lake datasheet Vol. 3 Revision 005:
https://cdrdv2.intel.com/v1/dl/getContent/334819
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: If182e1285ad6bd3f7c54760440010c50f57f7013
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72072
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Certain chipsets/SoCs like Apollo Lake use GEN_PMCON_B for periodic SMI
rate selection unlike other chipsets which use GEN_PMCON_A. Introduce new Kconfig option PERIODIC_SMI_RATE_SELECTION_IN_GEN_PMCON_B to
indicate the register difference.
Based on Apollo Lake datasheet Vol. 3 Revision 005:
https://cdrdv2.intel.com/v1/dl/getContent/334819
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I11241836ecc9066d323977b030686567c87ed256
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69870
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
This makes sure that the resource allocator won't use this address range
for anything else. In the systems I looked at, this was between the end
of the above 4GB memory and the beginning of the above 4GB PCI BAR MMIO
region, but better reserve it here so nothing else will get allocated
there if this expectation isn't met.
TEST=Reserved region is printed in the console logs:
update_constraints: PCI: 00:00.0 09 base fd00000000 limit fdffffffff mem (fixed)
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5a8150873cb019ca1d903ed269e18d6f9fabb871
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75611
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
It's been decided not to use the USB 3.0 port 1 on this board anymore,
so disable it also with the corresponding USB 2.0 lane.
BUG=none
TEST=USB 3.0 port 1 not functional anymore after boot, while others
continue working.
Change-Id: I2799e3d9d7232743c9480dd9611d94ed3249f53b
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75702
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch reduces the redundant config check to understand if an ISH FW
partition is available and to fetch the ISH FW version.
The goal is to fetch the ISH FW version if the ISH FW belongs to the CSE
firmware partition table.
Change-Id: I689a71377e7aea0fa3bc1835f355708c33c2caea
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75811
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch calls get CSE RW version function from .final hook if
the platform has required config (`SOC_INTEL_CSE_LITE_SKU`) selected.
BUG=b:280722061
TEST=Able to build and boot google/rex.
> cbmem -c | grep "CSE RW Firmware Version:"
[DEBUG] CSE RW Firmware Version: 18.0.0.1682
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ifdb82c180b64fbb4575932427be54f544e1c98d4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75749
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch renames `cse_store_rw_fw_version` function that store
currently running CSE RW FW version inside CBMEM.
Additionally, perform the CSE RW FW storing operation unconditionally.
TEST=Able to build and boot google/marasov.
Change-Id: Iba85807b7d9e6f067b5b628c6fa062fab5c485e0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75768
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch renames `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` config
to `SOC_INTEL_STORE_ISH_FW_VERSION` to ensure the usage of this config
is clear.
Any platform would like to fetch the currently running ISH firmware
version should select this configuration.
TEST=Able to build and boot google/marasov.
Change-Id: Ie503d6a5bf5bd0d3d561355b592e75b22c910bf5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75767
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Boxy audio codec chip uses ALC5682I-VD, not ALC5682I-VS.
It needs to modify codec HID to "10EC5682" in coreboot to fix audio no
output sound issue.
BUG=b:286970886
BRANCH=dedede
TEST=confirm audio soundcard can be list by command "aplay -l"
Change-Id: Icd69a9d757ba817b586a703a17375682db684224
Signed-off-by: Kevin Yang <kevin3.yang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This patch enables adding variant specific ASL code
TEST=Kernel driver is able to communicate with device
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: I231482d56dd4afa150766c07cfde105158e5e124
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74886
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add driver to support ELAN touchscreen using SPI for rex
* See "HID Over SPI Protocol Specification" section 5.2 - ACPI enum
* https://www.microsoft.com/en-us/download/details.aspx?id=103325
BUG=b:278783755
TEST=Kernel driver is able to communicate with device. Also tested
S0ix, ran 'suspend_stress_test -c 1' - no issues in suspend/resume.
Signed-off-by: Eran Mitrani <mitrani@google.com>
Change-Id: Id51d385ce350cef23da4184b044c74569f4dd3f0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74885
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Update all the required sources to lay the ground work to enable PSP
verstage.
BUG=b:284984667
TEST=Build Myst BIOS image with PSP verstage enabled.
Change-Id: I6fbb1f835ac2ad6ff47f843321e1bd380af7ce33
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75584
Reviewed-by: Tim Van Patten <timvp@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Alder Lake-S 2+0 SKUs and 35W SKUs have 20A GT TDC, all other Alder
Lake-S SKUs have GT TDC of 22A.
Based on the default settings of ADL-S FSP.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie6851d322fc9354d019a76503c3d35b5e6eca48b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72998
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
In soc/amd this function is unused so drop it and rename
_acpi_fill_ivrs_ioapic().
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic403fd84cb9cd5805fbc6f0c5a64cefbf4b0cd81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
|
|
By adding all DXIO IOAPIC with the same resource index, the IVRS code
can always pick that resource which simplifies the code.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I10345e2337dcb709c2c1a8e57a1b7dd9c04adb9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
|
|
Sometimes systems don't boot to the OS due to wrong ACPI tables.
Printing the tables in an ACPICA compatible format makes analysis of
ACPI tables easier.
The ACPICA format (acpidump, acpixtract) is the following:
"
FACS @ 0x0000000000000000
0000: 46 41 43 53 40 00 00 00 E8 24 00 00 00 00 00 00 FACS@....$......
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
"
To achieve analyze ACPI tables capture the coreboot log between
"Printing ACPI in ACPICA compatible table" and "Done printing ACPI in
ACPICA compatible table". Remove the prefix "[SPEW ] " and then call
'acpixtract -a dump' to extract all the tables. Then use 'iasl -d' on
the .dat files to decompile the tables.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I7b5d879014563f7a2e1f70c45cf871ba72f142dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75677
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Time elapsed for a single board build with ccache typically measures
well below 10 seconds. Improve the measurements to milliseconds
resolution using bash EPOCHREALTIME (pseudo) environment variable.
Change-Id: Iaedc470bb45cf9bb6f14ff8b37cd6f7ae3818a08
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
One specific Hynix LPDDR5x DRAM part requires an ABL workaround to
eliminate DRAM-related failures during a FAFT test, but due to the
use of generic/common SPDs, there is no way for the ABL to determine
the DRAM part # itself.
Consequently, we will have coreboot check the DRAM part #, and set/clear
a CMOS bit as appropriate, which the ABL will check in order to apply
(or not apply) the workaround.
The ABL already uses byte 0xD of the extended CMOS ports 72/73 for
memory context related toggles, so we will use a spare bit there.
BUG=b:270499009, b:281614369, b:286338775
BRANCH=skyrim
TEST=run FAFT bios tests on frostflow, markarth, and whiterun without
any failures.
Change-Id: Ibb6e145f6cdba7270e0a322ef414bf1cb09c5eaa
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75698
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
|
|
Add a Dockerfile for Alpine to build-test with musl-libc.
Change-Id: If90412146acc94f01a89cd681539aad48e92dd2e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
|
|
"current" points to the start of HEST table, so "next - current" already
includes the size of its header, no need for increment here. This issue
was found on SPR-SP platform. The length of HEST table is now correct
with this patch.
Change-Id: I6ff1e8e24612b7356772d582ff9a7e53863419db
Signed-off-by: Jeff Li <lijinfeng01@inspur.com>
Signed-off-by: Ziang Wang <ziang.wang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75738
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
On nissa, the ISH is running closed source firmware, so the ChromeOS
security requirements specify it must be behind an IOMMU. Add
DmaProperty to the ISH _DSD on joxer.
BUG=b:285477026
TEST=Kernel marks ISH (PCI device 12.0) as untrusted, and changes the
IOMMU group type to "DMA". Also, device still goes to S0i3.
Before:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
0
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA-FQ
After:
$ cat /sys/devices/pci0000\:00/0000\:00\:12.0/untrusted
1
$ ls /sys/kernel/iommu_groups/5/devices
0000:00:12.0
0000:00:12.7
$ cat /sys/kernel/iommu_groups/5/type
DMA
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I69b00f0281f4493db157783840d9cdcbb138017f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75758
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add default Intel DPTF.
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: Ib023f6d6d184f6935a6a454250755502a46b707f
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75580
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
+-------------+----------------+------------+---------------------------------+
| PCH USB 2.0 | Connector Type | OC Mapping | Remarks |
+-------------+----------------+------------+---------------------------------+
| 1 | Type-C | OC_0 | Type C port - TCP1 |
| 2 | Type-C | OC_0 | Type C port - TCP0 |
| 3 | Type-C | OC_0 | Type C port - TCP2 |
| 4 | Type-A | OC_3 | USB3.2 Gen2x1 Type-A Port – TAP0|
| 7 | Type-A | OC_3 | TAP1 |
| 8 | Type-A | OC_3 | TAP2 |
| 9 | Type-A | OC_3 | TAP3 |
+-------------+----------------+------------+---------------------------------+
+---------------------+-------------------+------------+---------+
| PCH USB 3.1 Gen 2x1 | Connector Details | OC Mapping | Remarks |
+---------------------+-------------------+------------+---------+
| 1 | Type-A | OC_3 | TAP0 |
| 2 | Type-A | OC_3 | TAP1 |
+---------------------+-------------------+------------+---------+
+------+-------------------+------------+-----------------------------+
| TCPx | Connector Details | OC Mapping | Remarks |
+------+-------------------+------------+-----------------------------+
| 1 | Type C port 0 | OC_0 | To onboard Type-C connector |
| 2 | Type C port 1 | OC_0 | To onboard Type-C connector |
| 3 | Type C port 2 | OC_0 | To onboard Type-C connector |
+------+-------------------+------------+-----------------------------+
BUG=b:274421383
TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis
Change-Id: Icc81f12ec6cc4af37bcc1fcf3164cbfa5612a443
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75578
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
When fw_config is unprovisioned, devicetree will disable all probed
devices. However, boot-critical devices such as storage devices need to
be enabled.
As a temporary workaround while adding devicetree support for this,
remove the fw_config probe for storage devices so that all storage
devices are always enabled. On eMMC SKUs, UFS and ISH will be disabled
by the PCI scan anyway. On UFS SKUs, eMMC is not disabled by the PCI
scan, but keeping it enabled should have no functional impact, only a
possible power impact.
BUG=b:285477026
TEST=On joxer eMMC and UFS SKUs, boot to OS and
`suspend_stress_test -c 10`
Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com>
Change-Id: I834bd81ce636a6f32d50434cbf07b1d572620492
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75757
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This fixes format string vulnerability issues with snprintf statement
found by klocwork scan.
Foundby=klocwork
BUG=NONE
TEST=Boot to OS on Meteor Lake rex platform and run klocwork scan.
Check related ACPI tables and modem driver behavior after changes.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ia6b7d70c0b2b86d0918e58348dccd206a7ee9193
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75733
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds UPD entries into the FSP header file to configure VRs
(IA, GT and SA).
- `IccLimit` : VR Fast Vmode ICC Limit support
- `EnableFastVmode` : Enable/Disable VR FastVmode
- `CepEnable` : Enable/Disable CEP (Current Excursion Protection
BUG=b:286809233
TEST=Able to build google/rex.
Change-Id: I477ab7e4c07156759962bd2eab9dff28a0a3f006
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75761
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
PCIE_RST_L is attached to a pull down, change the init to NC.
BUG=None
TEST=Boot to OS
Change-Id: I3f7a548a33eb18327139f033d7c0d6a1843f1639
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75700
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update PCIe GPIOs during rom stage to properly initialize the
PCIe devices and allow the NVMe/eMMC to be properly detected.
BUG=b:284213391
TEST=Boot to OS
Change-Id: I24ad6c1addedb414afade2512b6628022d000a47
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75699
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Rename get_smee_reserved_address_bits to get_sme_reserved_address_bits
since the feature is called secure memory encryption and the last 'e' in
SMEE bit in the SYSCFG MSR just stands for enable. The function will
return a valid number of reserved address bits no matter if this is
enabled or not, so drop the second 'e'.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3795f7a861e39cb6c8209fee10191f233cbcd308
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75766
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Move the WP signal to GPP_E12 from the current GPP_E15 to
match the design.
BUG=b:285084125
TEST=WP signal reports as we expect
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I8772173fcdcabf78b0c7d605cd495ebe04b63242
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Some references are pointing to non-existing paths. Fix that.
Change-Id: I298370c69edc41a50c859684cc5a2c1dbfc85559
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75800
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I4cffd141ef74e20ef13b204955b44c07acd88edf
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75805
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add support for Micron MT53E2G32D4NQ-046 WT:C LP4x DRAM.
BUG=b:216393391
TEST=build pass
Change-Id: I8c66a18fd94d9a013710fbc6dc7f1533d808392e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75745
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Currently the data to be put to cache region is 0x14FF90. With the
limit size 0x150000, the data for S3 can not be put into. So we expand
it a little.
Change-Id: If6b03b713059c54c7dae8f2db0f6426d8aa1aab1
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69782
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This is a complete rewrite of the UHCI root-hub driver, based on
the xHCI one. We are doing things by the book as far as possible.
One special case is uhci_rh_reset_port() which does the reset se-
quencing that usually the hardware would do.
This abandons some quirks of the old driver:
* Ports are not disabled/re-enabled for every attachment anymore.
* We solely rely on the Connect Status Change bit to track changes.
* Further status changes are now deferred to the next polling round.
The latter fixes endless loops in combination with commit 7faff543da
(libpayload: usb: Detach unused USB devices).
Change-Id: I5211728775eb94dfc23fa82ebf00fe5c99039709
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75504
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The original clock rate 416MHz is insufficient for 4K resolution and
causing the screen to glitch. Set the clock rate to 594MHz to support
4K resolution.
BUG=b:236328487
TEST=Glitching screen was fixed after applying this patch
Change-Id: Ic40dd28264d03ef7218ff4edd8d4182e0fe74ea3
Signed-off-by: Hsiao Chien Sung <shawn.sung@mediatek.com>
Signed-off-by: Jason Chen <Jason-ch.Chen@mediatek.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75661
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Define a CMOS layout for Librem Mini v1/v2 spanning both banks. The
only setting provided is the automatic power-on setting, which is
implemented by the EC. This can now be configured in a firmware image
by replacing cmos.default in CBFS.
Since cmos.default is applied early in bootblock, the EC BRAM interface
must now be configured in bootblock, including opening the LPC I/O
range.
Change-Id: Ib0a4ea02d71f6f99e344484726a629e0552e4941
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74363
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Geralt SoC does not support 'persist certain regions' across reboots.
Considering the impact of missing ramoops for debugging, set
MEDIATEK_DRAM_SCRAMBLE to default n to disable this feature in
production FW image.
BUG=b:269049451,b:278478563
TEST=emerge-geralt coreboot and confirm CONFIG_MEDIATEK_DRAM_SCRAMBLE=n
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: I109634d811a928e3e6f7f56e706a5b61a52a21ab
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75562
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix a typo in an enum type name, "PIM2_MI" -> "SPIM2_MI".
TEST=emerge-cherry coreboot
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Change-Id: Ib43a044dc69a93ad1dcaa5e65c66a82046a40777
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75726
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ieca5d8d175923f690ebfa3108e393e029ea97c80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Enable ILI2901 and eKTH7B18 touchscreen for Google Screebo.
BUG=b:278167967
BRANCH=none
TEST=Build and boot to Google Screebo. Verify touchscreen works.
Change-Id: I57d55c5f2621d6fafd53b19d12ecad20271cdbb1
Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com>
|
