summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-29soc/amd/picasso: add NULL-pointer check to root_complex_fill_ssdtFelix Held
Found-by: Coverity CID 1429980 Change-Id: Ia72b9dbe029a5da98e408a9cf16fa4a93b10917a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42846 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-29mb/amd/mandolin: make mandolin a variant of itselfFelix Held
A follow-up patch will add Cereme which is a Mandolin variant. Beware that the name of the EC firmware image is changed from mchp.bin to EC_mandolin.bin. TEST=Mandolin still boots into Linux live system. Change-Id: Ifee91306756f8a4152a6a0224e172dae7eac8f7a Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42785 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29soc/amd/picasso/soc_util: add comment on the silicon and soc typesFelix Held
Change-Id: I71704ab292edf8bd343370e6b72c47a8f3aceffd Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-29mb/lenovo/{x230, x230s}: Disable SuperSpeed capabilities for WWAN USBBill XIE
Although on ThinkPads with Panther Point PCH the usb port inside wwan socket is usually wired to XHCI, it has actually no SuperSpeed lines, so maybe it is okay to disable SuperSpeed capabilities, and wire them to EHCI #2 by making use of XUSB2PRM and USB3PRM. This applies to both variants of x230. Change-Id: Ia8d27be84e4dbfa0efed506b9fc010e7f4d6ba23 Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41505 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29mainboard/lenovo/x230: Add ThinkPad x230s as a variantBill XIE
The code is based on autoport and that for X230. Major differences are: - Only one DDR3 slot - HM77 PCH - M.2 socket instead of mini PCIe - No docking - No TPM Tested: - CPU i5-3337U - 8GiB SO-DIMM - Camera - PCIe and USB2 on M.2 slot with A key for WLAN - SATA and USB2 (no SuperSpeed components) on M.2 slot with B key for WWAN - On board SDHCI connected to PCIe - USB3 ports - libgfxinit-based graphics init - NVRAM options for North and South bridges - Sound - ThinkPad EC - S3 - Linux 4.9 within Debian GNU/Linux stable, loaded from SeaBIOS. Untested: - Touch screen, which is said to work under ubuntu but not debian. Change-Id: Id59cdc5479aaf70809dd1ca613056263661455eb Signed-off-by: Bill XIE <persmule@hardenedlinux.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41390 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29soc/amd/common: Refactor GPIO SCI/SMI interruptsKyösti Mälkki
Change-Id: Ib2c7cd70ab38d0d8e745b0a611b780d2b0b8dc5b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-29soc/amd/common: Refactor GPIO_MASTER_SWITCH interrupt enableKyösti Mälkki
There is no GPIO_63 but the register position is used for interrupt controls. Change-Id: I754a2f6bbee12d637f8c99a9d330ab0ac8187247 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42686 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29soc/amd/common: Drop ACPIMMIO GPIO bank separationKyösti Mälkki
The banks are one after each other in the ACPIMMIO space. Also there is space for more banks and existing ASL takes advantage of the property. Change-Id: Ib78559a60b5c20d53a60e1726ee2aad1f38f78ce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42522 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-29soc/intel/tigerlake: Run pmc_set_acpi_mode() during .init in pmc_opsWilliam Wei
pmc_set_acpi_mode() should run after Chrome EC dealt with all host event bits, like SMI mask (otherwise the FAFT firmware_FWScreenCloseLid test will fail). BUG=b:153249055 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Change the GBB flag to 0x140 then check SMI mask during depthcharge phase, make sure it's 0x0000000000000001. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: Icfff5cc5550f23938343e4d26ef76093bb9cf7c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42677 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28vendorcode/intel/fsp/fsp2_0/cpx_sp: Update to FSP ww24 release and adapt socJonathan Zhang
The previous Intel CPX-SP FSP release was ww20 release. The ww22 release fixs issues related to FSP_NV_STORAGE HOB. The end of end flow of using memory training data to generate FSP_NV_STORAGE HOB and using memory training data passed from bootloader to skip memory training, works now. This saves 8 minutes of boot time (with FSP verbose logging enabled on DeltaLake server). This release also adds UPD parameters to support IIO bifuration. The ww24 release has following updates: a. Removed a number of unnecessary UPD parameters, such as mmiolSize, mmiolBase, OemHookPostTopologyDiscovery, OemGetResourceMapUpdate. b. Added UPD parameters to support PCIe ports configuration. c. Updated IIO_UNIVERSAL_DATA HOB, each stack now has mmio base/limit fields, in addition to PCIe resource memory base/limit fields. With ww24 release, the issue with PCIe link training persists. On YV3 config A, the onboard NIC card has x4 connection to port 2D. This NIC device is not recognized by FSP. Corresponding soc/intel/xeon_sp/cpx change is made: * There are changes in PLATFORM_DATA structure, so hob_display.c is updated. * There are changes in UPD parameters, so romstage.c is updated. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I70762b377a057d0fca7806f485cce8d479fb5baa Reviewed-on: https://review.coreboot.org/c/coreboot/+/41903 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28libpayload/cbgfx: Fix overflow in transform_vector()Yu-Ping Wu
Fix potential overflow when multiplying integers in transform_vector(). This issue is causing the absolute coordinate of the bottom right corner of the box to be incorrectly calculated for draw_rounded_box(), which is used in menu UI to clear the previous screen. In addition, check the lower bound in within_box(). BRANCH=none BUG=b:146399181, b:159772149 TEST=emerge-puff libpayload TEST=Previous screen is cleared properly for menu UI Change-Id: I57845f54e18e5bdbd0d774209ee9632cb860b0c2 Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42770 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28soc/amd/common: Allow runtime mapping of ACPIMMIO banksKyösti Mälkki
Future implementation of verstage running on PSP will have access to some of the ACPIMMIO banks, but banks will be mapped runtime at non-deterministic addresses. Provide preprocessor helpers to accomplish this. Change-Id: I8d50de60bb1ea1b3a521ab535a5637c4de8c3559 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Martin Roth <martinroth@google.com>
2020-06-28soc/amd/common: Access ACPIMMIO via proper symbolsKyösti Mälkki
Using proper symbols for base addresses, it is possible to only define the symbols for base addresses implemented for the specific platform and executing stage. Change-Id: Ib8599ee93bfb1c2d6d9b4accfca1ebbefe758e09 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28AGESA fam14: Use AMD_ACPIMMIO_GPIO_BASE_100Kyösti Mälkki
Use the pre-defined constant address directly. Change-Id: I29fbc82fffc69b864adb4ddbda1425db98e2e48a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28mb/google/zork: update DRAM SPD table for berknipKevin Chiu
samsung-K4A8G165WC-BCWE_x1 # 0b0101 micron-MT40A1G16KD-062E-E_x2 # 0b0110 hynix-H5ANAG6NCMR-XNC_x2 # 0b0111 samsung-K4AAG165WA-BCWE_x2 # 0b1000 BUG=b:159418772 BRANCH=master TEST=emerge-zork coreboot Change-Id: I24b632c75d4a0660dc6beb88f135b546860d7079 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42814 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28smbios: Add option VPD_SMBIOS_VERSION that reads BIOS version from a VPD ↵Johnny Lin
variable If VPD_SMBIOS_VERSION is selected, it would read VPD_RO variable that can override SMBIOS type 0 version. One special scenario of using this feature is to assign a BIOS version to a coreboot image without the need to rebuild from source. VPD_SMBIOS_VERSION default is n. Tested=On OCP Delta Lake, dmidecode -t 0 can see the version being updated from VPD. Change-Id: Iee62ed900095001ffac225fc629b3f2f52045e30 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: insomniac <insomniac@slackware.it> Reviewed-by: Julius Werner <jwerner@chromium.org>
2020-06-28soc/intel/common: add TCC activation functionalitySumeet R Pawnikar
This enables to configure the Thermal Control Circuit (TCC) activation value to new value as tcc_offset in degree Celcius. It prevents any abrupt thermal shutdown while running heavy workload. This helps to take early thermal throttling action before CPU temperature reaches maximum operating temperature TjMax value. Also, cleanup local functions from previous intel soc specific code base like for apollolake, broadwell, skylake and cannonlake. BUG=None BRANCH=None TEST=Built for volteer platform and verified the MSR value. Change-Id: I37dd878902b080602d70c5c3c906820613ea14a5 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-28mb/google/zork: update telemetry settings for berknipKevin Chiu
update telemetry to improve the performance. BUG=b:154879805 BRANCH=master TEST=emerge-zork coreboot verify by Stardust test Change-Id: Iae5486cf2ee26b3d8e6124edfff4fe2d1fbe211e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42817 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28mb/google/zork: add G2 TS support for berknipKevin Chiu
Add G2 GTCH7503 HID TS support BUG=b:159510906 BRANCH=master TEST=emerge-zork coreboot boot with G2 TS, make sure G2 TS is functional Change-Id: Id9ed5fc768459edc4660ddd6fbffb0b1973ce6d1 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42813 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-28mb/google/zork: update telemetry settings for morphiusKevin Chiu
update telemetry to improve the performance. BUG=b:154863613 BRANCH=master TEST=emerge-zork coreboot Change-Id: Ia08259e81f360259f23ea0f9c5c128c9d0961322 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42815 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28mb/google/zork: update DRAM SPD table for morphiusKevin Chiu
Add Samsung K4A8G165WC-BCWE x2 BUG=b:159418770 BRANCH=master TEST=emerge-zork coreboot Change-Id: I200a1074d3c9fe79a8a2c69f42b0612e745f36f5 Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28mb/google/reef/variants/: add Samsung K4F8E3S4HD-MGCL supportKevin Chiu
Add Samsung K4F8E3S4HD-MGCL DRAM support. DRAMID: 0x8 BUG=b:145094527 BRANCH=master TEST=emerge-snappy coreboot chromeos-bootimage Change-Id: Ic450c4abebfeaed050a7b8fcae74b87a148dd5cd Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-28Makefile.inc: Simplify fsp submodule checkAngel Pons
TEST=Building Asrock H110M using FSP from repo updates the submodule. Change-Id: I25023af88d878353a04db456009249da67e41521 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-28soc/xeon_sp/cpx: Define MSR PPIN related registersJohnny Lin
These changes are in accordance with the documentation: [*] page 208-209 Intel(R) 64 and IA-32 Architectures, Software Developer’s Manual, Volume 4: Model-Specific Registers. May 2019. Order Number: 335592-070US Tested on OCP DeltaLake with change https://review.coreboot.org/c/coreboot/+/40308/ Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I87134b2e98c9b0c031be9375b75a2aa1284ae9bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/41278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-06-28drivers/ipmi: Read more FRU data fields for Product and Board InfoJohnny Lin
Tested on OCP Tioga Pass Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: Ib05fdb34b2b324b6eb766de15727668ce91d2844 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40522 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28mb/google/faffy: Enable USB2 port6Tim Chen
Due to faffy has PL-2303 connect to USB2 port6(count from port0), needs to enable it. BUG=b:159760559 BRANCH=None TEST=emerge-puff coreboot chromeos-bootimage boot on puff board Change-Id: Icc805757b043e7fac4d05188cbf2f9c9c56c2a2e Signed-off-by: Tim Chen <tim-chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-06-28mb/amd/mandolin: factor out eMMC GPIO pin mux setupFelix Held
This also makes the calling of the eMMC GPIO mux setup function conditional on PICASSO_LPC_IOMUX instead of AMD_LPC_DEBUG_CARD which only makes the selection of PICASSO_LPC_IOMUX user-configurable. Change-Id: Ic49a668f82fbc1b851c07d312b543d2889fe4734 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42842 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-28mb/amd/mandolin: factor out port descriptors from mainboard.cFelix Held
Change-Id: Ia2101cc0bae0d68cea1954424d18833aa22670c6 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42784 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28soc/amd/picasso/soc_util: rework reduced I/O chip detectionFelix Held
Both Dali and Pollock chips have less PCIe, USB3 and DisplayPort connectivity. While Dali can either be fused-down PCO or RV2 silicon, Pollock is always RV2 silicon. Since we have all boards using this code in tree right now, soc_is_dali() can be renamed and generalized to soc_is_reduced_io_sku(). Change-Id: I9eb57595da6f806305552128b0c077ceeb7c4661 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42833 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Rob Barnes <robbarnes@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
This change allows mainboard to configure different wakeup routes that can be used by a GPIO key: 1. SCI: This is selected when SCI route is used to wake the system. It results in _PRW property being exposed in ACPI tables. 2. GPIO IRQ: This is selected when GPIO controller wake is used to wake the system. It is typically used when the input signal is not dual routed and the GPIO controller block is not capable of applying filters for IRQ and wake separately. In this case, _PRW is not exposed in ACPI tables for the key device. 3. Disabled: No wakeup supported. Based on these wakeup routes, gpio_keys_add_child_node() is updated to expose _PRW and _DSD properties for wakeup appropriately. Additionally, the change updates mainboards that were already using gpio_keys to set wakeup_route attribute correctly and renames "wake" to "wake_gpe" to make the usage clear. BUG=b:159942427 Change-Id: Ib32b866b5f0ca559ed680b46218454bdfd8c6457 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-27sb/intel/i82801jx: Use pmutil.h definitionsAngel Pons
Also drop now-redundant definitions and include headers where needed. Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical. Change-Id: I2fb46bb04d96df5e8261f49e0fd4d88eedca6084 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42659 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/i82801ix: Use pmutil.h definitionsAngel Pons
Also drop now-redundant definitions and include headers where needed. Tested with BUILD_TIMELESS=1, Roda RK9 remains identical. Change-Id: I3ddd133a4e81a7f6ce9c33ce227b40006a0d1850 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42658 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/i82801jx: Drop `p_cnt_throttling_supported`Angel Pons
The three mainboards using this southbridge do not support it. Change-Id: I006f1ec26c40f7e2dfc2ddedb017278455368bb9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42655 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/i82801ix/fadt.c: Use pmutil.h definitionsAngel Pons
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical. Change-Id: Ib4cdeaaaf75818fff21acb628d198781b07aec80 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42654 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/i82801jx/fadt.c: Use pmutil.h definitionsAngel Pons
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical. Change-Id: I572a9da0cba5d23c48c4cb06de4bb75f65f5b0b0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ron minnich <rminnich@gmail.com>
2020-06-27sb/intel/i82801gx/fadt.c: Align with i82801ixAngel Pons
Tested with BUILD_TIMELESS=1, Getac P470 remains identical. Change-Id: I930de15a6746936fa4a8f6db280b5ac60176c836 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-06-27sb/intel/i82801gx/fadt.c: Reorder statementsAngel Pons
Change the order of the assignments to match that of i82801ix. This changes the binary but the effective result should be the same. Change-Id: Id720fce40e751295e629585d34017f10af2b5c7c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42651 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/i82801gx: Move `acpi_fill_fadt` to fadt.cAngel Pons
At least i82801ix and i82801jx do this. Change-Id: I7ff2459d82eb7933ed80180a69f0f323b8ecd25f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-06-27sb/intel/i82801jx/fadt.c: Align with i82801ixAngel Pons
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical. Change-Id: I13b972440459a62777ee2a4688d1d8af147d8921 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-27sb/intel/i82801jx/fadt.c: Reorder statementsAngel Pons
Change the order of the assignments to match that of i82801ix. This changes the binary but the effective result should be the same. Change-Id: Ib190781f26f82f339eaf8039de459376ac0e3a5e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42639 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-27sb/intel/i82801jx: Move `acpi_fill_fadt` to fadt.cAngel Pons
At least i82801ix does this. Change-Id: Ic555ab17c2eca0399938d2842ca51628899c1544 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42637 Reviewed-by: Christian Walter <christian.walter@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27mb/emulation/qemu-q35: Use common early SPI codeAngel Pons
Tested, it still boots. It is unknown whether this has any effect on emulated hardware, which is most likely not emulating SPI transfers. Change-Id: I44397c46dc0715697ca8680f418888804e4ea7e4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-27soc/intel/broadwell: Use common early SPI codeAngel Pons
Change-Id: Ifd0e8e6d8169a762a4d17839c3fd7b7e5493a344 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42667 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-27sb/intel/lynxpoint: Use common early SPI codeAngel Pons
Change-Id: I6c6fbed077d2f169736aee77af3783c847cf3a06 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42666 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-27sb/intel/ibexpeak: Use common early SPI codeAngel Pons
Change-Id: Ib8cba1ae4fc269c925418965acf6956c1bfe0f79 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-27sb/intel/i82801jx: Use common early SPI codeAngel Pons
Change-Id: If9efbde5939913b67852b377dd84cd4de1ec2718 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42664 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-27sb/intel/i82801ix: Use common early SPI codeAngel Pons
Change-Id: Iafcf7aecb20b4c8be79fa562ff267fd54f672862 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42663 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-27sb/intel/i82801gx: Use common early SPI codeAngel Pons
Change-Id: I44de4698d062508dd24f37b37014e09d95726c71 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-27sb/intel/bd82x6x: Use common early SPI codeAngel Pons
Change-Id: If4843e93c993ed2de60b2b6064c2c9e98637ce9a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42661 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-27sb/intel/common: Add early SPI codeAngel Pons
All Intel southbridges with SPI perform this write. Put it inside a function in common code. Use a different name to avoid a name clash. As it is only one statement, make it inline so that it can be defined on the header itself. It is only called once per southbridge anyway. Change-Id: I3c284d6cffd22949d50b4c4f9846ceaef38d7cda Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-26Revert "Mushu: Enable PCIe 1d.4 to enable dgpu"Shelley Chen
This reverts commit 1408798637125f1707ded7215e22461c623a79a8. Reason for revert: Causing backlight issues in device. Will reland after more debugging to figure out the root cause. BUG=b:159370566 BRANCH=None TEST=boot up device and make sure when kernel is booted, backlight comes up. Change-Id: I643854c6c805d262539bbb482808e8c322059a49 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2020-06-26soc/rockchip: Use (Q) instead of @Stefan Reinauer
This way make V=1 will tell you what it's actually doing. Change-Id: I096bc2419e47a0b2a2454a792059464b27158cd9 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42818 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-26mb/mandolin/devicetree: clarify that Ethernet devices are internal MACsFelix Held
Change-Id: Ib7d696f4cc8f5fdcdf45e271b36664d085eb16d5 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42834 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-26mb/amd/mandolin/devicetree: disable unused internal ethernet controllersFelix Held
Change-Id: Id4c7ec02f37b35bbc36d40bb937b962cc6413d17 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42782 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-26Fix up Docker paths to match jenkins nomenclatureStefan Reinauer
Jenkins is calling its build nodes "agent". Reflect that in the path names we use in configuration. Change-Id: I88a4d3d32a565ade768e3de6428f46d355bedfb2 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42819 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-26mb/google/zork/Kconfig: remove unused option IRQ_SLOT_COUNTFelix Held
That option is only relevant if the boards selects HAVE_PIRQ_TABLE which it doesn't. Change-Id: Ib5839a42f5133f5f84e1e1e4e587801b916ca571 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-26mb/amd/mandolin/devicetree: add comment about chip behind GPP bridge 3Felix Held
Change-Id: Ie1fcfb18a3ccf08c62210eec07d8965696f11da9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42783 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-26mainboard/prodrive/hermes: Enable EIST in DeviceTreeChristian Walter
Enable EIST option in the devicetree in order to make Windows aware of using Intel CPU Turbo Technology. Change-Id: Ied3d7e934fcab2d5d491573245d68d392df5ba34 Signed-off-by: Christian Walter <christian.walter@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-06-26mb/google/hatch: Set Reset Power Cycle Duration for hatch platformsSridhar Siricilla
Currently, Reset Power Cycle Duration is set with default value (4s). This adds around ~5 seconds of delay during power cycle or global reset. So, this patch sets PchPmPwrCycDur (Reset Power Cycle Duration) to 1s to minimize the delay. Delay with Power Cycle or Global Reset: Existing behaviour: S0->S5 -> [ ~5 seconds delay ] -> S5->S0 With the patch: S0->S5 -> [ ~2 seconds delay ] -> S5->S0 Also, correct the comment mentioned for PchPmSlpAMinAssert. The value(3) defined for PchPmSlpAMinAssert triggers signal assertion width to 98ms not 2s. Test=Verified on Hatch and Puff boards BUG=b:158634281 Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I368c6716a92e06903a872f9e87ae0698eab95bdd Reviewed-on: https://review.coreboot.org/c/coreboot/+/42441 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/volteer: Enable HECI interfaceJamie Ryu
This is to enable Intel ME communication interface HECI1 by devicetree for PAVP with CSE Lite. BUG=b:159615125 TEST=Build and boot volteer. Run lspci and check pcie device 00:16.0 Communication controller: Intel Corporation Device a0e0 Change-Id: I68eb51c6a0af77982c060767993265764a2bc926 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42308 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-06-25mb/amd/mandolin: remove unused option IRQ_SLOT_COUNTFelix Held
That option is only relevant if the boards selects HAVE_PIRQ_TABLE which it doesn't. Change-Id: I76c098c7029ed9d797f6c4fb016eaa18854fadd3 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42781 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-25mb/amd/mandolin: add missing Kconfig type to CBFS_SIZE optionFelix Held
Change-Id: Ia4226537d17bb3732086980fb4e8de6bd1eaedbb Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-25Revert "soc/amd/common/block/acpimmio: Update acpimmio for psp_verstage"Kyösti Mälkki
This reverts commit 4883252912665f56c8e7801fe03a26594a1e9d5d. Almost everything in <amdblocks/acpimmio_map.h> is invalid for PSP as it does not have the same view of memory space. The prototypes xx_set/get_bar() are only valid for PSP as x86 cores will use the constant mapping defined in <amdblocks/acpimmio_map.h> The selected MMIO base address model depends of the architecture the stage is built for and, to current knowledge, nothing else. So the guards should have been with ENV_X86 vs ENV_ARM and not about CONFIG(VERSTAGE_BEFORE_BOOTBLOCK). For the ENV_ARM stage builds, <arch/io.h> file referenced in the previously added mmio_util_psp.c file has not been added to the tree. So there was some out-of-order submitting, which did not get caught as the build-testing of mixed-arch stages has not been incorporated into the tree yet. The previously added file mmio_util_psp.c is also 90% redundant with mmio_util.c. Change-Id: I1d632f52745bc6cd3c3dbddb1ea5ff9ba962c2e8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42486 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25Revert "mb/pcengines/apu2: Update GPIO Reads & writes"Kyösti Mälkki
This reverts commit 87f9fc8584c980dc4c73667f4c88d71d0e447a0c. GPIO configuration is supposed to be abstracted using <gpio.h> and the details of ACPMMIO GPIO bank hidden. This commit took it the opposite direction. Change-Id: Iacd80d1ca24c9d187ff2c8e68e57a609213bad08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42684 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/amd/mandolin: Drop empty help textPatrick Georgi
kconfig complains. Change-Id: I281e4faa53cad5677864305feb9162b598ae483e Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42775 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-25util/abuild: Only update submodules oncePatrick Georgi
Without this, each build will try to update the submodules. Not necessarily a problem but git locks repos, creating spurious error messages. Change-Id: Iba20677d4b5f9365c92f7ed247ca56acb7d33b27 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-06-25mb/amd/mandolin: Quote string in Kconfig that contains /Patrick Georgi
Newer versions of Kconfig require that. Change-Id: I95f889d462ace1b912b5e6c7320973e8a826f3cb Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42773 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25soc/intel/cannonlake: Add PchPmPwrCycDur to chip optionsSridhar Siricilla
Add PchPmPwrCycDur to chip options to control the UPD FSPS PchPmPwrCycDur from devicetree. The UPD determines the minimum time a platform will stay in reset during host partition reset with power cycle or global reset. This patch also ensures configured PchPmPwrCycDur value doesn't violate the PCH EDS specification. TEST=Verified on Hatch and Puff boards Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: I55e836c78fab34e34d57b04428a1498b7dc7174b Reviewed-on: https://review.coreboot.org/c/coreboot/+/42440 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-06-25sb/intel/i82801ix/Kconfig: Sort options alphabeticallyAngel Pons
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical. Change-Id: I6f49af457f104dbf73e156f46ce09103ca9dccdb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42647 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25sb/intel/i82801jx/Kconfig: Sort options alphabeticallyAngel Pons
Tested with BUILD_TIMELESS=1, Intel DG43GT remains identical. Change-Id: Ie5b87726cccf9fb8e45db39a6d6fba8ac4342f5f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42646 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25sb/intel/i82801{gx,jx}/nvs.h: Add include guardsAngel Pons
Change-Id: Ib7eb3469b03fd58afa1f6cb5822f7c6f1cac35e0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42645 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25sb/intel/i82801jx: Rename GNVS `PSVT` and `CRTT`Angel Pons
Most other Intel southbridges call those `TPSV` and `TCRT` instead. Change-Id: Id4c30cd53abc544b743eb80696bfafe45929208e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42644 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25drivers/intel/fsp2_0: decouple FSP_PEIM_TO_PEIM_INTERFACE from FSP 2.1Jonathan Zhang
Not all FSPs based on FSP 2.1 supports the feature of external PPI interface pulled in via FSP_PEIM_TO_PEIM_INTERFACE. Deselect FSP_PEIM_TO_PEIM_INTERFACE when PLATFORM_USES_FSP2_1 is selected. Update Kconfig of SOCs affected (icelake, jasperlake, tigerlake). Change-Id: I5df03f8bcf15c9e05c9fd904a79f740260a3aed7 Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2020-06-25soc/intel/xeon_sp: use edk2-stable202005 headersJonathan Zhang
Use edk2-stable202005 header files instead of UDK2017 header files, since FSP uses latest EDK2 code base. TESTED=Booted OCP Delta Lake server to OS. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I3c845bceb201d4ffdf5adbf2af9aad6d6794a19d Reviewed-on: https://review.coreboot.org/c/coreboot/+/42240 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25vendorcode/intel: Add edk2-stable202005 supportJonathan Zhang
This patch includes (edk2/edk2-stable202005) all required headers for edk2-stable202005 quarterly EDK2 tag from EDK2 github project using below command: >> git clone https://github.com/tianocore/edk2.git vedk2-stable202005 Only include necessary header files. MdePkg/Include/Base.h was updated to avoid compilation errors through safeguarding definitions for MIN, MAX, NULL, ABS, ARRAY_SIZE. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I3172505d9b829647ee1208c87623172f10b39310 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42239 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25vendorcode/google/chromeos: Add GOOG0016 _HID for Chrome OS ACPIDuncan Laurie
The Chrome OS ACPI code has always used a legacy PNP ID "GGL0001" for the ID. This is technically valid but we have an official ACPI ID now so I allocated "GOOG0016" for an ID and we can eventually retire the legacy PNP ID. This is being discussed on LKML as part of an effort to upstream the Chrome OS ACPI kernel driver: https://lkml.org/lkml/2020/4/13/315 Change-Id: I2e41fe419113b327618f8f98058ef7af657f2532 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42735 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-25arch/x86/smbios: Add more fields to be overriden for type 3 and 4Johnny Lin
For type 3, override chassis asset_tag_number with smbios_mainboard_asset_tag() and add two functions that can override chassis version and serial_number. For type 4 add smbios_processor_serial_number() to override serial_number. Tested on OCP Tioga Pass. Change-Id: I80c6244580a4428fab781d760071c51c7933abee Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com>
2020-06-25drivers/ipmi: Add IPMI read FRU chassis info areaJohnny Lin
Implemented according to IPMI "Platform Management FRU Information Storage Definition" specification v1.0 for reading FRU data Chassis Info Area. Tested on OCP Tioga Pass. Change-Id: Ieb53c20f8eb4b7720bf1fe349e6aaebaa4c37247 Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40306 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25drivers/ipmi: Add function read_data_string() to make code cleanerJohnny Lin
Tested on OCP Tioga Pass. Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com> Change-Id: I1da8abaa682af802e5cda65e5021069daf4ee717 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40621 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
2020-06-25mb/ocp/deltalake: Enable IPMI KCSMorgan Jang
Config the IO port for IPMI KCS and set bmc_boot_timeout for checking BMC self test result. TEST=Check if the BMC IPMI reponse data is correct or not. Change-Id: I675060299b486986ebc39d8f714615b3e13de89a Signed-off-by: Morgan Jang <Morgan_Jang@wiwynn.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41023 Reviewed-by: Jonathan Zhang <jonzhang@fb.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25soc/intel/xeon_sp/cpx: display UPDs and CPX-SP specific HOBsJonathan Zhang
Support display of CPX-SP specific HOBs (when CONFIG_DISPLAY_HOBS is selected, and UPD parameters (when CONFIG_DISPLAY_UPD_DATA is selected). Such display is used for FSP debugging purpose. It adds small amount of boot time. Some UPD display log excerpts: UPD values for SiliconInit: 0x04: BifurcationPcie0 0x03: BifurcationPcie1 Some HOB display log excerpts: === FSP HOBs === 0x758df000: hob_list_ptr 0x758df000, 0x00000038 bytes: HOB_TYPE_HANDOFF 0x758df038, 0x00000028 bytes: HOB_TYPE_MEMORY_POOL Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Signed-off-by: Reddy Chagam <anjaneya.chagam@intel.com> Change-Id: I42dd519103cc604d4cfee858f4774bd73c979e77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/41348 Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/octopus/variants/bobba: fix disable_xhci_lfps_pm by skuSheng-Liang Pan
due to overridetree.cb set disable_xhci_lfps_pm = 0, need correct condition expression to let function work. BUG=b:146768983 BRANCH=octopus TEST=build coreboot with DisableXhciLfpsPM being set to 1 and flash the image to the device. Run following command to check if bits[7:4] is set 0: >iotools mmio_read32 "XHCI MMIO BAR + 0x80A4" Signed-off-by: Pan Sheng-Liang <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I53621d7674a531adfa40e8703cb2cd01c50376b8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42564 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Henry Sun <henrysun@google.com> Reviewed-by: Marco Chen <marcochen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Move PCIE_RST0_L configuration to early GPIO tableFurquan Shaikh
This change moves the configuration of PCIE_RST0_L as native function to happen in early GPIO table. This ensures that the PERST# signal is deasserted as soon as possible when the system comes out of sleep state in case the sleep path asserted/deasserted the PERST# as GPIO out. A big difference in functionality with this change is that PCIE_RST0_L signal is now configured as part of RO, which should be fine since all PCIe devices have a second AUX_RESET_L signal or use PCIE_RST1_L to control the actual reset to the device. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I21a9c25b5a8a6d502cdb79cbe0dbad6ef98d6d63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42739 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Add support for WiFi power sequencingFurquan Shaikh
This change replaces variant_wifi_romstage_gpio_table() with variant_pcie_power_reset_configure() to handle the reset and power sequencing for WiFi devices pre- and post- v3 version of schematics. These are the requirements that need to be satisfied: 1. As per PCI Express M.2 Specification Revision 3.0, Version 1.2, Section 3.1.4 "Power-up Timing", PERST# should stay disabled until `TPVPGL` time duration after device power has stabilized. Value of TPVPGL is implementation specific. 2. For Intel WiFi chip, it is known to get into a bad state if the above requirement is violated and hence requires a power cycle. 3. On pre-v3 schematics: - For both dalboz and trembyle references, GPIO42 drives WIFI_AUX_RESET_L which is pulled up to PP3300_WIFI. - For both dalboz and trembyle references, PP3300_WIFI is controlled using GPIO29. This pad gets pulled high by default on PWRGOOD because of internal pull-up. But, at RESET# it is known to have a glitch. When GPIO29 gets pulled high, it causes WIFI_AUX_RESET_L to be pulled high as well. This violates the PCIe power sequencing requirements. Hence, for pre-v3 schematics on both dalboz and trembyle, following sequence needs to be followed: a. Assert WIFI_AUX_RESET_L. b. Disable power to WiFi. c. Wait 10ms to allow WiFi power to go low. d. Enable power to WiFi. e. Wait 50ms as per PCIe specification. f. Deassert WIFI_AUX_RESET_L. 4. On v3 schematics: - For trembyle: WIFI_AUX_RESET_L is driven by GPIO86 which has an internal PU as well as an external PU to PP3300_WIFI. - For dalboz: WIFI_AUX_RESET is driven by GPIO29. This is active high and has an internal PU. It also has an external 1K PD to overcome internal PU. - For both dalboz and trembyle references, PP3300_WIFI is controlled by GPIO42 which has an internal PU and external PD. Trembyle schematics have a comment saying strong PD of 2.2K but the stuffed resistor is a weak one (499K). ON dalboz, it uses a weak PD (which doesn't look correct and instead should be a strong PD just like trembyle). Having a strong PD ensures that the WiFi power is kept disabled when coming out of G3 until coreboot configures GPIO42 as high. - Thus, for v3 schematics, following sequence needs to be followed: a. Assert WIFI_AUX_RESET{_L} signal. b. Enable power to WiFi. c. Wait 50ms as per PCIe specification. d. Deassert WIFI_AUX_RESET{_L} signal. BUG=b:157686402, b:158257076 TEST=Verified that QCA and AX200 cards both continue working. Tested QCA on Dalboz and Trembyle. Tested AX200 on morphius. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I532131ee911d5efb5130d8710f3e01578f6c9627 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42738 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update ramstage GPIOs for v3 schematics for dalboz referenceFurquan Shaikh
This change updates the baseboard GPIO table in ramstage to match v3 version of dalboz reference schematics. All variants using this reference are accordingly updated to configure the GPIOs that changed as part of v3 schematics. BUG=b:157165628, b:157744136, b:157743835 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: If9d0e35801f9f9b15eddeb4ec7068fed6d401307 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251394 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Auto-Submit: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42725 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update ramstage GPIOs for v3 schematics for trembyle referenceFurquan Shaikh
This change updates the baseboard GPIO table in ramstage to match v3 version of trembyle reference schematics. All variants using this reference are accordingly updated to configure the GPIOs that changed as part of v3 schematics. BUG=b:157088093, b:154676993, b:157098434 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ib1d6ee2e995c1fca229c20ea63da9a45fb89f64a Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251393 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42724 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update _v3 romstage and wifi GPIO tables for dalbozFurquan Shaikh
This change updates _v3 version of romstage and wifi GPIO tables to match v3 schematics. BUG=b:157165628, b:157744136, b:157743835 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Id8b46fcb4552af6eda5b50224b0557bae37f9ebd Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251392 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42723 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Update _v3 romstage and wifi GPIO tables for trembyleFurquan Shaikh
This change updates _v3 version of romstage and wifi GPIO tables to match v3 schematics. BUG=b:157088093, b:154676993, b:157098434 TEST=Compiles Signed-off-by: Martin Roth <martinroth@chromium.org> Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ic605559b3226e2ad9b5b3f3fa45c4aa9f9b5fe22 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251391 Reviewed-by: Aaron Durbin <adurbin@google.com> Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42722 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Prepare variants for v3 schematicsFurquan Shaikh
This change updates variant_romstage_gpio_table() and variant_wifi_romstage_gpio_table() to support v3 version of schematics for dalboz and trembyle reference designs. gpio_set_stage_rom and gpio_set_wifi are divided into two groups: a) Pre-v3 (GPIO table for pre v3 schematics): * gpio_set_stage_rom_pre_v3 * gpio_set_wifi_pre_v3 b) v3 (GPIO table for v3+ schematics): * gpio_set_stage_v3 * gpio_set_wifi_v3 Currently, both _v3 is a copy of _pre_v3, but will be updated in follow-up CLs to make it easier to identify what changed from _pre_v3 to _v3. BUG=b:157088093, b:154676993, b:157098434, b:157165628, b:157744136, b:157743835 TEST=Compiles Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I444875d93100c2f2abdb6dec4312861fd89d9b78 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2251390 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42721 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Drop RAM_ID configuration from romstage gpio tableFurquan Shaikh
RAM_ID GPIOs are configured by ABL based on the information added to APCB. coreboot does not need to configure these pads. This change drops the RAM_ID configuration from trembyle baseboard. Dalboz never really configured RAM_IDs in coreboot. BUG=b:154351731 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ie1dfcc3c185304d917ab4386920445ba0119ac69 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252710 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42720 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-25mb/google/zork: Move variant_early_gpio_table to gpio_baseboard_common.cFurquan Shaikh
This change moves the GPIOs that need to be configured for early access in coreboot to early_gpio_table[] in gpio_baseboard_common.c. These GPIOs include: * Pads to talk to EC * Pads to talk to TPM * Pads to talk to serial console These should be configured in the first stage that runs coreboot i.e. in case of VBOOT_STARTS_BEFORE_BOOTBLOCK, it should be done as part of verstage (which starts on PSP), else it should be done as part of bootblock (which is the first stage that runs on x86). This change drops GPIO_137 from early_gpio_table since that is not really required in early stages. BUG=b:154351731 TEST=Verified that trembyle still boots. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: Ifbdbb02cbfc65ddb68f0ae75cf4b1f2ea1656b91 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2252709 Commit-Queue: Furquan Shaikh <furquan@chromium.org> Tested-by: Furquan Shaikh <furquan@chromium.org> Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42719 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2020-06-25soc/intel/cannonlake: Add missing USB_PORT_WAKE_ENABLE defineEdward O'Callaghan
Align support for enable wake-on-usb attach/detach as was introduced in Skylake in `commit 3bfe3404df32ca226c624be0435c640bf1ebeae7`. BUG=b:159187889 BRANCH=none TEST=none Change-Id: Ie63e4f1fcdea130f8faed5c0d34a6a96759946b6 Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42716 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24mb/amd/mandolin: maximize CBFS sizeFelix Held
Change-Id: Ib829da0972bb7ec98f66fe8fe683289d91ad58dc Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-06-24jasperlake: enable DPTF functionality for dededeSumeet R Pawnikar
Enable DPTF functionality on jasperlake based dedede platform BRANCH=None BUG=None TEST=Built for dedede system Change-Id: I17b6e4e96abee6181b0d1f94c356a32aa82c19b9 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41668 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24soc/amd/picasso: fix host bridge bus numbersAaron Durbin
The host bridge's resources covering bus numbers assumed 256 buses were being decoded. However, MMCONFIG was only covering 64 buses. This results in Linux complaining: acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge When retrieving the host bridge's resources fix up the bus numbers to utilize MMCONF_BUS_NUMBER Kconfig. I couldn't keep IASL from complaining when trying to do this statically. BUG=b:158874061 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Ief1901743e2c99f583ef0181490d493d23734f64 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42734 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-06-24mb/google/zork: Add UPD xhci0_force_gen1 for Trembyle and EzkinilLucas Chen
Add UPD xhci0_force_gen1 for Trembyle and Ezkinil. The default setting is set to disable, and set enabled for Ezkinil. Trambyle -> set default as disable. Ezkinil -> set enable by request. BUG=b:156314787 BRANCH=trembyle-bringup TEST=Build. Verified the setting will be applied on Ezkinil/Trembyle. Signed-off-by: Lucas Chen <lucas.chen@quanta.corp-partner.google.com> Change-Id: I65d06bfe379f9e42101bfae1a02a619ee2f24052 Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2216090 Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-06-24soc/amd/picasso: Add UPD xhci0_force_gen1Chris Wang
Adding xhci0_force_gen1 UPD to force USB3 port to gen1. BUG=b:156314787 BRANCH=trembyle-bringup TEST=Build. Cq-Depend: chrome-internal:3013435 Change-Id: Iff3746e248625c253776c3bc3946d123b0635ffe Signed-off-by: Chris Wang <chris.wang@amd.corp-partner.google.com> Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/2217662 Reviewed-by: Raul E Rangel <rrangel@chromium.org> Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42216 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Eric Peers <epeers@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24mb/google/volteer/malefor: Update overridetree.cbWilliam Wei
1) Based on malefor schematics, disable unused I2C port, USB port, TBT PCIe 2) Add audio device to the tree BUG=b:150653745, b:154973095 TEST=FW_NAME=malefor emerge-volteer coreboot chromeos-bootimage Boot to kernel and check the devices' function worked properly. Signed-off-by: William Wei <wenxu.wei@bitland.corp-partner.google.com> Change-Id: I9ce465705e8b8f67ddbc9e4eb06c5a8bfac65fcb Reviewed-on: https://review.coreboot.org/c/coreboot/+/42246 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24volteer: Create volteer2 variantNick Vaccaro
Create the volteer2 variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). Modified to alphabetize and update to duplicate latest volteer changes currently in the review and merge pipeline. Added the following missing files from the variants/volteer2/ folder: - gpio.c - include/variant/acpi/dptf.asl - acpi/mipi_camera.asl - Makefile.inc - memory/dram_id.generated.txt - memory/Makefile.inc - memory/mem_list_variant.txt - overridetree.cb BUG=b:159135047 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_VOLTEER2 Change-Id: I987c72b83dc993af248a753a2caa56be0f26c1ad Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42605 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: YH Lin <yueherngl@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-06-24soc/intel/tigerlake: Fix unresolved symbol CDW1 errorJohn Zhao
The dmesg shows unresolved symbol CDW1 with AE_NOT_FOUND error after booting to kernel. Fix the error by properly creating the buffer field CDW1 to cover all errors scenarios. BUG=b:140645231 TEST=Verified no AE_NOT_FOUND error related to \_SB.OSC.CDW1. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: Ibfe677f87736ce1930e06b9cd649791977116012 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42693 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 09:24:59 +0000