summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-22soc/amd/stoneyridge: Remove duplicate macros in pci_devs.hChris Ching
BUG=b:68046770 TEST=build Change-Id: Iea0df0dc7baa384cac45a300fdcc8d59f0aac798 Signed-off-by: Chris Ching <chingcodes@google.com> Reviewed-on: https://review.coreboot.org/22114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-22intel/i210: Set bus master bit in command registerWerner Zeh
There are still Ethernet drivers out there in the wild which expect that the master enable bit was set by firmware. A missing master enable bit will lead to a non-functional driver. Though it is clear the task of the driver to set this bit it is too late now. So work around this issue on firmware level...again! Change-Id: I677b22c643b73634b1a2129d948b991446e1f8fd Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2017-10-20kahlee: Set Kahlee GPEsMarc Jones
Add GPE configuration table. Remove GPE3 from the power button ASL and set the EC to GPE3(AGPIO22). Set the EC and PCIE/WLAN SCI GPIO signals. Set GPE ASL methods for: PCIE/WLAN 8h EHCI 18h XHCI 1fh Note EC GPE3 methods are in the EC ASL. BUG=b:63268311 BRANCH=none TEST=Test lidswitch powers the device on and off at the login screen. Change-Id: I27c880ee84b6797d999d4d5951602b654ede948e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22096 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-20cr50_enable_update: Add printk before EC hibernateShelley Chen
Add printout before EC hibernates during a cr50 update to clarify that failure is due to EC rather than cr50. Ran into a situation where DUT shut down during cr50 update and the EC was the culprit. BUG=None BRANCH=None TEST=None Change-Id: I54813fec123de69604d1da4dfc65eaeb77d1662e Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/22120 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-20google/fizz: Set PL2 value based on sku id/charge max powerShelley Chen
Set PL2 based on either 90% of usb c charger's max power or sku id if using a barrel jack. BUG=b:37473486 BRANCH=None TEST=output debug info for different skus and make sure PL2 set correctly. Change-Id: I487fce4a5d0825a26488e71dee02400dbebbffb3 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/21772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20chromeec: Add function to retrieve usb c charger infoShelley Chen
Add google_chromeec_get_usb_pd_power_info(), which will call the EC_CMD_USB_PD_POWER_INFO host command to retrieve the current and voltage info of the usb c charger. Returns power info in watts. BUG=b:37473486 BRANCH=None TEST=output debug info to make sure that correct power is returned. Change-Id: Ie14a0a6163e1c2699cb20b4422c8062164d92076 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/21771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20lib/gpio: constify array inputsAaron Durbin
The arrays of gpio_t are not manipulated in any way within the gpio library. Add const to indicate that. Change-Id: Ie32ab9de967ece22317e2b97b62e85b0757b910d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-20stoneyridge: Add SCI/GPE configurationMarc Jones
Add functions for configuring the GPE ACPI SCI events. BUG=b:63268311 BRANCH=none TEST=With the Kahlee GPE setup patch, test lidswitch powers the device on and off at the login screen. Change-Id: I5c282268edbd7b92a3f2ca7c72896406c8f8512f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22095 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20soc/stoneyridge: Remove _PRW ASLMarc Jones
Remove _PRW GPE settings from GPP and USB ASL. The mainboard sets the GPEs. In addition, Stoney Ridge GPPs don't generate a GPE/SCIs. Change-Id: Ib6a07a997bc3508109a67867014210091efc0c99 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-20stoneyridge: Fix USB ASLMarc Jones
Stoney Ridge has one EHCI controller and one XHCI controller. Also, update the Kahlee and Gardenia mainboards ASL to match. Change-Id: I5749ca0640796732e74e551147f8c4446317b77e Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: https://review.coreboot.org/22097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20intel/cannonlake_rvp: Update board nameLijian Zhao
Change the board name from cannonlake U DDR4 to U LPDDR4 to match actual platform. TEST=NONE Change-Id: Id350e3cbc299d49431197ef5f914ea9a7310a0a5 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-20soc/intel/cannonlake: Add platform.aslLijian Zhao
Include common platform.asl to have generic indication of power transition state of system. TEST=Enter and resume from S3, check the post code had been changed to 0096 and 0097. Change-Id: Ic38ac6d7e60441caeba5c088c9dbe4d901355782 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22111 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-20soc/intel/skylake: update GNVS with SGX dataPratik Prajapati
- Call sgx_fill_gnvs to update GNVS data, if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set. - With this patch SGX ACPI device would get pached with enumaretd values of ECP device status, base address and length Change-Id: Ief0531fbab34838a3f8adb9cdc7d3fe19203c432 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21972 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20soc/intel/apollolake: update GNVS with SGX dataPratik Prajapati
Call sgx_fill_gnvs to update GNVS data, if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set. Change-Id: I692f466d2c6f537d44aa042c4890ee8055c982c8 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20intel/common/block/sgx: Add API to enumerate SGX resources and update GNVSPratik Prajapati
Intel SDM: Table 36-6. CPUID Leaf 12H, Sub-Leaf Index 2 is called to enumerate SGX resources. Change-Id: I62f3fd8527e27040336c52bc78768035f4b7e5a9 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20soc/intel/skylake: Add GNVS variables and include SGX ASLPratik Prajapati
- Add GNVS variables for SGX - Include SGX ASL if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set - With this patch SGX ACPI device would get created and kernel SGX driver would let loaded Change-Id: Ie95eb79a01e1c0005e0f137b015b7fe000c1ab2a Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21971 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20soc/intel/apollolake: Add GNVS variables and include SGX ASLPratik Prajapati
- Add GNVS variables for SGX - include SGX ASL if CONFIG_SOC_INTEL_COMMON_BLOCK_SGX is set - With this patch SGX ACPI device would get created and kernel SGX driver would let loaded Change-Id: I112cad3cd871082b1884787084c4cc0ebdc7d08f Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21965 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20intel/common/acpi: Add common SGX ASLPratik Prajapati
- Add EPC device for SGX. Kernel SGX driver expects EPC device. - Hid is INT0E0C - version of the object is 1.0, so _STR is "Enclave Page Cache 1.0" Change-Id: I9efba46469a125ea99241b04fe1ae550d6e03598 Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/21964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20vendorcode/amd/pi/00670F00: Remove S3 restore functionsMartin Roth
These functions are not currently used, and were not in the original AGESA source code drop. The structs involved here were marked "private" in AGESA headerfiles and should not be exposed. They could be handled as anonymous structs and required allocation size is communicated by other means. BUG=b:64766233 TEST=Build in cros tree and upstream coreboot, with old headers and updated headers. Change-Id: Iec346205470150257fd9d09131d54231b321740b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22061 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-20soc/amd/common: Set AltImageBasePtr to 0Martin Roth
In the original AGESA headers, AltImageBasePtr is a UINT32, so don't set it to VOID. 0 works for either UINT32 or VOID *, as demonstrated by the other 7 places in this file where it's already set to 0 instead of NULL. Change this location to 0 to support either version of the headers. BUG=b:64766233 TEST=Build in cros tree and upstream coreboot, with old headers and updated headers. Change-Id: Ib6f3883e08231a6ca896c2ee2ef631c77feafedd Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-20Stoney Ridge Platforms: cast AGESA tables to void *Martin Roth
In the original AGESA headers, these tables are not defined as const. Cast them to void * so that they'll work with either version of the headers. BUG=b:64766233 TEST=Build in cros tree and upstream coreboot, with old headers and updated headers. Change-Id: I75387b57caf5a3c6c25655120aafd942254b5c73 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22059 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-20Stoney Ridge Platforms: Make AGESA callout tables commonMartin Roth
There was no reason to have the AGESA callout tables in each mainboard, so move them to soc/amd/common. Move chip specific functions into the stoneyridge directory: - agesa_fch_initreset - agesa_fch_initenv - agesa_ReadSpd Combine agesa_ReadSpd and agesa_ReadSpd_from_cbfs, and figure out which to use. Soldered-down memory still needs to be supported in a future commit, as stoney supports both DDR3 & DDR4. A bug has been filed for support for the upcoming Grunt platform. BUG=b:67209686 TEST=Build and boot on Kahlee Change-Id: Ife9bd90be9eb0ce0a7ce41d75cfef979b11e640b Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-20util/genbuild_h: improve robustness against corrupt .git directoriesPatrick Georgi
The new test lets git check if $top is actually a git repo, instead of just looking for clues. BUG=chromium:776174 BRANCH=none TEST=`mv .git .foo; mkdir .git; util/genbuild_h/genbuild_h.sh` provides a valid build.h instead of failing because git is unhappy about the .git directory. Change-Id: I7fcc64d66e0b59fca1479b4c142fd0559aa984f4 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-20board_status/towiki: Fix link to last report for "clone" boardsJonathan Neuschäfer
I noticed that the "last known good" field for the ThinkPad R400 pointed nowhere. Instead of https://www.coreboot.org/Supported_Motherboards#lenovo.2Ft400 it pointed to https://www.coreboot.org/Supported_Motherboards#lenovo.2Fr400 which does not exist because if a board is marked as a "Clone of" another one in board_info.txt, towiki uses the original board's reports to derive the "last known good" date and color. Change-Id: Ie235ca8e8691f49d041de7c5770eae77cdd444a7 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-10-20mainboard/pcengines/apu2: add apu3 and apu5 variantsKamil Wcislo
Apu3 and apu5 are additional variants of apu2 board. Apu3 has no LPC connector exposed, but has additional USB header. It has also 2 slots for SIM cards and one of the gpios is used to control switching between them. Apu5 is differing by having 6 SIM card slots (3 SIMSWAP switches). This patch adds support for those other variants by not introducing additional code redundancy. Change-Id: I4fded98fed7a8085062cdea035ecac3d608cd2a0 Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-19soc/amd/stoneyridge: Use macros for PCI_DEVFN callsChris Ching
* Change all calls to PCI_DEVFN to macros * Remove CBB and CDB Kconfig since these are static for stoneyridge BUG=b:62200746 TEST=build Change-Id: I001c4ccd0ad7cf2047870b3618e13642144ddf56 Signed-off-by: Chris Ching <chingcodes@google.com> Reviewed-on: https://review.coreboot.org/22110 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-19soc/amd/stoneyridge: Replace magic registersRichard Spiegel
Replace southbridge registers and register values from magic numbers to literals, provided these registers are currently defined publicly or in NDA datasheet. Registers available only internally to AMD are left unchanged. BUG=b:62199625 Change-Id: I9187ba1c41ebb1201ddc177e8184672c60cd5f5d Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-19Makefile.inc: remove '--global' flag from config check for gitconfig ruleChris Ching
As long as user.name and user.email are set, gitconfig should pass. This handles if values are only set for the local repo, or if values are stored in ~/.config/git/config BUG=none TEST=make gitconfig Change-Id: Ie01e7a155f9e6db35d5991e4303aad85fb277a06 Signed-off-by: Chris Ching <chingcodes@google.com> Reviewed-on: https://review.coreboot.org/22109 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-19intel/fsp: Update cannonlake FSP headerLijian Zhao
Update cannonlake FSP header file to revision 7.x.15.46. The following item had been updated: 1. Remove/Hide restricted structure. 2. Add EBR as extention of RMT features. 3. Add cpu wakeup timer UPD. 4. Remove XHCI access lock UPD. TEST=NONE Change-Id: I065edbeffdaf555ea7d54ec3fdce56d026789c52 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/cannonlake: Fix HECI error on resetLijian Zhao
Move HECI init from bootblock to romstage, the HECI bar saved by CAR_GLOBAL, which will be lost on different stage. HECI BAR in ramstage will be read back from PCI. Also add fail safe option to reset in case of HECI command not successful. TEST= Force global reset from FSP and read back HECI bar in debug print. Change-Id: I46c4b8db0a80995fa05e92d61357128c2a77de4b Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/cannonlake: Use EBDA structure to store soc reserve memory sizeSubrata Banik
Avoid calling calculate_dram_base() function to get chipset reserved memory size during pci resource allocation. Rather use EBDA to store chipset reserved memory size while calling cbmem_top_int(). This patch avoids one extra calculate_dram_base() call. BRANCH=none BUG=b:63974384 TEST=Ensures DRAM based resource allocation has taken care of Intel SoC reserved ranges. Change-Id: I2771ea55253ca7d16cd2e2951889ab092b47a9b1 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22099 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19soc/intel/skylake: Use EBDA structure to store soc reserve memory sizeSubrata Banik
Avoid calling calculate_dram_base() function to get chipset reserved memory size during pci resource allocation. Rather use EBDA to store chipset reserved memory size while calling cbmem_top_int(). This patch avoids one extra calculate_dram_base() call. BRANCH=none BUG=b:63974384 TEST=Ensures DRAM based resource allocation has taken care of Intel SoC reserved ranges. Change-Id: I52f359db5a712179d7f2accb4d323d759f3b052b Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/22098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/cannonlake: Add IGD Support and pre-OS display codeAbhay Kumar
1. Add IGD opregion initialization. 2. Use frame buffer return by FSP for display. 3. Derived from "src/soc/intel/apollolake/graphics.c" with changes needed for CNL. TEST=Pre-OS screen comes up and VBT is getting passed to kernel. Change-Id: I19c0cf6cfc03fc9df9e98c75af4e486cb5a19e32 Signed-off-by: Abhay Kumar <abhay.kumar@intel.com> Reviewed-on: https://review.coreboot.org/21999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2017-10-19siemens/mc_bdx1: Initialize GPIOsWerner Zeh
Add GPIO initialization for mc_bdx1 mainboard. Call init_gpios() as early as possible as FSP will set up things (like hiding PCI devices) rather early. If connections on the mainboard are dependent on GPIO settings then FSP can screw things up (e.g. disabling not yet connected PCI root ports). Change-Id: I003277cfb871f861900b7fcdc5ec851d4c1c1e6a Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/fsp_broadwell_de: Add support for GPIO handlingWerner Zeh
Add functionality to initialize, set and read back GPIOs on FSP based Broadwell-DE implementation. Change-Id: Ibbd86e2142bbf5772eb4a91ebb9166c31d52476e Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/22034 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19cpu/x86: add AMD registers to SMM save stateJohn E. Kabat Jr
In amd64_smm_state_save_area_t break out fields in reserved4 to allow access. BUG=b:65485690 Change-Id: I592fbf18c166dc1890010dde29f76900a6849016 Signed-off-by: John E. Kabat Jr <john.kabat@scarletltd.com> Reviewed-on: https://review.coreboot.org/22092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-19sb/intel/bd82x6x: Add new USB currentsVagiz Trakhanov
These currents were found on Gigabyte GA-Z77-DS3H with vendor bios. Change-Id: I547c4ab3a2ce507d013ed527ab81291a916ce9b5 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-19nb/sandybridge: Add a kconfig option to ignore XMP max DIMMsVagiz Trakhanov
XMP profiles can have a restriction on max supported DIMMs per channel, but many configurations work with more DIMMs. This is relevant on mainboards with 2 DIMM slots per channel (usually 4 in total). Populating both slots with DIMMs that support XMP profiles only with 1 DIMM per channel turns off said XMP profiles. TEST=On a system with two DIMM slots per channel populate both slots on one channel and ensure that DIMMs run with XMP profiles enabled. Change-Id: I1f22d981afcef0ee73785823b0a943cf3d3564e3 Signed-off-by: Vagiz Trakhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-19src/vendorcode/amd: Use AR variable in MakefilesMartin Roth
Change-Id: I5158f1bcc18eb5b15f310d0cf50fb787c12317c8 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21700 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-19AGESA f14: Fix DDI maps in OemCustomize.cKyösti Mälkki
Creates identical object files. Change-Id: Ie8adb21a753cee6a72dae5eeb64a255e6ead2fe7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-19AGESA: Split long lines in OemCustomize.cKyösti Mälkki
Change-Id: I907f55622e6aaba401471239f706ab24cd26319f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-19AGESA f14: Drop PlatformGnbPcieComplex.hKyösti Mälkki
These were OEM configurations hidden inside a header file, notation was already dropped for f15tb and f16kb. Change-Id: Id64fa861fd516e9f7cae9eba9b8145e033fe9bdd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/21650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-19pcengines/apu2: Add timestamps to romstageMichał Żygowski
This change adds timestamps to romstage in order to keep PC Engines apu2 platform in active codebase. Change-Id: Ie0286d4982623da9d035c47df6077edaf51e5110 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/22071 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-19Enable time stamp collection by default on x86Paul Menzel
Collecting time stamps is useful, especially for board status uploads, and doesn’t come with any downsides. So enable it by default on as many boards as possible. The boards below currently fail to build properly, so only enable it by default on x86. 1. board.CUBIETECH_CUBIEBOARD 2. board.EMULATION_QEMU_POWER8 3. board.EMULATION_QEMU_UCB_RISCV 4. board.EMULATION_SPIKE_UCB_RISCV 5. board.LOWRISC_NEXYS4DDR 6. board.TI_BEAGLEBONE Change-Id: Ib01176fc2a4dffe37827c136bb8214083ce61180 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/11864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-19google/chromeec: Do not set wake mask before logging EC eventsFurquan Shaikh
Earlier the EC expected the host to set appropriate masks before reading host events. However, with recent change in EC, this is no longer required. This change removes the setting of wake_mask before and after reading the host events. However, in order to support older versions of EC, a new feature flag is added on the EC side that informs the host whether or not it is using the new way of reporting host events without having to set wake mask. CQ-DEPEND=CL:719578 TEST=Verified that EC wake events are correctly logged with both old and new versions of EC. Change-Id: Ib17e1296fb7d3bbc84fc7581fd0a9bd179ac87b9 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22006 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19mb/google/poppy: Log EC events during S0ix resumeFurquan Shaikh
This change adds support for logging EC events during S0ix resume. BUG=b:67874513 TEST=Verified that EC events are correctly logged during S0ix resume: 284 | 2017-10-16 20:45:12 | S0ix Enter 285 | 2017-10-16 20:45:16 | S0ix Exit 286 | 2017-10-16 20:45:16 | Wake Source | Power Button | 0 287 | 2017-10-16 20:45:16 | EC Event | Power Button 288 | 2017-10-16 20:45:35 | S0ix Enter 289 | 2017-10-16 20:45:40 | S0ix Exit 290 | 2017-10-16 20:45:40 | Wake Source | GPIO | 112 291 | 2017-10-16 20:45:40 | EC Event | Lid Open 292 | 2017-10-16 20:50:51 | S0ix Enter 293 | 2017-10-16 20:50:59 | S0ix Exit 294 | 2017-10-16 20:50:59 | Wake Source | GPIO | 112 295 | 2017-10-16 20:50:59 | EC Event | Mode change Change-Id: I9f6dcb8852d94ebf90bb5b63a17fde524d58d49f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19ec/google/chromeec: Export google_chromeec_log_events in ec.hFurquan Shaikh
This change makes google_chromeec_log_events available to callers outside ec.c. BUG=b:67874513 Change-Id: I36cc1e66e035eda707297d8153cd3fabeadfee45 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Probe XHCI for wake source for Internal PMEFurquan Shaikh
If GPE_STS indicates that the wake source is internal PME, but none of the controllers have the PME_STS bit set, then try probing individual XHCI ports to see if one of those was a wake source. In some cases e.g. gsmi logging with S0ix, pci_pm_resume_noirq runs before gsmi callback and clears PME_STS_BIT in controller register. In such cases, xhci port status might provide a better idea about the wake source. BUG=b:67874513 Change-Id: I841bb2abccfa9bd6553c1513e88a6306b40315e4 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Prevent false logs in pch_xhci_port_wake_checkFurquan Shaikh
1. Ensure that port_status read is not all 1s to ensure that read from mmio address returned valid data. 2. If device connect/disconnect shows that it was a wake source, there is no need to check for usb activity. BUG=b:67874513 Change-Id: Id8b4a1fec7bfe530fe435a0f52944b273cdd89ad Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Define mask for SMI handlers that can be run in SCI modeFurquan Shaikh
This change adds a mask to allow SMI handlers to be run even in SCI mode. This prevents any SMI handlers from accidentally taking unnecessary action in SCI mode. Add APM_STS and SMI_ON_SLP_EN_STS to this mask to allow gsmi and sleep to work in SCI mode. BUG=b:67874513 Change-Id: I298f8f6ce28c9746cbc1fb6fc96035b98a17a9e3 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Support logging wake source in SMMFurquan Shaikh
This change adds support for logging wake source information in gsmi callbacks. With this change, all the elog logging infrastructure can be used for S0ix as well as S3 on skylake. BUG=b:67874513 Change-Id: Ie1f81e956fe0bbe2e5e4c706f27997b7bd30d5e0 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Move power_state functions to pmutil.cFurquan Shaikh
This change moves soc_fill_power_state and soc_prev_sleep_state to pmutil.c. It allows the functions to be used across romstage and smm. BUG=b:67874513 Change-Id: I375ac029520c2cdd52926f3ab3c2d5559936dd8c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22085 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19soc/intel/skylake: Use PCH_DEV_* instead of PCH_DEVFN_*Furquan Shaikh
This change allows the same functions to be used across ramstage and smm without having to add checks for what stage is using it. BUG=b:67874513 Change-Id: I3b10c9e8975e8622d8cb0f66d90d39a914ba7e1c Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/skylake: Use newly added pmc_read_pm1_controlFurquan Shaikh
BUG=b:67874513 Change-Id: I298065f30647ae9bba8f6a8481bd34eec64f1d8e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/apollolake: Use newly added pmc_read_pm1_controlFurquan Shaikh
BUG=b:67874513 Change-Id: I6d5a76122b7d6e508e5ff3f4099e5d706fb48f9d Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19soc/intel/common/block/pmc: Add helper routines to read/write PM1_CNTFurquan Shaikh
This change adds and uses helper routines for reading and writing PM1_CNT register. BUG=b:67874513 Change-Id: I69b9347ab54a392b67ba733eb00922583dc1ee5f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22081 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-19soc/intel/common/block/pmc: Add new function pmc_fill_pm_reg_infoFurquan Shaikh
This change creates a new function pmc_fill_pm_reg_info that fills chipset_power_state structure with all the PM register information. On the other hand, already existing pmc_fill_power_state calls into pmc_fill_pm_reg_info and then checks and returns previous sleep state information. This allows caller to get all the PM register information when previous sleep state is not relevant. BUG=b:67874513 Change-Id: Idc91e4aef5379549355aceb685f7afafa6a220c5 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22080 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-19elog: Support logging S0ix sleep/wake info in elogFurquan Shaikh
1. Add support for new GSMI commands to log S0ix entry/exit information in elog. 2. In case of resume, provide callbacks to allow platform and mainboard to log any wake source information. BUG=b:67874513 Change-Id: I593e8a9e31cad720ac1f77aab447a0dbdbe9a28b Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18mainboard/intel/cannonlake_rvp: Enable hardware P state controlVaibhav Shankar
This patch provides configuration parameter to enable/disable Intel Speed Shift Technology. Change-Id: I95a240e8be6e19ac0e14698ab33543c491a8c974 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/22049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-18arch/x86: restore forwarding table on resume for EARLY_EBDA_INITAaron Durbin
In commit c06a3f72 (arch/x86: initialize EBDA in S3 and S0/S5 path) the BDA and EBDA are wiped in the resume path. However, the coreboot table forwarding entry wasn't taken into account so that was wiped which resulted in cbmem not working on the resume path. Fix this by stashing the forwarding table in cbmem and restoring it on the resume path. Change-Id: I142503535a78635fbb1c698fc7d032c1a2921813 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/22078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-10-18soc/intel/cannonlake: Set platform Debug Probe TypeLijian Zhao
Add option for user to select what kind of probe can be used for platform debug. TEST=Set to XDP and boot up system with XDP hooked, able to halt. Change-Id: Ib6add93e3f1c8a646aa625a4cea9be0acecc0487 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21942 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18intel/cannonlake_rvp: Enable Audio DSPLijian Zhao
Enable Audio DSP by default on cannonlake rvp platform. TEST=Boot up into OS and check Audio driver debug print. Change-Id: I6892c6d349019550c967ef30b84d385f396fc388 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18intel/cannonlake_rvp: Declare PCIE clock usageLijian Zhao
Define PCI express clock usage for cannonlake u and cannonlake y rvp based on board design. TEST=Bootable into OS. Change-Id: I7d71d9a87d87ce6a3e3270f67518afdd54a48db4 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Update PCIE CLKREQ programingLijian Zhao
UPD of PCI express clock request was updated in FSP 7.0.14.11, change that in coreboot accordingly. TEST=NONE Change-Id: I2261deccfb489c0de577d580997744a484f07a04 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21878 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18soc/intel/cannonlake: Add finalize functionLijian Zhao
Before OS boot up, the following actions need to be taken. 1. Lock down PMC/SPI/DMI/TCO register. 2. Disable Sideband Access. 3. Disable Heci interface. 4. Disable PMtimer base on config settings. TEST=Boot up into OS properly on both cannonlake y and cannonlake u rvp board. Change-Id: Icfa05b50fd76fbaeb856d398918990aedac4c5e6 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/21943 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-18google/snappy: Override USB2 strength by SKUIDKevin Chiu
14" BigDaddy needs to override USB2 TxiSet additionally to enhance driving strength. Otherwise EA test will fail on USB2 eye pattern. BUG=b:67820719 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I674c121a71866a5d44439eeb49e07f917d816de8 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/22037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18mb/google/fizz: skip reading SPD data when DUT resumes from S3Gaggery Tsai
This patch skips SPD data reading when system resumes from S3 since MRC cahce is adopted and validated in fsp_memory_init. BUG=b:67021596 TEST=Run suspend/resume on Fizz and make sure the systems are working well when system resumes from S3. Checked dmidecode information and SMBIOS type 17 data is the same with cold boot. Change-Id: I1692fca8456290d1471973b746537b5fec504e03 Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/21987 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Calculate soc reserved memory sizeSubrata Banik
This patch implements soc override function to calculate reserve memory size (PRMRR, ME stolen, PTT etc). System memory should reserve those memory ranges. BRANCH=none BUG=b:63974384 TEST=Ensures DRAM based resource allocation has taken care of intel soc reserved ranges. Change-Id: I3052a255c4496dc81c8dfc6882d3ad504abae9c6 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Use EBDA area to store cbmem_top addressSubrata Banik
This patch uses BIOS EBDA area to store relevent details like cbmem top during romstage after MRC init is done. Also provide provision to use the same EBDA data across various stages without reexecuting memory map algorithm. BRANCH=none BUG=b:63974384 TEST=Ensures HW based memmap algorithm is executing once in romstage and store required data into EBDA for other stage to avoid redundant calculation and get cbmem_top start from EBDA area. Change-Id: I763ad8181396ea8d8c0d5cf088264791ba62dceb Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Refactor memory layout calculationSubrata Banik
This patch split entire memory layout calculation into two parts. 1. Generic memory layout 2. SoC specific reserve memory layout. usable memory start = TOLUD - Generic memory size - - soc specific reserve memory size. Change-Id: I56e253504a331c0663efb2b90eaa0567613aa508 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18soc/intel/cannonlake: Create acpi_get_sleep_type() to get previous sleep stateSubrata Banik
This patch uses PMC common function to get previous sleep state using cbmem or chipset_power_state global structure. acpi_get_sleep_type is needed in PRE_RAM stage when soc selects CONFIG_EARLY_EBDA_INIT kconfig option. Change-Id: Ib9f8bdc1c682807450b6c01941b9a0927789b2d8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/21988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18google/chromeec: Drain all MKBP events while clearing host eventsFurquan Shaikh
EC maintains a FIFO of all MKBP events and sets host event whenever a new entry is added to the FIFO. Clearing only the host event for MKBP creates an inconsistent state where there are pending MKBP events in the FIFO but host event for MKBP is cleared. In order to maintain a consistent view, host should clear all MKBP events in the FIFO if host event is being cleared. This change drains out all the MKBP events in the FIFO when clear_pending_events is called. TEST=Verified by adding debug logs in EC to verify that all the MKBP events that occur before clear_pending_events is called get cleared from the FIFO. Change-Id: I131722dc01608dff30230fe341e6b23ae4cc409e Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-18google/chromeec: Add new helper function to read MKBP eventsFurquan Shaikh
This change adds a new helper function google_chromeec_get_mkbp_event that allows coreboot to query EC for the next available MKBP event. Change-Id: Ia6d64586ca62378d08025c96c2689c00c816041f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-17intel/cannonlake_rvp: enable HS400Bora Guvendik
Set SCS emmc HS400 enable FSP parameter. TEST=Boot to OS, verify HS400 SDHCI print Change-Id: I3ef8a6740ef985a0c51115d9b0ea753b5db2c70d Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/22008 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
2017-10-17soc/amd/stoneyridge: clean up chip.hMartin Roth
Remove obsolete register entries. BUG=None TEST=build Change-Id: Ia9beb9d42f0ee5d63d9e9073507fc606a9d45c46 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/22050 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-17soc/intel/common/block/pmc: Move pmc_disable_all_gpe to romstageFurquan Shaikh
Instead of disabling all GPEs during PMC init in bootblock, this change moves it to pmc_fill_power_state which allows romstage to correctly fill up GPE_EN registers in chipset_power_state. This is essential for correctly identifying the wake source. Disabling all GPEs was added recently in change 74145f76 (intel/common/pmc: Disable all GPEs during pmc_init) because keeping GPEs enabled in coreboot while enabling SMI could lead to side-effects as explained in the change. Moving pmc_disable_all_gpe to pmc_fill_power_state should be safe as that happens before SMI is enabled in coreboot. TEST=Verified that GPE-based wake source is correctly identified. Also, no issues observed while resuming from S3. Change-Id: I8e992ad09ffdefba62de11fa572e783715776bf1 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22033 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-17util/docker: Add bc to coreboot-sdkMartin Roth
bc is one of the standard posix utilities. I'm surprised that it's not in the debian docker image by default. Change-Id: I02f2d5296e7f87876b236af119965d1f4e6a0bc0 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21889 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2017-10-17amd/agesa: Remove redundant UDELAY_LAPIC selectionPaul Menzel
This is already selected in `src/cpu/amd/agesa/Kconfig`. Change-Id: I691a2ade10ee461b6bc34ea24d57a911281791f3 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/22011 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-16sandybridge/acpi: remove unnessary check of PCI IDsVagiz Trakhanov
DRAM Controller is always 00.0. No need to check its PCI ID. Change-Id: I9c5f3e5658905e464491579f8da01aa6a03bd3b7 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21754 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-16nb/intel: Add Ivy Bridge Server (Xeon-E3v2) PCI IDsVagiz Trakhanov
Change-Id: I1899dbe9498a0cc83b65b4bc1c6c0a555637fd05 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21753 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-16arch/x86: initialize EBDA in S3 and S0/S5 pathAaron Durbin
It's more consistent to re-initialize EBDA in all boot paths. That way, the data living in EBDA is cleared prior to be accessed (assuming it's after setup_ebda()). Change-Id: I05ff84f869f7b6a463e52b4cb954acc5566475cd Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2017-10-16soc/intel/common: sanity check ebda signatureAaron Durbin
It's possible for chipsets utilizing ebda to cache the cbmem_top() value to be called prior to the object being entirely setup. As such it's important to check the signature to ensure the object has been initialized. Do that in a newly introduced function, retrieve_ebda_object(), which will zero out the object if the signature doesn't match. Change-Id: I66b07c36f46ed9112bc39b44914c860ba68677ae Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/21995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2017-10-16drivers/elog: Fix debug build errorsJohn E. Kabat Jr
Add hexdump.c to Makefile.inc and change an elog_debug format to use %z for size_t arguments. This corrects build errors when ELOG_DEBUG is used. Change-Id: I3d5547eed8ada7c4bdcbbb8bb9d6965ade73beda Signed-off-by: John E. Kabat Jr <john.kabat@scarletltd.com> Reviewed-on: https://review.coreboot.org/21769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16intel/cannonlake_rvp: Modify memory parameters to support LP4 boardLijian Zhao
Replace the support for Cannonlake U DDR4 board to Cannonlake U LPDDR4 platform. TEST=Able to boot up on CNL U LPDDR RVP. Change-Id: I2a3dd39875705dcb93a60ceba7c143e3e5328148 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/22001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16buildgcc: Update binutils to 2.29.1Iru Cai
Also change the tarball from .tar.bz2 to .tar.xz. Change-Id: I25134dbadf07a2f0cb356c8ac8f2c612a957d176 Signed-off-by: Iru Cai <mytbk920423@gmail.com> Reviewed-on: https://review.coreboot.org/20806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-16crossgcc: Build libelf from elfutils 0.170Paul Menzel
> Could you make in a separate, independent change a update from the > completely outdated LIBELF (from mr511.de/software/libelf ) to recent > libelf? Those highly outdated libelf from this unmaintained mr511.de > webpage should not be used any more since years. There are also a ton > of security issues like for example: CVE-2017-7607, CVE-2017-7608, ... > CVE-2017-7613. Recent version of this software is included in the > elfutils that are available here: https://sourceware.org/elfutils/ -> > download link: > https://sourceware.org/elfutils/ftp/0.170/elfutils-0.170.tar.bz2 Remove the obsolete patch, which doesn’t apply anymore, and only affected the build system, which is different now. Increment the buildgcc version string as a tool version is changed. TEST=Running `make crossgcc-i386` succeeds. Change-Id: Iadd320a18c5d9fe2a82a347e39f01d8b7f8806c2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/21435 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-10-16cpu/amd: Fix spelling of *implementation*Paul Menzel
Change-Id: I3ef810ee59492c8d7147934e61523c8fd223863b Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/22013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-16cpu/x86/mtrr: Remove var-MTRR alignment optimizationNico Huber
The code used to split up ranges >64MiB into 64MiB-aligned and unaligned parts. However in its current state the next step, calc_var_mtrr_range(), results in the same allocation, no mat- ter if we split the range up before. So just drop the split-up. Change-Id: I5481fbf3168cdf789879064077b63bbfcaf122c9 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-10-16google/reef: Add more special cases for coral nasherPatrick Georgi
BUG=b:65386429 BRANCH=none TEST=panel lights up Change-Id: I9871969314b9b64bee2b20332e35bfc6fbd2ddda Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/22002 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-16src/mainboard/google/kahlee: Remove legacy tablesRichard Spiegel
Remove IRQ and MP tables. Modern OS use ACPI instead of legacy tables. Use Kconfig for reversable configuration if using old OS. BUG=b:62241143 Change-Id: I5fc833c8af47b5f6fad757e129250e6202810dbb Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/21963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2017-10-16console/flashconsole: Enable support for postcarYouness Alaoui
If FSP 2.0 is used, then postcar stage is used and the flashconsole as well as spi drivers needed to be added. Change-Id: I46d720a9d1fe18a95c9407d08dae1eb70ae6720e Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/21959 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16util/docker: add nasm to fix tianocore payload compilationPiotr Król
This patch address problem with Tianocore compilation in coreboot-sdk container. Without it compilation fails asking for nasm installation. Change-Id: I546f9d42b380799d1cd80a70f33be2a768745080 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/21924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martinroth@google.com>
2017-10-16mb/google/fizz: enable AER for PCIe root portsKane Chen
Enable PCIe Advanced Error Reporting for PCIe root port 2, 3, 4 ,8. BUG=b:64798078 TEST="lspci" shows that AER is enabled in the capabilities list. Change-Id: I6438250d674e7d06cdecd8f25fadebca1973721e Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/21946 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16src/soc/skylake: Fix Null pointer dereferencesShaunak Saha
Fix bug detected by coverity to handle the NULL pointer dereference Coverity Issues: * 1379849 * 1379848 TEST=Build and run on skylake platform Change-Id: Iec7a88a03531bbfeb72cedab5ad93d3a4c23eef5 Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/21909 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-16intel/common: CAR setup CQOSNaresh G Solanki
Enable CQOS on Geminilake. In Apololake, CBM_LEN is 0x7. Whereas the same in Geminilake is 0xF. Thus get CBM_LEN using cpuid instruction & generate CBM_LEN_MASK. Later use the CBM_LEN_MASK when writing to IA32_L2_MASK_* to set right bits. BUG=None TEST= Build for Geminilake platform i.e., glkrvp & check for successful CAR setup. Even verified the same on APL platform i.e., on Reef Change-Id: Ic736dba1a46629ff5bf3183082799c0c1468e6d9 Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com Reviewed-on: https://review.coreboot.org/21701 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2017-10-16soc/amd/common: Clean up file includesFrank Vibrans
Remove unnecessary header file includes. Change-Id: I9ad9e86f3c75903e278e898602caec04351f64b6 Signed-off-by: Frank Vibrans <frank.vibrans@scarletltd.com> Reviewed-on: https://review.coreboot.org/21989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16mainboard/pcengines/apu2: use GENERIC_SPD_BINKamil Wcislo
Use GENERIC_SPD_BIN method of adding the SPD bins to final rom. Change-Id: I242e393bafac41aa7743f83b52cadf027019ee6e Signed-off-by: Kamil Wcislo <kamil.wcislo@3mdeb.com> Reviewed-on: https://review.coreboot.org/21980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2017-10-16soc/amd/stoneyridge: Check UART indexMarshall Dawson
The Stoney Ridge APU has only two internal UARTs. Add checks for invalid settings. When enabling the UART, return if the console is on any UART not equal 0 or 1. The base address returned is 0 if an invalid configuration is used. All callers check the return value before using the returned value. Finally, provide an assert at the earliest availability of the console to get the notice into the cbmem console. BUG=b:62201567 TEST=Build with UART = -1, 0, 2. Inspect objdump and boot to OS. Build without ST UART and inspect with objdump. Change-Id: I9432571712bae15a604f4280ea5e0f81fd68604d Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16drivers/uart8250mem: Check for zero base addressMarshall Dawson
Before adding a new UART to the coreboot/lb table, verify that it has a non-zero base address. This is consistent with all other functions that use the uart_platform_base() function. This was tested on google/kahlee by using an invalid UART number and forcing the base address to 0. Execution was able to complete through depthcharge and into the OS. Change-Id: I6d8183a461f0fedc254bf88de5ec96629a2a80ef Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/21996 Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-16soc/amd/stoneyridge: Update AMD firmware placement optionsMartin Roth
- Don't force the selection of placing the firmware outside of cbfs when using vboot. - Set a prompt to allow the option of placing it outside of cbfs. - Leave all Kconfig defaults the same. - Place the AMD firmware directory table in the specified location even when using the 'outside of cbfs" option. - Print where the firmware is being placed when placing it outside of cbfs. BUG=b:65484600 TEST=Assign PSP firmware location, build & test. Firmware shows up inside CBFS. Set 'outside of cbfs' option, verify firmware gets written to the correct location. Change-Id: Ia8258b5c2ecfaaa42d623e3376ec3233115aed58 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/21867 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 09:35:18 +0000