summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-22ec/starlabs: Add standardised ITE EC supportSean Rhodes
Add EC support that supports different Q Events and EC memory. Created from the ITE IT5570E and IT8987E datasheets, all using data port 0x4e. Tested with Ubuntu 20.04.3 and Windows 10 on: * StarBook Mk V (TGL + IT5570E): * ITE Firmware 1.00 * Merlin Firmware 1.00 * LabTop Mk IV (CML + IT8987E): * ITE Firmware 1.04 * LabTop Mk III (KBL + IT8987E): * ITE Firmware 3.12 Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8023c26de23c874c84106fda96e64dcfa0c5ba32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58343 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Andy Pont <andy.pont@sdcsystems.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-22soc/intel/{adl,ehl,jsl,tgl}: Remove unused header `thermal.h`Subrata Banik
This patch removes unused header inclusion as <intelblocks/thermal.h> from several SoC finalize.c files. Change-Id: Ic9ac0ffb352686af22cc9d11b61f904238eef278 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59510 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-20soc/intel/alderlake: Hook up common code for thermal configurationSubrata Banik
Thermal configuration registers are now located behind PMC PWRMBASE for Alder Lake Point PCH. Hence, ADL SoC to select SOC_INTEL_COMMON_BLOCK_THERMAL_BEHIND_PMC to let thermal low threshold is being set as per mainboard provided `pch_thermal_trip`. Note: These thermal configuration registers are RW/O hence, setting those early prior to FSP-S helps coreboot to set the desired low thermal threshold for the platform. BUG=b:193774296 TEST=Dump thermal configuration registers PWRMBASE+0x150c etc. prior to FSP-S shows that registers are now programmed based on 'pch_thermal_trip' and lock register BIT31 is set. Change-Id: I0f972f47845c123f4f74fd75091c9703d54db796 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59271 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/alderlake: Set `pch_thermal_trip` for Dynamic Thermal ShutdownSubrata Banik
Set low maximum temp threshold value used for dynamic thermal sensor shutdown consideration. BUG=b:193774296 Change-Id: I7ee199c19a9d926a4135eeef3b3b481fbff74a79 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-20soc/intel/common/thermal: Allow thermal configuration over PMCSubrata Banik
Thermal configuration has evolved over PCH generations where latest PCH has provided an option to allow thermal configuration using PMC PWRMBASE registers. This patch adds an option for impacted SoC to select the Kconfig for allowing thermal configuration using PMC PCH MMIO space. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp platform. Change-Id: I0c6ae72610da39fc18ff252c440d006e83c570a0 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59209 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20ec/starlabs: Remove old EC codeSean Rhodes
Remove old code in favour of new format of firmware API. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Iaf8f37a08c232b8754e57f022782f21284fa07dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-20soc/intel/common/thermal: Use `clrsetbits32()` for setting LTTSubrata Banik
This patch uses `clrsetbits32` helper function to set thermal device Low Temp Threshold (LTT) value. BUG=b:193774296 TEST=Able to build and boot hatch and adlrvp with this change. Change-Id: I51fea7bd2146ea29ef476218c006f7350b32c006 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59310 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/common/thermal: Hook up IA thermal block to romstageSubrata Banik
This patch ensures IA common thermal block is now able to compile under romstage with necessary compilation issues fixed. BUG=b:193774296 Change-Id: I3279f55436977ab9a47e04455d8469e50b5c33c8 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59391 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-20soc/intel/common/thermal: Drop unused parameter of pch_get_ltt_value()Subrata Banik
`struct device *dev` as part of the pch_get_ltt_value() argument is being used hence, replace with `void`. BUG=b:193774296 Change-Id: Iecdf6f6c3023f896a27e212d7c59b2030a3fd116 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59390 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-19soc/intel/alderlake: Update the VccIn Aux Imon IccMax for ADL-MBora Guvendik
This patch updates the VccIn Aux Imon IccMax for ADL-M Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I21753f2e5e9867f22c05e087cbf1f1e097d28bca Reviewed-on: https://review.coreboot.org/c/coreboot/+/57325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-19mb/google/brya: Move EC_HOST_EVENT_USB_MUX wake event to S0ix onlyJoey Peng
If a USB_MUX_EVENT happens while the AP is in S3 during powerdown transtion (S0->S3->S5), this will cause the device to boot again after it has finished sequencing down to S5. Since S3 is not POR for ChromeOS devices anymore, change this event to wake from S3 and S0ix to just S0ix. BUG=b:206867635 TEST=emerge-brya coreboot Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Icdab40b6a845a34246d7da336f43e970f7908301 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59411 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-19Documentation: Add some notes about how to integrate FSPPatrick Georgi
While we don't _want_ FSP, we can't get around it sometimes. But when using it, we can still try to establish best practices to make life easier for everybody. Change-Id: I4efd273e4141dc6dc4cf8bdebda9cffd0d7cc1a1 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58886 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-19security/vboot: Add NVRAM counter for TPM 2.0Miriam Polzer
Create an NVRAM counter in TPM 2.0 that survives owner clear and can be read and written without authorization. This counter allows to seal data with the TPM that can only be unsealed before the counter was incremented. It will be used during Chrome OS rollback to securely carry data across a TPM clear. Signed-off-by: Miriam Polzer <mpolzer@google.com> Change-Id: I511dba3b3461713ce20fb2bda9fced0fee6517e1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59097 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-19mb/google/volteer/var/chronicler: set DdrMemoryDown enableSheng-Liang Pan
as doc #632048, there is a fix in MRC for this sighting but DdrMemoryDown need to be set to 1. BUG=b:192478111 BRANCH=volteer TEST=FW_NAME=chronicler emerge-volteer coreboot chromeos-bootimage Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: If7ead2d0bb2955a4f1b81d012ee2e2518b2a82e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59373 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-19util/inteltool/gpio.c: Correct register nameAngel Pons
Document 319973-003 (ICH10 datasheet) and document 324645-006 (6-series PCH datasheet) indicate that the name of this register is `GP_LVL3`, not `GPIO_LVL3`. Correct the name. Change-Id: I44cc41843c9f7cd0796bd198fb89447d787f155a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-19mb/google/brya/var/redrix: Configure _DSC for CAM devices to ↵Varshit B Pandya
ACPI_DEVICE_SLEEP_D3_COLD Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:199823938 TEST=Build and boot redrix to OS. Verify entries in SSDT and monitor LED during boot. Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I88ea1b87698c63e1bd69367ee857fba3f25c84ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/59260 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-19driver/intel/mipi_camera: Add support for _DSC fieldVarshit B Pandya
The _DSC (Device State for Configuration) object evaluates to an integer may be used to tell Linux the highest allowed D state for a device during probe. The support for _DSC requires support from the kernel bus type if the bus driver normally sets the device in D0 state for probe. The D states and thus also the allowed values for _DSC are listed below. Number State Description 0 D0 Device fully powered on 1 D1 2 D2 3 D3hot 4 D3cold Off More details can be found here https://lkml.org/lkml/2021/10/25/397 BUG=none BRANCH=none TEST=Add corresponding field in brya, boot and dump SSDT to check if _DSC field is as per expectation. Name (_ADR, Zero) // _ADR: Address Name (_HID, "OVTI8856") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Name (_DDN, "Ov 8856 Camera") // _DDN: DOS Device Name Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } Method (_DSC, 0, NotSerialized) { Return (0x04) } Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com> Change-Id: I5471f144918413a2982f86beaf3dbf7e4e66cc9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/58767 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-19Documentation/lint: Use Super I/O instead of SuperIOPatrick Georgi
Change-Id: Idb16092b687ebffb319bc1908f08f350d612d36a Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-11-19util/inteltool: Add ICH10D PCI IDAngel Pons
Add the PCI device ID for the ICH10D southbridge. While we're at it, also fix up whitespace in inteltool.h of an adjacent definition. Change-Id: I98d88a9ce27d3ddaafd7123ee51b2111a8bef019 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2021-11-19util/lint: Fix linters to work with coreboot-configuratorSean Rhodes
* Exclude .gif files from newline checking * Exclude coreboot-configurator from checkpatch checking Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I1b07b7b05340409e5c1695cc7bbdea68f8190097 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org>
2021-11-19mb/intel/adlrvp: Enable CPU PCIe RP 2Meera Ravindranath
Disabling CPU PCIe RP 2 (commit:3fd39467b Fix S0ix regression) causes regression in NVMe boot on ADL-P RVP boards. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b8b76a5537d8b80777cb7588ce6b22281af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59392 Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-18drivers/fsp: Rewrite post code hex values in lowercaseSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I65a83fcd69296f13c63329701ba9ce53f7cc2cb3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-18mb/google/guybrush: Add variant_tpm_gpio_tableRob Barnes
Add separate gpio table for TPM i2c and interrupt. Remove TPM gpios from early_gpio_table. This allows for initializing TPM gpios separately from other gpios. BUG=b:200578885 BRANCH=None TEST=Build and boot guybrush Change-Id: I51d087087b166ec3bb3762bc1150b34db5b22f2f Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59083 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-18mb/google/brya/var/felwinter: Correct USB3 TCSS settingEric Lai
Based on Intel Kit#615686, USB3 only needs to disable TBT and DMA per port. And if uses USB3 directly you need to set TcssAuxOri accordingly. BUG=b:206716691,b:205235144 TEST=USB function work as expected at USB3 only sku. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I303d042d6c80194ff48130fe4e9c04b49ca13ee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59385 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18mb/google/brya/var/gimble: Include 2 new SPDsMark Hsieh
Add SPD support to gimble for LPDDR4 memory part MT53E1G32D2NP-046 WT:B and MT53E512M32D1NP-046 WT:B. BUG=b:191574298 TEST=USE="project_gimble emerge-brya coreboot" and verify it builds without error. Signed-off-by: Mark Hsieh <mark_hsieh@wistron.corp-partner.google.com> Change-Id: Id3fc35605675b953bf993a29f35140f7721eedab Reviewed-on: https://review.coreboot.org/c/coreboot/+/59299 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-18mb/google/brya/var/redrix: De-assert SSD PERST# in romstageWisley Chen
After CB:57539 applied, it can support romstage GPIO table override. We can move SSD PERST# de-assertion to romstage. The reason for this is to give enough time after PERST# deassertion so that the SSD has enough time to initialize before the FSP scans the RPs for downstream devices. BUG=b:199714453 TEST=build Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I242cb1517f564d9d135d523b1e7f95ac34d601f8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18mb/google/brya/var/redrix: Correct WWAN power sequenceWisley Chen
Correct the WWAN power sequence to meet spec BUG=b:206079177 TEST=build Change-Id: Ibba1ecc04b563ae4eedd7596594f33812cbac150 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18mb/google/brya/var/redrix: Configure Acoustic noise mitigationWisley Chen
Enable Acoustic noise mitigation for redrix and set slew rate to 1/8 BUG=b:204009588 TEST=build and verified by power team Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I0fc0bb68c4de6fca60ee290eb46a77200d748ca8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58947 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18soc/intel/alderlake: Add Acoustic noise mitigation UPDsWisley Chen
This patch expose the following FSP UPD interface into coreboot: - AcousticNoiseMitigation - FastPkgCRampDisable - SlowSlewRate BUG=b:204009588 TEST=build Change-Id: I0b9c18f9b40d30525028e64754dd1dc86c3b2ec6 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-18amdfwtool: Call the set_efs_table for StoneyridgeZheng Bao
Related to https://review.coreboot.org/c/coreboot/+/58555 commit-id: 35b7e0a2d82ac In 58555, we added the SOC ID for Stoneyridge in amdfwtool command line. But it raised building error because it then called "set_efs_table" without setting SPI mode. So we skipped calling that. But in set_efs_table, it has case for Stoneyridge. The boards also need to have this setting. So we remove the skipping and give the proper SPI mode in mainboard Kconfig. Change-Id: I24499ff6daf7878b12b6044496f53379116c598f Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-18amdfwtool: Set flag comboable as bool typeZheng Bao
Fix the CL: https://review.coreboot.org/c/coreboot/+/58942 The type comboable was int but set as true. Change-Id: Id2c43378735c089a27a5aa683b55a0f7ec3677de Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-18amdfwtool: Add a union for combo and psp directoryZheng Bao
For combo layout, this is for combo header. For non-combo layout, this is for PSP directory. Change-Id: Ie7b5aec6b511ad61972908d1d22a13aeb7dd73a9 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58557 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-18doc/mb/ocp: update Delta Lake documentationJonathan Zhang
Update Delta Lake document following the publish of OCP blog and the Wiwynn press release. Signed-off-by: Jonathan Zhang <jonzhang@fb.com> Change-Id: I3eaa765bf9918988b4b5cb01e8607a5c27b9bd17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58979 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com> Reviewed-by: Christian Walter <christian.walter@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-17mb/google/brya/var/felwinter: Add MT53E1G32D2NP-046 WT:B SPDEric Lai
Add MT53E1G32D2NP-046 WT:B SPD. BUG=b:205669003 TEST=Boot up without issues. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: If084a8af941b36a8f3f608271078e32b093d9108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59348 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/cyan: use shared touchpad/touchscreen interruptsMatt DeVillier
Windows (10/11) freaks out and generates an interrupt storm if two ACPI devices are enabled and share an interrupt, even when only one device is actually present. To mitigate this, mark Cyan's touchpad/touchscreen interrupts as SharedAndWake rather than ExclusiveAndWake. Test: build/boot Windows 10 on Relm, observe normal CPU usage in Task Manager for System Interrupts task when touchpad/touchscreen in use. Change-Id: I09bc878318f9fa6252f65a42ad46109418805fa0 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59336 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17security/vboot: Use default kernel secdata sizeTim Wawrzynczak
When fetching antirollback information for the kernel, it is not always known ahead of time what the current size of the kernel secdata area is. If the incorrect size is passed, the TPM will return back the correct size, but at the cost of an extra transaction; when using cr50 over I2C, this can be as much as 20ms. Currently, the first attempt uses the minimium size (aka version 0 or 0.2), and if another size is used (which is the case for all modern cr50-based boards, version 1 or 1.0), then a transaction is wasted on every boot. Therefore, change the default size sent to the TPM to be the default one used in the VB2 API instead of the minimum one. BUG=b:201304784 TEST=verify TPM initialization time drops by ~20ms. Also the Kernel NV Index is read correctly in the BIOS logs. src/security/tpm/tss/tcg-2.0/tss.c:231 index 0x1007 return code 0 src/security/tpm/tss/tcg-2.0/tss.c:231 index 0x1008 return code 0 504:finished TPM initialization 99,953 (65,606) Change-Id: I22d9c0079bb1175f24ff7317d116e79aa5ba08ed Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58669 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-17security/tpm/tcg-2.0: Handle TPM_RC_NV_RANGE return codeKarthikeyan Ramasubramanian
As per the TPM spec, if offset and the size field of data add to a value that is greater than the dataSize field of the NV Index referenced by nvIndex, the TPM shall return an error (TPM_RC_NV_RANGE). Handle the TPM error and map it to an appropriate vboot error. BUG=None TEST=Build and boot to OS in Guybrush. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I8b403e2f33cc1368065cc21f73df1102695f73eb Reviewed-on: https://review.coreboot.org/c/coreboot/+/59134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-17mb/google/trogdor: Adjust mipi panel backlight gpioZanxi Chen
According hareware design, mipi panel backlight relies on AP_BKLTEN(GPIO_12) and TP_EN(GPIO_85). Meanwhile, TP_EN(GPIO_85) needs pull up to enable PP3300_DISP_ON before AP_BKLTEN(GPIO_12) up. BUG=b:197709288,b:199081803,b:205166230 BRANCH=trogdor TEST=emerge-strongbad coreboot Change-Id: Ie9920e5366f6b1ea9e0da228bd211317516b390a Signed-off-by: Zanxi Chen <chenzanxi@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-17mb/google/brya/var/taeko: Correct touchpad GPE settingsJoey Peng
Correct GPE settings so touchpad can wake up DUT. BUG=b:206526991 TEST=emerge-brya coreboot and builds without error Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I1978e9220ad7a275d351ad5eeff7036131926b24 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59345 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/brya/var/taeko: disabled autonomous GPIO power managementJoey Peng
Used H1 firmware where the last version number is 0.0.22, 0.3.22 or less to production that will need to disable autonomous GPIO power management and then can get H1 version by gsctool -a -f -M BUG=b:205315500 TEST=emerge-brya coreboot and test that DUT can boot to OS. Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ib26797fa2d4d0b1a6eb28c5d79b9ac0a6054abd8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59325 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17Revert "soc/intel/adl: Drop SGPM, RGPM and EGPM methods"Maulik V Vaghela
This reverts commit 1399442289607acc5203fb12df64e9081b3c3aa4. Reason for revert: Some Cr50 chips with old firmware version (x.y.22) don't support long pulse interrupt command, requiring dynamic GPIO PM to be disabled to intercept short pulse interrupt. Due to this coreboot needs to expose SGPM, RGPM and EGPM ACPI methods to support power gating of GPIO communities from the kernel when dynamic GPIO PM is disabled. BUG=b:204832081 BRANCH=None Test= S0ix works with dynamic PM disabled. Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Change-Id: I2b5b00878062f8a499641d7a47db54ed078cd6cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/58811 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2021-11-17mb/google/brya/variants/primus: Correct SSD power sequenceCasper Chang
SSD sometimes can't be detected in in warm/cold boot stress. M.2 spec describes SSD_PERST# should be sequenced after power enable. BUG=b:199967106 TEST=SSD was always discovered in warm/cold boot stress. Signed-off-by: Casper Chang <casper_chang@wistron.corp-partner.google.com> Change-Id: I74c21cd96cf1c4518c4ed7c0b3b39e915b6b1ff7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/brya: Enable early EC syncBoris Mittelberg
Enable VBOOT_EARLY_EC_SYNC in corebot BUG=b:201356952 BRANCH=None TEST=Tested on Brya id 2 Signed-off-by: Boris Mittelberg <bmbm@google.com> Change-Id: I6e480d64a5d90d5bb9cf59ed60b7b53af9edf46a Reviewed-on: https://review.coreboot.org/c/coreboot/+/59274 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/hatch: Add VBTs for variantsMatt DeVillier
Add VBTs for all hatch variants currently supported by ChromeOS recovery images. For variants which use multiple VBTs and select at runtime, ensure these are added directly to CBFS. Change-Id: I3c62ce204e3272e778ba0a34f7a47a65d8125f53 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/hatch: Alphabetize variants in Kconfig.nameMatt DeVillier
Change-Id: Ie29242e635bae1e2754bc1109754a64cb496af29 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/brya: Move typeC AUX configuration to variantEric Lai
TypeC AUX configuration is variant specific. So move into variant level. BUG=b:205235144 TEST=No typeC port 0 AUX in felwinter. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I02bfea462cf4c6359fd8d5cca4368786ee03bc8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59290 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/guybrush: Update SPKR GPIO configuration for guybrush/nipperkinKevin Chiu
For Guybrush Board Version 2, Nipperking Board Version 1, update SPKR GPIO to match H/W schematic: SPKR: GPIO31 For Nipperkin Board Version 2, update SPKR GPIO to match H/W schematic: SPKR: GPIO70 BUG=b:202992077 BRANCH=guybrush TEST=emerge-guybrush coreboot chromeos-bootimage Change-Id: I3d82292b116f53d85d9518364ffd2169bd915a7e Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59051 Reviewed-by: Rob Barnes <robbarnes@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-17soc/amd/psp_verstage: Split up verstage_soc_initRob Barnes
Make psp verstage initialization more granular be splitting verstage_soc_init into separate functions. Specifically, create soc init functions for espi, i2c spi, and aoac. BUG=b:200578885 BRANCH=None TEST=Build and boot guybrush Change-Id: I489889a0dfd4016aa4f2b53a2c6a7a1ea4459e60 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2021-11-17mb/google/octopus: Add missing VBTs for variantsMatt DeVillier
Add VBTs for all octopus variants currently supported by ChromeOS recovery images. For variants which use multiple VBTs and select at runtime, ensure these are added directly to CBFS. Change-Id: I4b5c4268f9255d658f9762d94488db66e0677830 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59327 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/octopus: Alphabetize variants in Kconfig.nameMatt DeVillier
Change-Id: I2e57c4f1baa8a42bde2642e7f76ddead7bfd6a58 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/google/slippy/peppy: use shared touchpad interruptsMatt DeVillier
Windows (10/11) freaks out and generates an interrupt storm if two ACPI devices are enabled and share an interrupt, even when only one device is actually present. To mitigate this, mark Peppy's interrupts as Shared rather than the default of Exclusive. Test: build/boot Windows 10 on Peppy, observe normal CPU usage in Task Manager for System Interrupts task when touchpad in use. Change-Id: Ida78ddec3105cef6581cdde78da2e2c97d983a0a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/siemens/mc_ehl1: Send POST codes to NC FPGA via PCIWerner Zeh
This board does not have a LPC or eSPI connection to the NC FPGA anymore and therefore IO port 0x80 is not useable for POST codes anymore. Enable the feature of sending the POST codes to the NC FPGA via PCI so that the POST codes are visbile again in coreboot. Change-Id: I9043e4ec9a2ad6b946e373bb3dce9da3d42d00d1 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-11-17drivers/siemens/nc_fpga: Add POST code over PCIWerner Zeh
So far POST codes were mapped on IO port 0x80 inside the NC FPGA which was connected via the LPC bus to the host CPU. On recent x86 generations the LPC bus was replaced with eSPI and not all Siemens boards have the eSPI routed to the NC FPGA. In order to have POST codes visible on those boards the display is accessible via PCI in addition. This patch adds the feature of sending the POST codes to the NC FPGA via a PCI mapped register. Change-Id: Ie15686de49cface17830365d78fe7c54cce183a0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-11-17cbfs: Add helper functions to look up size and type of a fileJulius Werner
This patch adds cbfs_get_size() and cbfs_get_type() helper functions (and _ro_ variations) to look up the size or type of a CBFS file without loading it. Generally, use of these should be discouraged because that tends to mean that the file needs to be looked up more than once, and cbfs_alloc() or cbfs_type_load() are usually the more efficient alternative... but sometimes they're unavoidable, so we might as well offer them. Also remove the <cbfs_private.h> header which had already become sort of unnecessary with previous changes. cbfs_boot_lookup() is now exported in <cbfs.h> for use in inlines, but should not be used directly by other files (and is prefixed with an underscore to highlight that). Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I8092d8f6e04bdfb4df6c626dc7d42b402fe0a8ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/59312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2021-11-17soc/mediatek/mt8186: Add RTC and clkbuf driversYuchen Huang
Add support for RTC and clkbuf. TEST=boot to kernel and check log ok BUG=b:202871018 Signed-off-by: Yuchen Huang <yuchen.huang@mediatek.corp-partner.google.com> Change-Id: Ia02a74f685feb2466c113a77cbfa3a7d8fedb595 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59344 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Add mtcmos init supportChun-Jie Chen
Add mtcmos to support display and audio. TEST=build pass BUG=b:202871018 Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: Ib9d41d47f235376f524c3ff78f1fcc069cbc60cd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59343 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17mb/google/corsola: Initialize SPMRex-BC Chen
Initialize SPM (System Power Management) in RAM stage. This adds 55ms to the boot time. TEST=program counter of SPM is correct value(0x250) after booting up BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I822417f7a679107760b202dd43fb79d1934940bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/59342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: add SPM loaderRex-BC Chen
This patch adds support for loading SPM firmware from CBFS to SPM SRAM. SPM needs its own firmware to enable SPM suspend/resume function which turns off several resources such as DRAM/mainpll/26M clk when linux system suspend. TEST=program counter of SPM is correct value(0x250) after booting up BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia13e5a2ecf09561856b7e958128cd2f045c39f33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59341 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-17soc/mediatek/mt8186: initialize SSPMRex-BC Chen
SSPM is "Secure System Power Manager" that provides power control in secure domain. The initialization flow is to load SSPM firmware to its SRAM space and then enable. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I92eb501a1e48dd02d2f94ff392933261e6a42391 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek: move MSDC drivers to soc folderRex-BC Chen
Setting of MSDC is defined by soc, so we move them to soc folder. TEST=emerge-cherry coreboot; emerge-asurada coreboot Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I84ad8a4cde120c97024870ebf750d44b36c2284d Reviewed-on: https://review.coreboot.org/c/coreboot/+/59339 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Enable DCMEdward-JW Yang
DCM (dynamic clock management) can dynamically slow down or gate clocks during CPU or bus idle. Enable DCM settings on the MT8186 platform. TEST=build pass and check register ok BUG=b:202871018 Signed-off-by: Edward-JW Yang <edward-jw.yang@mediatek.corp-partner.google.com> Change-Id: I82add5ae629d59f7d6773e26ac9cba9d54ab8caf Reviewed-on: https://review.coreboot.org/c/coreboot/+/59338 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek/mt8186: Add I2C driver supportHousong Zhang
Add I2C controller drivers. TEST=build pass BUG=b:202871018 Signed-off-by: Housong Zhang <housong.zhang@mediatek.corp-partner.google.com> Change-Id: Ia3800e3a30b0796a64213d3b1ab688580c6ddbca Reviewed-on: https://review.coreboot.org/c/coreboot/+/59296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/mediatek: move i2c function to common folderRex-BC Chen
Move mtk_i2c_max_step_cnt, mtk_i2c_check_ac_timing, mtk_i2c_speed_init and mtk_i2c_calculate_speed to common folder to share with MT8186. TEST=test on tomato ok TEST=emerge-asurada coreboot BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I4a702741c763bf9261cea90d0d71c08b6e28c261 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-17soc/intel/../thermal: Fix return type of `pch_get_ltt_value()`Subrata Banik
This patch modifies the pch_get_ltt_value() function return type from uint16_t to uint32_t to accommodate platforms with more than one thermal threshold. For example: Alder Lake PCH Trip Point = T2L | T1L | T0L where T2L > T1L > T0L. BUG=b:193774296 Change-Id: I5f46ccb457b9cfebf13a512eabb3fb0fab8adb39 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59311 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-17mb/intel/adlrvp: Fix sagv point3 clipping to 4800MhzBora Guvendik
Update board type to 4 as per MRC team's input. This fixes LP5 sagv point 3 being clipped from the expected 5200Mhz to 4800Mhz. TEST=Boot to OS, verify frequency locked. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I9472aec41537425c1ed648b949f484939ee9ff99 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58373 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17util/mb/google: Change comments in memory Makefile.inc templatesReka Norman
Begin comments with # instead of ## to match the Makefile.inc generated by spd_tools. BUG=None TEST=None Signed-off-by: Reka Norman <rekanorman@google.com> Change-Id: If2d716a7338fd5af8216b2bcd894fc88a9df137e Reviewed-on: https://review.coreboot.org/c/coreboot/+/59297 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-17mb/intel/adlrvp: Fix S0ix regressionMeera Ravindranath
The following changes are needed to fix S0ix regression on RVP 1) Disable Clk src 3 2) Disable Ext FIVR settings TEST=Boot adlrvp to OS, confirm S0ix is working. Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b8b76b5527d8b80776cb7588ce6b12281af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
2021-11-17mb/google/brya/variants/primus: enable ALC5682I-VSMalik_Hsu
In next phase build, the audio codec will change to ALC5682I-VS BUG=b:205883511 TEST=emerge-brya coreboot chromeos-bootimage and check audio function Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I5906ef9bb88da7fe450a986bf7dd1ee701227f95 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-16src/lib/prog_loaders: Add preload_ramstageRaul E Rangel
This will enable preloading ramstage. By preloading the file into cbfs_cache we reduce boot time. BUG=b:179699789 TEST=Boot guybrush to OS and see 12ms reduction in boot time. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ibe12de806449da25bc0033b02fcb97c3384eddc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-16lib/prog_loaders, soc/amd/: Make payload_preload use cbfs_preloadRaul E Rangel
Now that CBFS has this functionality built in, we no longer need to manually code it. payload_preload used to use the payload_preload_cache region to store the raw payload contents. This region was placed outside the firmware reserved region, so it was available for use by the OS. This was possible because the payload isn't loaded again on S3 resume. cbfs_preload only uses the cbfs_cache region. This region must be reserved because it gets used on the S3 resume path. Unfortunately this means that cbfs_cache must be increased to hold the payload. Cezanne is the only platform currently using payload_preload, and the size of cbfs_cache has already been adjusted. In the future we could look into adding an option to cbfs_preload that would allow it to use a different memory pool for the cache allocation. BUG=b:179699789 TEST=Boot guybrush and verify preloading the payload was successful CBFS DEBUG: get_preload_rdev(name='fallback/payload') preload successful Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc521b238620ff52b8ba481cd3c10e5c4f1394bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/58962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-16qualcomm/sc7280: gpio: Support eGPIO schemeTaniya Das
eGPIO is a scheme which allows special power island domain IOs to be reused as regular chip GPIOs by muxing regular TLMM functions with Island Domain functions. Allow the eGPIO to be configured via gpio_configure API to be used as a TLMM gpio. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Signed-off-by: Taniya Das <quic_tdas@quicinc.com> Change-Id: Ib2598a41ba3bb8a8a2acff8253b5bb78633f89f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58580 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2021-11-16mb/google/brya/var/redrix: Update dsm parameters for speeker/tweeterWisley Chen
For tuning, redrix needs differnet dsm paramters file for L/R speeker/tweeter. BUG=b:204841998 TEST=build Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: I6f93603a6809f9a5aea9f2e554935de5d0457286 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-16soc/intel/../thermal: Drop `ltt_value` local variableSubrata Banik
Using the `GET_LTT_VALUE` macro directly instead of 'ltt_value' local variable. BUG=b:193774296 Change-Id: I791766bf2a78fa30dbba8cf4ad8a50e44f0e73ed Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-16soc/mediatek/mt8186: add early initialization for eMMCRex-BC Chen
Some eMMCs need 80+ms for CMD1 to complete. And the payload may need to access eMMC in the very early stage (for example, depthcharge needs it 20ms after started) so we have to start initialization in coreboot. TEST=boot kernel from eMMC ok BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I3bc06b1fc506b1d6f54f7f456117d22477a87e29 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16mb/google/corsola: Configure eMMC and SD CardWenbin Mei
The Corsola reference design has both eMMC and SD Card interfaces so we have to configure both in RAM stage. TEST=boot kernel from eMMC and SDCard ok BUG=b:202871018 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I0fa8712eb61685a305dc5dd49cc2e55f1f0eecd4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59293 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8186: Configure eMMC and SD CardWenbin Mei
The Corsola reference design has both eMMC and SD Card interfaces so we have to configure both in RAM stage. TEST=build pass BUG=b:202871018 Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Change-Id: I2f26a8a11edd29a80a7195e3a324151d66ecb293 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-16soc/mediatek/mt8195: Add message string when using _Static_assertFlora Fu
The _Static_assert without message string is only available since C++17. Add the message to avoid build fail in the macro. BUG=b:203145462 BRANCH=cherry TEST=build pass and boot pass Signed-off-by: Flora Fu <flora.fu@mediatek.com> Change-Id: Ib146ffafc21b9dbb9d383c9343a9ec1d7c478faf Reviewed-on: https://review.coreboot.org/c/coreboot/+/59298 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-16mb/google/brya/var/vell: Generate LP5 RAM IDKevin Chiu
Add the support LP5 RAM parts for vell: DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) MT62F1G32D4DR-031 WT:B 1 (0001) BUG=b:204284866 TEST=emerge-brya coreboot Change-Id: I49745948ebdb25fd98e285defd75714f80271968 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59288 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2021-11-16mb/google/guybrush: Make GPIO_69 default for SD_AUX_RESET_LRob Barnes
In CL:3248796 GPIO_5 was made the default for SD_AUX_RESET_L. No variant is actually using GPIO_5 for SD_AUX_RESET_L. Making GPIO_69 the default and only overriding to GPIO_70 for guybrush bid==1. BUG=b:202992077 BRANCH=None TEST=Build and boot guybrush, SD card works Change-Id: I6546ad9961f6f7146aa3aefc35d39a2eb282a252 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59053 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-15soc/intel/alderlake: Fix build failure with enabled CSE stitchingBernardo Perez Priego
The following error is observed when building coreboot with CSE stitching enabled. `src/soc/intel/alderlake/Makefile.inc:62: *** missing separator. Stop.` This change prevents such error. BUG=None TEST=Enable CSE stitching, build should complete successfully. Change-Id: I1d9f442d1e1e7be4e8bbd1e653ed0ae6b7475f45 Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15sc7280: Add CPUCP firmware supportRavi Kumar Bokka
CPUCP is CPUSS Control Processor. It refers to the firmware for control CPUSS active power management. BUG=b:182963902 TEST=Validated on qualcomm sc7280 development board Change-Id: Idac22c8cb231658616999bc577bdf49f9aa7ae74 Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49768 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-15mb/google/brya/var/redrix: Hook up two missing sensorsWisley Chen
Redrix has 4 thermal sensors, so add the missing sensors settings. BUG=b:200134784 TEST=build and verified by thermal team. Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Change-Id: Ia9c58129d439ade21e96896c5e593cd08a627603 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2021-11-15mb/google/herobrine: Use same I2C/SPI configs for piglin and hoglinShelley Chen
As Hoglin variant was recently added, need to make sure that it uses the same configs as piglin. BUG=b:197366666 BRANCH=None TEST=create hoglin image and make sure that it boots on CRD 2.0 Change-Id: I14497a205262ac1081c24631e4fd8d39bb804fce Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59273 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-15soc/amd/common/block: Add spi_hw mutexRaul E Rangel
There are currently two users of the SPI hardware, the LPC SPI DMA controller, and the boot_device_rw device. We need to ensure exclusivity to the SPI hardware otherwise the SPI DMA controller can be interrupted and it will silently skip transferring some blocks. Depending on the SPI speed, this change might add a small delay when clearing the elog since a DMA transaction might be in flight. I'll continue optimizing the boot flow to avoid the delay. BUG=b:179699789 TEST=Hack up the code to interleave SPI transactions and verify this patch fixes the silent data corruption. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5eee812a6979c8c0fb313dd2fbccc14b73d7d741 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58926 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-15device/pci_rom: Add vga_oprom_preloadRaul E Rangel
This method will allow preloading the VGA_BIOS_FILE. By preloading the file, into cbfs_cache we reduce boot time. In the future we can also add support for loading the second VGA_BIOS_FILE and the DGPU VGA_BIOS_FILE. BUG=b:179699789 TEST=Boot guybrush to OS and verify 12 ms reduction in boot time Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Icb54fe3a942e9507ff6f1173ba5620a8f4ce6549 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56581 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-15lib/hardwaremain: Run timers more frequentlyRaul E Rangel
This change makes it so the timers run after each boot state callback, and after each boot state. This gives coop threads the opportunity to run more frequently and predictably. BUG=b:179699789 TEST=Boot guybrush to OS, see SPI transactions progress faster. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9508e7777d52fe934cc09d486abc0dab5cf7dad8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58955 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-15Reland "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
This reverts commit adb393bdd6cd6734fa2672bd174aca4588a68016. This relands commit 6260bf712a836762b18d80082505e981e040f4bc. Reason for revert: The original CL did not handle some devices correctly. With the fixes: * commit 36721a4 (mb/google/brya: Add GPIO_IN_RW to all variants' early GPIO tables) * commit 3bfe46c (mb/google/guybrush: Add GPIO EC in RW to early GPIO tables) * commit 3a30cf9 (mb/google/guybrush: Build chromeos.c in verstage This CL also fix the following platforms: * Change to always trusted: cyan. * Add to early GPIO table: dedede, eve, fizz, glados, hatch, octopus, poppy, reef, volteer. * Add to both Makefile and early GPIO table: zork. For mb/intel: * adlrvp: Add support for get_ec_is_trusted(). * glkrvp: Add support for get_ec_is_trusted() with always trusted. * kblrvp: Add support for get_ec_is_trusted() with always trusted. * kunimitsu: Add support for get_ec_is_trusted() and initialize it as early GPIO. * shadowmountain: Add support for get_ec_is_trusted() and initialize it as early GPIO. * tglrvp: Add support for get_ec_is_trusted() with always trusted. For qemu-q35: Add support for get_ec_is_trusted() with always trusted. We could attempt another land. Change-Id: I66b8b99d6e6bf259b18573f9f6010f9254357bf9 Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-15mb/siemens/mc_ehl2: Adjust PCIe clock source settings in devicetreeMario Scheithauer
With latest hardware revision all clock outputs will be used on this mainboard. For this reason set all clock source mappings to 'PCIE_CLK_FREE' to have a free running clock. Change-Id: Ic3f6fb4e24128742ed72dade7a4555c39fb722ae Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59259 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-15mb/siemens/mc_ehl: Disable HECI #2 deviceMario Scheithauer
HECI #2 is not used for CSE communication. Therefore, it is not necessary to set the parameter 'Heci2Enable' in devicetree. Change-Id: I7012e4d877a464699727ca775af3f9965e0602e9 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58940 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-15soc/intel/alderlake: Disable VT-d for early siliconsMeera Ravindranath
VT-d needs to disabled for early silicons as it results in a CPU hard hang. BUG=b:197177091 Test=Boot brya to OS with no hang Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Change-Id: I0b9b76b6527d8b80777cb7588ce6b12282af7882 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2021-11-15mb/google/brya/var/felwinter: Disable PCIE port 6Eric Lai
PCIE port 6 is empty as per schematics. BUG=b:206047996 TEST=PCIE port 6 is disabled. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I30fa897c9310c44545e3df670895639a5144e1de Reviewed-on: https://review.coreboot.org/c/coreboot/+/59243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15mb/google/brya/var/felwinter: Remove USB2 port 0Eric Lai
USB2 port 0 is empty as per schematics. BUG=b:206047996 TEST=USB2 port 0 is disabled. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I45d467a80c23d82dc33dcbed176430a758eea403 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15mb/google/brya/var/felwinter: Enable garage pen detectionEric Lai
Enable garage pen detection. BUG=b:197912223 TEST=Check evtest can trigger event when toggling the switch. Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ib5929c876d1a0da34dadd7997a61ab8e75acbbb6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59234 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15amdfwtool: Set soc name for StoneyridgeZheng Bao
For the stoneyridge, soc_name is not set in Makefile, so set_efs_table is not called. Keep it unchanged. Change-Id: I0e82188ce64733420a578446e22a077ef789be92 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-15soc/amd/stoneyridge/include/pci_devs: remove unused DEVID definesFelix Held
None of the *_DEVID defines was used in the code, so drop those. The SoC code uses the PCI ID defines from include/device/pci_ids.h instead. Since it might still be useful to have the PCI device IDs as a reference in the SoC's pci_devs.h, add those as comments instead. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7c77d648dac57b15b56f631bd8b2494676c00a8b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-15mb/google/brya/variants/primus: enable RTD3 for PCIe-eMMC bridgeMalik_Hsu
Enable RTD3 driver for PCIe-eMMC bridge, If the board version is less than 1, do not enable RTD3 driver. BUG=b:204469567 TEST=Boot into eMMC storage and perform suspend stress 100 cycle passed Signed-off-by: Malik_Hsu <malik_hsu@wistron.corp-partner.google.com> Change-Id: I5836d65cedfe3907af2c4c33de7a396c4bb8b727 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15drivers/wifi/generic: fix package_size to align with WLAN driverMatt Chen
Change to use MAX_DSAR_SET_COUNT which WLAN driver always expects 3 no matter what the revision is for EWRD. It will pass the WLAN driver check then to retrieve the data properly. BUG=b:204414616 TEST= tested on brya with DRTU tool to verify if SAR table is read properly or not. Change-Id: I18e7d5f658bbf42b7eeed3da330508f14b86c0f8 Signed-off-by: Matt Chen <matt.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15mb/google/brya/variants/gimble: Update PL1 min valueSumeet Pawnikar
Update PL1 minimum value from 3W to 12W as per the thermal design discussed in this bug 203371203 comment #10. BUG=b:203371203 BRANCH=None TEST=Build and boot the gimble system Change-Id: Id66cfb6f6dc0217bd4d83eae1d66ad867a1bdb46 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15vendorcode/intel/fsp: Add Alder Lake FSP headers for FSP v2422_01Ronak Kanabar
The headers added are generated as per FSP v2422_01. Previous FSP version was v2374_01. Changes Include: - Add CnviDdrRfim UPD in FspmUpd.h - UPDs description update in FspmUpd.h BUG=b:205512463 BRANCH=None TEST=Build and boot brya Change-Id: Id25f7199ffd08a4a74585ea1269d927efa733b8c Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-15mb/google/brya/var/kano: Add thermal sensor settingsDavid Wu
Kano has 3 thermal sensors, so add the missing sensor settings. BUG=b:205648035 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I0da25f142149f94c83fdf7b2ba2cb8694cddb412 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 18:56:36 +0000