| Age | Commit message (Collapse) | Author |
|---|
|
Sabrina is compatible with the common AMD SOC_AMD_COMMON_BLOCK_IOMMU
code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4c2e8553fde9467ca1b5e9085e36c33d138b7156
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61633
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
There is no need to have the iommu_set_resources function which only
calls pci_dev_set_resources, so assign pci_dev_set_resources directly to
the set_resources function pointer field in the iommu_ops struct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I59c20e61a36fcc11b59d786139b4745ff662e560
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This comment was added with the AMD family 15h Trinity IOMMU support in
commit 88ebbeb7e2a914330c869147bacb190b4270532f and looks like a copy of
the comment about the subtractive decode ranges in the LPC device. The
IOMMU doesn't have any subtractively decoded I/O or MMIO ranges and this
is also not what the code does. This resource is the MMIO region to
configure the IOMMU instead, so fix the comment in all copies of the
IOMMU support code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2e1e3a46b839b9e58b836932c1bc9b41b1b1dc02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61631
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Sabrina is compatible with the common AMD ACPIMMIO function block
mapping and access functions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I890375654a9cb1156e481c5586007ac81ab84120
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61626
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The PM2 ACPIMMIO region should only be accessed with 8 bit accesses.
Using 16 or 32 bit read accesses will return the data from the first
byte for all 2 or 4 bytes and 16 or 32 bit write accesses will result in
only the first byte being written which is both unexpected behavior.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5ace50d3b81b5bf3ea3b10aa02f25c58a6ea99b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61625
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Bit 23 in the PM_RST_STATUS register is called LtReset on Stoneyridge
and ShutdownMsg on Picasso/Cezanne/Sabrina. Bit 30 is reserved on
Stoneyridge and defined as SdpParityErr on the newer SoCs. Bit 31 is
only defined for Sabrina. Since the default value of undefined bits is 0
it isn't a problem to have descriptions for reserved reset status bits
on some SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I0782116d327fcad3817a10eb237ac6c8294846b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61624
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Implementation for setup_lapic() did two things -- call
enable_lapic() and virtual_wire_mode_init().
In PARALLEL_MP case enable_lapic() was redundant as it
was already executed prior to initialize_cpu() call.
For the !PARALLEL_MP case enable_lapic() is added to
AP CPUs.
Change-Id: I5caf94315776a499e9cf8f007251b61f51292dc5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58387
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Leftover from using UDELAY_LAPIC on these platforms.
Change-Id: I718050925f3eb32448fd08e76d259f0fb082d2d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
When sending self an IPI, some instructions may be processed
before IPI is serviced. Spend some time doing nothing, to
avoid entering a printk() and acquiring console_lock and
dead-locking.
Change-Id: I78070ae91e78c11c3e3aa225e5673d4667d6f7bb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60213
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This avoids unnecessary passing of APIC ID parameter and
allows some minor optimisation for X2APIC mode.
Change-Id: I0b0c8c39ecd13858cffc91cc781bea52decf67c5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: I790fddea747f5db0536159e6c2ac90ea1da2830e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60712
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The options X2APIC_ONLY and X2APIC_RUNTIME were already user-visible
choices in menuconfig, but the functionality was not actually provided
except for platforms where FSP presumably enabled X2APIC.
Add the logic and related logging for switching to X2APIC operation.
TEST: qemu-system-x86_64 -M Q35 -accel kvm -bios coreboot.rom -serial
stdio -smp 2
PARALLEL_MP, and either X2APIC_ONLY or X2APIC_RUNTIME, need to be
selected for the build of emulation/qemu-q35.
Change-Id: I19a990ba287d21ccddaa64601923f1c4830e95e9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55262
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
|
|
Even when we're not in X2APIC mode, the information in CPUID
leaf 0xb will be valid if that leaf is implemented on the CPU.
Change-Id: I0f1f46fe5091ebeab6dfb4c7e151150cf495d0cb
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58386
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I9f7c4bdd9299e686c375aced221a72994ef2d6ed
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61556
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
The CNVi Wifi controller is considered an untrusted device for ChromeOS,
therefore enable the new UntrustedDevice property for the cnvi_wifi
device on all brya & brask boards.
BUG=b:215424986
TEST=dump SSDT on google/redrix, verify it contains the expected
UntrustedDevice property
Change-Id: Ieff6eea0865125a7c0f626e1981dda1c9532ebb1
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61385
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The Linux kernel has the idea of an "untrusted" PCI device, which may
have limited I/O and memory access permissions, depending on which IOMMU
domains it may be a part of.
https://crrev.com/c/3406512 is a backport to the ChromiumOS kernel which
checks for this property.
BUG=b:215424986
TEST=dump SSDT on google/redrix, verify it contains the expected
UntrustedDevice property
Change-Id: I1a02ca7c5f717097ec97cf6373b9e0b81a13e05d
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Some Intel SoCs such as Denverton support additional SPI regions for
things like Innovation Engine firmware or 10GbE LAN firmwares
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Change-Id: Ia5a450e5002e9f8edee76ca7c2eede9906df36c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60829
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The memory speed values in SMBIOS tables are expressed in MT/s, not MHz.
Adjust the reported frequency values accordingly.
Change-Id: If34827fee582ef10057e7540b9d23d8c74bd2a32
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61504
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sabrina has no SATA controller, so remove the corresponding PIRQ
mapping. This was verified with PPR #57243 Rev 1.53.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I98ffa3675c361e8a74c50ebfc37e79ae63dacc85
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61601
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The common AMD data fabric register access code is valid for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I97fb2c6006c09297584845a83342e75058d35713
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61600
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The common AMD SMU code and the common AMD SMN access code that gets
selected by the common SMU code are valid for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic220dbb2f73b89554ac7e7b7e6dc7525ae8e9faa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61599
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The common AMD FCH AOAC bit definitions and helper functions are correct
for Sabrina.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie791cca0dc760e53e0f5c69c63ac78270ba6ad4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61598
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This change is added to address the issue of USB3 ports downgrading to
high speed during low power modes and not returning back to super speed.
The patch enables port reset event on USB2 ports. This event is
is passed to USB3 upstream ports to upgrade back to super speed (USB3)
after a downgrade during low power state
BUG=b:193287279
TEST=Built coreboot on Gimble and tested type A pen drive detects as
super speed device
Change-Id: Iabc6f308992bf3868da66f152c6d7b0164e64bea
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61536
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch makes a slight change in the way CONSOLE_LOG_FAST and
CONSOLE_LOG_ALL are differentiated, by no longer passing a different
tx_byte() function pointer and instead using the `data` argument to
vtxprintf() to encode the difference. It also passes the message log
level through to the tx_byte() function this way, which will be needed
in the next patch.
Change-Id: I0bba134cd3e70c2032689abac83ff53d7cdf2d7f
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61580
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Sabrina uses an identical I2C controller as Picasso and Cezanne. Also
both the type and version read-only register of the I2C controller
contain identical values.
The dma_cr, dma_tdlr, dma_rdlr and clr_restart_det registers that are
defined in the dw_i2c_regs struct in the common Designware I2C code
aren't defined in the PPRs of Picasso, Cezanne and Sabrina, but since
common DW I2C code doesn't access those, this is no problem.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I90732aa98518010686f73f80bee229b13e9bc89c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61592
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The speed control bits of the Designware I2C controller are bits 1 and 2
in the control register, so the values should be written as number
shifted by the number of the first bit. The resulting constant is
identical.
TEST=Timeless build for amd/chausie results in identical binary
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id0881dfcd7703ab6a70a9b1a355d5a93771aebc6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61591
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
I2C bus 0..2 on Sabrina uses a different pad type which supports 1.1V
and 1.8V levels, but doesn't support 3.3V I2C levels. Compared to the
existing I2C pad control registers the bit definitions are different, so
add a separate function to configure those pads which however still has
the same function signature and is compatible with same data structs
used for the devicetree settings. PPR #57243 Rev 1.50 was used as a
reference.
TEST=None
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie210c3437f2608d1e9fb99dcb151fc4190721375
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61570
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch removes `gpios_to_lock` lists and `soc_gpio_lock_config`
override function from Alder Lake SoC as the required config
(SOC_INTEL_COMMON_BLOCK_SMM_LOCK_GPIO_PADS) to perform GPIO PAD lock
configuration using SMM is not enabled.
Note: The current assumption is that the responsibility of locking the
sensitive GPIOs (from getting reprogrammed by OS or other SW) remains
with the mainboard.
BUG=b:208827718
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I2e22e8453b0ec7d34c0f7cb4c17e3336286581c8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch removes mainboard capability to override GPIO PAD lock
configuration using `mb_gpio_lock_config` override function as the
variant GPIO pad configuration table is now capable of locking GPIO
PADs.
BUG=b:208827718
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6769f51afaf79b007d4f199bccc532d6b1c4d435
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds routines to keep CSE and other HECI devices into the
lower power device state (AKA D0I3).
- cse_set_to_d0i3 => Set CSE device state to D0I3
- heci_set_to_d0i3 => Function sets D0I3 for all HECI devices
Additionally, creates a config `MAX_HECI_DEVICES` to pass the HECI
device count info from SoC layer to common CSE block.
As per PCH EDS, the HECI device count for various SoCs are:
ADL/CNL/EHL/ICL/JSL/TGL => 6 (CSE, IDE-R, KT, CSE2, CSE3 and CSE4)
APL => 1 (CSE)
SKL/Xeon_SP => 5 (CSE, IDE-R, KT, CSE2 and CSE3)
BUG=b:211954778
TEST=Able to build and boot Brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie32887196628fe6386896604e50338f4bc0bedfe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61518
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Redefine Hoglin to be used for Qualcomm's CRD 3.0 board, which uses
i2c for TPM instead of SPI. From now on, the Piglin board will be
used for all the Qualcomm reference boards that use SPI for TPM.
BUG=b:206581077
BRANCH=None
TEST=hacked an 8MB image and make sure boots on herobrine board
Change-Id: Ie1d71ec8b01f305c1c8fa815a0fb9b7ee022cc19
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Skyrim is a new Google mainboard with AMD Sabrina SOC.
BUG=b:214413553
TEST=util/abuild/abuild -t GOOGLE_SKYRIM --clean
Change-Id: I008fea4aa163b8aa66e86735b29b3fdc4e08a327
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61565
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie5d5f5441132e5b0d8991d07d4dde994fc17ab64
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61569
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
The I2C pad control registers of Picasso and Cezanne are identical and
the one of Sabrina is a superset of it, so factor out the functionality.
To avoid having devicetree settings that contain raw register bits, the
i2c_pad_control struct is introduced and used. The old Picasso code for
this had the RX level hard-coded for 3.3V I2C interfaces, so keep it
this way in this patch but add a TODO for future improvements.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I1d70329644b68be3c4a1602f748e09db20cf6de1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9d098a55a5c6f6e022c3896750c752e2759e101b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
No mainboard in the current tree implements mainboard_i2c_override. In a
follow-up commit the i2c_pad_control struct is introduced to be able to
make more parameters controllable by devicetree settings in the future.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f9ed5d50d26e4623dc5888cc8af090fdd00fc03
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61566
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iffb95257fa99f3276f851507a0c9e4583c47bacc
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61573
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
With the APCB edit tool enabled in commit 6a3ecc5 (guybrush: Inject
SPDs into APCB), DeWatt and Nipperkin can have independent
mem_parts_used tables. Copied common table from guybrush and
ran part_id_gen to make sure it's synced to latest.
BUG=b:209486191
BRANCH=guybrush
TEST=Boot on nipperkin
Change-Id: Id30b596c2466902dfcc59dcc88dcaa00748a3949
Signed-off-by: Rob Barnes <robbarnes@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61452
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This patch ensures PWRMBASE macro name and function to get PWRMBASE
address on APL SoC is aligned with other IA SoC.
PMC_BAR0 -> PCH_PWRM_BASE_ADDRESS
read_pmc_mmio_bar() -> pmc_mmio_regs()
Additionally, make `pmc_mmio_regs` a public function for other IA common
code may need to get access to this function.
BUG=None
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3a61117f34b60ed6eeb9bda3ad853f0ffe6390f7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61532
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Gimble does not use WWAN and TCP Port 1 according to the schematics.
Hence disabling it.
BUG=b:216533766
TEST=Boot to kernel and verify WWAN and TCSS Port 1 disabled
Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com>
change-Id: I0e7ae72620da39fc18ff253c440d006e83c576f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61266
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Add CPU & PCH PCIe configs and remove the unused devices.
Configures per Atlas schematics v6.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Id3145156c4ab3ec1c2d3eb6c433108a1b1cab9e8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Configure SATA, USB & HSIO settings per Atlas schematics v6.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: I88c898d4b0c3bfeefbca71e13dad55e2c5fc846f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ib49164cf51965228c65c6566b0711ae690b6cb50
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
In the nivviks and nereid pre-proto builds, the memory straps used
don't match those generated by spd_tools. Each pre-proto build only
supports a single memory part, and each of these parts should have ID 0
(see CB:61443). Therefore, for nivviks and nereid board ID 0, hard code
the memory IDs to 0 instead of reading them from the memory strap pins.
From P1 onwards, the memory straps will be assigned based on the IDs
generated by spd_tools.
BUG=b:197479026
TEST=Build test nivviks and nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ic0c6f3f22d7a94f9eed44e736308e5ac4157163d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Add a mem_parts_used.txt for each of nivviks and nereid, containing the
memory parts used in their pre-proto builds. Generate Makefile.inc and
dram_id.generated.txt using part_id_gen.
nivviks:
Micron MT62F1G32D4DR-031 WT:B
nereid:
Samsung K3LKBKB0BM-MGCP
BUG=b:197479026
TEST=Build nivviks and nereid. Use cbfstool to check that coreboot.rom
contains an spd.bin.
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: Ia3e5ee22199371980d3c1bf85e95e067d3c73e67
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61443
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I322a94569d8a63e8c0da68a8feb394ade4ce7999
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Fill in the memory config based on the the schematic and doc #573387.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I6958c7b74851879dbea41d181ef8f1282bf0101d
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: I7ec4b9368e0a63c0c0c9a92c8367a89d57f10d51
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61348
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Nissa doesn't have a SLP_S0_GATE signal, so we shouldn't generate the
related ACPI code. Therefore, move this behind a Kconfig which is
currently selected by the brya and brask baseboards.
BUG=b:197479026
TEST=Build brya0, check that there's no change to the generated dsdt.asl
Change-Id: I5a73c6794f6d3977cbff47aeff571154e41944cc
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Fill in the nissa baseboard GPIO table based on the nivviks P0 and
nereid P0 schematics. Also, add an override GPIO table for each of
nivviks and nereid.
The differences between nivviks and nereid are:
- WFC: nivviks has a MIPI WFC and nereid has a USB WFC, so the
MIPI-related pins are overriden to NC on nereid.
- The DMIC pins and speaker I2S pins were swapped after nivviks P0. The
baseboard reflects the new configuration, which will be used in
nivviks P1 onwards, nereid, and future variants. For now, nivviks
overrides the pins to the old configuration. Once nivviks P1 is
released, this will need to be updated to handle both.
BUG=b:197479026
TEST=abuild -a -x -c max -p none -t google/brya -b nivviks
abuild -a -x -c max -p none -t google/brya -b nereid
Change-Id: Ic923fd22abcaf7da0c607f66705a6e16c14cf8f2
Signed-off-by: Reka Norman <rekanorman@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60995
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Samsung K3LKBKB0BM-MGCP will be used by the nissa variant nereid. Add
it to the LP5 parts list and regenerate the SPDs using spd_gen.
BUG=b:197479026
TEST=None
Signed-off-by: Reka Norman <rekanorman@google.com>
Change-Id: I4db983d5015a4dacad0bd03cf7a85f6214856a76
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kangheui Won <khwon@chromium.org>
|
|
Currently, the function normalize_dirs() fails if the directories lib32
and lib64 don't exist. That can be fixed by using an rm -rf on it
instead of rmdir.
The cmake build doesn't create those directories, so was showing a
failure message after the build was already completed. That's fixed by
removing normailze_dirs() from the build_CMAKE() function.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Iea6e3ca57fb91ff1234be875861b27a78972d9ca
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
With latest hardware revision only PCIe RP2 and RP7 are used on this
mainboard.
Change-Id: I7702c2b9058dde1c819cb1df8a68fd602f5997da
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
With latest hardware revision SATA interface is no longer used on this
mainboard. The mainboard is still in development and not yet released
and for this reason there may still be adjustments.
Change-Id: Icbf088ce4c907e207f6f5d11b8bf5556fe2c90d6
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61414
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The functionality of disabling HECI1 device has been moved from the
FSP to coreboot (using `DISABLE_HECI1_AT_PRE_BOOT` config), hence,
always set the `Heci1Disabled` UPD to `0`.
BUG=none
TEST=Boot to OS, verify HECI1 is disabled on hatch system
using coreboot when mainboard selects DISABLE_HECI1_AT_PRE_BOOT config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia8908c080ca9991e7a71e795ccb8fc76d99514f8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I85750282ab274f52bc176a1ac151ef2f9e0dd15d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58697
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Let's re-enable PSP post codes when running PSP verstage. The original
reason we disabled POST codes was that it was causing problems during
eSPI init in bootblock. Since we now init eSPI in PSP verstage, it's
safe to re-enable them. We can now see post codes during S0i3 enter and
exit. This will help when debugging resume or suspend hangs.
Port 80 writes on suspend:
ef000020 ef00ed00 ef00ed01 ef000021 <--new
Port 80 writes on resume:
05 eea80025 eea90000 eea90100 eea90200 eea50000 eeae0000 eeae0004 eeaf0000 eeb00000 eec00000 eec00100 eec10000 eec40000 eec40500 eec40200 eefc0000 eefc0100 eec50000 ea00e0fc
ea00abc1 ea00e60b ea00e60c ea00abe1 ea00abe2 ea00abe4 ea00abe5 ea00abeb ea00abec ea00abed ea00abee ea00abef ea00e10f ea00e098 ea00e099 ea00abf0 ea00abf2 ea00e10e ea00e60c ea00e101
ea00e090 ea00e091 ea00e098 ea00e099 ea00e098 ea00e099 ea00e100 ea00e60c ea00e0b0 ea00e0b4 ea00e0b7 ea00e60c ea00e0c2 ea00e0c4 ea00e0d3 ea00e60c ea00e10d ea00e0c1 ea00e10c ea00e60c
ea00e0c4 e000 eec60000 eec20000 eec20800 b40000 eeb50000 eefc0000 eefc0300 ee070000 eed90000 eed90700 eeda0600 eedd0000 eecb0000 eecf0000 eecf0200 eee30000 eee30900 eee40000
ef000025
BUG=b:215425753
TEST=Boot/suspend/resume guybrush and verify post codes are printed
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Ie759f66be2b8ffac19145491a227752d4762a5b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61535
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This flag only controls eSPI init in the PSP Stage 2 Boot Loader. It
doesn't control if port 80s are written. This flag also doesn't
currently control LPC init. The PSP is currently hard coded to remove
any LPC init.
BUG=b:215425753
TEST=build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: Idf3f0dcc216df2fd15b016f9458a208b7e15c720
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61534
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Rob Barnes <robbarnes@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This will allow verstage to write post codes.
BUG=b:215425753
TEST=Boot guybrush and verify PSP post codes are printed
22-01-31 15:12:03.214 (S3->S0)
22-01-31 15:12:03.214 03 04 0f 0e f0 f1 f2 01 10 a0 a2 <--new
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I6ceee8fcb094f462de99c07aef8e96425d9c3270
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61522
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch aligns fsp_header with the Intel specification 2.0 and 2.3.
The main impetus for this change is to make the fsp_info_header fully
accessible in soc/vendor code. Here items such as image_revision can be
checked.
TEST=verify image revision output in the coreboot serial log.
compare to FSP version shown in serial debug output.
verify Google Guybrush machine boots into OS.
Signed-off-by: Julian Schroeder <julianmarcusschroeder@gmail.com>
Change-Id: Ibf50f16b5e9793d946a95970fcdabc4c07289646
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58869
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8d96e5f72a8b3552ab39c1d298bafcc224bf9e55
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61512
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce a new field in the board settings EEPROM region to control
whether VT-x is to be enabled.
Change-Id: If65c58dd6e5069dba1675ad875c7ac89e704350e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
|
|
This option isn't meant to be assigned statically through devicetrees,
but at runtime according to some config mechanism. It works in
conjunction with the existing Kconfig option.
Change-Id: Ia760be61466bc6a0ec187746e6e32537029512b4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
|
|
Allow deciding whether to enable VMX through a function parameter. Used
in a follow-up.
Change-Id: I4f932de53207cd4e24cb4c67d20c60f708bfaa89
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Marvin Drees <marvin.drees@9elements.com>
|
|
This patch enables SaGv since somehow it was accidently removed
by commit a52b9c3.
BUG=b:208719081
TEST=FW_NAME=vell emerge-brya coreboot
Fixes:a52b9c3 ("mb/google/brya: Move gpio_pm settings for brya
variants to baseboards")
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Change-Id: Ideae3dbd9746590db104d93afadbd8d574298b83
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61464
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This patch allows common CSE block to disable HECI1 device using PMC
IPC command `0xA9`.
Select SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PMC_IPC config for
Alder Lake to disable HECI1 device using PMC IPC.
Additionally, remove dead code that deals with HECI1 disabling using
in SMM as HECI1 disabling using PMC IPC is simpler solution.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I11a677173fd6fb38f7c09594a653aeea0df1332c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61458
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch allows common CSE block to disable HECI1 device using PMC
IPC command `0xA9`.
Select SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PMC_IPC config for
Tiger Lake to disable HECI1 device using PMC IPC.
Additionally, remove dead code that deals with HECI1 disabling using
in SMM as HECI1 disabling using PMC IPC is simpler solution.
BUG=none
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id5f1e3f622f65cd0f892c0dc541625bfd50d038e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Select HECI_DISABLE_USING_SMM config for Jasper Lake to disable HECI1
device using the SBI msg in SMM.
BUG=none
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I3e8568750ec941fc8b8e7407bad027f7175953c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61456
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Select HECI_DISABLE_USING_SMM config for Cannon Lake to disable HECI1
device using the SBI msg in SMM.
BUG=none
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6882b619506d1bf4131f68c2c9a32ef4f7d6f6d7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Set the SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR config for
Apollo Lake to disable HECI1 device using PCR writes.
BUG=none
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8df9544296f0bea095c5415805a596cb5b36885e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61444
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Set the SOC_INTEL_COMMON_BLOCK_HECI1_DISABLE_USING_PCR config for
Skylake to disable HECI1 device using PCR writes.
BUG=none
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib6bfa7c48660a6df8d0944de675a4f30fe248d1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Select HECI_DISABLE_USING_SMM config for Elkhart Lake to disable HECI1
device using the SBI msg in SMM.
BUG=none
TEST=None
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4ef7ff7aa234ce411092d70bcb2c9141609be90e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61453
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch provides the possible options for SoC users to choose the
applicable interface to make HECI1 function disable at pre-boot.
`SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_SBI` config is used for
disabling heci1 using non-posted sideband write (inside SMM) after
FSP-S sets the postboot_sai attribute. Applicable from CNL PCH onwards.
`SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_PMC_IPC` config is used for
disabling heci1 using PMC IPC command `0xA9`. Applicable from TGL PCH
onwards.
`SOC_INTEL_COMMON_BLOCK_HECI_DISABLE_USING_PCR` config is used for
disabling heci1 using private configuration register (PCR) write.
Applicable for SoC platform prior to CNL PCH.
Additionally, add PID_CSME0 macro for SKL, Xeon_SP and APL to fix the
compilation failure.
Finally, rename heci_disable() function to heci1_disable() to make it
more meaningful.
BUG=none
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7e0bab0004013b999ec1e054310763427d7b9348
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61431
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch export cse_disable_mei_devices() function instead of marking
it static. Other IA common code may need to get access to this function
for making `heci1` device disable.
BUG=none
TEST=Able to build and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib2a1eb2fdc9d4724bd287b82be4238893c967046
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61430
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This patch removes `lockable_brya_gpios` lists and
`mb_gpio_lock_config` override function from brya baseboard directory as
the variant GPIO pad configuration table is now capable of locking GPIO
PADs.
BUG=b:208827718
TEST=Able to built and boot brya.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ifc7354f2ae3817459b5494d572c603eba48ec66a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61503
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the FPMCU SPI and IRQ GPIOs
for all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests `FPMCU_*`
(F11-F13 and F15-F16) are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I1d0b8a5aed6ea54bcfaa267cae5ca78595396ce5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the PCH write protect GPIO for
all brya and brask variants.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia125c513c09ecbb1047100e72f8540369646988e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM IRQ pins for all brya
and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
GSC_PCH_INT_ODL is locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icfc251152278c59f9a94b84fcd8c6d36c26bff62
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
|
|
This applies a configuration lock to the TPM I2C and IRQ GPIO for
all brya and brask variants.
BUG=b:208827718
TEST=cat /sys/kernel/debug/pinctrl/INTC1055\:00/pins suggests
I2C_TPM_SDL and I2C_TPM__SDA GPIO PINs are locked.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4f2a7014faeecd4701ea35ec77ef0e1692516b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add platform_report_mode function which report current developer mode
status to the PSP. L1 widevine app in the PSP will use this information
to select key box.
BUG=b:211058864
TEST=build and boot guybrush
TEST=build picasso chrome os boards
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I04b5fcfa338b485b36f1b946203f32823385c0b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61369
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add svc_set_platform_bootmode svc to cezanne. PSP will use this
information to select proper widevine keybox.
BUG=b:211058864
TEST=build guybrush
Signed-off-by: Kangheui Won <khwon@chromium.org>
Change-Id: I6bcc9e49a2b73d486cfecd7b240bf989cad94630
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61368
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Followup will allow use of PARALLEL_MP with SMM_ASEG so
some guards need to be adjusted.
Change-Id: If032ce2be4749559db0d46ab5ae422afa7666785
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It was only evaluated on LEGACY_SMP_INIT path while model_106cx
has used PARALLEL_MP for a long time.
Change-Id: I90ce838f1041d55a7c77ca80e563e413ef3ff88d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61479
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This adds the following commits:
* 9e8f457 picasso: Update Dali SMU firmware
* 428da69 Revert "cezanne: Correct the whitelist bootloader name"
* ebed66e cezanne: Correct the whitelist bootloader name
Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Change-Id: I73a240e8443ee4bf264e55857dfc78c11a08113f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61516
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I6c093e8326733a079ab3c41dfd2c77fe1883a9d4
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61491
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8539eb9028f3141dfbeb926a1e19e3ad94be3edf
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61490
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ifaaf8a240436758a83216037994493255935f158
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61489
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I8b5537bb6d0cb934aadb0eba8ba4f51dd53026c2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I0ca7cbbf6c4884b58b4ec8a8e3cbc77f118a42f2
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61487
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ib964939468ebb8cd0a537d514060ee5b8b13e320
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I458ff53bb9ae3a6c1003ee857b61fb350152cc86
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61485
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ie5c83f16146517d0aa37cd1975de725f57323094
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61484
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ifb5f848912fca4e86b6eab16a74733571a4ba26d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61483
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I2313dc209eb9035f1026a1f37ef8146c57c60986
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61482
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: I59203253ba9e66e4db3ff5dcae347b68d1203f21
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Outside of the designware I2C driver the generic platform_i2c_transfer
function should be used instead, so don't make dw_i2c_transfer available
outside of this file.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib8b6a08b6aa2cd63adc2ef69b828661fa0ed154a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic1812c4d8d2b4d9ad331a787bd302a4f0707c1fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I55e6d93ca141b687871ceaa763bbbbe966c4b4a3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
|
|
Using enum cb_err as return type instead of int improves the readability
of the code. This commit only changes the return value of the static
functions in this file keeping the external interface identical.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I80300e0b24591fc660c3134139b9257e002cdbbb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
size_t is defined in stddef.h and not stdint.h, so include types.h to
get both.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3782d3a949b72d1530ebd8078c46bc695f76dc4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
