Age | Commit message (Collapse) | Author |
|
The x86 timers are a bit of a mess. Cases where different stages use
different counters and timestamps use different counters from udelays.
The original intention was to only flip TSC_CONSTANT_RATE Kconfig
to NOT_CONSTANT_TSC_RATE. The name would be incorrect though, those
counters do run with a constant rate but we just lack tsc_freq_mhz()
implementation for three platforms.
Note that for boards with UNKNOWN_TSC_RATE=y, each stage will have a
slow run of calibrate_tsc_with_pit(). This is easy enough to fix with
followup implementation of tsc_freq_mhz() for the platforms.
Implementations with LAPIC_MONOTONIC_TIMER typically will not have
tsc_freq_mhz() implemented and default to UNKNOWN_TSC_RATE. However,
as they don't use TSC for udelay() the slow calibrate_tsc_with_pit()
is avoided.
Because x86/tsc_delay.tsc was using two different guards and nb/via/vx900
claimed UDELAY_TSC, but pulled UDELAY_IO implementation, we also switch
that romstage to use UDELAY_TSC.
Change-Id: I1690cb80295d6b006b75ed69edea28899b674b68
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I943723da7167a47f514eda19fb9b71b8f56c2d32
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35997
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested on Thinkpad X200: the romstage execution speeds are back to
pre-C_ENVIRONMENT_BOOTBLOCK levels.
Change-Id: Id0b50d2f56e7cc0e055cdc8b9aa28794327eca28
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35994
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some platforms lack a non-eviction mode and therefore caching the
whole ROM to speed up XIP stages can be dangerous as it could result
in eviction if too much of the ROM is being accessed. The solution is
to only cache a region, about the size of the stage that the bootblock
is about to load: verstage and/or romstage.
TODO: now a limit of 256KiB is set for the total amount of cache that
can be used. This should fit most use cases for the time being.
Change-Id: I94d5771a57ffd74d53db3e35fe169d77d7fbb8cd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35993
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to
enable or skip GOP.
Change-Id: I5731003c8a094c4d108efbea14d31d335758bbb7
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36350
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It is a user-visible option and enabled by default for ARCH_X86,
some consider it as debugging aid only. Therefore platform design
should not depend on it.
It must remain selected with CHROMEOS and boards are allowed
to explicitly select it as well.
For siemens/mc_bdx1,mc_aplX boot time will be increased due
the use of get_us_since_boot() with COLLECT_TIMESTAMPS=n.
When unable to determine if N seconds has elapsed from boot,
this turns into a delay of N seconds.
Change-Id: I6ee4195d266440143344781d39db9578cd8bdcb3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36527
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
EBDA is not PCH related, thus move the Kconfig to the appropriate socs.
Change-Id: I216871ad1a8dd5bc294062a4e9b54eb51f71b781
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Use the new common function to set LT_LOCK_MEMORY at end of POST to
protect SMM in accordance to Intel BWG.
Tested successfully on X11SSH-M by disabling SGX and running chipsec.
Change-Id: I623e20a34667e4df313aeab49bb57907ec75f8a8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Remove the now orphaned memory locking API that was replaced by a
Kconfig-based approach.
Change-Id: Iebc45f514c576d77f90f558151d25c21f0554779
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36515
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use the new common function to set LT_LOCK_MEMORY prior to SGX
activation based on Kconfig.
Change-Id: Iefec0e61c7482a70af60dabc0bec3bf712d8b48a
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Select the new SGX Kconfig option for LT_LOCK_MEMORY.
Change-Id: I8b422ae50d11815ead10bfd5a8b47a13daa82821
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36514
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add new Kconfig option for setting LT_LOCK_MEMORY.
Change-Id: I1b232e34a1288ce36a3dce2ab0293c26f10f3881
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36513
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We only need this defined with udelay() implementation
on top of LAPIC_MONOTONIC_TIMER.
Change-Id: I490245fa0d57de3a6e8609e735f668626cf1201e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36526
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia8d8dc23ee0b51d62c83f5ba640b3a9aea4e744b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
|
|
It is expected that cbmem is initialized in romstage. The qemu-riscv
target did not perform that correctly. Fix this omission.
Change-Id: I00f8e3b315e57a5c042889f48450f79d263f24b1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36446
Reviewed-by: Philipp Hug <philipp@hug.cx>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The public key was not verified during the verified boot operation.
This is now added. The items in the manifest are now fixed at 12 as
we always have the postcar stage.
BUG=N/A
TEST=tested on facebook fbg1701
Change-Id: I85fd391294db0ea796001720c2509f797be5aedf
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36504
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id8dcba8e83b0f896c26ab684d857908c6f272453
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This has nothing to do with console options.
This also improves the help text to reflect what it actually does.
Change-Id: I039f4f6bbe144769d6a362192b225838ed3d9d43
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Also, the loglevel is never set to value of > 8.
Change-Id: Ief29e07be6ac075956bf0f9aee85b14eb89af44c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Evgeny Zinoviev <me@ch1p.io>
|
|
The Kconfig contained some items that were only intended to
set a default and that now were displayed in two locations
in the menuconfig.
BUG=N/A
TEST=build
Change-Id: If5d9c993c03a0e901fd6c2a2107a6be6b94d063b
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36481
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add second source touch pad with i2c address 0x15.
BUG=b:142629138
BRANCH=N/A
TEST=check new touch pad can work properly
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: Icc58dbcf307f11c368a1a5408f32111ed5841d39
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com>
Reviewed-by: Mathew King <mathewk@chromium.org>
|
|
This patch enables lockdown configuration for saddlebrook platform
BUG=None
TEST=Boot to Linux on saddlebrook and verified MRC is restored on warm, cold,
resume boot path's.
Change-Id: Ia324c118b0c8e72b66a757dee5be43ba79abbeab
Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36451
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
use coreboot MP init for saddlebrook by default.
BUG=None
TEST=Boot till yocto linux 2.7 on saddlebrook and verified the AP's
proper initialization using 'cat /proc/cpuinfo' command.
Change-Id: I2db2fe92c8ba0e649dccf95ce804a97ae4a05603
Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36450
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The document isn't included in any toc-tree due to a typo.
Change-Id: Ic1491dde2d48b5d004fc28c743bbee6de12f433c
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36540
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These changes are in accordance with the documentation:
[1] page 106, 7th Generation Intel(R) Processor Families for U/Y
Platforms and 8th Generation Intel(R) Processor Family for U Quad
Core and Y Dual Core Platforms. Datasheet, Volume 1. January 2019.
Document Number: 334661-006
Change-Id: I5232a7a670b97d51ff3b3b71a08f25f961ac1d6f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36058
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates a common instance of ipu.asl inside intel common
code (soc/intel/common/block/acpi/acpi) and ask cnl & icl soc code to
refer ipu.asl from common code block.
TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify
Device(IMGU) presence after booting to OS.
Change-Id: I4d18571008c199fd5c3dbeed8cba9374520359b4
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36459
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch creates a common instance of globalnvs.asl/nvs.h inside intel common
code (soc/intel/common/block/) and ask cnl & icl soc code to refer globalnvs.asl
and nvs.h from common code block.
TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify
GNVS operation region presence after booting to OS.
Change-Id: Ia9fb12a75557bd7dc38f6d22ba2b32065d18b3ee
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36457
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch creates a common instance of sleepstates.asl inside intel common
code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to
refer sleepstates.asl from common code block.
TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify
S0/S3/S4/S5 entries after booting to OS.
Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch creates a common instance of lpc.asl inside intel common
code (soc/intel/common/block/acpi/acpi) and asks specific soc code to
refer lpc.asl from common code block.
Note: From ICL onwards Intel Bus Device 0:1f.0 is known as eSPI
rather than LPC.
TEST=Able to build and boot ICL DE system. Dump DSDT.asl to verify
Device(LPCB) device presence after booting to OS.
Change-Id: I266d6e667e7ae794377e4882791e3be933d35e87
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36455
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use already declared typedef and modify the usage accordingly.
Change-Id: Icc8413050bfae896d78605416aaaaa6a52eb39f1
Signed-off-by: Himanshu Sahdev <himanshusah@hcl.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36429
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Start using the vb2 public key format and process the signature
verification using the vb2 routines. This allows us to use the
futility to prepare the keys and eliminates the need for custom
tools.
BUG=N/A
TEST=tested on fbg1701 board
Change-Id: Id5d28595bbfb1f5ca5bca0fcfb06134bb1143f25
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
FATAL_ASSERT is used for debugging purpos. Don't select it by default.
Change-Id: If4d521827f3d50fb662b89b24d00fb0517e7af2d
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36508
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This adds a common cbmem_top implementation to all coreboot target.
In romstage a static variable will be used to cache the result of
cbmem_top_romstage.
In ramstage if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is set a global variable
needs to be populated by the stage entry with the value passed via the
calling arguments. if CONFIG_RAMSTAGE_CBMEM_TOP_ARG is not set the
same implementation as will be used as in romstage.
Change-Id: Ie767542ee25483acc9a56785ce20a885e9a63098
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
The Intel wifi drivers were disabled by default. This should not
be done here as the baseboard defines if this present or not.
BUG=N/A
TEST=build
Change-Id: I364a821f8387d580b1fbfb7cf77b32a3a6dceebb
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36503
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for board revision 1.3 containing Kingston memory.
BUG=N/A
TEST=tested on portwell m107 module
Change-Id: I436698ee079952580c764e840ee0ad2e18ea8d3b
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
The facebook fbg1701 never contains Intel wifi functionality
so this can be disabled.
BUG=N/A
TEST=tested on facebook fbg1701
Change-Id: Iab7dd760020cb7a9f7fea24812afb19bf5e62183
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Implement a simple function that parses a canonical UUID string into the
common byte representation. Inspired by acpigen_write_uuid().
Change-Id: Ia1bd883c740873699814fde6c6ddc1937a40093e
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36297
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Ia15824effc8f846ff1143abe698c5a0546df7868
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36489
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I4330fd9b2ec6ca36beae3213642f7a4ae61f7dbe
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36488
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I0c33a1f3f9c33c15a901fe90258ed989e9641701
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36124
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I21b149500849eceea663d18a0880c6443ae47d9b
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35498
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I06cdb8eaaf7f74b47e1d1283dcaa765674ceaa45
Signed-off-by: T Michael Turney <mturney@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36070
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support for gpio driver for SC7180
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/30003/25
https://review.coreboot.org/c/coreboot/+/31083/15
Change-Id: I12bdbeb97765b6ae1e015ca35108008bf82801cc
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch removes unused TRAP, Port 80 debug options carried
from previous platform (BDW).
Change-Id: I91ccb24a7f08f9a19f6e3a7609c8f43776700a4e
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36466
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1e3dc1bd36c5de4e58eef6a3ba8ccbde28fba64b
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36465
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Able to build and boot Hatch and DE.
Change-Id: I6d63c005873fc5d67b4a44f42bb436628d7c1dc3
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36462
Reviewed-by: Michael Niewöhner
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a Kconfig option for indicating agreement to use the contents of
amd_blobs. Users should only download the repo after implicitely
agreeing to AMD's License text. No formal documented agreement
is required.
Update Makfile.inc, similar to other submodules, to initialize and
checkout the submodule once the Kconfig option is selected.
Change-Id: I4ae807659db16756453dc3db2c51848291c681b8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This is currently an empty repo. The intention for amd_blobs may be
found in Documentation/soc/amd/amdblobs_license.md. A subsequent
patch will make the repo's init and checkout optional based on a
Kconfig symbol.
Change-Id: Ia93fb2711beaea4cb1c8e5d71dc3a9e0facc5485
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36441
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Turn off HDMI power when enter s0ix and S5.
BUG=b:143057255
BRANCH=N/A
TEST=Measure the power on GPP_E16 under s0ix and S5
Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: I580e6094d48663d5c208fd82c7744485d899bcc1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36224
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Quite a few new functions added here in order to support the use-case
of performing EC software sync within coreboot.
Most of these functions are related to retrieving the EC's hash, and
writing a new image into the EC's flash.
BUG=b:112198832
BRANCH=none
TEST=With whole patch series, successfully performed EC software sync
Change-Id: I0d3c5184dbe96f04b92878f2c19c7875503a910a
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36207
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add a common function for setting LT_LOCK_MEMORY via MSR 0x2E7, which
locks most of the chipset BAR registers in accordance to Intel BWG.
Change-Id: I4ca719a9c81dca40181816d75f4dcadab257c0b3
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36339
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Haswell and model_2065 implement a static set_msr_bit helper which
should be publicly available instead. Move it to cpu/x86.
Change-Id: I68b314c917f15fc6e5351de1c539d5a3ae646df8
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36338
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I10766ffda67bdc830ab01436ebd0578c79f1ec70
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to
enable or skip GOP.
Change-Id: I5993e64631f86ff0f9ae069e10b89df8bc4cd085
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Currently full calibration with DVFS (which implies tripling memory
training time for multiple frequencies) will be run in recovery mode,
which takes up to 30 seconds with serial console enabled.
However, in recovery mode the system should be running only the recovery
programs with minimal services. DVFS should be not needed.
In order to improve stability and system boot time, we want to disable
DVFS training in recovery mode.
BRANCH=kukui
BUG=b:142358843
TEST=emerge-kukui coreboot
Change-Id: I4f1b1b020eba9bfce21655169bcb31b98d54b010
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36456
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Change-Id: I3f9672053dcf0a4462ef6ab718af4f18fcfa7e14
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
|
|
unconditionally
Icelake platform doesn't support booting from any other media
(like eMMC on APL/GLK platform) than only booting from SPI device
and on IA platform SPI is memory mapped hence enabling temporarily
cacheing on memory-mapped spi boot media.
Also removed inclusion of unused header in cpu.c file
TEST=Able to build and boot ICL DE board.
Change-Id: I46d9ec054c4804ca756f2101085a55e91b5cc6f0
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36431
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reduce duplicated comments explaining that submodules' settings in
.gitmodules are update=none, and that --checkout is required. This
prepares for another submodule, and makes adding a third set of
comments unnecessary.
Change-Id: I7721333a61122284ed9975ecd2adc3271a879728
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36440
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
AMD has generated a simpler and more flexible license agreement for
using proprietary precompiled binary images. The new agreement is
intended to cover all blobs in the directory structure below where
the license resides and eliminates any unique agreements previously
provided for individual products.
Add a description of the repo, as well as the license agreement it
contains.
Change-Id: Ia3dbc1a5259a2512281ea87b7e55fb3134b3b3c5
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36415
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I6a7cd96699dbeb42a53bf1d25db1bcf93e416e0f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33200
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This links the reset function, the common pmbase functions and the spi
driver in all stages.
The RTC code is not included in SMM as it is unused there.
Change-Id: I65926046d941df3121c7483d69c0b4f7003d783e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33199
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This matches the coreboot makefile behavior.
Change-Id: Iaada965de904cb03edd068fed8827643496292cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36439
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify DPTF parameters.
Modify TDP PL1 values to 15.
Remove TCHG Level 3 - 0.5A.
BUG=b:131272830
BRANCH=none
TEST=emerge-hatch coreboot chromeos-bootimage
Signed-off-by: YenLu Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I0e5c079856a167b1c2ef52e446d055404e565858
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35794
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Iee2056a50a1201626fa29194afdbfc1f11094420
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36333
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are a lot of different implementations to pass information from
romstage to ramstage. These could all be unified by passing this
information via cbmem. Often however these methods exist for that very
purpose. This solves this by passing cbmem_top via the programs
arguments.
Change-Id: Id2031f7bb81ce65fc318313c270eb1fbae3b2114
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36272
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Payloads can use coreboot tables passed on via arguments instead of
via a pointer in lower memory.
Stages can make use of the argument to pass on information.
Change-Id: Ie0f44e9e1992221e02c49d0492cdd2a3d9013560
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36143
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to
enable or skip GOP.
Change-Id: I3546371dd18120e3fbd1179a79b2bdc0a7436726
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36352
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Set the FSP parameter PeiGraphicsPeimInit according to RUN_FSP_GOP to
enable or skip GOP.
Change-Id: I7f7b2c688e46534046dc0976458c4c96614100b0
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This moves common memmap functionality from skl,icl,cnl,apl to the common tree.
Change-Id: I45ddfabeac806ad5ff62da97ec1409c6bb9e89ac
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36410
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibbd418656c32f56be2b00481068e8499421b147c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I955dd2dc22cb3cfc4fdf1198cfd32f56475f97c9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33198
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Each variant needed to define variant_early_gpio_table(), even if
it didn't need to make any changes. Added a __weak version of the
function into baseboard/gpio.c.
Certain upcoming Hatch variants will not use SPD files. Allow
SPD_SOURCES in spd/Makefile.inc to be empty.
BUG=None
BRANCH=None
TEST=Build coreboot and see that it builds without error
Change-Id: Ie946cfd7c071824168faa38fd53bd338a5a451e1
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36068
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
* Add defines for GPIO_MEM_CONFIG_0:3 in the template file, so
that code that relies on these defines can compile. Because they
are preprocessor symbols, there is no way to define them as
__weak in the baseboard header and allow the variant to override
as needed, so they need to be defined here and changed if needed.
* Add a version number for the script and an "auto-generated by"
line in the git commit message.
* Change the branch name so that it's not the same as the ones
that the other scripts will create, so that repo upload on those
CLs won't affect this one.
BUG=b:140261109
BRANCH=None
TEST=Create and build the "sushi" variant:
$ util/mainboard/google/hatch/create_coreboot_variant.sh sushi
$ util/abuild/abuild -p none -t google/hatch -x -a
Prior to this CL, you would get an error message that SPD_SOURCES is
not set. If you fixed that, then you would get failures for
GPIO_MEM_CONFIG_0, _1, _2, and _3 not defined, and/or gpio_table[]
and early_gpio_table[] not defined. After the CL, the build proceeds.
Change-Id: I0f48d6bb9544cad6d419d3a6fbb17f57200938b2
Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36408
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Here are example locations of these licenses:
Apache-2.0 - src/soc/sifive
BSD-3-Clause - Throughout coreboot & libpayload source
CC-BY-4.0 - Documentation
CC-BY-SA-3.0 - Documentation/community/code_of_conduct.md
GPL-2.0-only - Throughout coreboot source
GPL-2.0-or-later - Throughout coreboot source
GPL-3.0-only - util/amdtools
GPL-3.0-or-later - src/lib/[gcov/libgcov/gnat]
ISC - src/lib/ubsan.c, soc/qualcomm/ipq806x/include/soc/gsbi.h, others
MIT - soc/nvidia/tegra210/mipi_dsi.c, files in mainboard/cavium/
X11 - include/device/drm_dp_helper.h, drivers/aspeed/common/ast_tables.h
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: Icf20c0227d4fe8efb0d337a76935797a1bc33f0f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The code is based on autoport.
This port is tested on a T440p without a dGPU and can boot Arch Linux
from SATA disk with SeaBIOS payload. The tested components and issues
are in the documentation.
Change-Id: I56a6b94197789a83731d8b349b8ba6814bf57ca2
Signed-off-by: Iru Cai <mytbk920423@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34359
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If there is no alloca() macro defined, then define it as
__builtin_alloca(), as most compilers support that as an intrinsic
instead, if no alloca.h is included.
Change-Id: I8730d57ce7c2f323b52e7a5720c598fb7af16b44
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36387
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As preparation for x86_64 clean the assembly code and introduce
arch/ram_segs.h similar to existing arch/rom_segs.h.
Replace open coded segment values with the defines from the new
header.
Change-Id: Ib006cd4df59951335506b8153e9347450ec3403e
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36321
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I89e2bccf3fb99b20dde38745fc124d5dc95feb78
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I386572c772ea9de571bbb9d51ef9090e9c429b99
Signed-off-by: Joe Moore <awokd@danwin1210.me>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36405
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change all uN integral types to uintN_t. Make the names of host
command params/responses consistent. Use static struct initialization
to ensure all fields are initialized.
BUG=none
BRANCH=none
TEST=compiles
Change-Id: Ibe1e29e88975c85eea215adedc5f5e483243e0d6
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36340
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: If9c743335ab09038c9e22d1f4d3b7411585b2c8c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36384
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Panel settings taken from KBL FSP sample vbt.bin
Test: build/boot librem13v2/15v3 with libgfxinit init,
verify both LFB and text modes functional
Change-Id: I9582065603417e53704244e95dde51a59f709664
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This includes a huge set of refactorings to support Core Display Clock
(CDClk) frequency switching based on the current mode requirements.
The CDClk is configurable since Haswell and runtime switching is suppor-
ted since Broadwell. Always using the lowest possible frequency setting
should allow some power-savings. While, on the upper end, we can support
higher resolution panels now, without having to change the static confi-
guration.
There have also been some smaller changes and fixes, including:
o Parsing of eDP 1.4+ DPCD link rates, enables panels that don't
advertise a maximum link rate but only individual ones.
o DP support for Ibex Peak.
o Corrected limit for HDMI on G45 to 165MHz.
o Reworked GMBUS reset handling and timeouts, should help with
stalled GMBUS controllers when unimplemented ports were probed
by accident.
Tested on various boards from GM45 to KBL-R.
Change-Id: I0a90bd4afe2091699a46a5a1323af9723ff43018
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35898
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As stated in CB:36334 cbmem_top() should not be called before memory is
initialized. Therefore drop the check to see if MRC finished.
Change-Id: I964a20a5e9aa69fdb75413c36a17d34b7ba00098
Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36386
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Determine maximum speed by looking at either turbo flex limit or
uncore ratio limit.
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Change-Id: I0f3a64a40cb1d28d8eb9380c2071ec748e345b88
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
If CPUID leaf 0x16 is available (Skylake and later) use it to obtain
current and maximum speed. Otherwise call weak function that can be
provided elsewhere (cpu/soc/mainboard). Also, populate "core enabled"
with the same value as "core count".
TEST=tested on OCP Monolake with dmidecode -t processor
Change-Id: Ie5d88dacae6623dfa0ceb3ca1bb5eeff2adda103
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36283
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This cpuid function (0) is same across Intel and AMD so having it in
arch/x86 seems like a good idea.
Change-Id: I38f1c40bceac38ed6428f74b08bf60b971644f5a
Signed-off-by: Andrey Petrov <anpetrov@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36282
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
To get a better idea what this code does, this patch adds
a new method called 'print_system_info'.
Change-Id: I16f1c9cdc402b1a816fac65d1490432e39c07baf
Signed-off-by: Felix Singer <felix.singer@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36315
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The i82801ix_early_init is now called both in the bootblock and
romstage. The rationale behind setting this up twice is to ensure
bootblock-romstage compatibility in the future if for instance VBOOT
is used.
This moves the console init to the bootblock.
The romstage now runs uncached. Adding a prog_run hooks to set up an
MTRR to cache the romstage will be done in a followup patch.
The default size of 64KiB is not modified for the bootblock as trying
to fit both EHCI and SPI flash debugging needs a more space and 64KiB
is the next power of 2 size that fits it.
TESTED on Thinkpad X200.
Change-Id: I8f59736cb54377973215f35e35d2cbcd1d82c374
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35992
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
With CONFIG_C_ENVIRONMENT_BOOTBLOCK it makes more sense to rely on the
size of the bootblock over CONFIG_XIP_ROM_SIZE. To make this work,
only powers of 2 are allowed as bootblock size.
Change-Id: Ic8104ca9c51e4d2eccdb277e4c2111d2da662f3e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35990
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
To make data flow more explicit, global variables 'MR01Value' and
'MR13Value' are replaced with local variables, which are passed as
function arguments.
BRANCH=kukui
BUG=none
TEST=1. emerge-kukui coreboot
2. Fast calibration succeeded
Change-Id: Id21483092c86c3ae7dbb1173a2b943defe41a379
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36286
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
Also:
add some missing includes spotted by Jenkins.
Including <types.h>, is supposed to provide stdint and stddef.
Change-Id: I7bd999b59d1c0bdfa5999bf5805576f94c9a2390
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33680
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Also, including <types.h>, is supposed to provide stdint and stddef.
Change-Id: I7e1a3483aae0e3f0a7bc2eb2c1862ae7a325fd9c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33683
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Change-Id: Ibcb1cafe36c255b4c5bd0a4faeedb95e91048709
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
If a device node should be enabled on some variants, but disabled on
others, it had better be declared as disabled (rather than absent) in
base device tree (rather than override tree for the variant disabling
it), and enabled in override tree for the variant needing it, so that
it does not need to be declared once more when adding another variant
with such node disabled.
Change-Id: I4b28360905ae38149ace9ac5d21cd6d5045b7584
Signed-off-by: Bill XIE <persmule@hardenedlinux.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36347
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This should improve boot times as it skips unnecessary read and
writes.
Change-Id: I8cf36613903783e741b2e3bfeeee5bc29ab26d5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Add Cirque Touchpad devicetree configuration to export relevant ACPI
objects to the kernel.
BUG=b:141259109
BRANCH=sarien
TEST=Boot to ChromeOS. Ensure that relevant ACPI objects are exported in
the SSDT.
Change-Id: I91dcb27b86c6a2bed5579f1f6c1102871d55b315
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Justin TerAvest <teravest@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
There is no posibility to prevent loading images from cbfs at this stage
For security features prog_locate_hook() is added. This hook can be used
to prevent loading the image.
BUG=N/A
TEST=Created verified binary and verify logging on Facebook FBG-1701
Change-Id: I12207fc8f2e9ca45d048cf8c8d9c057f53e5c2c7
Signed-off-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/30811
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Using docker to build to documentation eases the process of building
the documentation. Given that some versions of sphinx are
incompatible, the option to use docker is presented first.
Change-Id: I6c18f81a829364ada1859c04ba2dc4f886934bcc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36105
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change removes an inversion of GPP_D17 that caused the
device to get stuck in a reboot loop because the kernel was crashing
within the first couple seconds of kernel boot.
BUG=b:142515200
BRANCH=none
TEST=Flash and boot nocturne, verify boot is stable and that device
doesn't reboot after jumping into kernel, and that it passes the
'tast -verbose run <ip> hardware.SensorRing' test.
Change-Id: Ia1408ef6ea92f6b31a9f3eee8720954af3a7c382
Signed-off-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35967
Reviewed-by: Yicheng Li <yichengli@chromium.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|