summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-01-25mb/google/brya/var/taniks: Run time probe for NVMe SSD and MMCJoey Peng
Taniks will use two PCIE port signals with one slot, one CLK and one CLKREQ at next build. In order to accommodate this, probe statements are added to the devicetree. This only affects NVME SSD and EMMC. BUG=b:215040000 TEST=Build FSP with debug output enabled, and observe the correct root ports being initialized depending on the FW_CONFIG values for BOOT_EMMC and BOOT_NVME. Cq-Depend:chromium:3397561 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I2ead505088f19fd3bf9768b541838395c82ef051 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61170 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-25mb/siemens/mc_ehl: Prevent reset when TCO expiresWerner Zeh
In order to guarantee data integrity an expired TCO must not hard reset the board. Select the Kconfig switch to prevent this reset. Change-Id: I04080c6bcd486e3a406438cc7a703165bb6945a0 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61178 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-25soc/intel/ehl: Add Kconfig option to disable reset on TCO expirationWerner Zeh
The TCO timer is the default watchdog of an x86 host and can reset the system once it has expired for the second time. There are applications where this reset is not acceptable while the TCO is used. In these applications the TCO expire event generates an interrupt and software takes care. There is a bit in the TCO1_CNT register on Elkhart Lake to prevent this reset on expiration (called NO_REBOOT, see doc #636722 ). This bit can either be strapped on hardware or set in this register to avoid the reset on expiration. While the hardware strap cannot be overridden in software, the pure software solution is more flexible. Unfortunately, the location for this bit differs among the different platforms. This is why it has to be handled on soc level rather than on TCO common code level. This commit adds a Kconfig option where NO_REBOOT can be enabled. This makes it easy to reach this feature over to the mainboard where it can be selected if needed. Change-Id: Iaa81bfbe688edd717aa02db86f0a93fecdfcd16b Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61177 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-25northbridge/intel/i945: Change types to uintptr_t where appropriateElyes HAOUAS
Prepares compilation for x86_64 by avoiding casts to different sizes. Current patch fixes: 1. src/northbridge/intel/i945/raminit.c: In function 'ram_read32': src/northbridge/intel/i945/raminit.c:77:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 77 | read32((void *)offset); | ^ 2. src/northbridge/intel/i945/rcven.c: In function 'sample_strobes': src/northbridge/intel/i945/rcven.c:29:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 29 | read32((void *)addr); | ^ src/northbridge/intel/i945/rcven.c:30:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 30 | read32((void *)(addr + 0x80)); | ^ 3. src/northbridge/intel/i945/gma.c: In function 'intel_gma_init_lvds': src/northbridge/intel/i945/gma.c:98:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 98 | (void *)pgfx, mmiobase, piobase, pphysbase); | ^ src/northbridge/intel/i945/gma.c:359:25: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 359 | (void *)pgfx, hactive * vactive * 4); | ^ src/northbridge/intel/i945/gma.c:360:24: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] 360 | memset((void *)pgfx, 0x00, hactive * vactive * 4); | ^ src/northbridge/intel/i945/gma.c: In function 'intel_gma_init_vga': src/northbridge/intel/i945/gma.c:384:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 384 | (u32)mmiobase, piobase, pphysbase); | 4. src/northbridge/intel/i945/northbridge.c: In function 'mch_domain_read_resources': src/northbridge/intel/i945/northbridge.c:64:23: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] 64 | cbmem_topk = ((uint32_t)cbmem_top() / KiB); | ^ Change-Id: I5ac7a1cb5d85a346114f909047d5a7c21ddb43e9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61117 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-25lib/cbmem_console,console: Resurrect CONSOLE_CBMEM_DUMP_TO_UARTRaul E Rangel
Chromebooks normally run with non-serial enabled firmware because writing to the UART console is very slow. This unfortunately makes debugging boot errors more difficult. We tend to rely on port 80s and/or the vboot recovery code. When CONSOLE_CBMEM_DUMP_TO_UART is selected it will dump the entire cbmem console to the UART whenever `vboot_reboot()` is called. We don't incur any boot time penalty in the happy path, but still retain the ability to access the logs when an error occurs. The previous implementation was using a hard coded UART index and `get_uart_baudrate` was always returning 0 since `CONFIG_TTYS0_BAUD` wasn't defined. This change makes it so the UART console properties are available when CONSOLE_CBMEM_DUMP_TO_UART is set. This results in the following .config diff: +CONFIG_UART_FOR_CONSOLE=0 +CONFIG_TTYS0_BASE=0x3f8 +CONFIG_TTYS0_LCS=3 +CONFIG_CONSOLE_SERIAL_115200=y +CONFIG_TTYS0_BAUD=115200 This functionality is especially helpful on Guybrush. PSP Verstage is run on S0i3 resume. Today, if there is an error, the cbmem console is lost since it lives in the PSP SRAM. BUG=b:213828947, b:215599230 TEST=Build non-serial guybrush FW and verify no serial output happens in happy path. Inject a vboot error and perform an S0i3 suspend/resume. Verify CBMEM console gets dumped to the correct UART. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I997942204603362e51876a9ae25e493fe527437b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-25drivers/intel/fsp2_0: Make FSP Notify Phase APIs optionalSubrata Banik
The FSP API is used to notify the FSP about different phases in the boot process. The current FSP specification supports three notify phases: - Post PCI enumeration - Ready to Boot - End of Firmware This patch attempts to make calling into the FSP Notify Phase APIs optional by using native coreboot implementations to perform the required lock down and chipset register configuration prior boot to payload. BUG=b:211954778 TEST=Able to build brya without any compilation issue and coreboot log with this code changes when SKIP_FSP_NOTIFY_PHASE_READY_TO_BOOT and SKIP_FSP_NOTIFY_PHASE_END_OF_FIRMWARE config enabled. coreboot skipped calling FSP notify phase: 00000040. coreboot skipped calling FSP notify phase: 000000f0. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia95e9ec25ae797f2ac8e1c74145cf21e59867d64 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60402 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-25soc/intel/adl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
Since Tiger Lake platform, the HECI1 device can be disabled on Alder Lake platform using two different mechanism: A. Using PMC IPC command 0xA9. B. Sending SBI message under SMM. In current scope of Alder Lake the default implementation is using (B) sending sbi message under SMM. A follow up patch to add the possible options and let platform to choose the applicable one. List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. 3. Default enable HECI1 device in `chipset.cb` to ensure the HECI1 device can undergo the PCI enumeration and later based on the mainboard policy the HECI1 device can be disabled. Mainboards that choose to make HECI1 enable during boot don't override `DISABLE_HECI1_AT_PRE_BOOT` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie673e634fbc0bdece419c379d417b08dfb4819e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-25mb/google/brya/var/volmar: Enable EC keyboard backlightDavid Wu
Enable EC keyboard backlight for volmar. BUG=b:211891086 TEST=FW_NAME=volmar emerge-brya coreboot chromeos-bootimage Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I24ec7c8ca770cb438aabcf16b252032eef6d734d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-01-25mb/google/brya/variants/volmar: Configure GPIOs according to schematicsDavid Wu
Update initial gpio configuration for volmar BUG=b:211891086 TEST=FW_NAME=volmar emerge-brya coreboot Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I1bd3f1b3807b546d5a827ac89f0dc9bc8aaec40a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61206 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2022-01-25soc/intel/common: Include Alder Lake-N device IDsUsha P
Add Alder Lake-N System Agent, PCIE, UFS, IPU and CNVI device IDs. Document: Alder Lake N Platform EDS Volume 1 (Doc# 645548) Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I0a383816f818b794cf1211766c27937b3b8daa31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-25soc/intel/elkhartlake: Add PSE TSN supportLean Sheng Tan
Enable PSE GBE with following changes: 1. Configure PCH GBE related FSP UPD flags 2. Add PSE GBE ACPI devices 3. Refactor PCH GBE FSP-S code and merge it together with PSE GBE code Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: If3807ff5a4578be7b2c67064525fa5099950986a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-01-25soc/intel/elkhartlake: Introduce Intel PSELean Sheng Tan
The Intel® Programmable Services Engine (Intel® PSE) is a dedicated offload engine for IoT functions powered by an ARM Cortex-M7 microcontroller. It provides independent, low-DMIPS computing and low-speed I/Os for IoT applications, plus dedicated services for real-time computing and time-sensitive synchronization. The PSE hosts new functions, including remote out-of-band device management, network proxy, embedded controller lite and sensor hub. This CL enables the user to provide the base address of the PSE FW blob which will then be loaded by the FSP-S onto the ARM controller. PSE FW will do the initialization work of PSE controller and its peripherals. The loading of PSE FW should have negligible impact on boot time unless PSE controller could not locate the PSE FW and FSP will attempt to redo PSE FW loading and wait for PSE handshake until it times out. Once PSE controller locate the PSE FW, it will do initialization concurrently by itself with coreboot booting. It also adds PSE related FSP-S UPD settings which enable the setup of peripheral ownership (assigned to the PSE or x86 subsystem) and interrupts. These assignments need to take place at a given point in the boot process and cannot be changed later. To verify if PSE FW is loaded properly, the user could enable PchPseShellEnabled flag and the log will be printed at PSE UART 2. For further info please refer to doc #611825 (for HW overview) and #614110 (for PSE EDS). Signed-off-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Change-Id: Ifea08fb82fea18ef66bab04b3ce378e79a0afbf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2022-01-25mainboard/asus/p8x7x-series: Add new variant P8Z77-MKeith Hui
Constructed out of a mix of autoport results, p8z77-m_pro, and tool dumps. Working: - Core i7-3770K CPU - SeaBIOS 1.13.0 boot to Linux 5.4.24 and Windows 10 1903 (all further tests are under these versions) - USB2 / USB3 - SATA - Gigabit ethernet - CPU temp sensors (memtest86+ 5.0.1) - Hardware monitoring under Linux - Native and MRC raminit - PCIe GPU in both "PCIEX16" slots (16x/4x, nVidia Quadro 600) - Integrated graphics with Intel OpROM and libgfxinit (all ports) - Serial port - Windows with libgfxinit framebuffer - 2ch sound playback, Linux and Windows Not working: - PS/2 mouse - 6ch analog audio out - PCI POST card in PCI slot Untested: - PS/2 keyboard - Internal USB3 ports - Digital audio out Change-Id: If756e791ddce747cb1706414be8e41e83f88922b Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-25soc/mediatek: Save dramc_param header to mrc_cacheXi Chen
Fast-k flow may need to re-init header because mrc_cache doesn't store header. Storing header together with dparam data is better for data consistancy. TEST=fast calibration pass on Corsola BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I22982923dce06c9e770aa4f20f3dcd2f33685d84 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61294 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-25ec/google/chromeec: Add checks before creating Type C devicePrashant Malani
Check for situations where a Type C device isn't useful and avoid creating one for those scenarios. BUG=b:215199976 TEST=Tested on brya; verified that USBC device is created. Signed-off-by: Prashant Malani <pmalani@chromium.org> Tested-by: Alyssa Ross <hi@alyssa.is> Change-Id: I5e1598bd637ec9f50e7bf8dab9e3c757a30b9848 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61262 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2022-01-25soc/amd/sabrina/include/aoac_defs: add additional UARTsFelix Held
Compared to Cezanne there are 3 more UARTs controllers. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id98767197a21cb1a61f54fc9b256b10a9506c791 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-25soc/amd/sabrina/include/iomap: update MMIO device mappingsFelix Held
Compared to Cezanne there are 3 more UARTs with DMA controllers. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a3d255bb4976a55623f3a161e791e80f1d01c69 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-25soc/amd/cezanne: Increase PRERAM_CBMEM_CONSOLE_SIZE to 0x2000Raul E Rangel
Let's increase this to avoid losing any logs. BUG=b:213828947 TEST=Boot guybrush and no longer see *** Pre-CBMEM romstage console overflowed, log truncated! Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I3258145e352af3a75893c7cc96f36eb238c99abb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-25soc/amd/sabrina: use correct PCI IDsFelix Held
Replace the Renoir/Cezanne PCI IDs with the Sabrina ones that were added in commit 27b02c2eee68f4b6c8520c4737224aaaf81f137d (include/device/ pci_ids.h: add PCI IDs for AMD Family 17h Model A0h SoC). Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I427df6f8e8c08fb47ae8513b6cf1085d4294e28f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-25mb/amd/chausie: add mainboard as copy of mb/amd/majolicaFelix Held
To have the new AMD Sabrina SoC code tested, add the AMD Chausie mainboard as a copy of Majolica. This patch also changes the name from Majolica to Chausie, selects the Sabrina SoC instead of the Cezanne SoC and comments out the APCB_SOURCES since those aren't available in the 3rdparty/blobs repository yet. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic7b18f7a6ae5b8365234dd1227e0b1f7f37279da Reviewed-on: https://review.coreboot.org/c/coreboot/+/61079 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-25soc/amd/common/block/include/psp_efs: update defines for sabrinaFelix Held
Document #55758 Rev. 1.13 says that family 17h models 30h-3Fh and later use the spi_readmode_f17_mod_30_3f struct element for SPI_MODE_FIELD and spi_fastspeed_f17_mod_30_3f for SPI_SPEED_FIELD, so also use this for The AMD Sabrina SoC which is family 17h models A0h-AFh. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I336f9ea4a0defdf34e1af4b6d568cfe46488f75e Reviewed-on: https://review.coreboot.org/c/coreboot/+/61078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-25soc/amd/sabrina: add new SoC as copy of soc/amd/cezanneFelix Held
The Cezanne SoC code was initially started as a copy of example/min86 which only provides enough code to make the SoC code build. Then the different parts of the real SoC support was brought in patch by patch which also helped cleaning up and untangling the code. Since the Cezanne SoC code is now in a rather good shape and the Sabrina SoC is similar to the Cezanne SoC from the coreboot side, the new SoC support is started with a copy of the Cezanne code and all the needed changes will be applied on top of that. In order for the build not to fail due to duplicate files, this patch does not only copy the directory, but also replaces most instances of the Cezanne name with Sabrina. Since the needed blobs aren't available in the 3rdparty/amd_blobs repository yet, the Cezanne blobs are used for now so that the build will succeed. As soon as the proper blobs will be available in that repository, the code will be switched over to use them. As suggested by Nico, I added a "TODO: Check if this is still correct" comment to the beginning of every copied file and all SOC_AMD_COMMON_* Kconfig option selects which will be removed after re-verifying that each file and each selected common code block is still correct for the new SoC. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I978ddbdbfd70863acac17d98732936ec2be8fe3c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61077 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-25vc/amd/fsp/sabrina: add as a copy of vc/amd/fsp/cezanneFelix Held
The AMD Sabrina SoC will be using the FSP driver to call into the corresponding FSP binary to do its part of for the silicon initialization, so we need an initial set of FSP headers for the AMD Sabrina SoC code to build. Since the FSP interface for this SoC won't be too different from the Cezanne FSP interface, we'll start with a copy of the Cezanne FSP headers and update/replace them as soon as the proper FSP headers for Sabrina will be available. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ib3bf50598efe60673b81cf99da491866fb5dc121 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61076 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2022-01-24mb/google/brya/var/banshee: Configure TPM I2C BUSIvy Jian
Add I2C bus for banshee in Kconfig BUG=b:214871796 TEST=emerge-brya coreboot Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I67592051b367d5a5715f8d1253ea0c11d2deb1c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61312 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-24mb/google/brya/var/banshee: update overridetreeIvy Jian
Update override devicetree based on schematics BUG=b:214871796 TEST=emerge-brya coreboot Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: I05b63ebcded2f37dfb0f6c428e1fb993f476006a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61269 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-24Revert "SeaBIOS: Update stable release to 1.15.0"Paul Menzel
This reverts commit 2a8de6dafb7eec8ff9112b43888507fbc0d8f851. SeaBIOS 1.15.0 regresses on systems with NVMe devices [1]: > Greetings! Was this patch set tested on bare metal hardware? I'm > seeing "GRUB loading: Read Error" when attempting to boot from NVMe on > various Purism Librem devices (Intel Skylake thru Cometlake hardware). > Reverting this series resolves the issue. So, revert back to SeaBIOS 1.14.0. [1]: https://mail.coreboot.org/hyperkitty/list/seabios@seabios.org/message/SRECAGH4NE3XPDWJ2YI526L5LPSJWENJ/ Change-Id: If2ec738d478f11b203f499eaa28197357de6630d Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61179 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-24device: constify pciexp_find_extended_cap()Tim Wawrzynczak
The object pointed to by the struct device * argument is not modified, therefore it can be made const. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I300d2a59eb0513ddd08d4f1d2a3c6eb829e3f836 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61214 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-24mb/google/brya: Alphabetize BOARD_GOOGLE_* in Kconfig.nameTim Wawrzynczak
Change-Id: I624dd67b6ce9b87a6031b5467eacb9a8d7cda1cd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61216 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-24mb/google/brya/var/{taeko, taeko4es}: Modify touchpad i2c signalJoey Peng
Modify i2c signal to meet touchpad vendor spec. Please see issue tracker for more details. BUG=b:215487482 TEST=emerge-brya coreboot and check measured waveform in spec Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ib3797d4e232654ada97092d9f2742ca040d0f0e4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61271 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-24mb/system76/lemp10: Remove incorrect SPD address 0x50Tim Crawford
The Lemur Pro, with its mixed memory topology, only has a DIMM at address 0x52. Change-Id: Iecea8c70c7fd40943d86f8918f8e3b384538b5c3 Fixes: 4dcee4f21db5 ("mb/system76/lemp10: Add System76 Lemur Pro 10") Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60779 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-24soc/intel/common/block/pcie/rtd3: Fix PMC IPC method for CPU PCIe RPTim Wawrzynczak
When calling get_pcie_rp_pmc_idx(), the following code checked the return value to see if it was negative or `> CONFIG_MAX_ROOT_PORTS`. However, the expected return value for CPU PCIe RPs is above MAX_ROOT_PORTS. Since the static, local function is intended to return -1 or a valid value, drop the check for `> CONFIG_MAX_ROOT_PORTS`. Change-Id: I2039273ad246884cd8736a7f0355e621a706a526 Fixes: b6a15a7 ("soc/intel/common/block/pcie/rtd3: Update ACPI Update ACPI methods for CPU PCIe RPs") Tested-by: Tim Crawford <tcrawford@system76.com> Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Crawford <tcrawford@system76.com>
2022-01-24soc/amd/common: Make the function in cpu.c available in romstageZheng Bao
Change-Id: I909f74853a37a783582471e05071bc3d07e3dcf8 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61310 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-24mb/google/guybrush: Change DDI settings for guybrush variantsZheng Bao
Like the variant function to change DXIO settings, add a similar weak function to modify the DDI settings. Currently we follow the old way. Later we will find out a better way to avoid using weak function. Change-Id: I9898d717bc3025ea1ddc3b0db41325083324ed57 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61140 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Chris Wang <chris.wang@amd.corp-partner.google.com>
2022-01-24soc/mediatek: Extract dramc_param_header to a common headerXi Chen
To be shared with different SOCs, move the dramc_param_header struct as well DRAMC_PARAM_FLAG and DRAMC_PARAM_CONFIG enums to a common header file dramc_param_common.h. TEST=fast calibration pass BUG=b:204226005 Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I087971799803e47e34c30063b2b0bd0cfc5795ac Reviewed-on: https://review.coreboot.org/c/coreboot/+/61132 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-23Makefile.inc: Add `-fno-pie` to `ADAFLAGS_common`Paul Menzel
Building libgfxinit with Debian’s toolchain – latest test with *gnat-11* 11.2.0-13 from Debian sid/unstable – the build fails with the error below. E: Invalid reloc type: 10 E: Unable to create rmodule from 'build/cbfs/fallback/ramstage.debug'. Debian’s toolchain is built without enabling PIE by default. So, explicitly pass `-fno-pie` to `ADAFLAGS_common` to be independent from how the toolchain was built. TEST=*gnat* 11.2.0-13 successfully. builds purism/librem_cnl/variants/librem_mini with libgfxint. With the coreboot toolchain `make BUILD_TIMELESS=1` produces the same `build/coreboot.rom` for `BOARD_PURISM_LIBREM_MINI_V2=y` on top of commit 50251400d2 (sb/intel/common/firmware: Reword me_cleaner warning) with and without the change. Change-Id: I6661937906d95c130c6099f598d61b21e958fd85 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43759 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-23soc/amd/{common,cezanne,picasso}: Add PRE_X86_CBMEM_CONSOLE_SIZERaul E Rangel
This change splits the size of the console transfer region and size of the bootblock/romstage Pre-RAM console region. This allows having a larger Pre-RAM console while not impacting the size of the PSP verstage console. Instead of directly using the PRE_X86_CBMEM_CONSOLE_SIZE symbol in `setup_cbmem_console`, I chose to use the offsets provided in the transfer buffer. It would be nice to eventually do this for all the fields in the transfer buffer. BUG=b:213828947 TEST=Boot guybrush and verify verstage logs are no longer truncated Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8b8cc46600192a7db00f5c1f24c3c8304c4db31d Reviewed-on: https://review.coreboot.org/c/coreboot/+/61189 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-23lib/cbmem_console: Add cbmemc_copy_in functionRaul E Rangel
When running in verstage before bootblock, the PSP (ARM co-processor) is running with limited SRAM. It needs to stash the verstage console data internally until DRAM is brought up. Once DRAM is brought up the data is stashed in a "transfer buffer" region. In the current design, we are using the same region for the transfer buffer and the preram_cbmem_console region. This has the following downsides: 1) The pre-x86 buffer needs to be large enough to hold all the verstage, bootblock and romstage console logs. 2) On AMD platforms, the PSP verstage is signed. Changing the size of preram_cbmem_console after the fact will result in a mismatch of the transfer buffer between verstage and bootblock. This CL adds a new method that allows SoC specific code to copy the CBMEM console in the transfer buffer to the active CBMEM console. BUG=b:213828947 TEST=Boot guybrush and no longer see *** Pre-CBMEM romstage console overflowed, log truncated! Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Idc0ab8090db740e0d1b3d21d8968f26471f2e930 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-22mb/system76/lemp9: Make GPIO for touchpad interrupt level triggeredJeremy Soller
Fixes commit 6bcaf6f (mb/system76/lemp9: Configure IRQs as level triggered for HID over I2C), which changed the interrupt configuration in the device tree but not in the GPIO definitions. Tested on a System76 Lemur Pro (lemp9), multi-touch I2C-HID was working. Signed-off-by: Jeremy Soller <jeremy@system76.com> Change-Id: I7f0559675a65453a1ad071f96049549a2dc21378 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2022-01-22mb/google/guybrush/var/nipperkin: turn on WLAN ASPM L1ssKevin Chiu
BUG=b:198258604 BRANCH=guybrush TEST=emerge-guybrush coreboot WLAN works properly in OS Change-Id: Ie1f295eaa57af7c2942e1807b3a0c4dcd89cd696 Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-22mb/intel/adlrvp: Add missing CAM1 RST GPIO for ADL-NUsha P
Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I79f2206bee5403c3fb1c999918fbd2177d0d07ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/61163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-22soc/intel/alderlake: Implement get_soc_cpu_type helper functionSridhar Siricilla
The patch implements get_soc_cpu_type() helper function which determines whether the executing CPU is a small or a big core. This is the SoC-specific callback that must be implemented for SoCs that select SOC_INTEL_COMMON_BLOCK_ACPI_CPU_HYBRID. It will be called from set_cpu_type(). TEST=verified on Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Icd0d7e8a42c4b20d3e1d34998bca6321509df2d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61075 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-21commonlib: Add new "CSME ROM started execution" TSBora Guvendik
BUG=b:182575295 TEST=Boot to OS, check cbmem -t 990:CSME ROM started execution 0 944:CSE sent 'Boot Stall Done' to PMC 80,408 945:CSE started to handle ICC configuration 80,408 (0) 946:CSE sent 'Host BIOS Prep Done' to PMC 82,408 (2,000) 947:CSE received 'CPU Reset Done Ack sent' from PMC 242,408 (160,000) 0:1st timestamp 331,797 (89,389) 11:start of bootblock 359,484 (27,686) 12:end of bootblock 377,417 (17,932) Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I9e4ccd0b8c301e4eec1a09ee8919a577ade938ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/61168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-21util/cbmem: Rebase to handle negative timestampsBora Guvendik
Rebase all of the timestamps to the lowest (potentially negative) value in the list when displaying them. Also drop the extra `timestamp_print_*_entry` calls for time 0 and instead inserted a "dummy" timestamp entry of time 0 into the table. TEST=Boot to OS after adding negative timestamps, cbmem -t Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I7eb519c360e066d48dde205401e4ccd3b0b3d8a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59555 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-21timestamp: Allow timestamp_add to accept a negative numberBora Guvendik
Change timestamp_add to accept negative values for events that took place before coreboot started executing. TEST=Boot to OS, check cbmem -t Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I90afc13a8e92693d86e3358f05e0a0cb7cdbca9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-21soc/intel/common/cse: Add support to get CSME timestampsBora Guvendik
This command retrieves a set of boot performance timestamps CSME collected during the platform's last boot flow. BUG=b:182575295 TEST=Verify CSME timestamps after S3 and boot. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ic6f7962c49b38d458680d51ee1cd709805f73b66 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58993 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-21Revert "lib/cbmem_console: Move copy_console_buffer up in the file"Raul Rangel
This reverts commit 6a3bdf9aa5da6b620952c915330ce70702735456. Reason for revert: Oops, I thought I abandoned this. It's been replaced by https://review.coreboot.org/c/coreboot/+/61099/3 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Id18e8e69481bdd78fdd70116940ea435922a9e77 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2022-01-21mb/system76/*: Enable measured bootTim Crawford
Tested by checking PCR-2 data is recorded in cbmem log. Change-Id: I70cb9a93de44e75f3a3ed24979c243fccea1213d Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/59963 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-21mb/prodrive/atlas: Configure GPIO as per Atlas boardLean Sheng Tan
Update GPIO settings as per schematics v3. Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com> Change-Id: I685d0b7274e3a6e707fec37d051f4818860169ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/61116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-21mb/system76/gaze15: Set _UID for touchpad devicesTim Crawford
The _UID must be unique as these devices use the same _HID. Fixes BSOD when booting Windows 10. Change-Id: I67fda892a496dc9e5a6fa5e133ff0b35cde8fce7 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-21mb/google/brya/var/gimble{4es}: Decrease touchscreen T3 timing to 200msScott Chao
We set T3 as 300ms to meet Elan's spec, but the resume/suspend times are greater than 500ms, which is the spec for Chromebooks. The actual kernel timing has been measured, and given the ACPI delay after deasserting reset in addition to the delay until the kernel driver accesses the device, delaying only 200ms in the ACPI method is also sufficient to meet the 300ms requirement. BUG=b:210772498 BRANCH=none TEST=build and test touchscreen function on DUT. TEST=suspend, wake DUT and check touchscreen function. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I4bb4eda09686cb59b6e19c741aa2b78d84332d2a Reviewed-on: https://review.coreboot.org/c/coreboot/+/60270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-01-21soc/intel/common/gpio: Add PCH `Pad Configuration Lock` optionsSubrata Banik
This patch provides the possible options for PCH to allow `Pad Configuration Lock`. `SOC_INTEL_COMMON_BLOCK_GPIO_LOCK_USING_SBI` config is for Tiger Lake Point (TGP) and Alder Lake Point (ADP) PCH. BUG=b:211573253, b:211950520 TEST=None Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I7cf35893ab613b154a1073060081a09e561ffe56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2022-01-21soc/intel/common/gpio: Use const variable to get gpio bitmaskSubrata Banik
This patch introduces a `const bit_mask` variable to hold the gpio PAD mask value prior to sending the lock configuration command using the sideband interface. Additionally, this patch fixes the PAD lock overridden issue as below: Without this code change every consecutive PAD lock operation resets other bits in that register as below: After Locking pad 2 , pcr_read=0x4 After Locking pad 3 , pcr_read=0x8 After Locking pad 4 , pcr_read=0x10 After Locking pad 5 , pcr_read=0x20 After Locking pad 6 , pcr_read=0x40 After Locking pad 7 , pcr_read=0x80 After Locking pad 8 , pcr_read=0x100 With this code change all previous lock bits are getting preserved as below: After Locking pad 2 , pcr_read=0x4 After Locking pad 3 , pcr_read=0xc After Locking pad 4 , pcr_read=0x1c After Locking pad 5 , pcr_read=0x3c After Locking pad 6 , pcr_read=0x7c After Locking pad 7 , pcr_read=0xfc After Locking pad 8 , pcr_read=0x1fc BUG=b:211573253, b:211950520 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I342a666aa2d34bcc8ba33460396d1248f0c0f89f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60999 Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-21soc/intel/alderlake: Add ADL-P 2+8+2 (28W) VR configCurtis Chen
ADL-P 2+8+2 (28W) would have a match PD to ADL-P 4+8+2 (28W). Group them into the same group core "ADL_P_282_482_28W_CORE". BUG=b:211365920 TEST=Build and check fsp log to confirm the settings are set properly. Signed-off-by: Curtis Chen <curtis.chen@intel.com> Change-Id: I3f92c0f5d717dd33ac478fbaa883f3e972e7a7de Reviewed-on: https://review.coreboot.org/c/coreboot/+/61196 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-21mb/google/brya/var/kano: Prevent camera LED blinking during bootJim Lai
Camera LED blinks as sensor is being probed during kernel boot, which misleads user to belive camera has been turned on. Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. BUG=b:214155527 TEST=Build and boot Kano to OS. Verify entries in SSDT and monitor LED during boot. Signed-off-by: Jim Lai <jim.lai@intel.com> Change-Id: I92f1e88d0fcce49660a95d4402c8c4161e320168 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61109 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-21mb/google/puff/var/dooly: Add fw_config probe for ALC5682-VD/ALC5682-VSTony Huang
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name. Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config. ALC5682-VD: _HID = "10EC5682" ALC5682I-VS: _HID = "RTL5682" BUG=b:210501484 BRANCH=puff TEST=build Change-Id: I84bc378d6b00828366309be7dbf56a61702a14da Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2022-01-21lib/cbmem_console: Move copy_console_buffer up in the fileRaul E Rangel
This will make the method available earlier. This is needed for the next CL. BUG=b:213828947 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Iee911a2debcfbf4309d2e866401b74f2a6c18feb Reviewed-on: https://review.coreboot.org/c/coreboot/+/61188 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-21soc/intel/ehl: Replace dt `HeciEnabled` by `HECI1 disable` configSubrata Banik
The only option to make HECI1 function disable on Elkhart Lake SoC platform is using SBI under SMM mode. List of changes: 1. Drop `HeciEnabled` from dt and dt chip configuration. 2. Replace all logic that disables HECI1 based on the `HeciEnabled` chip config with `DISABLE_HECI1_AT_PRE_BOOT` config. Mainboards that choose to make HECI1 enable during boot don't override `heci1 disable` config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I76c625e6221fdef1343599e7dbc7739caa91bf98 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60727 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng Lean Tan <sheng.tan@9elements.com>
2022-01-21soc/intel/icl: Rework on HECI1 disable configsSubrata Banik
The only option to make HECI1 function disable on Ice Lake SoC platform is using SBI under SMM mode. Hence, this patch makes DISABLE_HECI1_AT_PRE_BOOT=y default and selects `HECI_DISABLE_USING_SMM` config for Ice Lake. Also, drop `HeciEnabled` from chip configuration and guard heci_disable() using DISABLE_HECI1_AT_PRE_BOOT config. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: If4155e5c7eeb019f7dce59acd5b82720baddcb43 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60732 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-20soc/amd/picasso/bootblock: drop unused includesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I837e1f8727adefb9227ac7df2ff715245957be2c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61258 Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-20soc/amd/cezanne,picasso: factor out common early non-car cache setupFelix Held
This implementation is the same for all SoC that select SOC_AMD_COMMON_BLOCK_NONCAR, so factor it out to the common AMD non-CAR CPU support code folder. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I53528f0bb75e9d945740ad5065c75e7de7b5878f Reviewed-on: https://review.coreboot.org/c/coreboot/+/61257 Reviewed-by: Raul Rangel <rrangel@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-20soc/amd/cezanne/include/espi.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I393feab8550a7124ab2982ff3d256e3491d27b4b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61213 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-20soc/amd/common/vboot: Verify the size of the transfer bufferRaul E Rangel
This will verify that signed verstage binaries and the bootblock code executing agree on the transfer buffer struct size. BUG=b:213828947 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I597e38fe0a37416ffd3bc01fd974fa8f6610a88c Reviewed-on: https://review.coreboot.org/c/coreboot/+/61187 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2022-01-20mb/google/brya/var/banshee: update gpio settingsIvy Jian
Configure GPIOs according to schematics BUG=b:214871796 TEST=emerge-brya coreboot Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Id6862ff442310953b4749cef7880814f3c3f6d60 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61201 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-20mb/google/brya/var/banshee: Add SODIMM supportEric Lai
Banshee will use SODIMM. Add memory.c to override baseboard. BUG=b:208910227 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I4d2fe986b786b3553b67910b589fce12647ee69a Reviewed-on: https://review.coreboot.org/c/coreboot/+/61192 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-20mb/google/brya: Add MEMORY_SODIMM and MEMORY_SOLDERDOWN configEric Lai
MEMORY_SOLDERDOWN puts SPD in cbfs and read part number from CBI. MEMORY_SODIMM puts SPD cache in FMAP. BUG=b:208910227 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Idab48293fb5b584ecb4c8f270d2c376456954553 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61193 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-20mb/google/brya: Create banshee variantIvy Jian
Create the banshee variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:214871796 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_BANSHEE Signed-off-by: Ivy Jian <ivy_jian@compal.corp-partner.google.com> Change-Id: Ib4f943a109f945204a9b0a8de9b99580bf01c87e Reviewed-on: https://review.coreboot.org/c/coreboot/+/61176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com>
2022-01-20libpayload/Makefile.inc: Fix ar calls to support llvm-arJakub Czapiga
llvm-ar does not support "open" script command, and fails with an error. This patch fixes it by removing lines `$(AR) rc <object-files>` and it puts them as "addmod" commands. This way all object files and archives can be packed into one archive. Change-Id: I0c53d1d613b5edc321e268d1d996fac3146680f8 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61182 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <patrick@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2022-01-20efi_datatype: Add typedef for EFI_PHYSICAL_ADDRESSAnil Kumar
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Ie09e337ee1790a06689681fca087edcfd89d215f Reviewed-on: https://review.coreboot.org/c/coreboot/+/60778 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-19soc/intel/alderlake: Add method to determine the cpu typeSridahr Siricilla
set_cpu_type(): It determines the CPU type (big or small) that is executing the function, and marks the global_cpu_type's array slot which is corresponds to the executing CPU's index if the CPU type is big core. get_cpu_index(): It determines the index from LAPIC Ids. This is required to expose CPPC3 package in ascending order of CPUs' LAPIC ids. So, the function returns CPU's position from the ascending order list of LAPIC ids. TEST=Tested CPU index calculation, core type determination on Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: If4ceb24d9bb1e808750bf618c29b2b9ea6d4191b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59360 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-19mb/google/brya/var/{taeko, taeko4es}: Add gpio.c in romstageKevin Chang
Add file gpio.c in romstage. BUG=b:213828931 TEST=Build FW and system can power on normally. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: Ie868fe7ada9deb8918d6c7ba538332cbe539ee44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-19arch/riscv: Fix some SMP related headersKyösti Mälkki
Change-Id: I58419450dbe34741b4f5b4920f435fdb91e9df22 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2022-01-19src: Remove unused <stdbool>Elyes HAOUAS
Change-Id: I8567a567d979bcc0c1c710f6f231d7ecdc82b126 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-19soc/intel/common/cpu: Use SoC overrides to get CPU privilege levelSubrata Banik
This patch implements a SoC overrides to check CPU privilege level as the MSR is not consistent across platforms. For example: On APL/GLK/DNV, it's MSR 0x120 and CNL onwards it's MSR 0x151. BUG=b:211573253, b:211950520 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I515f0a3548bc5d6250e30f963d46f28f3c1b90b3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-19soc/intel/alderlake: Rework the GPIO PAD Pin numbersSubrata Banik
This patch creates a `relative increment by 1` macro to let SoC gpio pad configuration to be more flexible while adding support for newer PCH SoC. With this changes adding GPIO controller support for PCH-N would become really simple without too much of code duplication. For example: ADL-N has added `GPP_I` pins into community 1 hence, the additional code for `PCH-N` whould appear incremetal to ADL-P. > #define GPP_B 0x0 > #define GPP_T INC(GPP_B) > #define GPP_A INC(GPP_T) > #define GPP_R INC(GPP_A) > #define GPD INC(GPP_R) > #define GPP_S INC(GPD) > if CONFIG(SOC_INTEL_ALDERLAKE_PCH_N) > #define GPP_I INC(GPP_S) > #define GPP_H INC(GPP_I) > #else > #define GPP_H INC(GPP_S) > #endif > #define GPP_D INC(GPP_H) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ie3b2183381b877da0a6e5a27f5176f0e21e0c9fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/61165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2022-01-19mb/google/cherry: add configuration for dojoKevin Chiu
BUG=b:211528578 TEST=emerge-cherry coreboot Signed-off-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Change-Id: I3bd9803b4e47882df9fe351229478e4cb1630363 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2022-01-19mb/google/dedede/var/bugzzy: Add SAR sensorSeunghwan Kim
Present the Semtech SX9360 SAR sensor that protects the LTE antenna. The sensor is connected to i2c bus I2C1. BUG=b:194318328 BRANCH=dedede TEST=emerge-dedede coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: I9feef9d132c60738bafb22ceb7d3468c798fab9b Reviewed-on: https://review.coreboot.org/c/coreboot/+/59609 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-19driver/i2c: Add sx9360 driverSeunghwan Kim
Add driver for setting up Semtech sx9360 SAR sensor. The driver is based on sx9310.c. The core of the driver is the same, but the bindings are slightly different. Registers are documented in the kernel tree: Documentation/devicetree/bindings/iio/proximity/semtech,sx9360.yaml [https://patchwork.kernel.org/project/linux-iio/patch/20211213024057.3824985-4-gwendal@chromium.org/] Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Change-Id: I0a912f184e6f3501f894cca24c0d71a2c3087516 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-183rdparty/amd_blobs: advance submodule pointerRaul E Rangel
This adds the following commits: * 22ce1b5 cezanne: Upgrade SMU to 64.60.0 * dd37ad2 cezanne: Update ABL to 0x1B096070 * 01fbf5d cezanne: Update SMU to 64.58.0 * f638765 cezanne: Update ABLs to 0x1A296070 BUG=none TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8f51cb007ce4127428b7b81095fb2c7afb33e608 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61046 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2022-01-18soc/amd/{picasso,cezanne}: Enable CBMEM_PRINT_PRE_BOOTBLOCK_CONTENTSRaul E Rangel
This will help debugging verstage failures. BUG=b:213828947 TEST=Boot guybrush and verify verstage logs are printed before bootblock messages. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia60991b3e81c19c24ceb69193840dde873ef3346 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-01-18mb/intel/adlrvp: Add wake events for AC connect/disconnectKrishna Prasad Bhat
Enable S3/S0ix wake events for AC connect/disconnect on Alder Lake RVP. BUG=None BRANCH=None TEST=Verify board wakes from S0ix on AC connect/disconnect. Change-Id: Iaf92821fd69a59624e58cb8af3896e2b6998723f Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-18soc/intel/alderlake: Add eMMC device into chipset.cbKrishna Prasad Bhat
Add eMMC device into chipset.cb and keep it `off` by default. eMMC device is applicable only for Alder Lake N SOC. Change-Id: I2bc38ee5814688409feb7e4531c1daa5b54953c0 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2022-01-18soc/intel/common: Add Alder Lake N eMMC device IDKrishna Prasad Bhat
Add eMMC device ID for Alder Lake N SOC. Reference: Alder Lake N Platform EDS Volume 1 (Doc# 645548) Change-Id: Id35ec2d508bec8ff7d6f1c5fbfaf209d42b25c72 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61124 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2022-01-18mb/intel/adlrvp_n: Configure EC in RW GPIOKrishna Prasad Bhat
EC_IN_RW signal from EC GPIO is connected to GPIO E7 of SOC. This GPIO can be used to check EC status trusted (LOW: in RO) or untrusted (HIGH: in RW). BRANCH=None BUG=None TEST=Issue manual recovery and confirm DUT is entering recovery mode. Change-Id: Ib8b6be9fcda24bd2bb479b5b6c01f24a6e9c7b1f Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60896 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2022-01-18src/include/acpi: Move CPPC_PACKAGE_NAME macro definitionSridhar Siricilla
The patch moves the CPPC_PACKAGE_NAME macro definition from file acpi/acpigen.c to include/acpi/acpigen.h file since the CPPC_PACKAGE_NAME method will get called from cpu/intel/common in a later patch. TEST=Built the code for Brya Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Change-Id: Ic547445cdbe2b1a3efe44390bd127f577386e7fc Reviewed-on: https://review.coreboot.org/c/coreboot/+/59358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-18mb/google/brya/var/brask: Turn on I2C1 for TPMAlan Huang
The latest schematics changes the TPM I2C from I2C3 to I2C1. This patch turns on I2C1 and turns off I2C3. BUG=b:211886429 TEST=Test if proto 1 can boot into Chrome OS successfully. Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I0e94c900b48adf10880aae2abb47e08d1bd9e19b Reviewed-on: https://review.coreboot.org/c/coreboot/+/61135 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com>
2022-01-18Documentation: gpio: Fix tableSubrata Banik
This patch fixes the indentation issue introduced with commit 0c1c2dec (Documentation: Capture anomalies between pad and lock reset type). BUG=b:211573253, b:211950520 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ib6974cda26e6f7968688a2a7c30c7351d212a780 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61107 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-18soc/intel/{adl,common}: Support alderlake host device id 0x4619Kane Chen
Host device id 0x4619 is missed in few coreboot tables so that coreboot can't recognize and config it properly. Document Number: 690222 BUG:b:214665785, b:214680767 Change-Id: I95908bdc0a736bafedb328dda2a00b5473de3d88 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-17sb/intel/common/firmware: Reword me_cleaner warningAngel Pons
That vendor firmware still works after applying `me_cleaner` doesn't mean that coreboot will also work with the same broken ME firmware. Instead, one should first test coreboot with the original, unmodified ME firmware to make sure coreboot works properly, and only then consider using `me_cleaner` with coreboot. Otherwise, one would end up with a non-booting or otherwise misbehaving system when trying to use coreboot and `me_cleaner` without having tested coreboot with the original ME firmware beforehand, which is hard to diagnose as the problem may only happen when the ME isn't running normally. Change-Id: I1626d747a99969faf7db37c10cf7d87e3977744a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-17Update chromeec submodule to upstream mainzhixingma
Updating from commit id 4c21b57eb: 2021-07-19 11:36:07 +0000 - (pd: Fix missing polarity_rm_dts in some conditions) to commit id e486b388a: 2022-01-12 21:11:11 +0000 - (zephyr: Update power policy for API change) This brings in 2212 new commits. Signed-off-by: zhixingma <zhixing.ma@intel.com> Change-Id: I4437f09c3193ec7c89f7f9550940a0fa5464a511 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Thejaswani Putta <theja427@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Selma Bensaid <selma.bensaid@intel.com>
2022-01-17mb/google/auron: Remove addition of EC firmware to buildTim Wawrzynczak
In https://crrev.com/c/3069716, the samus EC firmware was removed from the `main` branch, therefore in order to update the `chromeec` 3rdparty submodule, the automatic build and inclusion of samus EC firmware into coreboot's `master` branch has to be dropped as well. Change-Id: I6fcdd3b7925b6ec33ba48892ed750c29bb60634c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2022-01-17cr50: Increase cr50 i2c probe timeoutRob Barnes
Turns out 150ms isn't enough in the worst reset conditions. On guybrush the TPM is reset in S0i3 and the CR50 is allowed to hibernate. The CR50 is woken up and initialized early during S0i3 resume. Occasionally the CR50 isn't ready before the probe times out. BUG=b:213828947 BRANCH=None TEST=suspend_stress_test -c 1000 Change-Id: Ifda438080cf1ad2796c7061223a6a97b8e6e9987 Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Keith Short <keithshort@chromium.org>
2022-01-17drivers/intel/fsp2_0: Add FSP 2.3 supportAnil Kumar
FSP 2.3 specification introduces following changes: 1. FSP_INFO_HEADER changes Updated SpecVersion from 0x22 to 0x23 Updated HeaderRevision from 5 to 6 Added ExtendedImageRevision FSP_INFO_HEADER length changed to 0x50 2. Added FSP_NON_VOLATILE_STORAGE_HOB2 Following changes are implemented in the patch to support FSP 2.3: - Add Kconfig option - Update FSP build binary version info based on ExtendedImageRevision field in header - New NV HOB related changes will be pushed as part of another patch Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Ica1bd004286c785aa8a431f39d8efc69982874c1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/59324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2022-01-17mb/google/brya/variants/*: Add cpu pcie rp flagsTracy Wu
Along with commit f94405219c (soc/intel/alderlake: Hook up FSP-S CPU PCIe UPDs), we need to set cpu pcie rp flags in devicetree now. This CL is to add proper cpu pcie flags (PCIE_RP_LTR and PCIE_RP_AER) in all intel projects or system will be blocked at PKGC2R with root port LTR not enable. BUG=b:214009181 TEST=Build and DUT (Kano) can enter deeper PKGC state normally. Signed-off-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Change-Id: I0d8721bf1454448b7fc14655f0e4513001469a18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/61073 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-17mb/google/brya/var/taeko4es: Enable Bayhub LV2 driverKevin Chang
Some SKUs of google/taeko4es have a Bayhub LV2 card reader chip, therefore enable the corresponding driver for the mainboard. BUG=b:204343849 TEST=Build FW and checking SD card reader register is correct. Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I3d2ea3db9df38e7b0cac4c32e1fca579ff43e5bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/61115 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2022-01-17mb/google/dedede/var/bugzzy: Set core display clock to 172.8 MHzSeunghwan Kim
When using the default initial core display clock frequency (648MHz), Jasper Lake board might have a rare stability issue where the startup of Chrome OS in secure mode may hang during re-initializing display in kernel graphic driver. Bugzzy didn't show this problem so far, but Intel recommends slowing the initial core display clock frequency down to 172.8 MHz to prevent this potential problem. Depend on CL: https://review.coreboot.org/c/coreboot/+/60009 The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0 (172.8 MHz) for bugzzy. BUG=None BRANCH=dedede TEST=Build firmware and check the DUTs can boot up in secure mode well. Change-Id: I592b2d7c814881074bd2fef9906f2450326c1fcd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/61022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2022-01-17pci_ids.h: Make Denverton IDs consistent with other Intel SoCsJeff Daly
Align Denverton PCI ID define names with other Intel SoCs. Also, update the names in SoC code accordingly. Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Change-Id: Id4b4d971ef8f4b3ec5920209d345edbbcfae4dec Reviewed-on: https://review.coreboot.org/c/coreboot/+/60879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2022-01-17soc/intel/cnl: Use Kconfig to disable HECI1Subrata Banik
This patch makes DISABLE_HECI1_AT_PRE_BOOT=y default for Cannon Lake and ensures disable_heci1() is guarded against this config. Also, makes dt CSE PCI device `on` by default. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Idd57d2713fe83de5fb93e399734414ca99977d0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/60725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2022-01-17Revert "mb/google/dedede/var/beadrix: Remove SD controller"Teddy Shih
This reverts commit bcd7873ea80be0ee576a10e6a11b7dcf8294ffb5. Reason for revert: It makes beadrix can't boot to os without depthcharge change. The depthcharge change related with fw_config and will effect other variants. ================ error log ================ ... Starting depthcharge on Beadrix... src/vboot/util/flag.c:50 flag_install(): Gpio already set up for flag 5. =========================================== BUG=b:204882915 BRANCH=None TEST=Build and boot into OS. Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Id5e76fc78a56d30caf9f805a8a430f176a653bbe Reviewed-on: https://review.coreboot.org/c/coreboot/+/60849 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-17mb/google/dedede/var/beadrix: Add memory part and generate DRAM IDTeddy Shih
This change adds memory part used by variant beadrix to mem_part_used.txt and generates DRAM ID allocated to the part. BUG=b:204882915, b:210123929 BRANCH=None TEST=Run part_id_gen to generate SPD id Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com> Change-Id: Ibff150bb4e742f32641da661cfca6594d18c52e9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60242 Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-01-17mb/google/brya/var/agah: update gpio overrideTony Huang
Configure GPIOs according to schematics BUG=b:210970640 TEST=emerge-brya coreboot Change-Id: Icfd1e09761e51aca9c23f3ab340adac7a66a3ada Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/60891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 07:42:25 +0000