diff options
Diffstat (limited to 'src/mainboard/google')
3 files changed, 49 insertions, 0 deletions
diff --git a/src/mainboard/google/dedede/variants/taranza/Makefile.inc b/src/mainboard/google/dedede/variants/taranza/Makefile.inc index f6abb34693..c4bbd20ede 100644 --- a/src/mainboard/google/dedede/variants/taranza/Makefile.inc +++ b/src/mainboard/google/dedede/variants/taranza/Makefile.inc @@ -3,3 +3,4 @@ ramstage-y += gpio.c ramstage-y += variant.c +ramstage-y += ramstage.c diff --git a/src/mainboard/google/dedede/variants/taranza/overridetree.cb b/src/mainboard/google/dedede/variants/taranza/overridetree.cb index b85d043356..3b2f69390e 100644 --- a/src/mainboard/google/dedede/variants/taranza/overridetree.cb +++ b/src/mainboard/google/dedede/variants/taranza/overridetree.cb @@ -25,6 +25,19 @@ chip soc/intel/jasperlake }, }" + # Power limit config + register "power_limits_config[JSL_N4500_6W_CORE]" = "{ + .tdp_pl1_override = 6, + .tdp_pl2_override = 20, + .tdp_pl4 = 60, + }" + + register "power_limits_config[JSL_N5100_6W_CORE]" = "{ + .tdp_pl1_override = 6, + .tdp_pl2_override = 20, + .tdp_pl4 = 60, + }" + # Enable Root Port 3 (index 2) for LAN # External PCIe port 7 is mapped to PCIe Root Port 3 register "PcieRpEnable[2]" = "1" diff --git a/src/mainboard/google/dedede/variants/taranza/ramstage.c b/src/mainboard/google/dedede/variants/taranza/ramstage.c new file mode 100644 index 0000000000..afb3fc7e34 --- /dev/null +++ b/src/mainboard/google/dedede/variants/taranza/ramstage.c @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/variants.h> + +/* + * Psys_pmax considerations + * + * Given the hardware design in taranza, the serial shunt resistor is 0.01ohm. + * The full scale of hardware PSYS signal 1.6v maps to system current 6.009A + * instead of real system power. The equation is shown below: + * PSYS = 1.6v ~= (0.01ohm x 6.009A) x 50 (INA213, gain 50V/V) x R631/(R631 + R638) + * R631/(R631 + R638) = 0.5325 = 36K / (36K + 31.6K) + * + * The Psys_pmax is a SW setting which tells IMVP9.1 the mapping between system input + * current and the actual system power. Since there is no voltage information + * from PSYS, different voltage input would map to different Psys_pmax settings: + * For Type-C 15V, the Psys_pmax should be 15v x 6.009A = 90.135W + * For Type-C 20V, the Psys_pmax should be 20v x 6.009A = 120.18W + * For a barrel jack, the Psys_pmax should be 19v x 6.009A = 114.171W + * + * Imagine that there is a type-c 100W (20V/5A) connected to DUT w/ full loading, + * and the Psys_pmax setting is 120W. Then IMVP9.1 can calculate the current system + * power = 120W * 5A / 6.009A = 100W, which is the actual system power. + */ +const struct psys_config psys_config = { + .efficiency = 97, + .psys_imax_ma = 6009, + .bj_volts_mv = 19000, + .bj_power_w = 65, +}; + +void variant_devtree_update(void) +{ + variant_update_psys_power_limits(&psys_config); +} |