soc/intel/xeon_sp: Enable PMC support

PMC support was not enabled on Xeon_sp platforms. This involves turning
on SOC_INTEL_COMMON_BLOCK_PMC and then adding the proper hooks in SOC
specific code.  This patch leverages code from the Skylake project and
adds the bare minimum hooks to leverage PMC common code. Most
importantly this enables power management registers located in the PMC
device (under ACPI_BASE_ADDRESS). Access to this device is also needed
for SMM setup and handling.

TEST=build for Tiogapass and enable the following Kconfig options:
	select SOC_INTEL_COMMON_BLOCK_PMC
	select ACPI_INTEL_HARDWARE_SLEEP_VALUES
        select CPU_INTEL_COMMON_SMM

Boot the system and ensure pmbase is programmed. (Look for pmbase in
debug messages). Secondly check that SMIs are enabled by looking at the
debug messages (search for "Enabling SMIs") and verifying in HW by
reading IO port 0x530.

Change-Id: I6d57a8282a8b6dc4314f156c39deb09535575cbd
Signed-off-by: Rocky Phagura <rphagura@fb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42289
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>

4 files changed, 122 insertions, 6 deletions

diff --git a/src/soc/intel/xeon_sp/include/soc/gpe.h b/src/soc/intel/xeon_sp/include/soc/gpe.h
new file mode 100644
index 0000000000..c4acf1c1f3
--- /dev/null
+++ b/src/soc/intel/xeon_sp/include/soc/gpe.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _SOC_GPE_H_
+#define _SOC_GPE_H_
+
+/* GPE_31_0 */
+#define GPE0_DW0_00		0
+#define GPE0_DW0_01		1
+#define GPE0_DW0_02		2
+#define GPE_MAX			GPE0_DW0_02
+#endif /* _SOC_GPE_H_ */
diff --git a/src/soc/intel/xeon_sp/include/soc/iomap.h b/src/soc/intel/xeon_sp/include/soc/iomap.h
index 68f6f558ae..f23f0ec9ae 100644
--- a/src/soc/intel/xeon_sp/include/soc/iomap.h
+++ b/src/soc/intel/xeon_sp/include/soc/iomap.h
@@ -19,7 +19,9 @@
 #define SPI_BASE_ADDRESS             0xfe010000
 #define SPI_BASE_SIZE                0x1000
 
+#define TCO_BASE_ADDRESS             0x400
 #define ACPI_BASE_ADDRESS            0x500
+#define ACPI_BASE_SIZE		0x100
 
 /* Video RAM */
 #define VGA_BASE_ADDRESS             0xa0000
@@ -28,6 +30,9 @@
 /* High Performance Event Timer */
 #define HPET_BASE_ADDRESS            0xfed00000
 
+#define PCH_PWRM_BASE_ADDRESS	0xfe000000
+#define PCH_PWRM_BASE_SIZE	0x10000
+
 #define P2SB_BAR                     CONFIG_PCR_BASE_ADDRESS
 
 #endif /* _SOC_IOMAP_H_ */
diff --git a/src/soc/intel/xeon_sp/include/soc/pm.h b/src/soc/intel/xeon_sp/include/soc/pm.h
index c4c1a885bc..f5a45c6106 100644
--- a/src/soc/intel/xeon_sp/include/soc/pm.h
+++ b/src/soc/intel/xeon_sp/include/soc/pm.h
@@ -3,15 +3,103 @@
 #ifndef _SOC_PM_H_
 #define _SOC_PM_H_
 
+#include <acpi/acpi.h>
+#include <soc/gpe.h>
 #include <soc/iomap.h>
 #include <soc/pmc.h>
 
-#define PM1_CNT                   0x04
-#define PM1_STS                   0x00
-#define PM1_TMR                   0x08
-#define PM2_CNT                   0x50
+/* ACPI_BASE_ADDRESS / PMBASE */
+#define PM1_STS			0x00
+#define  WAK_STS		(1 << 15)
+#define  PCIEXPWAK_STS		(1 << 14)
+#define  PRBTNOR_STS		(1 << 11)
+#define  RTC_STS		(1 << 10)
+#define  PWRBTN_STS		(1 << 8)
+#define  GBL_STS		(1 << 5)
+#define PM1_EN			0x02
+#define  RTC_EN			(1 << 10)
+#define  PWRBTN_EN		(1 << 8)
+#define  GBL_EN			(1 << 5)
+#define  TMROF_EN		(1 << 0)
+#define PM1_CNT			0x04
+#define  GBL_RLS		(1 << 2)
+#define  SCI_EN			(1 << 0)
+#define PM1_TMR			0x08
+#define SMI_EN			0x30
+#define  ESPI_SMI_EN		(1 << 28)
+#define  PERIODIC_EN		(1 << 14)
+#define  TCO_SMI_EN		(1 << 13)
+#define  APMC_EN		(1 <<  5)
+#define  SLP_SMI_EN		(1 <<  4)
+#define  BIOS_EN		(1 <<  2)
+#define  EOS			(1 <<  1)
+#define  GBL_SMI_EN		(1 <<  0)
+#define SMI_STS			0x34
+#define  SMI_STS_BITS			32
+#define  GPIO_UNLOCK_SMI_STS_BIT	27
+#define  PERIODIC_STS_BIT		14
+#define  TCO_STS_BIT			13
+#define  PM1_STS_BIT			8
+#define  APM_STS_BIT			5
+#define  SMI_ON_SLP_EN_STS_BIT		4
+#define  BIOS_STS_BIT			2
+#define GPE_CNTL		0x42
+#define  SWGPE_CTRL		(1 << 1)
+#define DEVACT_STS		0x44
+#define PM2_CNT			0x50
+#define GPE0_REG_MAX		4
+#define GPE0_REG_SIZE		32
+#define GPE0_STS(x)		(0x80 + (x * 4))
+#define GPE0_EN(x)		(0x90 + (x * 4))
+#define  GPE_STD		3	/* 0x8c/0x9c = Standard GPE */
+#define GPE_STS_RSVD            GPE_STD
+#define   GPIO_T2_STS		(1 << 15)
+#define   PME_B0_STS		(1 << 13)
+#define   PME_STS		(1 << 11)
+#define   PCI_EXP_STS		(1 << 9)
+#define   SMB_WAK_STS		(1 << 7)
+#define   TCOSCI_STS		(1 << 6)
+#define GPE0_EN(x)		(0x90 + (x * 4))
+#define   GPIO_T2_EN		(1 << 15)
+#define   ESPI_EN		(1 << 14)
+#define   PME_B0_EN		(1 << 13)
+#define   PME_EN		(1 << 11)
+#define   PCI_EXP_EN		(1 << 9)
+#define   TCOSCI_EN		(1 << 6)
 
-#define GPE0_REG_MAX              4
-#define GPE0_STS(x)              (0x80 + (x * 4))
+#define ENABLE_SMI_PARAMS \
+	(APMC_EN | GBL_SMI_EN | EOS)
+
+/* This is defined as ETR3 in EDS. We named it as ETR here for consistency */
+#define ETR		0xac
+#define  CF9_LOCK	(1 << 31)
+#define  CF9_GLB_RST	(1 << 20)
+
+#define PRSTS		0x10
+
+struct chipset_power_state {
+	uint16_t pm1_sts;
+	uint16_t pm1_en;
+	uint32_t pm1_cnt;
+	uint16_t tco1_sts;
+	uint16_t tco2_sts;
+	uint32_t gpe0_sts[4];
+	uint32_t gpe0_en[4];
+	uint32_t gen_pmcon_a;
+	uint32_t gen_pmcon_b;
+	uint32_t gblrst_cause[2];
+	uint32_t prev_sleep_state;
+} __packed;
+
+/* Get base address PMC memory mapped registers. */
+uint8_t *pmc_mmio_regs(void);
+
+/* Set the DISB after DRAM init */
+void pmc_set_disb(void);
+
+/* Return non-zero when RTC failure happened. */
+int rtc_failure(void);
+
+uint16_t get_pmbase(void);
 
 #endif
diff --git a/src/soc/intel/xeon_sp/include/soc/pmc.h b/src/soc/intel/xeon_sp/include/soc/pmc.h
index 49e58d366a..40b41c7d59 100644
--- a/src/soc/intel/xeon_sp/include/soc/pmc.h
+++ b/src/soc/intel/xeon_sp/include/soc/pmc.h
@@ -21,10 +21,22 @@
 #define  SCIS_IRQ23		7
 #define PWRMBASE		0x48
 #define GEN_PMCON_A		0xa0
+#define  DISB			(1 << 23)
+#define  GBL_RST_STS		(1 << 16)
 #define  SMI_LOCK		(1 << 4)
 #define GEN_PMCON_B		0xa4
 #define  SLP_STR_POL_LOCK	(1 << 18)
 #define  ACPI_BASE_LOCK		(1 << 17)
 #define  RTC_BATTERY_DEAD	(1 << 2)
+#define  SUS_PWR_FLR		(1 << 14)
+#define  HOST_RST_STS		(1 << 9)
+#define  PWR_FLR		(1 << 1)
+#define  SLEEP_AFTER_POWER_FAIL	(1 << 0)
 
+/* Memory mapped IO registers in PMC */
+#define GPIO_GPE_CFG		0x120
+#define  GPE0_DWX_MASK		0xf
+#define GPE0_DW_SHIFT(x)	(4 * (x))
+#define GBLRST_CAUSE0		0x124
+#define GBLRST_CAUSE1		0x128
 #endif