summaryrefslogtreecommitdiff
path: root/src/northbridge/amd/gx2
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2010-04-27 06:56:47 +0000
committerStefan Reinauer <stepan@openbios.org>2010-04-27 06:56:47 +0000
commit14e22779625de673569c7b950ecc2753fb915b31 (patch)
tree14a6ed759e116e9e6e9bbd7f499b74b96d6cc072 /src/northbridge/amd/gx2
parent0e1e8065e303030c39c3f2c27e5d32ee58a16c66 (diff)
Since some people disapprove of white space cleanups mixed in regular commits
while others dislike them being extra commits, let's clean them up once and for all for the existing code. If it's ugly, let it only be ugly once :-) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5507 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/amd/gx2')
-rw-r--r--src/northbridge/amd/gx2/chipsetinit.c30
-rw-r--r--src/northbridge/amd/gx2/grphinit.c2
-rw-r--r--src/northbridge/amd/gx2/northbridge.c26
-rw-r--r--src/northbridge/amd/gx2/northbridgeinit.c84
-rw-r--r--src/northbridge/amd/gx2/pll_reset.c26
-rw-r--r--src/northbridge/amd/gx2/raminit.c8
6 files changed, 88 insertions, 88 deletions
diff --git a/src/northbridge/amd/gx2/chipsetinit.c b/src/northbridge/amd/gx2/chipsetinit.c
index 620f56452d..f0b99e7e9d 100644
--- a/src/northbridge/amd/gx2/chipsetinit.c
+++ b/src/northbridge/amd/gx2/chipsetinit.c
@@ -61,7 +61,7 @@ static struct msrinit CS5536_CLOCK_GATING_TABLE[] = {
#ifdef UNUSED_CODE
struct acpiinit {
- unsigned short ioreg;
+ unsigned short ioreg;
unsigned long regdata;
unsigned short iolen;
};
@@ -116,21 +116,21 @@ static void pmChipsetInit(void)
port = (PMLogic_BASE + 0x034);
val = 0x0A0 ; /* 5ms*/
outl(val, port);
-
+
/* PM_WKD*/
port = (PMLogic_BASE + 0x030);
outl(val, port);
-
+
/* PM_SED*/
port = (PMLogic_BASE + 0x014);
val = 0x04601 ; /* 5ms*/
outl(val, port);
-
+
/* PM_SIDD*/
port = (PMLogic_BASE + 0x020);
val = 0x08C02 ; /* 10ms*/
outl(val, port);
-
+
/* GPIO24 OUT_AUX1 function is the external signal for 5535's
* vsb_working_aux which is de-asserted when 5535 enters Standby (S3 or
* S5) state. On Hawk, GPIO24 controls all voltage rails except Vmem
@@ -154,7 +154,7 @@ static void pmChipsetInit(void)
* Programming of GPIO11 will be done by VSA PM code. During VSA
* Init. BIOS writes PM Core Virual Register indicating if S1 Clocks
* should be On or Off. This is based on a Setup item. We do not want
- * to leave GPIO11 enabled because of a Hawk board problem. With
+ * to leave GPIO11 enabled because of a Hawk board problem. With
* GPIO11 enabled in S3, something is back-driving GPIO11 causing it
* to float to 1.6-1.7V.
*/
@@ -188,7 +188,7 @@ static uint32_t FlashPort[] = {
* ChipsetFlashSetup
*
* Flash LBARs need to be setup before VSA init so the PCI BARs have
- * correct size info. Call this routine only if flash needs to be
+ * correct size info. Call this routine only if flash needs to be
* configured (don't call it if you want IDE).
*
**************************************************************************/
@@ -240,16 +240,16 @@ static void ChipsetFlashSetup(void)
}
-
+
/****************************************************************************
- *
+ *
* ChipsetGeodeLinkInit
*
* Handle chipset specific GeodeLink settings here.
* Called from GeodeLink init code.
- *
+ *
****************************************************************************/
-static void
+static void
ChipsetGeodeLinkInit(void)
{
msr_t msr;
@@ -269,7 +269,7 @@ ChipsetGeodeLinkInit(void)
return;
totalmem = sizeram() << 20 - 1;
- totalmem >>= 12;
+ totalmem >>= 12;
totalmem = ~totalmem;
totalmem &= 0xfffff;
msr.lo = totalmem;
@@ -292,7 +292,7 @@ gx2_chipsetinit (struct northbridge_amd_gx2_config *nb)
printk(BIOS_DEBUG, "Companion is a %s\n", is_5536()?"CS5536":"CS5535");
#ifdef UNUSED_CODE
- /* we hope NEVER to be in coreboot when S3 resumes
+ /* we hope NEVER to be in coreboot when S3 resumes
if (! IsS3Resume()) */
{
struct acpiinit *aci = acpi_init_table;
@@ -319,14 +319,14 @@ gx2_chipsetinit (struct northbridge_amd_gx2_config *nb)
msrnum = MSR_SB_USB2 + 8;
wrmsr(msrnum, msr);
}
-
+
/* set hd IRQ */
outl (GPIOL_2_SET, GPIOL_INPUT_ENABLE);
outl (GPIOL_2_SET, GPIOL_IN_AUX1_SELECT);
/* Allow IO read and writes during a ATA DMA operation. */
/* This could be done in the HD rom but do it here for easier debugging. */
-
+
msrnum = ATA_SB_GLD_MSR_ERR;
msr = rdmsr(msrnum);
msr.lo &= ~0x100;
diff --git a/src/northbridge/amd/gx2/grphinit.c b/src/northbridge/amd/gx2/grphinit.c
index a30ba78373..e59a838afe 100644
--- a/src/northbridge/amd/gx2/grphinit.c
+++ b/src/northbridge/amd/gx2/grphinit.c
@@ -4,7 +4,7 @@
#include <device/device.h>
#include "chip.h"
#include "northbridge.h"
-
+
// FIXME handle UMA properly.
#define VIDEO_MB 8 // MB of video memory
diff --git a/src/northbridge/amd/gx2/northbridge.c b/src/northbridge/amd/gx2/northbridge.c
index e74a8e33f8..98acbc9f95 100644
--- a/src/northbridge/amd/gx2/northbridge.c
+++ b/src/northbridge/amd/gx2/northbridge.c
@@ -19,7 +19,7 @@
#define NORTHBRIDGE_FILE "northbridge.c"
-/* todo: add a resource record. We don't do this here because this may be called when
+/* todo: add a resource record. We don't do this here because this may be called when
* very little of the platform is actually working.
*/
int
@@ -128,7 +128,7 @@ static void irq_init_steering(struct device *dev, u16 irq_map) {
printk(BIOS_DEBUG, "%s(%p [%08X], %04X)\n", __func__, dev, pciAddr, irq_map);
/* The IRQ steering values (in hex) are effectively dcba, where:
- * <a> represents the IRQ for INTA,
+ * <a> represents the IRQ for INTA,
* <b> represents the IRQ for INTB,
* <c> represents the IRQ for INTC, and
* <d> represents the IRQ for INTD.
@@ -146,10 +146,10 @@ static void irq_init_steering(struct device *dev, u16 irq_map) {
/*
* setup_gx2_cache
*
- * Returns the amount of memory (in KB) available to the system. This is the
+ * Returns the amount of memory (in KB) available to the system. This is the
* total amount of memory less the amount of memory reserved for SMM use.
*
- */
+ */
static int
setup_gx2_cache(void)
{
@@ -200,13 +200,13 @@ setup_gx2(void)
membytes = size_kb * 1024;
/* NOTE! setup_gx2_cache returns the SIZE OF RAM - RAMADJUST!
- * so it is safe to use. You should NOT at this point call
- * sizeram() directly.
+ * so it is safe to use. You should NOT at this point call
+ * sizeram() directly.
*/
/* we need to set 0x10000028 and 0x40000029 */
/*
- * These two descriptors cover the range from 1 MB (0x100000) to
+ * These two descriptors cover the range from 1 MB (0x100000) to
* SYSTOP (a.k.a. TOM, or Top of Memory)
*/
@@ -271,16 +271,16 @@ setup_gx2(void)
static void enable_shadow(device_t dev)
{
-
+
}
-static void northbridge_init(device_t dev)
+static void northbridge_init(device_t dev)
{
unsigned long m;
struct northbridge_amd_gx2_config *nb = (struct northbridge_amd_gx2_config *)dev->chip_info;
printk(BIOS_DEBUG, "northbridge: %s()\n", __func__);
-
+
enable_shadow(dev);
irq_init_steering(dev, nb->irqmap);
@@ -421,7 +421,7 @@ static void pci_domain_set_resources(device_t dev)
continue;
ramreg += 1 << (((mem_config & (DIMM_SZ << i)) >> (i + 8)) + 2);
}
-
+
tomk = ramreg << 10;
/* Sort out the framebuffer size */
@@ -455,7 +455,7 @@ static struct device_operations pci_domain_ops = {
.enable_resources = enable_childrens_resources,
.init = 0,
.scan_bus = pci_domain_scan_bus,
-};
+};
static void cpu_bus_init(device_t dev)
{
@@ -516,5 +516,5 @@ static void enable_dev(struct device *dev)
struct chip_operations northbridge_amd_gx2_ops = {
CHIP_NAME("AMD GX (previously GX2) Northbridge")
- .enable_dev = enable_dev,
+ .enable_dev = enable_dev,
};
diff --git a/src/northbridge/amd/gx2/northbridgeinit.c b/src/northbridge/amd/gx2/northbridgeinit.c
index 4ad5af23bc..7053f5e5d9 100644
--- a/src/northbridge/amd/gx2/northbridgeinit.c
+++ b/src/northbridge/amd/gx2/northbridgeinit.c
@@ -126,14 +126,14 @@ ShadowInit(struct gliutable *gl)
msr = rdmsr(gl->desc_name);
if (msr.lo == 0) {
- writeglmsr(gl);
+ writeglmsr(gl);
}
}
-/* NOTE: transcribed from assembly code. There is the usual redundant assembly nonsense in here.
+/* NOTE: transcribed from assembly code. There is the usual redundant assembly nonsense in here.
* CLEAN ME UP
*/
-/* yes, this duplicates later code, but it seems that is how they want it done.
+/* yes, this duplicates later code, but it seems that is how they want it done.
*/
static void
SysmemInit(struct gliutable *gl)
@@ -141,8 +141,8 @@ SysmemInit(struct gliutable *gl)
msr_t msr;
int sizembytes, sizebytes;
- /*
- * Figure out how much RAM is in the machine and alocate all to the
+ /*
+ * Figure out how much RAM is in the machine and alocate all to the
* system. We will adjust for SMM and DMM now and Frame Buffer later.
*/
sizembytes = sizeram();
@@ -165,7 +165,7 @@ SysmemInit(struct gliutable *gl)
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__,
gl->desc_name, msr.hi, msr.lo);
-
+
}
static void
DMMGL0Init(struct gliutable *gl) {
@@ -188,11 +188,11 @@ DMMGL0Init(struct gliutable *gl) {
msr.hi |= (DMM_OFFSET >> 24);
msr.lo = DMM_OFFSET << 8;
msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff;
-
+
wrmsr(gl->desc_name, msr); // MSR - See table above
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
-
+
}
static void
DMMGL1Init(struct gliutable *gl) {
@@ -211,7 +211,7 @@ DMMGL1Init(struct gliutable *gl) {
/* hmm. AMD source has SMM here ... SMM, not DMM? We think DMM */
printk(BIOS_ERR, "%s: warning, using DMM_SIZE even though AMD used SMM_SIZE\n", __func__);
msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff;
-
+
wrmsr(gl->desc_name, msr); // MSR - See table above
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
@@ -238,7 +238,7 @@ SMMGL0Init(struct gliutable *gl) {
msr.lo = SMM_OFFSET << 8;
msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
-
+
wrmsr(gl->desc_name, msr); // MSR - See table above
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
@@ -254,7 +254,7 @@ SMMGL1Init(struct gliutable *gl) {
msr.hi |= (SMM_OFFSET >> 24);
msr.lo = SMM_OFFSET << 8;
msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
-
+
wrmsr(gl->desc_name, msr); // MSR - See table above
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
@@ -265,31 +265,31 @@ GLIUInit(struct gliutable *gl){
while (gl->desc_type != GL_END){
switch(gl->desc_type){
- default:
+ default:
/* For Unknown types: Write then read MSR */
writeglmsr(gl);
case SC_SHADOW: /* Check for a Shadow entry*/
ShadowInit(gl);
break;
-
+
case R_SYSMEM: /* check for a SYSMEM entry*/
SysmemInit(gl);
break;
-
+
case BMO_DMM: /* check for a DMM entry*/
DMMGL0Init(gl);
break;
-
+
case BM_DMM : /* check for a DMM entry*/
DMMGL1Init(gl);
break;
-
+
case BMO_SMM : /* check for a SMM entry*/
SMMGL0Init(gl);
break;
-
+
case BM_SMM : /* check for a SMM entry*/
- SMMGL1Init(gl);
+ SMMGL1Init(gl);
break;
}
gl++;
@@ -413,7 +413,7 @@ static void GLPCIInit(void){
/* */
/* 5535 NB Init*/
- /* */
+ /* */
msrnum = GLPCI_ARB;
msr = rdmsr(msrnum);
msr.hi |= GLPCI_ARB_UPPER_PRE0_SET | GLPCI_ARB_UPPER_PRE1_SET;
@@ -432,19 +432,19 @@ static void GLPCIInit(void){
msr.lo &= ~ (0x07 << GLPCI_CTRL_LOWER_IRFT_SHIFT);
msr.lo |= 0x06 << GLPCI_CTRL_LOWER_IRFT_SHIFT;
-
+
msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_FTH_SHIFT);
msr.hi |= 0x0F << GLPCI_CTRL_UPPER_FTH_SHIFT;
-
+
msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_RTH_SHIFT);
msr.hi |= 0x0F << GLPCI_CTRL_UPPER_RTH_SHIFT;
-
+
msr.hi &= ~ (0x0f << GLPCI_CTRL_UPPER_SBRTH_SHIFT);
msr.hi |= 0x0F << GLPCI_CTRL_UPPER_SBRTH_SHIFT;
-
+
msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_WTO_SHIFT);
msr.hi |= 0x06 << GLPCI_CTRL_UPPER_WTO_SHIFT;
-
+
msr.hi &= ~ (0x03 << GLPCI_CTRL_UPPER_ILTO_SHIFT);
msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT;
wrmsr(msrnum, msr);
@@ -478,7 +478,7 @@ static void GLPCIInit(void){
/* * Modified:*/
/* **/
/* ***************************************************************************/
-static void
+static void
ClockGatingInit (void){
msr_t msr;
struct msrinit *gating = ClockGatingDefault;
@@ -489,7 +489,7 @@ ClockGatingInit (void){
NOSTACK bx, GetNVRAMValueBX
cmp al, TVALUE_CG_OFF
je gatingdone
-
+
cmp al, TVALUE_CG_DEFAULT
jb allon
ja performance
@@ -517,7 +517,7 @@ performance:
}
-static void
+static void
GeodeLinkPriority(void){
msr_t msr;
struct msrinit *prio = GeodeLinkPriorityTable;
@@ -537,7 +537,7 @@ GeodeLinkPriority(void){
}
-
+
/*
* Get the GLIU0 shadow register settings
* If the setShadow function is used then all shadow descriptors
@@ -613,7 +613,7 @@ static void setShadowRCONF(uint32_t shadowHi, uint32_t shadowLo)
static void setShadowGLPCI(uint32_t shadowHi, uint32_t shadowLo)
{
msr_t msr;
-
+
// Set the Enable Register.
msr = rdmsr(GLPCI_REN);
@@ -667,7 +667,7 @@ static void setShadow(uint64_t shadowSettings)
* Destroys:
*
**************************************************************************/
-static void
+static void
shadowRom(void)
{
uint64_t shadowSettings = getShadow();
@@ -688,7 +688,7 @@ shadowRom(void)
* ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of rom chipselect area
* DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst.
* SYSTOP(27:8) = top of system memory
- * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough
+ * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough
*
***************************************************************************/
#define SYSMEM_RCONF_WRITETHROUGH 8
@@ -716,17 +716,17 @@ RCONFInit(void)
while (1);
}
-// sysdescfound:
+// sysdescfound:
/* found the descriptor... get its contents */
msr = rdmsr(gl->desc_name);
- /* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the
- * top 8 bits go into 0-7 of edx.
+ /* 20 bit address - The bottom 12 bits go into bits 20-31 in eax, the
+ * top 8 bits go into 0-7 of edx.
*/
msr.lo = (msr.lo & 0xFFFFFF00) | (msr.hi & 0xFF);
msr.lo = ((msr.lo << 12) | (msr.lo >> 20)) & 0x000FFFFF;
msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; // 8
-
+
// Set Default SYSMEM region properties
msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; // 8 (or ~8)
@@ -739,7 +739,7 @@ RCONFInit(void)
// Set ROMBASE cache properties.
msr.hi |= ((ROMRC_RCONF_DEFAULT >> 8) | (ROMRC_RCONF_DEFAULT << 24));
-
+
// now program RCONF_DEFAULT
wrmsr(CPU_RCONF_DEFAULT, msr);
@@ -776,15 +776,15 @@ northbridgeinit(void)
GLIUInit(gliutables[i]);
GeodeLinkPriority();
-
+
shadowRom();
-
- // GeodeROM ensures that the BIOS waits the required 1 second before
+
+ // GeodeROM ensures that the BIOS waits the required 1 second before
// allowing anything to access PCI
// PCIDelay();
-
+
RCONFInit();
-
+
// The cacheInit function in GeodeROM tests cache and, among other things,
// makes sure all INVD instructions are treated as WBINVD. We do this
// because we've found some programs which require this behavior.
@@ -792,7 +792,7 @@ northbridgeinit(void)
msr = rdmsr(CPU_DM_CONFIG0);
msr.lo |= DM_CONFIG0_LOWER_WBINVD_SET;
wrmsr(CPU_DM_CONFIG0, msr);
-
+
/* Now that the descriptor to memory is set up.*/
/* The memory controller needs one read to synch its lines before it can be used.*/
i = *(int *) 0;
diff --git a/src/northbridge/amd/gx2/pll_reset.c b/src/northbridge/amd/gx2/pll_reset.c
index 898e31dcd4..c1b22a28a0 100644
--- a/src/northbridge/amd/gx2/pll_reset.c
+++ b/src/northbridge/amd/gx2/pll_reset.c
@@ -125,7 +125,7 @@ static unsigned int get_memory_speed(void)
#define DEFAULT_MDIV 3
#define DEFAULT_VDIV 2
-#define DEFAULT_FBDIV 22 // 366/244 ; 24 400/266 018 ;300/200
+#define DEFAULT_FBDIV 22 // 366/244 ; 24 400/266 018 ;300/200
static void pll_reset(void)
{
@@ -134,10 +134,10 @@ static void pll_reset(void)
unsigned SyncBits; // store the sync bits in up ebx
// clear the Bypass bit
-
+
// If the straps say we are in bypass and the syspll is not AND there are no software
// bits set then FS2 or something set up the PLL and we should not change it.
-
+
msrGlcpSysRstpll = rdmsr(GLCP_SYS_RSTPLL);
msrGlcpSysRstpll.lo &= ~RSTPPL_LOWER_BYPASS_SET;
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
@@ -145,15 +145,15 @@ static void pll_reset(void)
// If the "we've already been here" flag is set, don't reconfigure the pll
if ( !(msrGlcpSysRstpll.lo & PLLCHECK_COMPLETED ) )
{ // we haven't configured the PLL; do it now
-
+
// Store PCI33(0)/66(1), SDR(0)/DDR(1), and CRT(0)/TFT(1) in upper esi to get to the
// correct Strap Table.
post_code(POST_PLL_INIT);
-
+
// configure for DDR
msrGlcpSysRstpll.lo &= ~(1 << RSTPPL_LOWER_SDRMODE_SHIFT);
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
-
+
// Use Manual settings
// UseManual:
post_code(POST_PLL_MANUAL);
@@ -161,7 +161,7 @@ static void pll_reset(void)
// DIV settings manually entered.
// ax = VDIV, upper eax = MDIV, upper ecx = FbDIV
// use gs and fs since we don't need them.
-
+
// ProgramClocks:
// ax = VDIV, upper eax = MDIV, upper ecx = FbDIV
// move everything into ebx
@@ -174,7 +174,7 @@ static void pll_reset(void)
// FbDIV
MDIV_VDIV_FBDIV |= (plldiv2fbdiv[DEFAULT_FBDIV] << RSTPLL_UPPER_FBDIV_SHIFT);
- // write GLCP_SYS_RSTPPL (GLCP reg 0x14) with clock values
+ // write GLCP_SYS_RSTPPL (GLCP reg 0x14) with clock values
msrGlcpSysRstpll.lo &= ~(1 << RSTPPL_LOWER_SDRMODE_SHIFT);
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
@@ -192,15 +192,15 @@ static void pll_reset(void)
// Check for Bypass mode.
if (msrGlcpSysRstpll.lo & RSTPPL_LOWER_BYPASS_SET)
{
- // If we are in BYPASS PCI may or may not be sync'd but CPU and GeodeLink will.
+ // If we are in BYPASS PCI may or may not be sync'd but CPU and GeodeLink will.
SyncBits |= RSTPPL_LOWER_CPU_SEMI_SYNC_SET;
}
else
{
- // CheckPCIsync:
+ // CheckPCIsync:
// If FBdiv/Mdiv is evenly divisible then set the PCI semi-sync. FB is always greater
// look up the real divider... if we get a 0 we have serious problems
- if ( !(fbdiv2plldiv[((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_FBDIV_SHIFT) & 0x3f)] %
+ if ( !(fbdiv2plldiv[((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_FBDIV_SHIFT) & 0x3f)] %
(((msrGlcpSysRstpll.hi >> RSTPLL_UPPER_MDIV_SHIFT) & 0x0F) + 2)) )
{
SyncBits |= RSTPPL_LOWER_PCI_SEMI_SYNC_SET;
@@ -234,13 +234,13 @@ static void pll_reset(void)
msrGlcpSysRstpll.lo |= (RSTPPL_LOWER_PLL_RESET_SET + RSTPPL_LOWER_PD_SET);
msrGlcpSysRstpll.lo |= RSTPPL_LOWER_CHIP_RESET_SET;
wrmsr(GLCP_SYS_RSTPLL, msrGlcpSysRstpll);
-
+
// You should never get here..... The chip has reset.
post_code(POST_PLL_RESET_FAIL);
while (1);
} // we haven't configured the PLL; do it now
-
+
}
// End of Goodrich version of pll_reset
///////////////////////////////////////////////////////////////////////////////
diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c
index b1cb1af6b3..3f99cab8ee 100644
--- a/src/northbridge/amd/gx2/raminit.c
+++ b/src/northbridge/amd/gx2/raminit.c
@@ -61,7 +61,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
//print_debug("sdram_enable step 6\n");
/* 7. Reset DLL, Bit 27 is undocumented in GX datasheet,
- * it is documented in LX datasheet */
+ * it is documented in LX datasheet */
/* load Mode Register by set and clear PROG_DRAM */
msr = rdmsr(0x20000018);
msr.lo |= ((0x01 << 27) | 0x01);
@@ -85,10 +85,10 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
/* load RDSYNC */
msr = rdmsr(0x2000001f);
msr.hi = 0x000ff310;
- /* the above setting is supposed to be good for "slow" ram. We have found that for
- * some dram, at some clock rates, e.g. hynix at 366/244, this will actually
+ /* the above setting is supposed to be good for "slow" ram. We have found that for
+ * some dram, at some clock rates, e.g. hynix at 366/244, this will actually
* cause errors. The fix is to just set it to 0x310. Tested on 3 boards
- * with 3 different type of dram -- Hynix, PSC, infineon.
+ * with 3 different type of dram -- Hynix, PSC, infineon.
* I am leaving this comment here so that at some future time nobody is tempted
* to mess with this setting -- RGM, 9/2006
*/