mb/google/corsola: Initialize kingler display

ANX7625 is used on Kingler board as the eDP bridge IC. Enable ANX7625
and configure display in mainboard_init() to support display in
firmware screen.

BUG=b:209930699
TEST=saw firmware display on eDP panel of kingler board.

Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Change-Id: Ie8de5d8ba150d3ae086c7635601dbc0846aebe91
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60398
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>

6 files changed, 145 insertions, 1 deletions

diff --git a/src/mainboard/google/corsola/Kconfig b/src/mainboard/google/corsola/Kconfig
index e381502421..702c3fc41c 100644
--- a/src/mainboard/google/corsola/Kconfig
+++ b/src/mainboard/google/corsola/Kconfig
@@ -35,6 +35,9 @@ config BOARD_SPECIFIC_OPTIONS
 	select EC_GOOGLE_CHROMEEC_SPI
 	select MAINBOARD_HAS_SPI_TPM_CR50 if VBOOT
 	select MAINBOARD_HAS_TPM2 if VBOOT
+	select MAINBOARD_HAS_NATIVE_VGA_INIT
+	select HAVE_LINEAR_FRAMEBUFFER
+	select DRIVER_ANALOGIX_ANX7625
 
 config MAINBOARD_DIR
 	string
diff --git a/src/mainboard/google/corsola/Makefile.inc b/src/mainboard/google/corsola/Makefile.inc
index e1e363c4ed..30ee6c156f 100644
--- a/src/mainboard/google/corsola/Makefile.inc
+++ b/src/mainboard/google/corsola/Makefile.inc
@@ -16,6 +16,7 @@ romstage-y += sdram_configs.c
 ramstage-y += memlayout.ld
 ramstage-y += boardid.c
 ramstage-y += chromeos.c
+ramstage-y += display.c
 ramstage-y += mainboard.c
 ramstage-y += regulator.c
 ramstage-y += reset.c
diff --git a/src/mainboard/google/corsola/display.c b/src/mainboard/google/corsola/display.c
new file mode 100644
index 0000000000..6e4cbe596c
--- /dev/null
+++ b/src/mainboard/google/corsola/display.c
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <delay.h>
+#include <drivers/analogix/anx7625/anx7625.h>
+#include <edid.h>
+#include <gpio.h>
+#include <soc/ddp.h>
+#include <soc/dsi.h>
+#include <soc/gpio_common.h>
+#include <soc/i2c.h>
+#include <soc/mtcmos.h>
+
+#include "display.h"
+#include "gpio.h"
+
+/* Set up backlight control pins as output pin and power-off by default */
+static void configure_backlight_and_bridge(void)
+{
+	/* Disable backlight before turning on bridge */
+	gpio_output(GPIO_AP_EDP_BKLTEN, 0);
+	gpio_output(GPIO_BL_PWM_1V8, 0);
+	gpio_output(GPIO_EN_PP3300_DISP_X, 1);
+
+	/* Turn on bridge */
+	gpio_output(GPIO_EDPBRDG_RST_L, 0);
+	gpio_output(GPIO_EN_PP1000_EDPBRDG, 1);
+	gpio_output(GPIO_EN_PP1800_EDPBRDG, 1);
+	gpio_output(GPIO_EN_PP3300_EDPBRDG, 1);
+	mdelay(14);
+	gpio_output(GPIO_EDPBRDG_PWREN, 1);
+	mdelay(10);
+	gpio_output(GPIO_EDPBRDG_RST_L, 1);
+}
+
+static int anx7625_setup(u8 i2c_bus, struct edid *edid)
+{
+	if (anx7625_init(i2c_bus) < 0) {
+		printk(BIOS_ERR, "%s: Can't init ANX7625 bridge\n", __func__);
+		return -1;
+	}
+	if (anx7625_dp_get_edid(i2c_bus, edid) < 0) {
+		printk(BIOS_ERR, "%s: Can't get panel's edid\n", __func__);
+		return -1;
+	}
+	return 0;
+}
+
+static int bridge_setup(u8 i2c_bus, struct edid *edid)
+{
+	if (CONFIG(BOARD_GOOGLE_KINGLER_COMMON))
+		return anx7625_setup(i2c_bus, edid);
+	else
+		printk(BIOS_ERR, "%s: There is no bridge IC supported\n", __func__);
+
+	return -1;
+}
+
+static int bridge_post_poweron(u8 i2c_bus, struct edid *edid)
+{
+	if (CONFIG(BOARD_GOOGLE_KINGLER_COMMON))
+		return anx7625_dp_start(i2c_bus, edid);
+
+	return 0;
+}
+
+int configure_display(void)
+{
+	struct edid edid;
+	const u8 i2c_bus = I2C0;
+
+	printk(BIOS_INFO, "%s: Starting display init\n", __func__);
+
+	configure_backlight_and_bridge();
+	mtk_i2c_bus_init(i2c_bus, I2C_SPEED_FAST);
+
+	if (bridge_setup(i2c_bus, &edid) < 0) {
+		printk(BIOS_ERR, "%s: Failed to set bridge\n", __func__);
+		return -1;
+	}
+
+	const char *name = edid.ascii_string;
+	if (name[0] == '\0')
+		name = "unknown name";
+	printk(BIOS_INFO, "%s: '%s %s' %dx%d@%dHz\n", __func__,
+	       edid.manufacturer_name, name, edid.mode.ha, edid.mode.va,
+	       edid.mode.refresh);
+
+	mtcmos_display_power_on();
+	mtcmos_protect_display_bus();
+
+	edid_set_framebuffer_bits_per_pixel(&edid, 32, 0);
+	mtk_ddp_init();
+	u32 mipi_dsi_flags = (MIPI_DSI_MODE_VIDEO |
+			      MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+			      MIPI_DSI_MODE_LPM |
+			      MIPI_DSI_MODE_EOT_PACKET);
+
+	if (mtk_dsi_init(mipi_dsi_flags, MIPI_DSI_FMT_RGB888, 4, &edid, NULL) < 0) {
+		printk(BIOS_ERR, "%s: Failed in DSI init\n", __func__);
+		return -1;
+	}
+
+	if (bridge_post_poweron(i2c_bus, &edid) < 0) {
+		printk(BIOS_ERR, "%s: Failed to post poweron bridge\n", __func__);
+		return -1;
+	}
+
+	mtk_ddp_mode_set(&edid);
+	fb_new_framebuffer_info_from_edid(&edid, (uintptr_t)0);
+
+	return 0;
+}
diff --git a/src/mainboard/google/corsola/display.h b/src/mainboard/google/corsola/display.h
new file mode 100644
index 0000000000..525422bd40
--- /dev/null
+++ b/src/mainboard/google/corsola/display.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __MAINBOARD_GOOGLE_CORSOLA_DISPLAY_H__
+#define __MAINBOARD_GOOGLE_CORSOLA_DISPLAY_H__
+
+int configure_display(void);
+
+#endif
diff --git a/src/mainboard/google/corsola/gpio.h b/src/mainboard/google/corsola/gpio.h
index c2f789eae1..8f8fb72776 100644
--- a/src/mainboard/google/corsola/gpio.h
+++ b/src/mainboard/google/corsola/gpio.h
@@ -9,7 +9,6 @@
 #define GPIO_BT_WAKE_AP_ODL	GPIO(EINT6)
 #define GPIO_WIFI_INT_ODL	GPIO(EINT7)
 #define GPIO_DPBRDG_INT_ODL	GPIO(EINT8)
-#define GPIO_EDPBRDG_INT_ODL	GPIO(EINT9)
 #define GPIO_EC_AP_HPD_OD	GPIO(EINT10)
 #define GPIO_TCHPAD_INT_ODL	GPIO(EINT11)
 #define GPIO_TCHSCR_INT_1V8_ODL	GPIO(EINT12)
@@ -27,6 +26,17 @@
 #define GPIO_EN_SPK		GPIO(PERIPHERAL_EN3)
 #define GPIO_BEEP_ON		GPIO(PERIPHERAL_EN4)
 
+/* GPIOs for display */
+#define GPIO_AP_EDP_BKLTEN		GPIO(PERIPHERAL_EN5)
+#define GPIO_BL_PWM_1V8			GPIO(DISP_PWM)
+#define GPIO_EN_PP3300_DISP_X		GPIO(PERIPHERAL_EN6)
+#define GPIO_EDPBRDG_RST_L		GPIO(LCM_RST)
+#define GPIO_EN_PP1000_EDPBRDG		GPIO(ANT_SEL0)
+#define GPIO_EN_PP1800_EDPBRDG		GPIO(ANT_SEL1)
+#define GPIO_EN_PP3300_EDPBRDG		GPIO(ANT_SEL2)
+#define GPIO_EDPBRDG_INT_ODL		GPIO(EINT9)
+#define GPIO_EDPBRDG_PWREN		GPIO(DSI_TE)
+
 void setup_chromeos_gpios(void);
 
 #endif
diff --git a/src/mainboard/google/corsola/mainboard.c b/src/mainboard/google/corsola/mainboard.c
index fa4aa18597..910d8d6ea9 100644
--- a/src/mainboard/google/corsola/mainboard.c
+++ b/src/mainboard/google/corsola/mainboard.c
@@ -1,12 +1,14 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 
 #include <bl31.h>
+#include <bootmode.h>
 #include <console/console.h>
 #include <device/device.h>
 #include <soc/msdc.h>
 #include <soc/spm.h>
 #include <soc/usb.h>
 
+#include "display.h"
 #include "gpio.h"
 
 #include <arm-trusted-firmware/include/export/plat/mediatek/common/plat_params_exp.h>
@@ -37,6 +39,13 @@ static void mainboard_init(struct device *dev)
 		printk(BIOS_ERR, "spm init failed, system suspend may not work\n");
 
 	register_reset_to_bl31();
+
+	if (display_init_required()) {
+		if (configure_display() < 0)
+			printk(BIOS_ERR, "%s: Failed to init display\n", __func__);
+	} else {
+		printk(BIOS_INFO, "%s: Skipped display init\n", __func__);
+	}
 }
 
 static void mainboard_enable(struct device *dev)