summaryrefslogtreecommitdiff
path: root/src/mainboard
diff options
context:
space:
mode:
authorRizwan Qureshi <rizwan.qureshi@intel.com>2017-03-16 13:19:22 +0530
committerDuncan Laurie <dlaurie@chromium.org>2017-03-16 16:25:40 +0100
commit6a1503e9db4bb9b5e6bb47f298eb3677c0673bc4 (patch)
tree063e09f8aa78a274c4bf1278d2daf779532198a0 /src/mainboard
parent887e7936f8dbeb104dd44e8877a1255a5ca66907 (diff)
google/poppy: Use rt5663 interrupt as GpioInt instead of PIRQ
The kernel driver for rt5663 expects to get an interrupt on both a rising and falling edge, and using a legacy interrupt doesn't provide that flexibility. Instead configure this pin as a GPIO and use the interrupt through the GPIO controller. This allows using GpioInt() with ActiveBoth setting and results in correct operation of the headset jack. This is a clone of Duncan's patch for eve at I6f181ec560fe9d34efc023ef6e78e33cb0b4c529 BUG=none BRANCH=none TEST=test on poppy that headset jack detect is read properly at boot, and that plugging in and removing both generate a single interrupt event in the driver. Change-Id: I4aaa4164cb277a98ab5d5f033632f5e16bfb779e Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/18853 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Diffstat (limited to 'src/mainboard')
-rw-r--r--src/mainboard/google/poppy/devicetree.cb2
-rw-r--r--src/mainboard/google/poppy/gpio.h3
2 files changed, 2 insertions, 3 deletions
diff --git a/src/mainboard/google/poppy/devicetree.cb b/src/mainboard/google/poppy/devicetree.cb
index bdf16e6456..fc639677fc 100644
--- a/src/mainboard/google/poppy/devicetree.cb
+++ b/src/mainboard/google/poppy/devicetree.cb
@@ -234,7 +234,7 @@ chip soc/intel/skylake
register "hid" = ""10EC5663""
register "name" = ""RT53""
register "desc" = ""Realtek RT5663""
- register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D9_IRQ)"
+ register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_D9)"
register "probed" = "1"
device i2c 13 on end
end
diff --git a/src/mainboard/google/poppy/gpio.h b/src/mainboard/google/poppy/gpio.h
index e83ff8142c..bd452af68f 100644
--- a/src/mainboard/google/poppy/gpio.h
+++ b/src/mainboard/google/poppy/gpio.h
@@ -129,8 +129,7 @@ static const struct pad_config gpio_table[] = {
NF1), /* ISH_SENSOR */
/* ISH_I2C1_SDA */ PAD_CFG_NC(GPP_D7),
/* ISH_I2C1_SCL */ PAD_CFG_NC(GPP_D8),
-/* ISH_SPI_CS# */ PAD_CFG_GPI_APIC(GPP_D9, NONE,
- PLTRST), /* HP_IRQ_GPIO */
+/* ISH_SPI_CS# */ PAD_CFG_GPI(GPP_D9, NONE, PLTRST), /* HP_IRQ_GPIO */
/* ISH_SPI_CLK */ PAD_CFG_GPO(GPP_D10, 1, DEEP), /* SPKR_RST_L */
/* ISH_SPI_MISO */ PAD_CFG_GPI_APIC(GPP_D11, NONE,
PLTRST), /* SPKR_INT_L */