- Update abuild.sh so it will rebuild successfull builds

- Move pci_set_method out of hardwaremain.c
- Re-add debugging name field but only include the CONFIG_CHIP_NAME is
  enabled.  All instances are now wrapped in CHIP_NAME
- Many minor cleanups so most ports build.


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1737 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 67 insertions, 188 deletions

diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb
index 81b943c285..77e1ec8d05 100644
--- a/src/mainboard/newisys/khepri/Config.lb
+++ b/src/mainboard/newisys/khepri/Config.lb
@@ -1,123 +1,3 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses HARD_RESET_BUS
-uses HARD_RESET_DEVICE
-uses HARD_RESET_FUNCTION
-uses IRQ_SLOT_COUNT
-uses HAVE_OPTION_TABLE
-uses CONFIG_MAX_CPUS
-uses CONFIG_IOAPIC
-uses CONFIG_SMP
-uses FALLBACK_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses USE_OPTION_TABLE
-uses LB_CKS_RANGE_START
-uses LB_CKS_RANGE_END
-uses LB_CKS_LOC
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-
-
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE=524288
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=1
-
-default HARD_RESET_BUS=1
-default HARD_RESET_DEVICE=4
-default HARD_RESET_FUNCTION=0
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=9
-
-##
-## Build code to export an x86 MP table
-## Useful for specifying IRQ routing values
-##
-default HAVE_MP_TABLE=1
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=1
-
-##
-## Move the default LinuxBIOS cmos range off of AMD RTC registers
-##
-default LB_CKS_RANGE_START=49
-default LB_CKS_RANGE_END=122
-default LB_CKS_LOC=123
-
-##
-## Build code for SMP support
-## Only worry about 2 micro processors
-##
-default CONFIG_SMP=1
-default CONFIG_MAX_CPUS=2
-
-##
-## Build code to setup a generic IOAPIC
-##
-default CONFIG_IOAPIC=1
-
-##
-## Clean up the motherboard id strings
-##
-default MAINBOARD_PART_NUMBER="Khepri 2100"
-default MAINBOARD_VENDOR="Newisys"
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-
 ##
 ## Compute the location and size of where this firmware image
 ## (linuxBIOS plus bootloader) will live in the boot rom chip.
@@ -136,7 +16,6 @@ end
 ##
 default PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
 default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-default CONFIG_ROM_STREAM     = 1
 
 ##
 ## Compute where this copy of linuxBIOS will start in the boot rom
@@ -158,7 +37,6 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
 ##
 
 arch i386 end
-#cpu k8 end
 
 ##
 ## Build the objects we have code for in this directory.
@@ -174,42 +52,41 @@ dir /drivers/trident/blade3d
 ## Romcc output
 ##
 makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c" 
-	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+	depends "$(MAINBOARD)/failover.c ./romcc" 
+	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
 end
 
 makerule ./failover.inc
-	depends "./failover.E ./romcc"
-	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+	depends "$(MAINBOARD)/failover.c ./romcc"
+	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
 end
 
 makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c option_table.h"
-	action	"$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+	depends	"$(MAINBOARD)/auto.c option_table.h ./romcc" 
+	action	"./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
 end
 makerule ./auto.inc 
-	depends "./auto.E ./romcc"
-	action	"./romcc -mcpu=k8 -O2 ./auto.E > auto.inc"
+	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	action	"./romcc    -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
 end
 
 ##
 ## Build our 16 bit and 32 bit linuxBIOS entry code
 ##
-mainboardinit cpu/i386/entry16.inc
-mainboardinit cpu/i386/entry32.inc
-mainboardinit cpu/i386/bist32.inc
-ldscript /cpu/i386/entry16.lds
-ldscript /cpu/i386/entry32.lds
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
 
 ##
 ## Build our reset vector (This is where linuxBIOS is entered)
 ##
 if USE_FALLBACK_IMAGE 
-	mainboardinit cpu/i386/reset16.inc 
-	ldscript /cpu/i386/reset16.lds 
+	mainboardinit cpu/x86/16bit/reset16.inc 
+	ldscript /cpu/x86/16bit/reset16.lds 
 else
-	mainboardinit cpu/i386/reset32.inc 
-	ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/x86/32bit/reset32.inc 
+	ldscript /cpu/x86/32bit/reset32.lds 
 end
 
 ### Should this be in the northbridge code?
@@ -221,11 +98,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
 
-##
-## Setup our mtrrs
-##
-mainboardinit cpu/k8/earlymtrr.inc
-
 ###
 ### This is the early phase of linuxBIOS startup 
 ### Things are delicate and we test to see if we should
@@ -243,9 +115,12 @@ end
 ##
 ## Setup RAM
 ##
-mainboardinit cpu/k8/enable_mmx_sse.inc
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit cpu/x86/sse/enable_sse.inc
 mainboardinit ./auto.inc
-mainboardinit cpu/k8/disable_mmx_sse.inc
+mainboardinit cpu/x86/sse/disable_sse.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
 
 ##
 ## Include the secondary Configuration files 
@@ -334,10 +209,3 @@ chip northbridge/amd/amdk8
 	end
 end
 
-##
-## Include the old serial code for those few places that still need it.
-##
-mainboardinit pc80/serial.inc
-mainboardinit arch/i386/lib/console.inc
-mainboardinit cpu/i386/bist32_fail.inc
-
diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c
index 6e6dec743f..1aa151f906 100644
--- a/src/mainboard/newisys/khepri/auto.c
+++ b/src/mainboard/newisys/khepri/auto.c
@@ -1,4 +1,6 @@
 #define ASSEMBLY 1
+#undef MAXIMUM_CONSOLE_LOGLEVEL
+#undef DEFAULT_CONSOLE_LOGLEVEL
 #define MAXIMUM_CONSOLE_LOGLEVEL 9
 #define DEFAULT_CONSOLE_LOGLEVEL 9
 
@@ -7,7 +9,8 @@
 #include <arch/io.h>
 #include <device/pnp_def.h>
 #include <arch/romcc_io.h>
-#include <arch/smp/lapic.h>
+#include <cpu/x86/lapic.h>
+#include <arch/cpu.h>
 #include "option_table.h"
 #include "pc80/mc146818rtc_early.c"
 #include "pc80/serial.c"
@@ -16,13 +19,15 @@
 #include "northbridge/amd/amdk8/incoherent_ht.c"
 #include "southbridge/amd/amd8111/amd8111_early_smbus.c"
 #include "northbridge/amd/amdk8/raminit.h"
-#include "cpu/k8/apic_timer.c"
+#include "cpu/amd/model_fxx/apic_timer.c"
 #include "lib/delay.c"
-#include "cpu/p6/boot_cpu.c"
+#include "cpu/x86/lapic/boot_cpu.c"
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "northbridge/amd/amdk8/debug.c"
 #include "northbridge/amd/amdk8/cpu_rev.c"
 #include "superio/NSC/pc87360/pc87360_early_serial.c"
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
 
 #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
 
@@ -126,14 +131,11 @@ static inline int spd_read_byte(unsigned device, unsigned address)
 
 #include "sdram/generic_sdram.c"
 
-#include "resourcemap.c" /* newisys khepri does not want the default */
+/* newisys khepri does not want the default */
+#include "resourcemap.c"
 
-static void main(void)
+static void main(unsigned long bist)
 {
-	/*
-	 * GPIO28 of 8111 will control H0_MEMRESET_L
-	 * GPIO29 of 8111 will control H1_MEMRESET_L
-	 */
 	static const struct mem_controller cpu[] = {
 		{
 			.node_id = 0,
@@ -154,19 +156,30 @@ static void main(void)
 			.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
 		},
 	};
+
 	int needs_reset;
-	enable_lapic();
-	init_timer();
-	if (cpu_init_detected()) {
-		asm("jmp __cpu_reset");
-	}
-	distinguish_cpu_resets();
-	if (!boot_cpu()) {
-		stop_this_cpu();
+	if (bist == 0) {
+		/* Skip this if there was a built in self test failure */
+		amd_early_mtrr_init();
+		enable_lapic();
+		init_timer();
+		/* Has this cpu already booted? */
+		if (cpu_init_detected()) {
+			asm volatile ("jmp __cpu_reset");
+		}
+		distinguish_cpu_resets();
+		if (!boot_cpu()) {
+			stop_this_cpu();
+		}
 	}
+	/* Setup the console */
 	pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
 	uart_init();
 	console_init();
+
+	/* Halt if there was a built in self test failure */
+	report_bist_failure(bist);
+
 	setup_khepri_resource_map();
 	needs_reset = setup_coherent_ht_domain();
 	needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80);
diff --git a/src/mainboard/newisys/khepri/chip.h b/src/mainboard/newisys/khepri/chip.h
index cb4a806d66..f4889d6a65 100644
--- a/src/mainboard/newisys/khepri/chip.h
+++ b/src/mainboard/newisys/khepri/chip.h
@@ -1,4 +1,4 @@
-extern struct chip_operations mainboard_newisys_khepri_control;
+extern struct chip_operations mainboard_newisys_khepri_ops;
 
 struct mainboard_newisys_khepri_config {
 	int nothing;
diff --git a/src/mainboard/newisys/khepri/mainboard.c b/src/mainboard/newisys/khepri/mainboard.c
index 67ebd9add2..16350b2acf 100644
--- a/src/mainboard/newisys/khepri/mainboard.c
+++ b/src/mainboard/newisys/khepri/mainboard.c
@@ -3,12 +3,9 @@
 #include <device/pci.h>
 #include <device/pci_ids.h>
 #include <device/pci_ops.h>
-
-#include <arch/io.h>
-#include "../../../northbridge/amd/amdk8/northbridge.h"
 #include "chip.h"
 
-struct chip_operations mainboard_newisys_khepri_control = {
-	.name      = "Newisys Khepri mainboard ",
+struct chip_operations mainboard_newisys_khepri_ops = {
+	CHIP_NAME("Newisys Khepri mainboard ")
 };
 
diff --git a/src/mainboard/newisys/khepri/mptable.c b/src/mainboard/newisys/khepri/mptable.c
index 314a04160b..8d7d519654 100644
--- a/src/mainboard/newisys/khepri/mptable.c
+++ b/src/mainboard/newisys/khepri/mptable.c
@@ -4,7 +4,7 @@
 #include <string.h>
 #include <stdint.h>
 
-void *smp_write_config_table(void *v, unsigned long * processor_map)
+void *smp_write_config_table(void *v)
 {
 	static const char sig[4] = "PCMP";
 	static const char oem[8] = "NEWISYS ";
@@ -33,7 +33,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
 	mc->mpe_checksum = 0;
 	mc->reserved = 0;
 
-	smp_write_processors(mc, processor_map);
+	smp_write_processors(mc);
 
 	{
 		device_t dev;
@@ -86,20 +86,22 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
 	smp_write_ioapic(mc, 2, 0x11, 0xfec00000);
 	{
 		device_t dev;
-		uint32_t base;
+		struct resource *res;
 		/* 8131 apic 3 */
 		dev = dev_find_slot(1, PCI_DEVFN(0x01,1));
 		if (dev) {
-			base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
-			base &= PCI_BASE_ADDRESS_MEM_MASK;
-			smp_write_ioapic(mc, 0x03, 0x11, base);
+			res = find_resource(dev, PCI_BASE_ADDRESS_0);
+			if (res) {
+				smp_write_ioapic(mc, 0x03, 0x11, res->base);
+			}
 		}
 		/* 8131 apic 4 */
 		dev = dev_find_slot(1, PCI_DEVFN(0x02,1));
 		if (dev) {
-			base = pci_read_config32(dev, PCI_BASE_ADDRESS_0);
-			base &= PCI_BASE_ADDRESS_MEM_MASK;
-			smp_write_ioapic(mc, 0x04, 0x11, base);
+			res = find_resource(dev, PCI_BASE_ADDRESS_0);
+			if (res) {
+				smp_write_ioapic(mc, 0x04, 0x11, res->base);
+			}
 		}
 	}
 
@@ -216,17 +218,16 @@ void *smp_write_config_table(void *v, unsigned long * processor_map)
 
 	/* Compute the checksums */
 	mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
-
 	mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
 	printk_debug("Wrote the mp table end at: %p - %p\n",
 		mc, smp_next_mpe_entry(mc));
 	return smp_next_mpe_entry(mc);
 }
 
-unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map)
+unsigned long write_smp_table(unsigned long addr)
 {
 	void *v;
 	v = smp_write_floating_table(addr);
-	return (unsigned long)smp_write_config_table(v, processor_map);
+	return (unsigned long)smp_write_config_table(v);
 }