From 018d8dd60f2cc0c82faac0ee2657daa163dd43e7 Mon Sep 17 00:00:00 2001 From: Eric Biederman Date: Thu, 4 Nov 2004 11:04:33 +0000 Subject: - Update abuild.sh so it will rebuild successfull builds - Move pci_set_method out of hardwaremain.c - Re-add debugging name field but only include the CONFIG_CHIP_NAME is enabled. All instances are now wrapped in CHIP_NAME - Many minor cleanups so most ports build. git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1737 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1 --- src/mainboard/newisys/khepri/Config.lb | 174 ++++--------------------------- src/mainboard/newisys/khepri/auto.c | 47 ++++++--- src/mainboard/newisys/khepri/chip.h | 2 +- src/mainboard/newisys/khepri/mainboard.c | 7 +- src/mainboard/newisys/khepri/mptable.c | 25 ++--- 5 files changed, 67 insertions(+), 188 deletions(-) (limited to 'src/mainboard/newisys') diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb index 81b943c285..77e1ec8d05 100644 --- a/src/mainboard/newisys/khepri/Config.lb +++ b/src/mainboard/newisys/khepri/Config.lb @@ -1,123 +1,3 @@ -uses HAVE_MP_TABLE -uses HAVE_PIRQ_TABLE -uses USE_FALLBACK_IMAGE -uses HAVE_FALLBACK_BOOT -uses HAVE_HARD_RESET -uses HARD_RESET_BUS -uses HARD_RESET_DEVICE -uses HARD_RESET_FUNCTION -uses IRQ_SLOT_COUNT -uses HAVE_OPTION_TABLE -uses CONFIG_MAX_CPUS -uses CONFIG_IOAPIC -uses CONFIG_SMP -uses FALLBACK_SIZE -uses ROM_SIZE -uses ROM_SECTION_SIZE -uses ROM_IMAGE_SIZE -uses ROM_SECTION_SIZE -uses ROM_SECTION_OFFSET -uses CONFIG_ROM_STREAM -uses CONFIG_ROM_STREAM_START -uses PAYLOAD_SIZE -uses _ROMBASE -uses XIP_ROM_SIZE -uses XIP_ROM_BASE -uses STACK_SIZE -uses HEAP_SIZE -uses USE_OPTION_TABLE -uses LB_CKS_RANGE_START -uses LB_CKS_RANGE_END -uses LB_CKS_LOC -uses MAINBOARD_PART_NUMBER -uses MAINBOARD_VENDOR - - -## ROM_SIZE is the size of boot ROM that this board will use. -default ROM_SIZE=524288 - -### -### Build options -### - -## -## Build code for the fallback boot -## -default HAVE_FALLBACK_BOOT=1 - -## -## Build code to reset the motherboard from linuxBIOS -## -default HAVE_HARD_RESET=1 - -default HARD_RESET_BUS=1 -default HARD_RESET_DEVICE=4 -default HARD_RESET_FUNCTION=0 - -## -## Build code to export a programmable irq routing table -## -default HAVE_PIRQ_TABLE=1 -default IRQ_SLOT_COUNT=9 - -## -## Build code to export an x86 MP table -## Useful for specifying IRQ routing values -## -default HAVE_MP_TABLE=1 - -## -## Build code to export a CMOS option table -## -default HAVE_OPTION_TABLE=1 - -## -## Move the default LinuxBIOS cmos range off of AMD RTC registers -## -default LB_CKS_RANGE_START=49 -default LB_CKS_RANGE_END=122 -default LB_CKS_LOC=123 - -## -## Build code for SMP support -## Only worry about 2 micro processors -## -default CONFIG_SMP=1 -default CONFIG_MAX_CPUS=2 - -## -## Build code to setup a generic IOAPIC -## -default CONFIG_IOAPIC=1 - -## -## Clean up the motherboard id strings -## -default MAINBOARD_PART_NUMBER="Khepri 2100" -default MAINBOARD_VENDOR="Newisys" - -### -### LinuxBIOS layout values -### - -## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy. -default ROM_IMAGE_SIZE = 65536 - -## -## Use a small 8K stack -## -default STACK_SIZE=0x2000 - -## -## Use a small 16K heap -## -default HEAP_SIZE=0x4000 - -## -## Only use the option table in a normal image -## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE - ## ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. @@ -136,7 +16,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -158,7 +37,6 @@ default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) ## arch i386 end -#cpu k8 end ## ## Build the objects we have code for in this directory. @@ -174,42 +52,41 @@ dir /drivers/trident/blade3d ## Romcc output ## makerule ./failover.E - depends "$(MAINBOARD)/failover.c" - action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./failover.inc - depends "./failover.E ./romcc" - action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E" + depends "$(MAINBOARD)/failover.c ./romcc" + action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@" end makerule ./auto.E - depends "$(MAINBOARD)/auto.c option_table.h" - action "$(CPP) -I$(TOP)/src -I. $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end makerule ./auto.inc - depends "./auto.E ./romcc" - action "./romcc -mcpu=k8 -O2 ./auto.E > auto.inc" + depends "$(MAINBOARD)/auto.c option_table.h ./romcc" + action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@" end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -mainboardinit cpu/i386/entry16.inc -mainboardinit cpu/i386/entry32.inc -mainboardinit cpu/i386/bist32.inc -ldscript /cpu/i386/entry16.lds -ldscript /cpu/i386/entry32.lds +mainboardinit cpu/x86/16bit/entry16.inc +mainboardinit cpu/x86/32bit/entry32.inc +ldscript /cpu/x86/16bit/entry16.lds +ldscript /cpu/x86/32bit/entry32.lds ## ## Build our reset vector (This is where linuxBIOS is entered) ## if USE_FALLBACK_IMAGE - mainboardinit cpu/i386/reset16.inc - ldscript /cpu/i386/reset16.lds + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds else - mainboardinit cpu/i386/reset32.inc - ldscript /cpu/i386/reset32.lds + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds end ### Should this be in the northbridge code? @@ -221,11 +98,6 @@ mainboardinit arch/i386/lib/cpu_reset.inc mainboardinit arch/i386/lib/id.inc ldscript /arch/i386/lib/id.lds -## -## Setup our mtrrs -## -mainboardinit cpu/k8/earlymtrr.inc - ### ### This is the early phase of linuxBIOS startup ### Things are delicate and we test to see if we should @@ -243,9 +115,12 @@ end ## ## Setup RAM ## -mainboardinit cpu/k8/enable_mmx_sse.inc +mainboardinit cpu/x86/fpu/enable_fpu.inc +mainboardinit cpu/x86/mmx/enable_mmx.inc +mainboardinit cpu/x86/sse/enable_sse.inc mainboardinit ./auto.inc -mainboardinit cpu/k8/disable_mmx_sse.inc +mainboardinit cpu/x86/sse/disable_sse.inc +mainboardinit cpu/x86/mmx/disable_mmx.inc ## ## Include the secondary Configuration files @@ -334,10 +209,3 @@ chip northbridge/amd/amdk8 end end -## -## Include the old serial code for those few places that still need it. -## -mainboardinit pc80/serial.inc -mainboardinit arch/i386/lib/console.inc -mainboardinit cpu/i386/bist32_fail.inc - diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c index 6e6dec743f..1aa151f906 100644 --- a/src/mainboard/newisys/khepri/auto.c +++ b/src/mainboard/newisys/khepri/auto.c @@ -1,4 +1,6 @@ #define ASSEMBLY 1 +#undef MAXIMUM_CONSOLE_LOGLEVEL +#undef DEFAULT_CONSOLE_LOGLEVEL #define MAXIMUM_CONSOLE_LOGLEVEL 9 #define DEFAULT_CONSOLE_LOGLEVEL 9 @@ -7,7 +9,8 @@ #include #include #include -#include +#include +#include #include "option_table.h" #include "pc80/mc146818rtc_early.c" #include "pc80/serial.c" @@ -16,13 +19,15 @@ #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" -#include "cpu/k8/apic_timer.c" +#include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#include "cpu/p6/boot_cpu.c" +#include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/NSC/pc87360/pc87360_early_serial.c" +#include "cpu/amd/mtrr/amd_earlymtrr.c" +#include "cpu/x86/bist.h" #define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1) @@ -126,14 +131,11 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "sdram/generic_sdram.c" -#include "resourcemap.c" /* newisys khepri does not want the default */ +/* newisys khepri does not want the default */ +#include "resourcemap.c" -static void main(void) +static void main(unsigned long bist) { - /* - * GPIO28 of 8111 will control H0_MEMRESET_L - * GPIO29 of 8111 will control H1_MEMRESET_L - */ static const struct mem_controller cpu[] = { { .node_id = 0, @@ -154,19 +156,30 @@ static void main(void) .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, }, }; + int needs_reset; - enable_lapic(); - init_timer(); - if (cpu_init_detected()) { - asm("jmp __cpu_reset"); - } - distinguish_cpu_resets(); - if (!boot_cpu()) { - stop_this_cpu(); + if (bist == 0) { + /* Skip this if there was a built in self test failure */ + amd_early_mtrr_init(); + enable_lapic(); + init_timer(); + /* Has this cpu already booted? */ + if (cpu_init_detected()) { + asm volatile ("jmp __cpu_reset"); + } + distinguish_cpu_resets(); + if (!boot_cpu()) { + stop_this_cpu(); + } } + /* Setup the console */ pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); + setup_khepri_resource_map(); needs_reset = setup_coherent_ht_domain(); needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0x80); diff --git a/src/mainboard/newisys/khepri/chip.h b/src/mainboard/newisys/khepri/chip.h index cb4a806d66..f4889d6a65 100644 --- a/src/mainboard/newisys/khepri/chip.h +++ b/src/mainboard/newisys/khepri/chip.h @@ -1,4 +1,4 @@ -extern struct chip_operations mainboard_newisys_khepri_control; +extern struct chip_operations mainboard_newisys_khepri_ops; struct mainboard_newisys_khepri_config { int nothing; diff --git a/src/mainboard/newisys/khepri/mainboard.c b/src/mainboard/newisys/khepri/mainboard.c index 67ebd9add2..16350b2acf 100644 --- a/src/mainboard/newisys/khepri/mainboard.c +++ b/src/mainboard/newisys/khepri/mainboard.c @@ -3,12 +3,9 @@ #include #include #include - -#include -#include "../../../northbridge/amd/amdk8/northbridge.h" #include "chip.h" -struct chip_operations mainboard_newisys_khepri_control = { - .name = "Newisys Khepri mainboard ", +struct chip_operations mainboard_newisys_khepri_ops = { + CHIP_NAME("Newisys Khepri mainboard ") }; diff --git a/src/mainboard/newisys/khepri/mptable.c b/src/mainboard/newisys/khepri/mptable.c index 314a04160b..8d7d519654 100644 --- a/src/mainboard/newisys/khepri/mptable.c +++ b/src/mainboard/newisys/khepri/mptable.c @@ -4,7 +4,7 @@ #include #include -void *smp_write_config_table(void *v, unsigned long * processor_map) +void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; static const char oem[8] = "NEWISYS "; @@ -33,7 +33,7 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) mc->mpe_checksum = 0; mc->reserved = 0; - smp_write_processors(mc, processor_map); + smp_write_processors(mc); { device_t dev; @@ -86,20 +86,22 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) smp_write_ioapic(mc, 2, 0x11, 0xfec00000); { device_t dev; - uint32_t base; + struct resource *res; /* 8131 apic 3 */ dev = dev_find_slot(1, PCI_DEVFN(0x01,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x03, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x03, 0x11, res->base); + } } /* 8131 apic 4 */ dev = dev_find_slot(1, PCI_DEVFN(0x02,1)); if (dev) { - base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - base &= PCI_BASE_ADDRESS_MEM_MASK; - smp_write_ioapic(mc, 0x04, 0x11, base); + res = find_resource(dev, PCI_BASE_ADDRESS_0); + if (res) { + smp_write_ioapic(mc, 0x04, 0x11, res->base); + } } } @@ -216,17 +218,16 @@ void *smp_write_config_table(void *v, unsigned long * processor_map) /* Compute the checksums */ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); - mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); printk_debug("Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); return smp_next_mpe_entry(mc); } -unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map) +unsigned long write_smp_table(unsigned long addr) { void *v; v = smp_write_floating_table(addr); - return (unsigned long)smp_write_config_table(v, processor_map); + return (unsigned long)smp_write_config_table(v); } -- cgit v1.2.3