mb/intel/ehlcrb: Remove IPU & MIPI related support from EHL CRB

THis patch removes IPU & MIPI related support from EHL CRB as they
are not supported in EHL.

Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I3eb038009daaabd048f40c7953cb2c111cd4fe63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>

1 files changed, 2 insertions, 109 deletions

diff --git a/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb
index af0c7530f7..2c3a4776cc 100644
--- a/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb
+++ b/src/mainboard/intel/elkhartlake_crb/variants/ehlcrb/devicetree.cb
@@ -28,21 +28,6 @@ chip soc/intel/elkhartlake
 			end
 		end # SA Thermal device
 
-		device pci 05.0 on
-			chip drivers/intel/mipi_camera
-				register "acpi_uid" = "0x50000"
-				register "acpi_name" = ""IPU0""
-				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
-
-				register "cio2_num_ports" = "2"
-				register "cio2_lanes_used" = "{2,2}"
-				register "cio2_lane_endpoint[0]" = ""^I2C4.CAM0""
-				register "cio2_lane_endpoint[1]" = ""^I2C5.CAM1""
-				register "cio2_prt[0]" = "0"
-				register "cio2_prt[1]" = "2"
-				device generic 0 on end
-			end
-		end
 		device pci 12.0 off end # Thermal Subsystem
 		device pci 12.5 off end # UFS SCS
 		device pci 12.6 off end # GSPI #2
@@ -178,100 +163,8 @@ chip soc/intel/elkhartlake
 		device pci 16.4 off end # Management Engine Interface 3
 		device pci 16.5 off end # Management Engine Interface 4
 		device pci 17.0 off end # SATA
-		device pci 19.0 on # I2C #4 Cam 0
-			chip drivers/intel/mipi_camera
-				register "acpi_hid" = ""OVTI2740""
-				register "acpi_uid" = "0"
-				register "acpi_name" = ""CAM0""
-				register "chip_name" = ""Ov 2740 Camera""
-				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
-				register "has_power_resource" = "1"
-
-				register "ssdb.lanes_used" = "2"
-				register "num_freq_entries" = "1"
-				register "link_freq[0]" = "360000000"
-				register "remote_name" = ""IPU0""
-
-				#Controls
-				register "clk_panel.clks[0].clknum" = "0" #IMGCLKOUT_3
-				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
-
-				register "gpio_panel.gpio[0].gpio_num" = "GPP_D5" #reset
-				register "gpio_panel.gpio[1].gpio_num" = "GPP_B14" #power
-
-				#_ON
-				register "on_seq.ops_cnt" = "4"
-				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
-				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
-				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)"
-				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
-
-				#_OFF
-				register "off_seq.ops_cnt" = "3"
-				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
-				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
-				register "off_seq.ops[2]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
-
-				device i2c 10 on end
-			end
-		end
-		device pci 19.1 on # I2C #5 Cam 1 and VCM
-			chip drivers/intel/mipi_camera
-				register "acpi_hid" = ""OVTI5675""
-				register "acpi_uid" = "0"
-				register "acpi_name" = ""CAM1""
-				register "chip_name" = ""Ov 5675 Camera""
-				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
-
-				register "ssdb.lanes_used" = "2"
-				register "ssdb.link_used" = "1"
-				register "ssdb.vcm_type" = "0x0C"
-				register "vcm_name" = ""VCM0""
-				register "num_freq_entries" = "1"
-				register "link_freq[0]" = "DEFAULT_LINK_FREQ"
-				register "remote_name" = ""IPU0""
-
-				register "has_power_resource" = "1"
-				#Controls
-				register "clk_panel.clks[0].clknum" = "1" #IMGCLKOUT_3
-				register "clk_panel.clks[0].freq" = "1" #19.2 Mhz
-
-				register "gpio_panel.gpio[0].gpio_num" = "GPP_D4" #power_enable
-				register "gpio_panel.gpio[1].gpio_num" = "GPP_C19" #reset
-
-				#_ON
-				register "on_seq.ops_cnt" = "4"
-				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
-				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
-				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 5)"
-				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
-
-				#_OFF
-				register "off_seq.ops_cnt" = "3"
-				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
-				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
-				register "off_seq.ops[2]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
-
-				device i2c 36 on end
-			end
-			chip drivers/intel/mipi_camera
-				register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
-				register "acpi_uid" = "3"
-				register "acpi_name" = ""VCM0""
-				register "chip_name" = ""DW AF DAC""
-				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
-
-				register "pr0" = ""\\_SB.PCI0.I2C5.CAM1.PRIC""
-				register "vcm_compat" = ""dongwoon,dw9714""
-
-				register "ssdb.lanes_used" = "2"
-				register "num_freq_entries" = "1"
-				register "link_freq[0]" = "DEFAULT_LINK_FREQ"
-				register "remote_name" = ""IPU0""
-				device i2c 0C on end
-			end
-		end
-
+		device pci 19.0 on end # I2C #4
+		device pci 19.1 on end # I2C #5
 		device pci 19.2 on  end # UART #2
 		device pci 1a.0 on  end # eMMC
 		device pci 1c.0 off end # PCI Express Port 1