brya: add various ES variants

Fork multiple "4ES" variants off some brya devices to
properly support ES SoC.

BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts

Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ic9516fec591429238bde1478eca2522d8ed10127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>

1 files changed, 523 insertions, 0 deletions

diff --git a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb
new file mode 100644
index 0000000000..67cb7f3b74
--- /dev/null
+++ b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb
@@ -0,0 +1,523 @@
+fw_config
+	field DB_SD 0 1
+		option SD_ABSENT		0
+		option SD_GL9755S		1
+	end
+	field KB_BL 2 2
+		option KB_BL_ABSENT		0
+		option KB_BL_PRESENT		1
+	end
+	field AUDIO 3 5
+		option AUDIO_UNKNOWN			0
+		option MAX98390_ALC5682I_I2S_4SPK	1
+	end
+	field DB_LTE 6 7
+		option LTE_ABSENT		0
+		option LTE_USB			1
+		option LTE_PCIE			2
+	end
+	field EPS 10 10
+		option PRIVACY_SCREEN_ABSENT	0
+		option PRIVACY_SCREEN		1
+	end
+	field CAMERA_UFC 38 39
+		option CAMERA_NONE		0
+		option CAMERA_OV5675		1
+		option CAMERA_HI556		2
+	end
+	field TP_SOURCE 40 41
+		option ELAN0000			0
+		option ELAN2703			1
+	end
+end
+chip soc/intel/alderlake
+	# This disables autonomous GPIO power management, otherwise
+	# old cr50 FW only supports short pulses; need to clarify
+	# the minimum PCH IRQ pulse width with Intel, b/180111628
+	register "gpio_override_pm" = "1"
+	register "gpio_pm[COMM_0]" = "0"
+	register "gpio_pm[COMM_1]" = "0"
+	register "gpio_pm[COMM_2]" = "0"
+	register "gpio_pm[COMM_3]" = "0"
+	register "gpio_pm[COMM_4]" = "0"
+	register "gpio_pm[COMM_5]" = "0"
+	register "SaGv" = "SaGv_Enabled"
+	register "CnviBtAudioOffload" = "true"
+	# FIVR RFI Spread Spectrum 6%
+	register "FivrSpreadSpectrum" = "FIVR_SS_6"
+
+	# Acoustic settings
+	register "AcousticNoiseMitigation" = "1"
+	register "SlowSlewRate[VR_DOMAIN_IA]" = "SLEW_FAST_8"
+	register "FastPkgCRampDisable[VR_DOMAIN_IA]" = "1"
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| GSPI1             | Fingerprint MCU           |
+	#| I2C0              | Audio                     |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              |                           |
+	#| I2C3              | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[3] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+		},
+	}"
+	device domain 0 on
+		device ref igpu on
+			chip drivers/gfx/generic
+				register "device_count" = "1"
+				register "device[0].name" = ""LCD""
+				# Internal panel on the first port of the graphics chip
+				register "device[0].addr" = "0x80010400"
+				register "device[0].privacy.enabled" = "1"
+				register "device[0].privacy.gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H21)"
+				device generic 0 on
+					probe EPS PRIVACY_SCREEN
+				end
+			end
+		end # Integrated Graphics Device
+		device ref dtt on
+			chip drivers/intel/dptf
+				## sensor information
+				register "options.tsr[0].desc" = ""DRAM""
+				register "options.tsr[1].desc" = ""SOC""
+				register "options.tsr[2].desc" = ""Charger""
+				register "options.tsr[3].desc" = ""5V regulator""
+
+				# TODO: below values are initial reference values only
+				## Passive Policy
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU,         CPU,           55, 5000),
+					[1] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_0, 45, 5000),
+					[2] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_1, 51, 5000),
+					[3] = DPTF_PASSIVE(CHARGER,     TEMP_SENSOR_2, 51, 5000),
+					[4] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_3, 51, 5000),
+				}"
+				register "controls.power_limits" = "{
+					.pl1 = {
+							.min_power = 13000,
+							.max_power = 15000,
+							.time_window_min = 42 * MSECS_PER_SEC,
+							.time_window_max = 42 * MSECS_PER_SEC,
+							.granularity = 200,
+						},
+					.pl2 = {
+							.min_power = 35000,
+							.max_power = 35000,
+							.time_window_min = 42 * MSECS_PER_SEC,
+							.time_window_max = 42 * MSECS_PER_SEC,
+							.granularity = 1000,
+						}
+				}"
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf" = "{
+					[0] = { 255, 1700 },
+					[1] = {  24, 1500 },
+					[2] = {  16, 1000 },
+					[3] = {   8,  500 }
+				}"
+				device generic 0 alias dptf_policy on end
+			end
+		end
+		device ref ipu on
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "0x50000"
+				register "acpi_name" = ""IPU0""
+				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
+
+				register "cio2_num_ports" = "1"
+				register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
+				register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
+				register "cio2_prt[0]" = "2"
+				device generic 0 on end
+			end
+		end
+		device ref cnvi_wifi on
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_PME_B0"
+				device generic 0 on end
+			end
+		end
+		device ref pcie_rp6 on
+			probe DB_LTE LTE_PCIE
+		end
+		device ref tcss_dma0 on
+			chip drivers/intel/usb4/retimer
+				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
+				use tcss_usb3_port1 as dfp[0].typec_port
+				device generic 0 on end
+			end
+		end
+		device ref tcss_dma1 on
+			chip drivers/intel/usb4/retimer
+				register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
+				use tcss_usb3_port3 as dfp[0].typec_port
+				device generic 0 on end
+			end
+		end
+		device ref pcie_rp8 on
+			chip soc/intel/common/block/pcie/rtd3
+				register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
+				register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
+				register "srcclk_pin" = "3"
+				device generic 0 on end
+			end
+		end	#PCIE8 SD card
+		device ref i2c0 on
+			chip drivers/i2c/generic
+				register "hid" = ""RTL5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on
+					probe AUDIO MAX98390_ALC5682I_I2S_4SPK
+				end
+			end
+			chip drivers/i2c/max98390
+				register "desc" = ""MAX98390 Speaker Amp 0""
+				register "uid" = "0"
+				register "name" = ""MXW0""
+				register "r0_calib_key" = ""dsm_calib_r0_0""
+				register "temperature_calib_key" = ""dsm_calib_temp_0""
+				register "dsm_param_file_name" = ""dsm_param_R""
+				register "vmon_slot_no" = "0"
+				register "imon_slot_no" = "1"
+				device i2c 0x3a on
+					probe AUDIO MAX98390_ALC5682I_I2S_4SPK
+				end
+			end
+			chip drivers/i2c/max98390
+				register "desc" = ""MAX98390 Speaker Amp 1""
+				register "uid" = "1"
+				register "name" = ""MXW1""
+				register "r0_calib_key" = ""dsm_calib_r0_1""
+				register "temperature_calib_key" = ""dsm_calib_temp_1""
+				register "dsm_param_file_name" = ""dsm_param_L""
+				register "vmon_slot_no" = "1"
+				register "imon_slot_no" = "0"
+				device i2c 0x3b on
+					probe AUDIO MAX98390_ALC5682I_I2S_4SPK
+				end
+			end
+			chip drivers/i2c/max98390
+				register "desc" = ""MAX98390 Speaker Amp 2""
+				register "uid" = "2"
+				register "name" = ""MXW2""
+				register "r0_calib_key" = ""dsm_calib_r0_2""
+				register "temperature_calib_key" = ""dsm_calib_temp_2""
+				register "dsm_param_file_name" = ""dsm_param_tt_R""
+				register "vmon_slot_no" = "2"
+				register "imon_slot_no" = "3"
+				device i2c 0x38 on
+					probe AUDIO MAX98390_ALC5682I_I2S_4SPK
+				end
+			end
+			chip drivers/i2c/max98390
+				register "desc" = ""MAX98390 Speaker Amp 3""
+				register "uid" = "3"
+				register "name" = ""MXW3""
+				register "r0_calib_key" = ""dsm_calib_r0_3""
+				register "temperature_calib_key" = ""dsm_calib_temp_3""
+				register "dsm_param_file_name" = ""dsm_param_tt_L""
+				register "vmon_slot_no" = "3"
+				register "imon_slot_no" = "2"
+				device i2c 0x39 on
+					probe AUDIO MAX98390_ALC5682I_I2S_4SPK
+				end
+			end
+		end #I2C0
+		device ref i2c1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN2513""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "generic.reset_delay_ms" = "300"
+				register "generic.reset_off_delay_ms" = "1"
+				register "generic.enable_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "generic.enable_delay_ms" = "6"
+				register "generic.stop_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+				register "generic.stop_off_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 0x15 on end
+			end
+		end
+		device ref i2c2 on
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = ""OVTI5675""
+				register "acpi_uid" = "0"
+				register "acpi_name" = ""CAM0""
+				register "chip_name" = ""Ov 5675 Camera""
+				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+
+				register "ssdb.lanes_used" = "2"
+				register "ssdb.link_used" = "1"
+				register "num_freq_entries" = "1"
+				register "link_freq[0]" = "DEFAULT_LINK_FREQ"
+				register "remote_name" = ""IPU0""
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
+
+				register "has_power_resource" = "1"
+				#Controls
+				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
+				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
+
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  #EN_UCAM_LED_PWR
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #EN_UCAM_PWR
+				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset
+
+				#_ON
+				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "4"
+				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+				device i2c 36 on
+					probe CAMERA_UFC CAMERA_NONE
+					probe CAMERA_UFC CAMERA_OV5675
+				end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = ""INT3537""
+				register "acpi_uid" = "0"
+				register "acpi_name" = ""CAM0""
+				register "chip_name" = ""Hi-556 Camera""
+				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD"
+
+				register "ssdb.lanes_used" = "2"
+				register "ssdb.link_used" = "1"
+				register "num_freq_entries" = "1"
+				register "link_freq[0]" = "437000000"
+				register "remote_name" = ""IPU0""
+
+				register "has_power_resource" = "1"
+				#Controls
+				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
+				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
+
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  #EN_UCAM_LED_PWR
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #EN_UCAM_PWR
+				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset
+
+				#_ON
+				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "4"
+				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+				device i2c 20 on
+					probe CAMERA_UFC CAMERA_HI556
+				end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
+				register "acpi_uid" = "1"
+				register "acpi_name" = ""NVM0""
+				register "chip_name" = ""M24C64X""
+				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+				register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0"
+
+				register "has_power_resource" = "1"
+				#Controls
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_UCAM_PWR
+
+				#_ON
+				register "on_seq.ops_cnt" = "1"
+				register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "1"
+				register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+				register "nvm_size" = "0x2000"
+				register "nvm_pagesize" = "1"
+				register "nvm_readonly" = "1"
+				register "nvm_width" = "0x10"
+				register "nvm_compat" = ""atmel,24c64""
+				device i2c 50 on end
+			end
+
+		end
+		device ref i2c3 on
+			chip drivers/i2c/tpm
+				register "hid" = ""GOOG0005""
+				register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
+				device i2c 50 on end
+			end
+		end
+		device ref i2c5 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "wake" = "GPE0_DW2_14"
+				register "probed" = "1"
+				device i2c 15 on
+					probe TP_SOURCE ELAN0000
+				end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN2703""
+				register "generic.desc" = ""ELAN Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "generic.wake" = "GPE0_DW2_14"
+				register "generic.probed" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 15 on
+					probe TP_SOURCE ELAN2703
+				end
+			end
+		end
+		device ref gspi1 on
+			chip drivers/spi/acpi
+				register "name" = ""CRFP""
+				register "hid" = "ACPI_DT_NAMESPACE_HID"
+				register "uid" = "1"
+				register "compat_string" = ""google,cros-ec-spi""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)"
+				register "wake" = "GPE0_DW2_15"
+				device spi 0 on end
+			end # FPMCU
+		end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "1"
+						register "usb3_port_number" = "1"
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "3"
+						register "usb3_port_number" = "3"
+						device generic 1 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref tcss_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C2 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref tcss_usb3_port3 on end
+					end
+				end
+			end
+		end
+		device ref xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(1, 1)"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C2 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "group" = "ACPI_PLD_GROUP(3, 1)"
+						device ref usb2_port3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Camera""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						device ref usb2_port9 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+						device ref usb2_port10 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+						register "group" = "ACPI_PLD_GROUP(4, 1)"
+						device ref usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb3_port4 on end
+					end
+				end
+			end
+		end
+	end
+end