diff options
| author | YH Lin <yueherngl@google.com> | 2021-11-29 09:44:01 -0800 |
|---|---|---|
| committer | Tim Wawrzynczak <twawrzynczak@chromium.org> | 2021-11-30 17:11:56 +0000 |
| commit | 6ba7bee1aae390fbdef9063ac766665250f1d24a (patch) | |
| tree | 1c199129d4e0761e37d9759bba1cdee0af02b0f5 /src/mainboard/google/brya/variants/redrix4es | |
| parent | 5c59fefd8936ce64e114bc32348053038d669692 (diff) | |
brya: add various ES variants
Fork multiple "4ES" variants off some brya devices to
properly support ES SoC.
BRANCH=none
BUG=b:201767461
TEST=emerge-brya coreboot and check the artifacts
Signed-off-by: YH Lin <yueherngl@google.com>
Change-Id: Ic9516fec591429238bde1478eca2522d8ed10127
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Diffstat (limited to 'src/mainboard/google/brya/variants/redrix4es')
10 files changed, 822 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/redrix4es/Makefile.inc b/src/mainboard/google/brya/variants/redrix4es/Makefile.inc new file mode 100644 index 0000000000..446d113a80 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/Makefile.inc @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0-only +bootblock-y += gpio.c + +romstage-y += gpio.c + +ramstage-y += gpio.c + +ramstage-$(CONFIG_FW_CONFIG) += fw_config.c + +ramstage-y += variant.c diff --git a/src/mainboard/google/brya/variants/redrix4es/fw_config.c b/src/mainboard/google/brya/variants/redrix4es/fw_config.c new file mode 100644 index 0000000000..ac31d99c44 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/fw_config.c @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <bootstate.h> +#include <console/console.h> +#include <fw_config.h> +#include <gpio.h> + +static const struct pad_config dmic_enable_pads[] = { + PAD_CFG_NF(GPP_R4, NONE, DEEP, NF3), /* DMIC_CLK0_R */ + PAD_CFG_NF(GPP_R5, NONE, DEEP, NF3), /* DMIC_DATA0_R */ + +}; + +static const struct pad_config dmic_disable_pads[] = { + PAD_NC(GPP_R4, NONE), + PAD_NC(GPP_R5, NONE), +}; + +static const struct pad_config i2s_enable_pads[] = { + PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2), /* I2S_HP_SCLK_R */ + PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2), /* I2S_HP_SFRM_R */ + PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2), /* I2S_PCH_TX_HP_RX_STRAP */ + PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2), /* I2S_PCH_RX_HP_TX */ + PAD_CFG_NF(GPP_S0, NONE, DEEP, NF4), /* I2S_SPKR_SCLK_R */ + PAD_CFG_NF(GPP_S1, NONE, DEEP, NF4), /* I2S_SPKR_SFRM_R */ + PAD_CFG_NF(GPP_S2, NONE, DEEP, NF4), /* I2S_PCH_TX_SPKR_RX_R */ + PAD_CFG_NF(GPP_S3, NONE, DEEP, NF4), /* I2S_PCH_RX_SPKR_TX */ +}; + +static const struct pad_config i2s_disable_pads[] = { + PAD_NC(GPP_R0, NONE), + PAD_NC(GPP_R1, NONE), + PAD_NC(GPP_R2, NONE), + PAD_NC(GPP_R3, NONE), + PAD_NC(GPP_S0, NONE), + PAD_NC(GPP_S1, NONE), + PAD_NC(GPP_S2, NONE), + PAD_NC(GPP_S3, NONE), +}; + +static const struct pad_config bt_i2s_enable_pads[] = { + PAD_CFG_NF(GPP_VGPIO_30, NONE, DEEP, NF3), /* BT_I2S_BCLK */ + PAD_CFG_NF(GPP_VGPIO_31, NONE, DEEP, NF3), /* BT_I2S_SYNC */ + PAD_CFG_NF(GPP_VGPIO_32, NONE, DEEP, NF3), /* BT_I2S_SDO */ + PAD_CFG_NF(GPP_VGPIO_33, NONE, DEEP, NF3), /* BT_I2S_SDI */ + PAD_CFG_NF(GPP_VGPIO_34, NONE, DEEP, NF1), /* SSP2_SCLK */ + PAD_CFG_NF(GPP_VGPIO_35, NONE, DEEP, NF1), /* SSP2_SFRM */ + PAD_CFG_NF(GPP_VGPIO_36, NONE, DEEP, NF1), /* SSP_TXD */ + PAD_CFG_NF(GPP_VGPIO_37, NONE, DEEP, NF1), /* SSP_RXD */ +}; + +static void fw_config_handle(void *unused) +{ + if (!fw_config_is_provisioned() || fw_config_probe(FW_CONFIG(AUDIO, AUDIO_UNKNOWN))) { + printk(BIOS_INFO, "Disable audio related GPIO pins.\n"); + gpio_configure_pads(i2s_disable_pads, ARRAY_SIZE(i2s_disable_pads)); + gpio_configure_pads(dmic_disable_pads, ARRAY_SIZE(dmic_disable_pads)); + return; + } + + if (fw_config_probe(FW_CONFIG(AUDIO, MAX98390_ALC5682I_I2S_4SPK))) { + printk(BIOS_INFO, "Configure audio over I2S with MAX98390 ALC5682I.\n"); + gpio_configure_pads(dmic_enable_pads, ARRAY_SIZE(dmic_enable_pads)); + gpio_configure_pads(i2s_enable_pads, ARRAY_SIZE(i2s_enable_pads)); + printk(BIOS_INFO, "BT offload enabled\n"); + gpio_configure_pads(bt_i2s_enable_pads, ARRAY_SIZE(bt_i2s_enable_pads)); + } +} +BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, fw_config_handle, NULL); diff --git a/src/mainboard/google/brya/variants/redrix4es/gpio.c b/src/mainboard/google/brya/variants/redrix4es/gpio.c new file mode 100644 index 0000000000..afcb7e9114 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/gpio.c @@ -0,0 +1,150 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#include <baseboard/gpio.h> +#include <baseboard/variants.h> +#include <commonlib/helpers.h> +#include <soc/gpio.h> + +/* Pad configuration in ramstage */ +static const struct pad_config override_gpio_table[] = { + /* A17 : DISP_MISCC ==> NC */ + PAD_NC(GPP_A17, NONE), + /* A19 : DDSP_HPD1 ==> NC */ + PAD_NC(GPP_A19, NONE), + /* A20 : DDSP_HPD2 ==> NC */ + PAD_NC(GPP_A20, NONE), + /* A21 : DDPC_CTRCLK ==> NC */ + PAD_NC(GPP_A21, NONE), + /* A22 : DDPC_CTRLDATA ==> NC */ + PAD_NC(GPP_A22, NONE), + + /* B3 : PROC_GP2 ==> NC */ + PAD_NC(GPP_B3, NONE), + /* B15 : TIME_SYNC0 ==> NC */ + PAD_NC(GPP_B15, NONE), + + /* C3 : SML0CLK ==> NC */ + PAD_NC(GPP_C3, NONE), + /* C4 : SML0DATA ==> NC */ + PAD_NC(GPP_C4, NONE), + + /* D7 : SRCCLKREQ2# ==> NC */ + PAD_NC(GPP_D7, NONE), + /* D13 : ISH_UART0_RXD ==> NC */ + PAD_NC(GPP_D13, NONE), + + /* E3 : PROC_GP0 ==> NC */ + PAD_NC(GPP_E3, NONE), + /* E7 : PROC_GP1 ==> NC */ + PAD_NC(GPP_E7, NONE), + /* E16 : RSVD_TP ==> WWAN_RST_L */ + PAD_CFG_GPO(GPP_E16, 1, DEEP), + /* E20 : DDP2_CTRLCLK ==> NC */ + PAD_NC(GPP_E20, NONE), + /* E22 : DDPA_CTRLCLK ==> NC */ + PAD_NC(GPP_E22, NONE), + /* E23 : DDPA_CTRLDATA ==> NC */ + PAD_NC(GPP_E23, NONE), + /* F20 : EXT_PWR_GATE# ==> NC */ + PAD_NC(GPP_F20, NONE), + + /* H3 : SX_EXIT_HOLDOFF# ==> NC */ + PAD_NC(GPP_H3, NONE), + /* H20 : IMGCLKOUT1 ==> NC */ + PAD_NC(GPP_H20, NONE), + /* H21 : IMGCLKOUT2 ==> Privacy screen */ + PAD_CFG_GPO(GPP_H21, 0, DEEP), + + /* R6 : I2S_PCH_TX_SPKR_RX ==> NC */ + PAD_NC(GPP_R6, NONE), + /* R7 : I2S_PCH_RX_SPKR_TX ==> NC */ + PAD_NC(GPP_R7, NONE), + + /* S4 : SNDW2_CLK ==> NC */ + PAD_NC(GPP_S4, NONE), + /* S5 : SNDW2_DATA ==> NC */ + PAD_NC(GPP_S5, NONE), + /* S6 : SNDW3_CLK ==> NC */ + PAD_NC(GPP_S6, NONE), + /* S7 : SNDW3_DATA ==> NC */ + PAD_NC(GPP_S7, NONE), + /* + * E0 : SATAXPCIE0 ==> WWAN_PERST_L + * Drive high here, so that PERST_L is sequenced after RST_L + */ + PAD_CFG_GPO(GPP_E0, 1, DEEP), +}; + +/* Early pad configuration in bootblock */ +static const struct pad_config early_gpio_table[] = { + /* A12 : SATAXPCIE1 ==> EN_PP3300_WWAN */ + PAD_CFG_GPO(GPP_A12, 1, DEEP), + /* A13 : PMC_I2C_SCL ==> GSC_PCH_INT_ODL */ + PAD_CFG_GPI_APIC(GPP_A13, NONE, PLTRST, LEVEL, INVERT), + /* B7 : ISH_12C1_SDA ==> PCH_I2C_TPM_SDA */ + PAD_CFG_NF(GPP_B7, NONE, DEEP, NF2), + /* B8 : ISH_12C1_SCL ==> PCH_I2C_TPM_SCL */ + PAD_CFG_NF(GPP_B8, NONE, DEEP, NF2), + /* + * D1 : ISH_GP1 ==> FP_RST_ODL + * FP_RST_ODL comes out of reset as hi-z and does not have an external pull-down. + * To ensure proper power sequencing for the FPMCU device, reset signal is driven low + * early on in bootblock, followed by enabling of power. Reset signal is deasserted + * later on in ramstage. Since reset signal is asserted in bootblock, it results in + * FPMCU not working after a S3 resume. This is a known issue. + */ + PAD_CFG_GPO(GPP_D1, 0, DEEP), + /* D2 : ISH_GP2 ==> EN_FP_PWR */ + PAD_CFG_GPO(GPP_D2, 1, DEEP), + /* D11 : ISH_SPI_MISO ==> EN_PP3300_SSD */ + PAD_CFG_GPO(GPP_D11, 1, DEEP), + /* E0 : SATAXPCIE0 ==> WWAN_PERST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E0, 0, DEEP), + /* E13 : THC0_SPI1_IO2 ==> MEM_CH_SEL */ + PAD_CFG_GPI(GPP_E13, NONE, DEEP), + /* E15 : RSVD_TP ==> PCH_WP_OD */ + PAD_CFG_GPI_GPIO_DRIVER(GPP_E15, NONE, DEEP), + /* E16 : RSVD_TP ==> WWAN_RST_L (updated in ramstage) */ + PAD_CFG_GPO(GPP_E16, 0, DEEP), + /* F18 : THC1_SPI2_INT# ==> EC_IN_RW_OD */ + PAD_CFG_GPI(GPP_F18, NONE, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (updated in romstage) */ + PAD_CFG_GPO(GPP_F21, 0, DEEP), + /* H10 : UART0_RXD ==> UART_PCH_RX_DBG_TX */ + PAD_CFG_NF(GPP_H10, NONE, DEEP, NF2), + /* H11 : UART0_TXD ==> UART_PCH_TX_DBG_RX */ + PAD_CFG_NF(GPP_H11, NONE, DEEP, NF2), + /* + * enable EN_PP3300_SSD in bootblock, then PERST# is asserted, and + * then deassert PERST# in romstage + */ + /* H13 : I2C7_SCL ==> EN_PP3300_SD */ + PAD_CFG_GPO(GPP_H13, 1, DEEP), + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 0, DEEP), +}; + +static const struct pad_config romstage_gpio_table[] = { + /* B4 : PROC_GP3 ==> SSD_PERST_L */ + PAD_CFG_GPO(GPP_B4, 1, DEEP), + /* F21 : EXT_PWR_GATE2# ==> WWAN_FCPO_L (set here for correct power sequencing) */ + PAD_CFG_GPO(GPP_F21, 1, DEEP), +}; + +const struct pad_config *variant_gpio_override_table(size_t *num) +{ + *num = ARRAY_SIZE(override_gpio_table); + return override_gpio_table; +} + +const struct pad_config *variant_early_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(early_gpio_table); + return early_gpio_table; +} + +const struct pad_config *variant_romstage_gpio_table(size_t *num) +{ + *num = ARRAY_SIZE(romstage_gpio_table); + return romstage_gpio_table; +} diff --git a/src/mainboard/google/brya/variants/redrix4es/include/variant/ec.h b/src/mainboard/google/brya/variants/redrix4es/include/variant/ec.h new file mode 100644 index 0000000000..6f104d5da4 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/include/variant/ec.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef __VARIANT_EC_H__ +#define __VARIANT_EC_H__ + +#include <baseboard/ec.h> + +/* Enable EC backed Keyboard Backlight in ACPI */ +#define EC_ENABLE_KEYBOARD_BACKLIGHT + +#endif diff --git a/src/mainboard/google/brya/variants/redrix4es/include/variant/gpio.h b/src/mainboard/google/brya/variants/redrix4es/include/variant/gpio.h new file mode 100644 index 0000000000..99d09b2432 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/include/variant/gpio.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +#ifndef VARIANT_GPIO_H +#define VARIANT_GPIO_H + +#include <baseboard/gpio.h> + +#define WWAN_FCPO GPP_F21 +#define WWAN_RST GPP_E16 +#define WWAN_PERST GPP_E0 +#define T1_OFF_MS 16 +#define T2_OFF_MS 2 + +#endif diff --git a/src/mainboard/google/brya/variants/redrix4es/memory/Makefile.inc b/src/mainboard/google/brya/variants/redrix4es/memory/Makefile.inc new file mode 100644 index 0000000000..8590598885 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/memory/Makefile.inc @@ -0,0 +1,11 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/redrix/memory src/mainboard/google/brya/variants/redrix/memory/mem_parts_used.txt + +SPD_SOURCES = +SPD_SOURCES += spd/lp4x/set-0/spd-4.hex # ID = 0(0b0000) Parts = MT53E1G32D2NP-046 WT:A +SPD_SOURCES += spd/lp4x/set-0/spd-1.hex # ID = 1(0b0001) Parts = H9HCNNNBKMMLXR-NEE, K4U6E3S4AA-MGCR, MT53E512M32D2NP-046 WT:E, MT53E512M32D1NP-046 WT:B +SPD_SOURCES += spd/lp4x/set-0/spd-3.hex # ID = 2(0b0010) Parts = H9HCNNNCPMMLXR-NEE, K4UBE3D4AA-MGCR, MT53E1G32D2NP-046 WT:B +SPD_SOURCES += spd/lp4x/set-0/spd-2.hex # ID = 3(0b0011) Parts = H9HCNNNFAMMLXR-NEE +SPD_SOURCES += spd/lp4x/set-0/spd-7.hex # ID = 4(0b0100) Parts = MT53E2G32D4NQ-046 WT:A diff --git a/src/mainboard/google/brya/variants/redrix4es/memory/dram_id.generated.txt b/src/mainboard/google/brya/variants/redrix4es/memory/dram_id.generated.txt new file mode 100644 index 0000000000..296634a290 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/memory/dram_id.generated.txt @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +# This is an auto-generated file. Do not edit!! +# Generated by: +# util/spd_tools/bin/part_id_gen ADL lp4x src/mainboard/google/brya/variants/redrix/memory src/mainboard/google/brya/variants/redrix/memory/mem_parts_used.txt + +DRAM Part Name ID to assign +MT53E1G32D2NP-046 WT:A 0 (0000) +H9HCNNNBKMMLXR-NEE 1 (0001) +K4U6E3S4AA-MGCR 1 (0001) +MT53E512M32D2NP-046 WT:E 1 (0001) +H9HCNNNCPMMLXR-NEE 2 (0010) +K4UBE3D4AA-MGCR 2 (0010) +H9HCNNNFAMMLXR-NEE 3 (0011) +MT53E2G32D4NQ-046 WT:A 4 (0100) +MT53E512M32D1NP-046 WT:B 1 (0001) +MT53E1G32D2NP-046 WT:B 2 (0010) diff --git a/src/mainboard/google/brya/variants/redrix4es/memory/mem_parts_used.txt b/src/mainboard/google/brya/variants/redrix4es/memory/mem_parts_used.txt new file mode 100644 index 0000000000..71bd5fd385 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/memory/mem_parts_used.txt @@ -0,0 +1,10 @@ +MT53E1G32D2NP-046 WT:A +H9HCNNNBKMMLXR-NEE +K4U6E3S4AA-MGCR +MT53E512M32D2NP-046 WT:E +H9HCNNNCPMMLXR-NEE +K4UBE3D4AA-MGCR +H9HCNNNFAMMLXR-NEE +MT53E2G32D4NQ-046 WT:A +MT53E512M32D1NP-046 WT:B +MT53E1G32D2NP-046 WT:B diff --git a/src/mainboard/google/brya/variants/redrix4es/overridetree.cb b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb new file mode 100644 index 0000000000..67cb7f3b74 --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/overridetree.cb @@ -0,0 +1,523 @@ +fw_config + field DB_SD 0 1 + option SD_ABSENT 0 + option SD_GL9755S 1 + end + field KB_BL 2 2 + option KB_BL_ABSENT 0 + option KB_BL_PRESENT 1 + end + field AUDIO 3 5 + option AUDIO_UNKNOWN 0 + option MAX98390_ALC5682I_I2S_4SPK 1 + end + field DB_LTE 6 7 + option LTE_ABSENT 0 + option LTE_USB 1 + option LTE_PCIE 2 + end + field EPS 10 10 + option PRIVACY_SCREEN_ABSENT 0 + option PRIVACY_SCREEN 1 + end + field CAMERA_UFC 38 39 + option CAMERA_NONE 0 + option CAMERA_OV5675 1 + option CAMERA_HI556 2 + end + field TP_SOURCE 40 41 + option ELAN0000 0 + option ELAN2703 1 + end +end +chip soc/intel/alderlake + # This disables autonomous GPIO power management, otherwise + # old cr50 FW only supports short pulses; need to clarify + # the minimum PCH IRQ pulse width with Intel, b/180111628 + register "gpio_override_pm" = "1" + register "gpio_pm[COMM_0]" = "0" + register "gpio_pm[COMM_1]" = "0" + register "gpio_pm[COMM_2]" = "0" + register "gpio_pm[COMM_3]" = "0" + register "gpio_pm[COMM_4]" = "0" + register "gpio_pm[COMM_5]" = "0" + register "SaGv" = "SaGv_Enabled" + register "CnviBtAudioOffload" = "true" + # FIVR RFI Spread Spectrum 6% + register "FivrSpreadSpectrum" = "FIVR_SS_6" + + # Acoustic settings + register "AcousticNoiseMitigation" = "1" + register "SlowSlewRate[VR_DOMAIN_IA]" = "SLEW_FAST_8" + register "FastPkgCRampDisable[VR_DOMAIN_IA]" = "1" + + # Intel Common SoC Config + #+-------------------+---------------------------+ + #| Field | Value | + #+-------------------+---------------------------+ + #| GSPI1 | Fingerprint MCU | + #| I2C0 | Audio | + #| I2C1 | Touchscreen | + #| I2C2 | | + #| I2C3 | cr50 TPM. Early init is | + #| | required to set up a BAR | + #| | for TPM communication | + #| I2C5 | Trackpad | + #+-------------------+---------------------------+ + register "common_soc_config" = "{ + .i2c[0] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[1] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[2] = { + .speed = I2C_SPEED_FAST, + }, + .i2c[3] = { + .early_init = 1, + .speed = I2C_SPEED_FAST, + }, + .i2c[5] = { + .speed = I2C_SPEED_FAST, + }, + }" + device domain 0 on + device ref igpu on + chip drivers/gfx/generic + register "device_count" = "1" + register "device[0].name" = ""LCD"" + # Internal panel on the first port of the graphics chip + register "device[0].addr" = "0x80010400" + register "device[0].privacy.enabled" = "1" + register "device[0].privacy.gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H21)" + device generic 0 on + probe EPS PRIVACY_SCREEN + end + end + end # Integrated Graphics Device + device ref dtt on + chip drivers/intel/dptf + ## sensor information + register "options.tsr[0].desc" = ""DRAM"" + register "options.tsr[1].desc" = ""SOC"" + register "options.tsr[2].desc" = ""Charger"" + register "options.tsr[3].desc" = ""5V regulator"" + + # TODO: below values are initial reference values only + ## Passive Policy + register "policies.passive" = "{ + [0] = DPTF_PASSIVE(CPU, CPU, 55, 5000), + [1] = DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 45, 5000), + [2] = DPTF_PASSIVE(CPU, TEMP_SENSOR_1, 51, 5000), + [3] = DPTF_PASSIVE(CHARGER, TEMP_SENSOR_2, 51, 5000), + [4] = DPTF_PASSIVE(CPU, TEMP_SENSOR_3, 51, 5000), + }" + register "controls.power_limits" = "{ + .pl1 = { + .min_power = 13000, + .max_power = 15000, + .time_window_min = 42 * MSECS_PER_SEC, + .time_window_max = 42 * MSECS_PER_SEC, + .granularity = 200, + }, + .pl2 = { + .min_power = 35000, + .max_power = 35000, + .time_window_min = 42 * MSECS_PER_SEC, + .time_window_max = 42 * MSECS_PER_SEC, + .granularity = 1000, + } + }" + ## Charger Performance Control (Control, mA) + register "controls.charger_perf" = "{ + [0] = { 255, 1700 }, + [1] = { 24, 1500 }, + [2] = { 16, 1000 }, + [3] = { 8, 500 } + }" + device generic 0 alias dptf_policy on end + end + end + device ref ipu on + chip drivers/intel/mipi_camera + register "acpi_uid" = "0x50000" + register "acpi_name" = ""IPU0"" + register "device_type" = "INTEL_ACPI_CAMERA_CIO2" + + register "cio2_num_ports" = "1" + register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used + register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0"" + register "cio2_prt[0]" = "2" + device generic 0 on end + end + end + device ref cnvi_wifi on + chip drivers/wifi/generic + register "wake" = "GPE0_PME_B0" + device generic 0 on end + end + end + device ref pcie_rp6 on + probe DB_LTE LTE_PCIE + end + device ref tcss_dma0 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port1 as dfp[0].typec_port + device generic 0 on end + end + end + device ref tcss_dma1 on + chip drivers/intel/usb4/retimer + register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)" + use tcss_usb3_port3 as dfp[0].typec_port + device generic 0 on end + end + end + device ref pcie_rp8 on + chip soc/intel/common/block/pcie/rtd3 + register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)" + register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)" + register "srcclk_pin" = "3" + device generic 0 on end + end + end #PCIE8 SD card + device ref i2c0 on + chip drivers/i2c/generic + register "hid" = ""RTL5682"" + register "name" = ""RT58"" + register "desc" = ""Headset Codec"" + register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)" + # Set the jd_src to RT5668_JD1 for jack detection + register "property_count" = "1" + register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER" + register "property_list[0].name" = ""realtek,jd-src"" + register "property_list[0].integer" = "1" + device i2c 1a on + probe AUDIO MAX98390_ALC5682I_I2S_4SPK + end + end + chip drivers/i2c/max98390 + register "desc" = ""MAX98390 Speaker Amp 0"" + register "uid" = "0" + register "name" = ""MXW0"" + register "r0_calib_key" = ""dsm_calib_r0_0"" + register "temperature_calib_key" = ""dsm_calib_temp_0"" + register "dsm_param_file_name" = ""dsm_param_R"" + register "vmon_slot_no" = "0" + register "imon_slot_no" = "1" + device i2c 0x3a on + probe AUDIO MAX98390_ALC5682I_I2S_4SPK + end + end + chip drivers/i2c/max98390 + register "desc" = ""MAX98390 Speaker Amp 1"" + register "uid" = "1" + register "name" = ""MXW1"" + register "r0_calib_key" = ""dsm_calib_r0_1"" + register "temperature_calib_key" = ""dsm_calib_temp_1"" + register "dsm_param_file_name" = ""dsm_param_L"" + register "vmon_slot_no" = "1" + register "imon_slot_no" = "0" + device i2c 0x3b on + probe AUDIO MAX98390_ALC5682I_I2S_4SPK + end + end + chip drivers/i2c/max98390 + register "desc" = ""MAX98390 Speaker Amp 2"" + register "uid" = "2" + register "name" = ""MXW2"" + register "r0_calib_key" = ""dsm_calib_r0_2"" + register "temperature_calib_key" = ""dsm_calib_temp_2"" + register "dsm_param_file_name" = ""dsm_param_tt_R"" + register "vmon_slot_no" = "2" + register "imon_slot_no" = "3" + device i2c 0x38 on + probe AUDIO MAX98390_ALC5682I_I2S_4SPK + end + end + chip drivers/i2c/max98390 + register "desc" = ""MAX98390 Speaker Amp 3"" + register "uid" = "3" + register "name" = ""MXW3"" + register "r0_calib_key" = ""dsm_calib_r0_3"" + register "temperature_calib_key" = ""dsm_calib_temp_3"" + register "dsm_param_file_name" = ""dsm_param_tt_L"" + register "vmon_slot_no" = "3" + register "imon_slot_no" = "2" + device i2c 0x39 on + probe AUDIO MAX98390_ALC5682I_I2S_4SPK + end + end + end #I2C0 + device ref i2c1 on + chip drivers/i2c/hid + register "generic.hid" = ""ELAN2513"" + register "generic.desc" = ""ELAN Touchscreen"" + register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)" + register "generic.probed" = "1" + register "generic.reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)" + register "generic.reset_delay_ms" = "300" + register "generic.reset_off_delay_ms" = "1" + register "generic.enable_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" + register "generic.enable_delay_ms" = "6" + register "generic.stop_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" + register "generic.stop_off_delay_ms" = "1" + register "generic.has_power_resource" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 0x15 on end + end + end + device ref i2c2 on + chip drivers/intel/mipi_camera + register "acpi_hid" = ""OVTI5675"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Ov 5675 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "1" + register "num_freq_entries" = "1" + register "link_freq[0]" = "DEFAULT_LINK_FREQ" + register "remote_name" = ""IPU0"" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #EN_UCAM_LED_PWR + register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #EN_UCAM_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 36 on + probe CAMERA_UFC CAMERA_NONE + probe CAMERA_UFC CAMERA_OV5675 + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = ""INT3537"" + register "acpi_uid" = "0" + register "acpi_name" = ""CAM0"" + register "chip_name" = ""Hi-556 Camera"" + register "device_type" = "INTEL_ACPI_CAMERA_SENSOR" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D3_COLD" + + register "ssdb.lanes_used" = "2" + register "ssdb.link_used" = "1" + register "num_freq_entries" = "1" + register "link_freq[0]" = "437000000" + register "remote_name" = ""IPU0"" + + register "has_power_resource" = "1" + #Controls + register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3" + register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ" + + register "gpio_panel.gpio[0].gpio_num" = "GPP_D15" #EN_UCAM_LED_PWR + register "gpio_panel.gpio[1].gpio_num" = "GPP_D16" #EN_UCAM_PWR + register "gpio_panel.gpio[2].gpio_num" = "GPP_D3" #reset + + #_ON + register "on_seq.ops_cnt" = "5" + register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)" + register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)" + register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)" + register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)" + register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)" + + #_OFF + register "off_seq.ops_cnt" = "4" + register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)" + register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)" + register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)" + register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + device i2c 20 on + probe CAMERA_UFC CAMERA_HI556 + end + end + chip drivers/intel/mipi_camera + register "acpi_hid" = "ACPI_DT_NAMESPACE_HID" + register "acpi_uid" = "1" + register "acpi_name" = ""NVM0"" + register "chip_name" = ""M24C64X"" + register "device_type" = "INTEL_ACPI_CAMERA_NVM" + register "max_dstate_for_probe" = "ACPI_DEVICE_SLEEP_D0" + + register "has_power_resource" = "1" + #Controls + register "gpio_panel.gpio[0].gpio_num" = "GPP_D16" #EN_UCAM_PWR + + #_ON + register "on_seq.ops_cnt" = "1" + register "on_seq.ops[0]" = "SEQ_OPS_GPIO_ENABLE(0, 0)" + + #_OFF + register "off_seq.ops_cnt" = "1" + register "off_seq.ops[0]" = "SEQ_OPS_GPIO_DISABLE(0, 0)" + + register "nvm_size" = "0x2000" + register "nvm_pagesize" = "1" + register "nvm_readonly" = "1" + register "nvm_width" = "0x10" + register "nvm_compat" = ""atmel,24c64"" + device i2c 50 on end + end + + end + device ref i2c3 on + chip drivers/i2c/tpm + register "hid" = ""GOOG0005"" + register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)" + device i2c 50 on end + end + end + device ref i2c5 on + chip drivers/i2c/generic + register "hid" = ""ELAN0000"" + register "desc" = ""ELAN Touchpad"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "wake" = "GPE0_DW2_14" + register "probed" = "1" + device i2c 15 on + probe TP_SOURCE ELAN0000 + end + end + chip drivers/i2c/hid + register "generic.hid" = ""ELAN2703"" + register "generic.desc" = ""ELAN Touchpad"" + register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)" + register "generic.wake" = "GPE0_DW2_14" + register "generic.probed" = "1" + register "hid_desc_reg_offset" = "0x01" + device i2c 15 on + probe TP_SOURCE ELAN2703 + end + end + end + device ref gspi1 on + chip drivers/spi/acpi + register "name" = ""CRFP"" + register "hid" = "ACPI_DT_NAMESPACE_HID" + register "uid" = "1" + register "compat_string" = ""google,cros-ec-spi"" + register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)" + register "wake" = "GPE0_DW2_15" + device spi 0 on end + end # FPMCU + end + device ref pch_espi on + chip ec/google/chromeec + use conn0 as mux_conn[0] + use conn1 as mux_conn[1] + device pnp 0c09.0 on end + end + end + device ref pmc hidden + chip drivers/intel/pmc_mux + device generic 0 on + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "1" + register "usb3_port_number" = "1" + device generic 0 alias conn0 on end + end + chip drivers/intel/pmc_mux/conn + register "usb2_port_number" = "3" + register "usb3_port_number" = "3" + device generic 1 alias conn1 on end + end + end + end + end + device ref tcss_xhci on + chip drivers/usb/acpi + device ref tcss_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device ref tcss_usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-C Port C2 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(3, 1)" + device ref tcss_usb3_port3 on end + end + end + end + end + device ref xhci on + chip drivers/usb/acpi + device ref xhci_root_hub on + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C0 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(1, 1)" + device ref usb2_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-C Port C2 (MLB)"" + register "type" = "UPC_TYPE_C_USB2_SS_SWITCH" + register "group" = "ACPI_PLD_GROUP(3, 1)" + device ref usb2_port3 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port4 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Camera"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb2_port6 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Type-A Port (MLB)"" + register "type" = "UPC_TYPE_A" + register "group" = "ACPI_PLD_GROUP(4, 1)" + device ref usb2_port9 on end + end + chip drivers/usb/acpi + register "desc" = ""USB2 Bluetooth"" + register "type" = "UPC_TYPE_INTERNAL" + register "reset_gpio" = + "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)" + device ref usb2_port10 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 Type-A Port (MLB)"" + register "type" = "UPC_TYPE_USB3_A" + register "group" = "ACPI_PLD_GROUP(4, 1)" + device ref usb3_port1 on end + end + chip drivers/usb/acpi + register "desc" = ""USB3 WWAN"" + register "type" = "UPC_TYPE_INTERNAL" + device ref usb3_port4 on end + end + end + end + end + end +end diff --git a/src/mainboard/google/brya/variants/redrix4es/variant.c b/src/mainboard/google/brya/variants/redrix4es/variant.c new file mode 100644 index 0000000000..6a79780f6e --- /dev/null +++ b/src/mainboard/google/brya/variants/redrix4es/variant.c @@ -0,0 +1,8 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ + +#include <sar.h> + +const char *get_wifi_sar_cbfs_filename(void) +{ + return "wifi_sar_0.hex"; +} |