diff options
| author | Tim Wawrzynczak <twawrzynczak@chromium.org> | 2021-12-16 11:17:07 -0700 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2021-12-20 17:47:24 +0000 |
| commit | a7e85d43c858f063a9179c7865aef6ee32158c49 (patch) | |
| tree | 55eea940a2fe4e0631e8f54794a348e15ad162d2 /src/mainboard/google/brya/variants/anahera4es | |
| parent | 814069174279b02f63660cbff6a002904049828a (diff) | |
mb/google/brya/var/*: Add disable_gpio_export_in_crs to all devicetrees
None of the touchscreens used in the brya program (any brya board)
should require exporting of GPIOs in the ACPI _CRS method for any i2c
device. This can cause i2c devices to malfunction or cause timing
sequence violations if:
1) ACPI exports a PowerResource for the device that uses GPIOs that are
also exported in _CRS
2) The kernel driver for the device uses the GPIOs exported in _CRS for
its own purposes. This means the state of the pin is out of sync
between platform firmware and the kernel. The Linux ELAN I2C
touchcsreen driver (https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/upstream/drivers/input/touchscreen/elants_i2c.c;l=1429)
is one example of this.
Therefore, add disable_gpio_export_in_crs to all brya variants that use
the drivers/i2c/generic or drivers/i2c/hid chip drivers.
Change-Id: Ib4475bd0dc885e230911de6298fd95baa868ef29
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60175
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Diffstat (limited to 'src/mainboard/google/brya/variants/anahera4es')
| -rw-r--r-- | src/mainboard/google/brya/variants/anahera4es/overridetree.cb | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb index dc563a4c61..118ce0c41f 100644 --- a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb @@ -215,6 +215,7 @@ chip soc/intel/alderlake register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "has_power_resource" = "1" + register "disable_gpio_export_in_crs" = "1" device i2c 10 on end end chip drivers/i2c/hid @@ -229,6 +230,7 @@ chip soc/intel/alderlake "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end |