From a7e85d43c858f063a9179c7865aef6ee32158c49 Mon Sep 17 00:00:00 2001 From: Tim Wawrzynczak Date: Thu, 16 Dec 2021 11:17:07 -0700 Subject: mb/google/brya/var/*: Add disable_gpio_export_in_crs to all devicetrees None of the touchscreens used in the brya program (any brya board) should require exporting of GPIOs in the ACPI _CRS method for any i2c device. This can cause i2c devices to malfunction or cause timing sequence violations if: 1) ACPI exports a PowerResource for the device that uses GPIOs that are also exported in _CRS 2) The kernel driver for the device uses the GPIOs exported in _CRS for its own purposes. This means the state of the pin is out of sync between platform firmware and the kernel. The Linux ELAN I2C touchcsreen driver (https://source.chromium.org/chromiumos/chromiumos/codesearch/+/main:src/third_party/kernel/upstream/drivers/input/touchscreen/elants_i2c.c;l=1429) is one example of this. Therefore, add disable_gpio_export_in_crs to all brya variants that use the drivers/i2c/generic or drivers/i2c/hid chip drivers. Change-Id: Ib4475bd0dc885e230911de6298fd95baa868ef29 Signed-off-by: Tim Wawrzynczak Reviewed-on: https://review.coreboot.org/c/coreboot/+/60175 Tested-by: build bot (Jenkins) Reviewed-by: Raul Rangel --- src/mainboard/google/brya/variants/anahera4es/overridetree.cb | 2 ++ 1 file changed, 2 insertions(+) (limited to 'src/mainboard/google/brya/variants/anahera4es') diff --git a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb index dc563a4c61..118ce0c41f 100644 --- a/src/mainboard/google/brya/variants/anahera4es/overridetree.cb +++ b/src/mainboard/google/brya/variants/anahera4es/overridetree.cb @@ -215,6 +215,7 @@ chip soc/intel/alderlake register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)" register "has_power_resource" = "1" + register "disable_gpio_export_in_crs" = "1" device i2c 10 on end end chip drivers/i2c/hid @@ -229,6 +230,7 @@ chip soc/intel/alderlake "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)" register "generic.enable_delay_ms" = "1" register "generic.has_power_resource" = "1" + register "generic.disable_gpio_export_in_crs" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 40 on end end -- cgit v1.2.3