diff options
Diffstat (limited to 'tools')
| -rw-r--r-- | tools/clickhouse-backup.sh | 31 | ||||
| -rwxr-xr-x | tools/ipcam_capture.sh | 119 | ||||
| -rwxr-xr-x | tools/ipcam_motion_worker.sh | 327 | ||||
| -rwxr-xr-x | tools/ipcam_rtsp2hls.sh | 127 | ||||
| -rw-r--r-- | tools/lib.bash | 130 | ||||
| -rwxr-xr-x | tools/mcuota.py | 98 | ||||
| -rwxr-xr-x | tools/mcuota.sh | 14 | ||||
| -rwxr-xr-x | tools/process-motion-timecodes.py | 61 | ||||
| -rw-r--r-- | tools/remove-old-recordings.sh | 5 | ||||
| -rwxr-xr-x | tools/rotate-video.sh | 2 | ||||
| -rw-r--r-- | tools/sunxi-h3-i2c-reset.sh | 25 | ||||
| -rwxr-xr-x | tools/sunxi-setup-amixer.sh | 114 | ||||
| -rwxr-xr-x | tools/sync-recordings-to-remote.sh | 72 | ||||
| -rwxr-xr-x | tools/video-util.sh | 2 |
14 files changed, 2 insertions, 1125 deletions
diff --git a/tools/clickhouse-backup.sh b/tools/clickhouse-backup.sh deleted file mode 100644 index 6e938e4..0000000 --- a/tools/clickhouse-backup.sh +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/bash - -DIR=/var/lib/clickhouse/backup -MAX_COUNT=3 -NAME=backup_$(date -u +%Y-%m-%d) - -create() { - local name="$1" - clickhouse-backup create "$name" -} - -del() { - local name="$1" - clickhouse-backup delete local "$name" -} - -# create a backup -create "$NAME" - -# compress backup -cd "$DIR" -tar czvf $NAME.tar.gz $NAME - -# delete uncompressed files -del "$NAME" - -# delete old backups -for file in $(ls -t "${DIR}" | tail -n +$(( MAX_COUNT+1 ))); do - echo "removing $file..." - rm "$file" -done
\ No newline at end of file diff --git a/tools/ipcam_capture.sh b/tools/ipcam_capture.sh deleted file mode 100755 index 08b9093..0000000 --- a/tools/ipcam_capture.sh +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/bash - -PROGNAME="$0" -PORT=554 -IP= -CREDS= -DEBUG=0 -CHANNEL=1 -FORCE_UDP=0 -FORCE_TCP=0 -EXTENSION="mp4" - -die() { - echo >&2 "error: $@" - exit 1 -} - -usage() { - cat <<EOF -usage: $PROGNAME [OPTIONS] COMMAND - -Options: - --outdir output directory - --ip camera IP - --port RTSP port (default: 554) - --creds - --debug - --force-tcp - --force-udp - --channel 1|2 - -EOF - exit -} - -validate_channel() { - local c="$1" - case "$c" in - 1 | 2) - : - ;; - *) - die "Invalid channel" - ;; - esac -} - -[ -z "$1" ] && usage - -while [[ $# -gt 0 ]]; do - case "$1" in - --ip | --port | --creds | --outdir) - _var=${1:2} - _var=${_var^^} - printf -v "$_var" '%s' "$2" - shift - ;; - - --debug) - DEBUG=1 - ;; - - --force-tcp) - FORCE_TCP=1 - ;; - - --force-udp) - FORCE_UDP=1 - ;; - - --channel) - CHANNEL="$2" - shift - ;; - - --mov) - EXTENSION="mov" - ;; - - --mpv) - EXTENSION="mpv" - ;; - - *) - die "Unrecognized argument: $1" - ;; - esac - shift -done - -[ -z "$OUTDIR" ] && die "You must specify output directory (--outdir)." -[ -z "$IP" ] && die "You must specify camera IP address (--ip)." -[ -z "$PORT" ] && die "Port can't be empty." -[ -z "$CREDS" ] && die "You must specify credentials (--creds)." -validate_channel "$CHANNEL" - -if [ ! -d "${OUTDIR}" ]; then - mkdir "${OUTDIR}" || die "Failed to create ${OUTDIR}/${NAME}!" - echo "Created $OUTDIR." -fi - -args= -if [ "$DEBUG" = "1" ]; then - args="$args -v info" -else - args="$args -nostats -loglevel warning" -fi - -if [ "$FORCE_TCP" = "1" ]; then - args="$args -rtsp_transport tcp" -elif [ "$FORCE_UDP" = "1" ]; then - args="$args -rtsp_transport udp" -fi - -[ ! -z "$CREDS" ] && CREDS="${CREDS}@" - -ffmpeg $args -i rtsp://${CREDS}${IP}:${PORT}/Streaming/Channels/${CHANNEL} \ - -c copy -f segment -strftime 1 -segment_time 00:10:00 -segment_atclocktime 1 \ - "$OUTDIR/record_%Y-%m-%d-%H.%M.%S.${EXTENSION}" diff --git a/tools/ipcam_motion_worker.sh b/tools/ipcam_motion_worker.sh deleted file mode 100755 index c5f711d..0000000 --- a/tools/ipcam_motion_worker.sh +++ /dev/null @@ -1,327 +0,0 @@ -#!/bin/bash - -set -e - -DIR="$( cd "$( dirname "$(realpath "${BASH_SOURCE[0]}")" )" &>/dev/null && pwd )" -PROGNAME="$0" - -. "$DIR/lib.bash" - -curl_opts="-s --connect-timeout 10 --retry 5 --max-time 180 --retry-delay 0 --retry-max-time 180" -allow_multiple= -fetch_limit=10 - -config= -config_camera= -is_remote= -api_url= - -dvr_scan_path="$HOME/.local/bin/dvr-scan" -fs_root="/var/ipcam_motion_fs" -fs_max_filesize=146800640 - -declare -A config=() - -usage() { - cat <<EOF -usage: $PROGNAME OPTIONS - -Options: - -v, -vx be verbose. - -v enables debug logs. - -vx does \`set -x\`, may be used to debug the script. - --allow-multiple don't check for another instance - --L, --fetch-limit default: $fetch_limit - --remote - --local - --dvr-scan-path default: $dvr_scan_path - --fs-root default: $fs_root - --fs-max-filesize default: $fs_max_filesize -EOF - exit 1 -} - -get_recordings_dir() { - local camera="$1" - curl $curl_opts "${api_url}/api/camera/list" \ - | jq ".response.\"${camera}\".recordings_path" | tr -d '"' -} - -# returns three words per line: -# filename filesize camera -get_recordings_list() { - curl $curl_opts "${api_url}/api/recordings?limit=${fetch_limit}" \ - | jq '.response.files[] | [.name, .size, .cam] | join(" ")' | tr -d '"' -} - -read_camera_motion_config() { - local camera="$1" - local dst=config - - if [ "$config_camera" != "$camera" ]; then - local n=0 - local failed= - local key - local value - - while read line; do - n=$(( n+1 )) - - # skip empty lines or comments - if [ -z "$line" ] || [[ "$line" =~ ^#.* ]]; then - continue - fi - - if [[ $line = *"="* ]]; then - key="${line%%=*}" - value="${line#*=}" - eval "$dst[$key]=\"$value\"" - else - echoerr "config: invalid line $n" - failed=1 - fi - done < <(curl $curl_opts "${api_url}/api/motion/params/${camera}") - - config_camera="$camera" - - [ -z "$failed" ] - else - debug "read_camera_motion_config: config for $camera already loaded" - fi -} - -dump_config() { - for key in min_event_length downscale_factor frame_skip threshold; do - debug "config[$key]=${config[$key]}" - done -} - -get_camera_roi_config() { - local camera="$1" - curl $curl_opts "${api_url}/api/motion/params/${camera}/roi" -} - -report_failure() { - local camera="$1" - local file="$2" - local message="$3" - - local response=$(curl $curl_opts -X POST "${api_url}/api/motion/fail/${camera}" \ - -F "filename=$file" \ - -F "message=$message") - - print_response_error "$response" "report_failure" -} - -report_timecodes() { - local camera="$1" - local file="$2" - local timecodes="$3" - - local response=$(curl $curl_opts -X POST "${api_url}/api/motion/done/${camera}" \ - -F "filename=$file" \ - -F "timecodes=$timecodes") - - print_response_error "$response" "report_timecodes" -} - -print_response_error() { - local resp="$1" - local sufx="$2" - - local error="$(echo "$resp" | jq '.error')" - local message - - if [ "$error" != "null" ]; then - message="$(echo "$resp" | jq '.message' | tr -d '"')" - error="$(echo "$error" | tr -d '"')" - - echoerr "$sufx: $error ($message)" - fi -} - -process_queue() { - local tc - local url - local words - local file - local size - local camera - local local_recs_dir - - if [ "$is_remote" = "1" ]; then - pushd "${fs_root}" >/dev/null || die "failed to change to ${fs_root}" - touch tmp || die "directory '${fs_root}' is not writable" - rm tmp - - [ -f "video.mp4" ] && { - echowarn "video.mp4 already exists in ${fs_root}, removing.." - rm "video.mp4" - } - fi - - while read line; do - words=($line) - file=${words[0]} - size=${words[1]} - camera=${words[2]} - - debug "next video: cam=$camera file=$file" - - read_camera_motion_config "$camera" -# dump_config - - if [ "$is_remote" = "0" ]; then - local_recs_dir="$(get_recordings_dir "$camera")" - - debug "[$camera] processing $file..." - - tc=$(do_motion "$camera" "${local_recs_dir}/$file") - debug "[$camera] $file: timecodes=$tc" - - report_timecodes "$camera" "$file" "$tc" - else - if (( size > fs_max_filesize )); then - echoerr "[$camera] won't download $file, size exceeds fs_max_filesize ($size > ${fs_max_filesize})" - report_failure "$camera" "$file" "too large file" - continue - fi - - url="${api_url}/api/recordings/${camera}/download/${file}" - debug "[$camera] downloading $url..." - - if ! download "$url" "video.mp4"; then - echoerr "[$camera] failed to download $file" - report_failure "$camera" "$file" "download error" - continue - fi - - tc=$(do_motion "$camera" "video.mp4") - debug "[$camera] $file: timecodes=$tc" - - report_timecodes "$camera" "$file" "$tc" - - rm "video.mp4" - fi - done < <(get_recordings_list) - - if [ "$is_remote" = "1" ]; then popd >/dev/null; fi -} - -do_motion() { - local camera="$1" - local input="$2" - local tc - - local timecodes=() - - time_start - while read line; do - if ! [[ "$line" =~ ^#.* ]]; then - tc="$(do_dvr_scan "$input" "$line")" - if [ -n "$tc" ]; then - timecodes+=("$tc") - fi - fi - done < <(get_camera_roi_config "$camera") - - debug "[$camera] do_motion: finished in $(time_elapsed)s" - - timecodes="$(echo "${timecodes[@]}" | sed 's/ */ /g' | xargs)" - timecodes="${timecodes// /,}" - - echo "$timecodes" -} - -dvr_scan() { - "${dvr_scan_path}" "$@" -} - -do_dvr_scan() { - local input="$1" - local args= - - if [ ! -z "$2" ]; then - args="-roi $2" - echoinfo "dvr_scan(${BOLD}${input}${RST}${CYAN}): roi=($2), mt=${config[threshold]}" - else - echoinfo "dvr_scan(${BOLD}${input}${RST}${CYAN}): no roi, mt=${config[threshold]}" - fi - - dvr_scan -q -i "$input" -so \ - --min-event-length ${config[min_event_length]} \ - -df ${config[downscale_factor]} \ - --frame-skip ${config[frame_skip]} \ - -t ${config[threshold]} $args | tail -1 -} - -[[ $# -lt 1 ]] && usage - -while [[ $# -gt 0 ]]; do - case $1 in - -L|--fetch-limit) - fetch_limit="$2" - shift; shift - ;; - - --allow-multiple) - allow_multiple=1 - shift - ;; - - --remote) - is_remote=1 - shift - ;; - - --local) - is_remote=0 - shift - ;; - - --dvr-scan-path) - dvr_scan_path="$2" - shift; shift - ;; - - --fs-root) - fs_root="$2" - shift; shift - ;; - - --fs-max-filesize) - fs_max_filesize="$2" - shift; shift - ;; - - --api-url) - api_url="$2" - shift; shift - ;; - - -v) - VERBOSE=1 - shift - ;; - - -vx) - VERBOSE=1 - set -x - shift - ;; - - *) - die "unrecognized argument '$1'" - exit 1 - ;; - esac -done - -if [ -z "$allow_multiple" ] && pidof -o %PPID -x "$(basename "${BASH_SOURCE[0]}")" >/dev/null; then - die "process already running" -fi - -[ -z "$is_remote" ] && die "either --remote or --local is required" -[ -z "$api_url" ] && die "--api-url is required" - -process_queue
\ No newline at end of file diff --git a/tools/ipcam_rtsp2hls.sh b/tools/ipcam_rtsp2hls.sh deleted file mode 100755 index c321820..0000000 --- a/tools/ipcam_rtsp2hls.sh +++ /dev/null @@ -1,127 +0,0 @@ -#!/bin/bash - -PROGNAME="$0" -OUTDIR=/var/ipcamfs # should be tmpfs -PORT=554 -NAME= -IP= -USER= -PASSWORD= -DEBUG=0 -CHANNEL=1 -FORCE_UDP=0 -FORCE_TCP=0 -CUSTOM_PATH= - -die() { - echo >&2 "error: $@" - exit 1 -} - -usage() { - cat <<EOF -usage: $PROGNAME [OPTIONS] COMMAND - -Options: - --ip camera IP - --port RTSP port (default: 554) - --name camera name (chunks will be stored under $OUTDIR/{name}/) - --user - --password - --debug - --force-tcp - --force-udp - --channel 1|2 - --custom-path PATH - -EOF - exit -} - -validate_channel() { - local c="$1" - case "$c" in - 1|2) - : - ;; - *) - die "Invalid channel" - ;; - esac -} - -[ -z "$1" ] && usage - -while [[ $# -gt 0 ]]; do - case "$1" in - --ip|--port|--name|--user|--password) - _var=${1:2} - _var=${_var^^} - printf -v "$_var" '%s' "$2" - shift - ;; - - --debug) - DEBUG=1 - ;; - - --force-tcp) - FORCE_TCP=1 - ;; - - --force-udp) - FORCE_UDP=1 - ;; - - --channel) - CHANNEL="$2" - shift - ;; - - --custom-path) - CUSTOM_PATH="$2" - shift - ;; - - *) - die "Unrecognized argument: $1" - ;; - esac - shift -done - -[ -z "$IP" ] && die "You must specify camera IP address (--ip)." -[ -z "$PORT" ] && die "Port can't be empty." -[ -z "$NAME" ] && die "You must specify camera name (--name)." -[ -z "$USER" ] && die "You must specify username (--user)." -[ -z "$PASSWORD" ] && die "You must specify username (--password)." -validate_channel "$CHANNEL" - -if [ ! -d "${OUTDIR}/${NAME}" ]; then - mkdir "${OUTDIR}/${NAME}" || die "Failed to create ${OUTDIR}/${NAME}!" -fi - -args= -if [ "$DEBUG" = "1" ]; then - args="-v info" -else - args="-nostats -loglevel error" -fi - -if [ "$FORCE_TCP" = "1" ]; then - args="$args -rtsp_transport tcp" -elif [ "$FORCE_UDP" = "1" ]; then - args="$args -rtsp_transport udp" -fi - -if [ -z "$CUSTOM_PATH" ]; then - path="/Streaming/Channels/${CHANNEL}" -else - path="$CUSTOM_PATH" -fi - -ffmpeg $args -i "rtsp://${USER}:${PASSWORD}@${IP}:${PORT}${path}" \ - -c:v copy -c:a copy -bufsize 1835k \ - -pix_fmt yuv420p \ - -flags -global_header -hls_time 2 -hls_list_size 3 -hls_flags delete_segments \ - ${OUTDIR}/${NAME}/live.m3u8 diff --git a/tools/lib.bash b/tools/lib.bash deleted file mode 100644 index 1d73ab2..0000000 --- a/tools/lib.bash +++ /dev/null @@ -1,130 +0,0 @@ -# colored output -# -------------- - -BOLD=$(tput bold) -RST=$(tput sgr0) -RED=$(tput setaf 1) -GREEN=$(tput setaf 2) -YELLOW=$(tput setaf 3) -CYAN=$(tput setaf 6) -VERBOSE= - -echoinfo() { - >&2 echo "${CYAN}$@${RST}" -} - -echoerr() { - >&2 echo "${RED}${BOLD}error:${RST}${RED} $@${RST}" -} - -echowarn() { - >&2 echo "${YELLOW}${BOLD}warning:${RST}${YELLOW} $@${RST}" -} - -die() { - echoerr "$@" - exit 1 -} - -debug() { - if [ -n "$VERBOSE" ]; then - >&2 echo "$@" - fi -} - - -# measuring executing time -# ------------------------ - -__time_started= - -time_start() { - __time_started=$(date +%s) -} - -time_elapsed() { - local fin=$(date +%s) - echo $(( fin - __time_started )) -} - - -# config parsing -# -------------- - -read_config() { - local config_file="$1" - local dst="$2" - - [ -f "$config_file" ] || die "read_config: $config_file: no such file" - - local n=0 - local failed= - local key - local value - - while read line; do - n=$(( n+1 )) - - # skip empty lines or comments - if [ -z "$line" ] || [[ "$line" =~ ^#.* ]]; then - continue - fi - - if [[ $line = *"="* ]]; then - key="${line%%=*}" - value="${line#*=}" - eval "$dst[$key]=\"$value\"" - else - echoerr "config: invalid line $n" - failed=1 - fi - done < <(cat "$config_file") - - [ -z "$failed" ] -} - -check_config() { - local var="$1" - local keys="$2" - - local failed= - - for key in $keys; do - if [ -z "$(eval "echo -n \${$var[$key]}")" ]; then - echoerr "config: ${BOLD}${key}${RST}${RED} is missing" - failed=1 - fi - done - - [ -z "$failed" ] -} - - -# other functions -# --------------- - -installed() { - command -v "$1" > /dev/null - return $? -} - -download() { - local source="$1" - local target="$2" - - if installed curl; then - curl -f -s -o "$target" "$source" - elif installed wget; then - wget -q -O "$target" "$source" - else - die "neither curl nor wget found, can't proceed" - fi -} - -file_in_use() { - [ -n "$(lsof "$1")" ] -} - -file_mtime() { - stat -c %Y "$1" -} diff --git a/tools/mcuota.py b/tools/mcuota.py deleted file mode 100755 index 46968a8..0000000 --- a/tools/mcuota.py +++ /dev/null @@ -1,98 +0,0 @@ -#!/usr/bin/env python3 -import sys -import os.path -sys.path.extend([ - os.path.realpath( - os.path.join(os.path.dirname(os.path.join(__file__)), '..') - ) -]) - -from time import sleep -from argparse import ArgumentParser -from src.home.config import config -from src.home.mqtt import MqttRelay -from src.home.mqtt.esp import MqttEspDevice - - -def guess_filename(product: str, build_target: str): - return os.path.join( - products_dir, - product, - '.pio', - 'build', - build_target, - 'firmware.bin' - ) - - -def relayctl_publish_ota(filename: str, - device_id: str, - home_secret: str, - qos: int): - global stop - - def published(): - global stop - stop = True - - mqtt_relay = MqttRelay(devices=MqttEspDevice(id=device_id, secret=home_secret)) - mqtt_relay.configure_tls() - mqtt_relay.connect_and_loop(loop_forever=False) - mqtt_relay.push_ota(device_id, filename, published, qos) - while not stop: - sleep(0.1) - mqtt_relay.disconnect() - - -stop = False -products = { - 'relayctl': { - 'build_target': 'esp12e', - 'callback': relayctl_publish_ota - } -} - -products_dir = os.path.join( - os.path.dirname(__file__), - '..', - 'platformio' -) - - -def main(): - parser = ArgumentParser() - parser.add_argument('--filename', type=str) - parser.add_argument('--device-id', type=str, required=True) - parser.add_argument('--product', type=str, required=True) - parser.add_argument('--qos', type=int, default=1) - - config.load('mcuota_push', parser=parser) - arg = parser.parse_args() - - if arg.product not in products: - raise ValueError(f'invalid product: \'{arg.product}\' not found') - - if arg.device_id not in config['mqtt']['home_secrets']: - raise ValueError(f'home_secret for home {arg.device_id} not found in config!') - - filename = arg.filename if arg.filename else guess_filename(arg.product, products[arg.product]['build_target']) - if not os.path.exists(filename): - raise OSError(f'file \'{filename}\' does not exists') - - print('Please confirm following OTA params.') - print('') - print(f' Device ID: {arg.device_id}') - print(f' Product: {arg.product}') - print(f'Firmware file: {filename}') - print('') - input('Press any key to continue or Ctrl+C to abort.') - - products[arg.product]['callback'](filename, arg.device_id, config['mqtt']['home_secrets'][arg.device_id], qos=arg.qos) - - -if __name__ == '__main__': - try: - main() - except Exception as e: - print(str(e), file=sys.stderr) - sys.exit(1) diff --git a/tools/mcuota.sh b/tools/mcuota.sh deleted file mode 100755 index b2e7910..0000000 --- a/tools/mcuota.sh +++ /dev/null @@ -1,14 +0,0 @@ -#!/bin/bash - -DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" &> /dev/null && pwd )" - -. "$DIR/lib.bash" - -if [ -d "$DIR/../venv" ]; then - echoinfo "activating python venv" - . "$DIR/../venv/bin/activate" -else - echowarn "python venv not found" -fi - -"$DIR/mcuota.py" "$@"
\ No newline at end of file diff --git a/tools/process-motion-timecodes.py b/tools/process-motion-timecodes.py deleted file mode 100755 index 7be7977..0000000 --- a/tools/process-motion-timecodes.py +++ /dev/null @@ -1,61 +0,0 @@ -#!/usr/bin/env python3 -import os.path -from src.home.camera.util import dvr_scan_timecodes - -from argparse import ArgumentParser -from datetime import datetime, timedelta - -DATETIME_FORMAT = '%Y-%m-%d-%H.%M.%S' - - -def chunks(lst, n): - for i in range(0, len(lst), n): - yield lst[i:i + n] - - -def time2seconds(time: str) -> int: - time, frac = time.split('.') - frac = int(frac) - - h, m, s = [int(i) for i in time.split(':')] - - return round(s + m*60 + h*3600 + frac/1000) - - -def filename_to_datetime(filename: str) -> datetime: - filename = os.path.basename(filename).replace('record_', '').replace('.mp4', '') - return datetime.strptime(filename, DATETIME_FORMAT) - - -if __name__ == '__main__': - parser = ArgumentParser() - parser.add_argument('--source-filename', type=str, required=True, - help='recording filename') - parser.add_argument('--timecodes', type=str, required=True, - help='timecodes') - parser.add_argument('--padding', type=int, default=2, - help='amount of seconds to add before and after each fragment') - arg = parser.parse_args() - - if arg.padding < 0: - raise ValueError('invalid padding') - - fragments = dvr_scan_timecodes(arg.timecodes) - file_dt = filename_to_datetime(arg.source_filename) - - for fragment in fragments: - start, end = fragment - - start -= arg.padding - end += arg.padding - - if start < 0: - start = 0 - - duration = end - start - - dt1 = (file_dt + timedelta(seconds=start)).strftime(DATETIME_FORMAT) - dt2 = (file_dt + timedelta(seconds=end)).strftime(DATETIME_FORMAT) - filename = f'{dt1}__{dt2}.mp4' - - print(f'{start} {duration} {filename}') diff --git a/tools/remove-old-recordings.sh b/tools/remove-old-recordings.sh deleted file mode 100644 index d376572..0000000 --- a/tools/remove-old-recordings.sh +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/bash - -# to be launched by cron on remote server - -find /var/recordings -type f -mtime +14 -delete diff --git a/tools/rotate-video.sh b/tools/rotate-video.sh index 6d27b44..5ce4efe 100755 --- a/tools/rotate-video.sh +++ b/tools/rotate-video.sh @@ -5,7 +5,7 @@ set -e DIR="$( cd "$( dirname "$(realpath "${BASH_SOURCE[0]}")" )" &>/dev/null && pwd )" PROGNAME="$0" -. "$DIR/lib.bash" +. "$DIR/../include/bash/include.bash" usage() { diff --git a/tools/sunxi-h3-i2c-reset.sh b/tools/sunxi-h3-i2c-reset.sh deleted file mode 100644 index e654dfb..0000000 --- a/tools/sunxi-h3-i2c-reset.sh +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/sh - -devices="1c2ac00.i2c 1c2b000.i2c" -pins="8 9 28 30" -driver_path="/sys/bus/platform/drivers/mv64xxx_i2c" - -driver_unbind() { - echo -n "$1" > "$driver_path/unbind" -} - -driver_bind() { - echo -n "$1" > "$driver_path/bind" -} - -for dev in $devices; do driver_unbind "$dev"; done -echo "unbind done" - -for pin in pins; do - gpio mode $pin out - gpio write $pin 0 -done -echo "gpio reset done" - -for dev in $devices; do driver_bind "$dev"; done -echo "bind done"
\ No newline at end of file diff --git a/tools/sunxi-setup-amixer.sh b/tools/sunxi-setup-amixer.sh deleted file mode 100755 index 5746514..0000000 --- a/tools/sunxi-setup-amixer.sh +++ /dev/null @@ -1,114 +0,0 @@ -#!/bin/bash - -amixer() { - /usr/bin/amixer "$@" -} - -setup_opi_pc2() { - for v in unmute cap; do - amixer set "Line In" $v - amixer set "Mic1" $v - amixer set "Mic2" $v - done - - for k in "Mic1 Boost" "Line In" "Mic1" "Mic2 Boost" "Mic2"; do - amixer set "$k" "86%" - done -} - -setup_opi_one() { - for v in unmute cap; do - amixer set "Line In" $v - amixer set "Mic1" $v - done - - for k in "Mic1 Boost" "Line In" "Mic1"; do - amixer set "$k" "86%" - done -} - -setup_opi3lts() { - switches=( - "Left DAC Mixer ADCL" - "Left DAC Mixer I2SDACL" - "Left I2S Mixer ADCL" - "Left I2S Mixer I2SDACL" - "Left Input Mixer LINEINL" - "Left Input Mixer MIC1" - "Left Input Mixer MIC2" - "Left Input Mixer OMixerL" - "Left Input Mixer OMixerR" - "Left Input Mixer PhoneN" - "Left Input Mixer PhonePN" - "Left Output Mixer DACL" - "Left Output Mixer DACR" - "Left Output Mixer LINEINL" - "Left Output Mixer MIC1" - "Left Output Mixer MIC2" - "Left Output Mixer PhoneN" - "Left Output Mixer PhonePN" - "Right DAC Mixer ADCR" - "Right DAC Mixer I2SDACR" - "Right I2S Mixer ADCR" - "Right I2S Mixer I2SDACR" - "Right Input Mixer LINEINR" - "Right Input Mixer MIC1" - "Right Input Mixer MIC2" - "Right Input Mixer OMixerL" - "Right Input Mixer OMixerR" - "Right Input Mixer PhoneP" - "Right Input Mixer PhonePN" - "Right Output Mixer DACL" - "Right Output Mixer DACR" - "Right Output Mixer LINEINR" - "Right Output Mixer MIC1" - "Right Output Mixer MIC2" - "Right Output Mixer PhoneP" - "Right Output Mixer PhonePN" - ) - for v in "${switches[@]}"; do - value=on - case "$v" in - *Input*) - value=on - ;; - *Output*) - value=off - ;; - esac - amixer set "$v" $value - done - - to_mute=( - "I2S Mixer ADC" - "I2S Mixer DAC" - "ADC Input" - "DAC Mixer ADC" - "DAC Mxier DAC" # this is not a typo - ) - for v in "${to_mute[@]}"; do - amixer set "$v" "0%" - done - - amixer set "Master" "100%" - amixer set "MIC1 Boost" "100%" - amixer set "MIC2 Boost" "100%" - amixer set "Line Out Mixer" "86%" - amixer set "MIC Out Mixer" "71%" -} - -device="$(tr -d '\0' < /sys/firmware/devicetree/base/model)" -case "$device" in - *"Orange Pi PC 2") - setup_opi_pc2 - ;; - *"Orange Pi One"|*"Orange Pi Lite") - setup_opi_one - ;; - *"OrangePi 3 LTS") - setup_opi3lts - ;; - *) - >&2 echo "error: unidentified device: $device" - ;; -esac diff --git a/tools/sync-recordings-to-remote.sh b/tools/sync-recordings-to-remote.sh deleted file mode 100755 index cf979d1..0000000 --- a/tools/sync-recordings-to-remote.sh +++ /dev/null @@ -1,72 +0,0 @@ -#!/bin/bash - -PROGNAME="$0" -NODE_CONFIG="/etc/sound_node.toml" -REMOTE_USER=user -REMOTE_SERVER=solarmon.ru -REMOTE_DIRECTORY=/var/recordings - -set -e - -echoerr() { - >&2 echo "error: $@" -} - -echowarn() { - >&2 echo "warning: $@" -} - -telegram_alert() { - if [ -z "$TG_TOKEN" ] || [ -z "$TG_CHAT_ID" ]; then return; fi - curl -X POST \ - -F "chat_id=${TG_CHAT_ID}" \ - -F "text=$1" \ - "https://api.telegram.org/bot${TG_TOKEN}/sendMessage" -} - -fatal() { - echoerr "$@" - telegram_alert "$PROGNAME: $@" - exit 1 -} - -get_config_var() { - local varname="$1" - cat "$NODE_CONFIG" | grep "^$varname = \"" | awk '{print $3}' | tr -d '"' -} - -get_mp3_count() { - find "$LOCAL_DIR" -mindepth 1 -type f -name "*.mp3" -printf x | wc -c -} - -[ -z "$TG_TOKEN" ] && echowarn "TG_TOKEN is not set" -[ -z "$TG_CHAT_ID" ] && echowarn "TG_CHAT_ID is not set" - -NODE_NAME=$(get_config_var name) -LOCAL_DIR=$(get_config_var storage) - -[ -z "$NODE_NAME" ] && fatal "failed to parse NODE_NAME" -[ -z "$LOCAL_DIR" ] && fatal "failed to parse LOCAL_DIR" - -[ -d "$LOCAL_DIR" ] || fatal "$LOCAL_DIR is not a directory" - -COUNT=$(get_mp3_count) -(( $COUNT < 1 )) && { - echo "seems there's nothing to sync" - exit -} - -cd "$LOCAL_DIR" || fatal "failed to change to $LOCAL_DIR" - -rsync -azPv -e "ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR" \ - *.mp3 \ - ${REMOTE_USER}@${REMOTE_SERVER}:"${REMOTE_DIRECTORY}/${NODE_NAME}/" \ - --exclude temp.mp3 - -RC=$? - -if [ $RC -eq 0 ]; then - find "$LOCAL_DIR" -name "*.mp3" -type f -mmin +1440 -delete || fatal "find failed to delete old files" -else - fatal "failed to rsync: code $RC" -fi diff --git a/tools/video-util.sh b/tools/video-util.sh index 0ee5560..6fe6109 100755 --- a/tools/video-util.sh +++ b/tools/video-util.sh @@ -5,7 +5,7 @@ set -e DIR="$( cd "$( dirname "$(realpath "${BASH_SOURCE[0]}")" )" &> /dev/null && pwd )" PROGNAME="$0" -. "$DIR/lib.bash" +. "$DIR/../include/bash/include.bash" input= output= |