2 files changed, 0 insertions, 127 deletions
diff --git a/platformio/common/libs/temphum/homekit/temphum.cpp b/platformio/common/libs/temphum/homekit/temphum.cpp
deleted file mode 100644
index e69b3a5..0000000
--- a/platformio/common/libs/temphum/homekit/temphum.cpp
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef CONFIG_TARGET_ESP01
-#include <Arduino.h>
-#endif
-#include <homekit/logging.h>
-#include "temphum.h"
-
-namespace homekit::temphum {
-
-void Sensor::setup() const {
-#ifndef CONFIG_TARGET_ESP01
-    pinMode(CONFIG_SDA_GPIO, OUTPUT);
-    pinMode(CONFIG_SCL_GPIO, OUTPUT);
-
-    Wire.begin(CONFIG_SDA_GPIO, CONFIG_SCL_GPIO);
-#else
-    Wire.begin();
-#endif
-}
-
-void Sensor::writeCommand(int reg) const {
-    Wire.beginTransmission(dev_addr);
-    Wire.write(reg);
-    Wire.endTransmission();
-    delay(500); // wait for the measurement to be ready
-}
-
-SensorData Si7021::read() {
-    uint8_t error = 0;
-    writeCommand(0xf3); // command to measure temperature
-    Wire.requestFrom(dev_addr, 2);
-    if (Wire.available() < 2) {
-        PRINTLN("Si7021: 0xf3: could not read 2 bytes");
-        error = 1;
-    }
-    uint16_t temp_raw = Wire.read() << 8 | Wire.read();
-    double temperature = ((175.72 * temp_raw) / 65536.0) - 46.85;
-
-    writeCommand(0xf5); // command to measure humidity
-    Wire.requestFrom(dev_addr, 2);
-    if (Wire.available() < 2) {
-        PRINTLN("Si7021: 0xf5: could not read 2 bytes");
-        error = 1;
-    }
-    uint16_t hum_raw = Wire.read() << 8 | Wire.read();
-    double humidity = ((125.0 * hum_raw) / 65536.0) - 6.0;
-
-    return {
-        .error = error,
-        .temp = temperature,
-        .rh = humidity
-    };
-}
-
-SensorData DHT12::read() {
-    SensorData sd;
-    byte raw[5];
-    sd.error = 1;
-
-    writeCommand(0);
-    Wire.requestFrom(dev_addr, 5);
-
-    if (Wire.available() < 5) {
-        PRINTLN("DHT12: could not read 5 bytes");
-        goto end;
-    }
-
-    // Parse the received data
-    for (uint8_t i = 0; i < 5; i++)
-        raw[i] = Wire.read();
-
-    if (((raw[0] + raw[1] + raw[2] + raw[3]) & 0xff) != raw[4]) {
-        PRINTLN("DHT12: checksum error");
-        goto end;
-    }
-
-    // Calculate temperature and humidity values
-    sd.temp = raw[2] + (raw[3] & 0x7f) * 0.1;
-    if (raw[3] & 0x80)
-        sd.temp *= -1;
-
-    sd.rh = raw[0] + raw[1] * 0.1;
-
-    sd.error = 0;
-
-end:
-    return sd;
-}
-
-}
diff --git a/platformio/common/libs/temphum/homekit/temphum.h b/platformio/common/libs/temphum/homekit/temphum.h
deleted file mode 100644
index 1952ce0..0000000
--- a/platformio/common/libs/temphum/homekit/temphum.h
+++ /dev/null
@@ -1,38 +0,0 @@
-#pragma once
-
-#include <Wire.h>
-
-namespace homekit::temphum {
-
-struct SensorData {
-    uint8_t error = 0;
-    double temp = 0; // celsius
-    double rh = 0; // relative humidity percentage
-};
-
-
-class Sensor {
-protected:
-    int dev_addr;
-public:
-    explicit Sensor(int dev) : dev_addr(dev) {}
-    void setup() const;
-    void writeCommand(int reg) const;
-    virtual SensorData read() = 0;
-};
-
-
-class Si7021 : public Sensor {
-public:
-    SensorData read() override;
-    Si7021() : Sensor(0x40) {}
-};
-
-
-class DHT12 : public Sensor {
-public:
-    SensorData read() override;
-    DHT12() : Sensor(0x5c) {}
-};
-
-}
-\ No newline at end of file