merge with master

6 files changed, 264 insertions, 0 deletions

diff --git a/misc/home_linux_boards/usr/local/bin/homekit_ipcam_capture_restart.sh b/misc/home_linux_boards/usr/local/bin/homekit_ipcam_capture_restart.sh
new file mode 100755
index 0000000..85144da
--- /dev/null
+++ b/misc/home_linux_boards/usr/local/bin/homekit_ipcam_capture_restart.sh
@@ -0,0 +1,7 @@
+#!/bin/bash
+
+for f in $(ls /etc/ipcam_capture.conf.d/ | xargs); do
+        camera="${f/.conf/}"
+        echo "restarting $camera"
+        systemctl restart ipcam_capture@${camera}
+done
\ No newline at end of file
diff --git a/misc/home_linux_boards/usr/local/bin/homekit_ipcam_rtsp2hls_restart.sh b/misc/home_linux_boards/usr/local/bin/homekit_ipcam_rtsp2hls_restart.sh
new file mode 100755
index 0000000..61ee623
--- /dev/null
+++ b/misc/home_linux_boards/usr/local/bin/homekit_ipcam_rtsp2hls_restart.sh
@@ -0,0 +1,8 @@
+#!/bin/bash
+cd /etc/ipcam_rtsp2hls.conf.d/
+for f in *-low.conf; do
+        f=${f/-low.conf/}
+        echo "restarting $f"
+        systemctl restart ipcam_rtsp2hls@${f}
+        systemctl restart ipcam_rtsp2hls@${f}-low
+done
diff --git a/misc/home_linux_boards/usr/local/bin/homekit_make_netns_per_upstream.sh b/misc/home_linux_boards/usr/local/bin/homekit_make_netns_per_upstream.sh
new file mode 100755
index 0000000..fb152fa
--- /dev/null
+++ b/misc/home_linux_boards/usr/local/bin/homekit_make_netns_per_upstream.sh
@@ -0,0 +1,38 @@
+#!/bin/bash
+
+set -x
+set -e
+
+get_default_iface() {
+	ip -4 r show default | awk '{print $5}'
+}
+
+declare -A UPSTREAMS=(
+	[mtsil]=102
+	[mtsazov]=100
+	[rtazov]=101
+)
+
+for name in "${!UPSTREAMS[@]}"; do
+	mark=${UPSTREAMS[$name]}
+	veth_addr=10.${mark}.1.1
+	vpeer_addr=10.${mark}.1.2
+	veth_if=veth${name}
+	vpeer_if=vpeer${name}
+
+	ip netns add $name
+	ip link add $veth_if type veth peer name $vpeer_if
+	ip link set $vpeer_if netns $name
+	ip addr add $veth_addr/24 dev $veth_if
+	ip link set $veth_if up
+
+	ip netns exec $name ip addr add $vpeer_addr/24 dev $vpeer_if
+	ip netns exec $name ip link set $vpeer_if up
+	ip netns exec $name ip link set lo up
+	ip netns exec $name ip route add default via $veth_addr
+
+	iptables -t mangle -A PREROUTING -s $vpeer_addr/24 -j MARK --set-mark $mark
+	iptables -t nat -A POSTROUTING -s $vpeer_addr/24 -o "$(get_default_iface)" -j MASQUERADE
+done
+
+sysctl net.ipv4.ip_forward=1
diff --git a/misc/home_linux_boards/usr/local/bin/homekit_sunxi_h3_i2c_reset.sh b/misc/home_linux_boards/usr/local/bin/homekit_sunxi_h3_i2c_reset.sh
new file mode 100755
index 0000000..e654dfb
--- /dev/null
+++ b/misc/home_linux_boards/usr/local/bin/homekit_sunxi_h3_i2c_reset.sh
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+devices="1c2ac00.i2c 1c2b000.i2c"
+pins="8 9 28 30"
+driver_path="/sys/bus/platform/drivers/mv64xxx_i2c"
+
+driver_unbind() {
+	echo -n "$1" > "$driver_path/unbind"
+}
+
+driver_bind() {
+	echo -n "$1" > "$driver_path/bind"
+}
+
+for dev in $devices; do driver_unbind "$dev"; done
+echo "unbind done"
+
+for pin in pins; do
+	gpio mode $pin out
+	gpio write $pin 0
+done
+echo "gpio reset done"
+
+for dev in $devices; do driver_bind "$dev"; done
+echo "bind done"
\ No newline at end of file
diff --git a/misc/home_linux_boards/usr/local/bin/homekit_sunxi_setup_amixer.sh b/misc/home_linux_boards/usr/local/bin/homekit_sunxi_setup_amixer.sh
new file mode 100755
index 0000000..5746514
--- /dev/null
+++ b/misc/home_linux_boards/usr/local/bin/homekit_sunxi_setup_amixer.sh
@@ -0,0 +1,114 @@
+#!/bin/bash
+
+amixer() {
+    /usr/bin/amixer "$@"
+}
+
+setup_opi_pc2() {
+	for v in unmute cap; do
+		amixer set "Line In" $v
+		amixer set "Mic1" $v
+		amixer set "Mic2" $v
+	done
+
+	for k in "Mic1 Boost" "Line In" "Mic1" "Mic2 Boost" "Mic2"; do
+		amixer set "$k" "86%"
+	done
+}
+
+setup_opi_one() {
+	for v in unmute cap; do
+		amixer set "Line In" $v
+		amixer set "Mic1" $v
+  	done
+
+  	for k in "Mic1 Boost" "Line In" "Mic1"; do
+		amixer set "$k" "86%"
+  	done
+}
+
+setup_opi3lts() {
+	switches=(
+		"Left DAC Mixer ADCL"
+		"Left DAC Mixer I2SDACL"
+		"Left I2S Mixer ADCL"
+		"Left I2S Mixer I2SDACL"
+		"Left Input Mixer LINEINL"
+		"Left Input Mixer MIC1"
+		"Left Input Mixer MIC2"
+		"Left Input Mixer OMixerL"
+		"Left Input Mixer OMixerR"
+		"Left Input Mixer PhoneN"
+		"Left Input Mixer PhonePN"
+		"Left Output Mixer DACL"
+		"Left Output Mixer DACR"
+		"Left Output Mixer LINEINL"
+		"Left Output Mixer MIC1"
+		"Left Output Mixer MIC2"
+		"Left Output Mixer PhoneN"
+		"Left Output Mixer PhonePN"
+		"Right DAC Mixer ADCR"
+		"Right DAC Mixer I2SDACR"
+		"Right I2S Mixer ADCR"
+		"Right I2S Mixer I2SDACR"
+		"Right Input Mixer LINEINR"
+		"Right Input Mixer MIC1"
+		"Right Input Mixer MIC2"
+		"Right Input Mixer OMixerL"
+		"Right Input Mixer OMixerR"
+		"Right Input Mixer PhoneP"
+		"Right Input Mixer PhonePN"
+		"Right Output Mixer DACL"
+		"Right Output Mixer DACR"
+		"Right Output Mixer LINEINR"
+		"Right Output Mixer MIC1"
+		"Right Output Mixer MIC2"
+		"Right Output Mixer PhoneP"
+		"Right Output Mixer PhonePN"
+	)
+	for v in "${switches[@]}"; do
+		value=on
+		case "$v" in
+			*Input*)
+				value=on
+				;;
+			*Output*)
+				value=off
+				;;
+		esac
+		amixer set "$v" $value
+	done
+
+	to_mute=(
+		"I2S Mixer ADC"
+		"I2S Mixer DAC"
+		"ADC Input"
+		"DAC Mixer ADC"
+		"DAC Mxier DAC" # this is not a typo
+	)
+	for v in "${to_mute[@]}"; do
+		amixer set "$v" "0%"
+	done
+
+	amixer set "Master" "100%"
+	amixer set "MIC1 Boost" "100%"
+	amixer set "MIC2 Boost" "100%"
+	amixer set "Line Out Mixer" "86%"
+	amixer set "MIC Out Mixer" "71%"
+}
+
+device="$(tr -d '\0' < /sys/firmware/devicetree/base/model)"
+case "$device" in
+	*"Orange Pi PC 2")
+		setup_opi_pc2
+		;;
+	*"Orange Pi One"|*"Orange Pi Lite")
+		setup_opi_one
+		;;
+	*"OrangePi 3 LTS")
+		setup_opi3lts
+		;;
+	*)
+		>&2 echo "error: unidentified device: $device"
+		;;
+esac
diff --git a/misc/home_linux_boards/usr/local/bin/homekit_sync_recordings_to_remote.sh b/misc/home_linux_boards/usr/local/bin/homekit_sync_recordings_to_remote.sh
new file mode 100755
index 0000000..cf979d1
--- /dev/null
+++ b/misc/home_linux_boards/usr/local/bin/homekit_sync_recordings_to_remote.sh
@@ -0,0 +1,72 @@
+#!/bin/bash
+
+PROGNAME="$0"
+NODE_CONFIG="/etc/sound_node.toml"
+REMOTE_USER=user
+REMOTE_SERVER=solarmon.ru
+REMOTE_DIRECTORY=/var/recordings
+
+set -e
+
+echoerr() {
+	>&2 echo "error: $@"
+}
+
+echowarn() {
+	>&2 echo "warning: $@"
+}
+
+telegram_alert() {
+	if [ -z "$TG_TOKEN" ] || [ -z "$TG_CHAT_ID" ]; then return; fi
+	curl -X POST \
+		-F "chat_id=${TG_CHAT_ID}" \
+		-F "text=$1" \
+		"https://api.telegram.org/bot${TG_TOKEN}/sendMessage"
+}
+
+fatal() {
+	echoerr "$@"
+	telegram_alert "$PROGNAME: $@"
+	exit 1
+}
+
+get_config_var() {
+	local varname="$1"
+	cat "$NODE_CONFIG"  | grep "^$varname = \"" | awk '{print $3}' | tr -d '"'
+}
+
+get_mp3_count() {
+	find "$LOCAL_DIR" -mindepth 1 -type f -name "*.mp3" -printf x | wc -c
+}
+
+[ -z "$TG_TOKEN" ] && echowarn "TG_TOKEN is not set"
+[ -z "$TG_CHAT_ID" ] && echowarn "TG_CHAT_ID is not set"
+
+NODE_NAME=$(get_config_var name)
+LOCAL_DIR=$(get_config_var storage)
+
+[ -z "$NODE_NAME" ] && fatal "failed to parse NODE_NAME"
+[ -z "$LOCAL_DIR" ] && fatal "failed to parse LOCAL_DIR"
+
+[ -d "$LOCAL_DIR" ] || fatal "$LOCAL_DIR is not a directory"
+
+COUNT=$(get_mp3_count)
+(( $COUNT < 1 )) && {
+	echo "seems there's nothing to sync"
+	exit
+}
+
+cd "$LOCAL_DIR" || fatal "failed to change to $LOCAL_DIR"
+
+rsync -azPv -e "ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no -o LogLevel=ERROR" \
+	*.mp3 \
+	${REMOTE_USER}@${REMOTE_SERVER}:"${REMOTE_DIRECTORY}/${NODE_NAME}/" \
+	--exclude temp.mp3
+
+RC=$?
+
+if [ $RC -eq 0 ]; then
+	find "$LOCAL_DIR" -name "*.mp3" -type f -mmin +1440 -delete || fatal "find failed to delete old files"
+else
+	fatal "failed to rsync: code $RC"
+fi