1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
|
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Include this file into a mainboard's DSDT _SB device tree and it will
* expose the W83627DHG SuperIO and some of its functionality.
*
* It allows the change of IO ports, IRQs and DMA settings on logical
* devices, disabling and reenabling logical devices and controlling power
* saving mode on logical devices or the whole chip.
*
* LDN State
* 0x0 FDC Not implemented
* 0x1 PP Not implemented
* 0x2 UARTA Implemented, partially tested
* 0x3 UARTB UART only, partially tested
* 0x5 KBC Implemented, untested
* 0x6 SPI Not implemented
* 0x7 GPIO6 Not implemented
* 0x8 WDT0&PLED Not implemented
* 0x9 GPIO2-5 Not implemented
* 0xa ACPI Not implemented
* 0xb HWM Resources, PM only
* 0xc PECI&SST Not implemented
*
* Controllable through preprocessor defines:
* SUPERIO_DEV Device identifier for this SIO (e.g. SIO0)
* SUPERIO_PNP_BASE I/o address of the first PnP configuration register
* W83627DHG_SHOW_UARTA If defined, UARTA will be exposed.
* W83627DHG_SHOW_UARTB If defined, UARTB will be exposed.
* W83627DHG_SHOW_KBC If defined, the KBC will be exposed.
* W83627DHG_SHOW_PS2M If defined, PS/2 mouse support will be exposed.
* W83627DHG_SHOW_HWMON If defined, the hardware monitor will be exposed.
*/
#undef SUPERIO_CHIP_NAME
#define SUPERIO_CHIP_NAME W83627DHG
#include <superio/acpi/pnp.asl>
Device(SUPERIO_DEV) {
Name (_HID, EisaId("PNP0A05"))
Name (_STR, Unicode("Winbond W83627DHG Super I/O"))
Name (_UID, SUPERIO_UID(SUPERIO_DEV,))
/* Mutex for accesses to the configuration ports */
Mutex(CRMX, 1)
/* SuperIO configuration ports */
OperationRegion (CREG, SystemIO, SUPERIO_PNP_BASE, 0x02)
Field (CREG, ByteAcc, NoLock, Preserve)
{
PNP_ADDR_REG, 8,
PNP_DATA_REG, 8
}
IndexField (PNP_ADDR_REG, PNP_DATA_REG, ByteAcc, NoLock, Preserve)
{
Offset (0x07),
PNP_LOGICAL_DEVICE, 8, /* Logical device selector */
Offset (0x22),
FDPW, 1, /* FDC Power Down */
, 2,
PRPW, 1, /* PRT Power Down */
UAPW, 1, /* UART A Power Down */
UBPW, 1, /* UART B Power Down */
HWPW, 1, /* HWM Power Down */
Offset (0x23),
IPD, 1, /* Immediate Chip Power Down */
Offset (0x30),
PNP_DEVICE_ACTIVE, 1, /* Logical device activation */
Offset (0x60),
PNP_IO0_HIGH_BYTE, 8, /* First I/O port base - high byte */
PNP_IO0_LOW_BYTE, 8, /* First I/O port base - low byte */
Offset (0x62),
PNP_IO1_HIGH_BYTE, 8, /* Second I/O port base - high byte */
PNP_IO1_LOW_BYTE, 8, /* Second I/O port base - low byte */
Offset (0x70),
PNP_IRQ0, 8, /* First IRQ */
Offset (0x72),
PNP_IRQ1, 8, /* Second IRQ */
Offset (0x74),
PNP_DMA0, 8, /* DMA */
Offset (0xf3),
SULM, 8, /* Suspend LED Mode Register */
}
Method (_CRS)
{
/* Announce the used i/o ports to the OS */
Return (ResourceTemplate () {
IO (Decode16, SUPERIO_PNP_BASE, SUPERIO_PNP_BASE, 0x01, 0x02)
})
}
#undef PNP_ENTER_MAGIC_1ST
#undef PNP_ENTER_MAGIC_2ND
#undef PNP_ENTER_MAGIC_3RD
#undef PNP_ENTER_MAGIC_4TH
#undef PNP_EXIT_MAGIC_1ST
#undef PNP_EXIT_SPECIAL_REG
#undef PNP_EXIT_SPECIAL_VAL
#define PNP_ENTER_MAGIC_1ST 0x87
#define PNP_ENTER_MAGIC_2ND 0x87
#define PNP_EXIT_MAGIC_1ST 0xaa
#include <superio/acpi/pnp_config.asl>
/* PM: indicate IPD (Immediate Power Down) bit state as D0/D3 */
Method (_PSC) {
ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
Local0 = IPD
EXIT_CONFIG_MODE ()
If (Local0) { Return (3) }
Else { Return (0) }
}
/* PM: Switch to D0 by setting IPD low */
Method (_PS0) {
ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
IPD = 0
EXIT_CONFIG_MODE ()
}
/* PM: Switch to D3 by setting IPD high */
Method (_PS3) {
ENTER_CONFIG_MODE (PNP_NO_LDN_CHANGE)
IPD = 1
EXIT_CONFIG_MODE ()
}
/* Suspend LED: Write given three-bit value into appropriate register.
From the datasheet:
000 - drive pin constantly high
001 - drive 0.5Hz pulses
010 - drive pin constantly low
011 - drive 2Hz pulses
100 - drive 1Hz pulses
101 - drive 4Hz pulses
110 - drive 0.25Hz pulses
111 - drive 0.25Hz pulses
(all pulses with 50% duty cycle) */
#define SUPERIO_SUSL_LDN 9
Method (SUSL, 1, Serialized) {
ENTER_CONFIG_MODE (SUPERIO_SUSL_LDN)
Local0 = SULM
Local0 &= 0x1f
Local0 |= (Arg0 << 5)
SULM = Local0
EXIT_CONFIG_MODE ()
}
#ifdef W83627DHG_SHOW_UARTA
#undef SUPERIO_UART_LDN
#undef SUPERIO_UART_DDN
#undef SUPERIO_UART_PM_REG
#undef SUPERIO_UART_PM_VAL
#undef SUPERIO_UART_PM_LDN
#define SUPERIO_UART_LDN 2
#define SUPERIO_UART_PM_REG UAPW
#define SUPERIO_UART_PM_VAL 0
#define SUPERIO_UART_PM_LDN PNP_NO_LDN_CHANGE
#include <superio/acpi/pnp_uart.asl>
#endif
#ifdef W83627DHG_SHOW_UARTB
#undef SUPERIO_UART_LDN
#undef SUPERIO_UART_DDN
#undef SUPERIO_UART_PM_REG
#undef SUPERIO_UART_PM_VAL
#undef SUPERIO_UART_PM_LDN
#define SUPERIO_UART_LDN 3
#define SUPERIO_UART_PM_REG UBPW
#define SUPERIO_UART_PM_VAL 0
#define SUPERIO_UART_PM_LDN PNP_NO_LDN_CHANGE
#include <superio/acpi/pnp_uart.asl>
#endif
#ifdef W83627DHG_SHOW_KBC
#undef SUPERIO_KBC_LDN
#undef SUPERIO_KBC_PS2M
#undef SUPERIO_KBC_PS2LDN
#define SUPERIO_KBC_LDN 5
#ifdef W83627DHG_SHOW_PS2M
#define SUPERIO_KBC_PS2M 1
#endif
#include <superio/acpi/pnp_kbc.asl>
#endif
#ifdef W83627DHG_SHOW_HWMON
#undef SUPERIO_PNP_LDN
#undef SUPERIO_PNP_DDN
#undef SUPERIO_PNP_NO_DIS
#undef SUPERIO_PNP_PM_REG
#undef SUPERIO_PNP_PM_VAL
#undef SUPERIO_PNP_PM_LDN
#undef SUPERIO_PNP_IO0
#undef SUPERIO_PNP_IO1
#undef SUPERIO_PNP_IRQ0
#undef SUPERIO_PNP_IRQ1
#undef SUPERIO_PNP_DMA
#define SUPERIO_PNP_LDN 11
#define SUPERIO_PNP_PM_REG HWPW
#define SUPERIO_PNP_PM_VAL 0
#define SUPERIO_PNP_PM_LDN PNP_NO_LDN_CHANGE
#define SUPERIO_PNP_IO0 0x08, 0x08
#define SUPERIO_PNP_IRQ0 1
#include <superio/acpi/pnp_generic.asl>
#endif
}
|
