1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* Pre-RAM driver for the SMSC KBC1100 Super I/O chip */
#include <arch/io.h>
#include <stdint.h>
#include "sio1036.h"
static inline void sio1036_enter_conf_state(pnp_devfn_t dev)
{
unsigned port = dev >> 8;
outb(0x55, port);
}
static inline void sio1036_exit_conf_state(pnp_devfn_t dev)
{
unsigned port = dev >> 8;
outb(0xaa, port);
}
/* Detect SMSC SIO1036 LPC Debug Card status */
static u8 detect_sio1036_chip(unsigned port)
{
pnp_devfn_t dev = PNP_DEV(port, SIO1036_SP1);
unsigned data;
sio1036_enter_conf_state(dev);
data = pnp_read_config(dev, 0x0D);
sio1036_exit_conf_state(dev);
/* Detect SMSC SIO1036 chip */
if (data == 0x82) {
/* Found SMSC SIO1036 chip */
return 0;
}
else {
return 1;
};
}
void sio1036_enable_serial(pnp_devfn_t dev, u16 iobase)
{
unsigned port = dev >> 8;
if (detect_sio1036_chip(port) != 0)
return;
sio1036_enter_conf_state(dev);
/* Enable SMSC UART 0 */
/* Valid configuration cycle */
pnp_write_config(dev, 0x00, 0x28);
/* PP power/mode/cr lock */
pnp_write_config(dev, 0x01, 0x98 | LPT_POWER_DOWN);
pnp_write_config(dev, 0x02, 0x08 | UART_POWER_DOWN);
/*Auto power management*/
pnp_write_config(dev, 0x07, 0x00);
/*ECP FIFO threhod */
pnp_write_config(dev, 0x0A, 0x00 | IR_OUTPUT_MUX);
/*GPIO direction register 2 */
pnp_write_config(dev, 0x033, 0x00);
/*UART Mode */
pnp_write_config(dev, 0x0C, 0x02);
/* GPIO polarity regisgter 2 */
pnp_write_config(dev, 0x034, 0x00);
/* Enable SMSC UART 0 */
/*Set base io address */
pnp_write_config(dev, 0x25, (u8)(iobase >> 2));
/* Set UART IRQ onto 0x04 */
pnp_write_config(dev, 0x28, 0x04);
sio1036_exit_conf_state(dev);
}
|
