1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 The ChromiumOS Authors. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdint.h>
#include <arch/io.h>
#include "chip.h"
void sio1007_setreg(u16 lpc_port, u8 reg, u8 value, u8 mask)
{
u8 reg_value;
outb(reg, lpc_port);
reg_value = inb(lpc_port + 1);
reg_value &= ~mask;
reg_value |= (value & mask);
outb(reg_value, lpc_port + 1);
}
int sio1007_enable_uart_at(u16 port)
{
/* Enable config mode. */
outb(0x55, port);
if (inb(port) != 0x55)
return 0; /* There is no LPC device at this address. */
/* Registers 12 and 13 hold config address, look for a match. */
outb(0x12, port);
if (inb(port + 1) != (port & 0xff))
return 0;
outb(0x13, port);
if (inb(port + 1) != (port >> 8))
return 0;
/* This must be the sio1007, enable the UART. */
/* turn on power */
sio1007_setreg(port, 0x2, 1 << 3, 1 << 3);
/* enable high speed */
sio1007_setreg(port, 0xc, 1 << 6, 1 << 6);
/* set the base address */
sio1007_setreg(port, 0x24, CONFIG_TTYS0_BASE >> 2, 0xff);
/* Disable config mode. */
outb(0xaa, port);
return 1;
}
|
