1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/io.h>
#include <device/pnp.h>
#include <stdint.h>
#include <device/pnp_ops.h>
#include "sch5545.h"
static void pnp_enter_conf_state(pnp_devfn_t dev)
{
unsigned int port = dev >> 8;
outb(0x55, port);
}
static void pnp_exit_conf_state(pnp_devfn_t dev)
{
unsigned int port = dev >> 8;
outb(0xaa, port);
}
/*
* Set the BAR / iobase for a specific device.
* pnp_devfn_t dev must be in conf state.
* LDN LPC IF must be active.
*/
static void set_iobase(pnp_devfn_t dev, uint16_t device_addr, uint16_t bar_addr)
{
uint16_t bar;
/*
* Set the BAR. We have to flip the BAR due to different register layout:
* - LPC addr LSB on device_addr + 2
* - LPC addr MSB on device_addr + 3
*/
bar = ((bar_addr >> 8) & 0xff) | ((bar_addr & 0xff) << 8);
pnp_set_iobase(dev, device_addr + 2, bar);
}
/*
* Set the IRQ for the specific device.
* pnp_devfn_t dev must be in conf state.
* LDN LPC IF must be active.
*/
static void set_irq(pnp_devfn_t dev, uint8_t irq_device, unsigned int irq)
{
if (irq > 15)
return;
pnp_write_config(dev, SCH5545_IRQ_BASE + irq, irq_device);
}
/*
* sch5545 has 2 LEDs which are accessed via color (1 bit), 2 bits for a
* pattern blink and 1 bit for "code fetch" which means the cpu/mainboard is
* working (always set).
*/
void sch5545_set_led(unsigned int runtime_reg_base, unsigned int color, uint16_t blink)
{
uint8_t val = blink & SCH5545_LED_BLINK_MASK;
val |= SCH5545_LED_CODE_FETCH;
if (color)
val |= SCH5545_LED_COLOR_GREEN;
outb(val, runtime_reg_base + SCH5545_RR_LED);
}
void sch5545_early_init(unsigned int port)
{
pnp_devfn_t dev;
/* Enable SERIRQ */
dev = PNP_DEV(port, SCH5545_LDN_GCONF);
pnp_enter_conf_state(dev);
pnp_set_logical_device(dev);
pnp_write_config(dev, 0x24, pnp_read_config(dev, 0x24) | 0x04);
/* Enable LPC interface */
dev = PNP_DEV(port, SCH5545_LDN_LPC);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 1);
/* Set LPC BAR mask */
pnp_write_config(dev, SCH5545_BAR_LPC_IF, 0x01);
/* BAR valid, Frame/LDN = 0xc */
pnp_write_config(dev, SCH5545_BAR_LPC_IF + 1, SCH5545_LDN_LPC | 0x80);
set_iobase(dev, SCH5545_BAR_LPC_IF, port);
/* Enable Runtime Registers */
/* The Runtime Registers BAR is 0x40 long */
pnp_write_config(dev, SCH5545_BAR_RUNTIME_REG, 0x3f);
/* BAR valid, Frame/LDN = 0xa */
pnp_write_config(dev, SCH5545_BAR_RUNTIME_REG + 1, SCH5545_LDN_RR | 0x80);
/* Map Runtime Registers */
set_iobase(dev, SCH5545_BAR_RUNTIME_REG, SCH5545_RUNTIME_REG_BASE);
dev = PNP_DEV(port, SCH5545_LDN_RR);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 1);
/* Set LED color and indicate BIOS has reached code fetch phase */
sch5545_set_led(SCH5545_RUNTIME_REG_BASE, SCH5545_LED_COLOR_GREEN,
SCH5545_LED_BLINK_ON);
/* Configure EMI */
dev = PNP_DEV(port, SCH5545_LDN_LPC);
pnp_set_logical_device(dev);
/* EMI BAR has 11 registers, but vendor sets the mask to 0xf */
pnp_write_config(dev, SCH5545_BAR_EM_IF, 0x0f);
/* BAR valid, Frame/LDN = 0x00 */
pnp_write_config(dev, SCH5545_BAR_EM_IF + 1, SCH5545_LDN_EMI | 0x80);
set_iobase(dev, SCH5545_BAR_EM_IF, SCH5545_EMI_BASE);
pnp_exit_conf_state(dev);
}
void sch5545_enable_uart(unsigned int port, unsigned int uart_no)
{
pnp_devfn_t dev;
if (uart_no > 1)
return;
/* Configure serial port */
dev = PNP_DEV(port, SCH5545_LDN_LPC);
pnp_enter_conf_state(dev);
pnp_set_logical_device(dev);
/* Set UART BAR mask to 0x07 (8 registers) */
pnp_write_config(dev, SCH5545_BAR_UART1 + (4 * uart_no), 0x07);
/* Set BAR valid, Frame/LDN = UART1/2 LDN 0x07/0x08 */
pnp_write_config(dev, SCH5545_BAR_UART1 + (4 * uart_no) + 1,
(SCH5545_LDN_UART1 + uart_no) | 0x80);
set_iobase(dev, SCH5545_BAR_UART1 + (4 * uart_no), (uart_no == 1) ? 0x2f8 : 0x3f8);
/* IRQ 3 for UART2, IRQ4 for UART1 */
set_irq(dev, SCH5545_LDN_UART1 + uart_no, 4 - uart_no);
dev = PNP_DEV(port, SCH5545_LDN_UART1 + uart_no);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 1);
pnp_write_config(dev, SCH5545_UART_CONFIG_SELECT, SCH5545_UART_POWER_VCC);
pnp_exit_conf_state(dev);
}
int sch5545_get_gpio(uint8_t sio_port, uint8_t gpio)
{
pnp_devfn_t dev;
uint16_t runtime_reg_base;
uint8_t gpio_bank, gpio_num;
gpio_bank = gpio / 10;
gpio_num = gpio % 10;
/*
* GPIOs are divided into banks of 8 GPIOs (kind of). Each group starts at decimal
* base, i.e. 8 GPIOs from GPIO000, 8 GPIOs from GPIO010, etc., up to GPIO071 and
* GPIO072 which are an exception (only two GPIOs in the bank 7).
*/
if (gpio_num > 7)
return -1;
else if (gpio_bank == 7 && gpio_num > 1)
return -1;
else if (gpio_bank > 7)
return -1;
dev = PNP_DEV(sio_port, SCH5545_LDN_LPC);
pnp_enter_conf_state(dev);
pnp_set_logical_device(dev);
runtime_reg_base = pnp_read_config(dev, SCH5545_BAR_RUNTIME_REG + 2);
runtime_reg_base |= pnp_read_config(dev, SCH5545_BAR_RUNTIME_REG + 3) << 8;
pnp_exit_conf_state(dev);
if (runtime_reg_base == 0)
return -1;
outb(gpio_bank * 8 + gpio_num, runtime_reg_base + SCH5545_RR_GPIO_SEL);
return inb(runtime_reg_base + SCH5545_RR_GPIO_READ) & 1;
}
|
