1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* A generic romstage (pre-ram) driver for Nuvoton variant Super I/O chips.
*
* The following is derived directly from the vendor Nuvoton's data-sheets:
*
* To toggle between `configuration mode` and `normal operation mode` as to
* manipulate the various LDN's in Nuvoton Super I/O's we are required to
* pass magic numbers `passwords keys`.
*
* NUVOTON_ENTRY_KEY := enable configuration : 0x87
* NUVOTON_EXIT_KEY := disable configuration : 0xAA
*
* To modify a LDN's configuration register, we use the index port to select
* the index of the LDN and then write to the data port to alter the
* parameters. A default index, data port pair is 0x4E, 0x4F respectively, a
* user modified pair is 0x2E, 0x2F respectively.
*
*/
#include <arch/io.h>
#include <device/pnp_ops.h>
#include <device/pnp.h>
#include <stdint.h>
#include "nuvoton.h"
#define NUVOTON_ENTRY_KEY 0x87
#define NUVOTON_EXIT_KEY 0xAA
/* Enable configuration: pass entry key '0x87' into index port dev
* two times. */
void nuvoton_pnp_enter_conf_state(pnp_devfn_t dev)
{
u16 port = dev >> 8;
outb(NUVOTON_ENTRY_KEY, port);
outb(NUVOTON_ENTRY_KEY, port);
}
/* Disable configuration: pass exit key '0xAA' into index port dev. */
void nuvoton_pnp_exit_conf_state(pnp_devfn_t dev)
{
u16 port = dev >> 8;
outb(NUVOTON_EXIT_KEY, port);
}
/* Bring up early serial debugging output before the RAM is initialized. */
void nuvoton_enable_serial(pnp_devfn_t dev, u16 iobase)
{
if (!CONFIG(CONSOLE_SERIAL))
return;
nuvoton_pnp_enter_conf_state(dev);
if (CONFIG(SUPERIO_NUVOTON_NCT5539D_COM_A))
/* Route COM A to GPIO8 pin group */
pnp_write_config(dev, 0x2a, 0x40);
if (CONFIG(SUPERIO_NUVOTON_NCT6776_COM_A))
/* Route COM A to GPIO8 pin group */
pnp_write_config(dev, 0x2a, 0x40);
if (CONFIG(SUPERIO_NUVOTON_NCT6791D_COM_A))
/* Route COM A to GPIO8 pin group */
pnp_write_config(dev, 0x2a, 0x00);
pnp_set_logical_device(dev);
pnp_set_enable(dev, 0);
pnp_set_iobase(dev, PNP_IDX_IO0, iobase);
pnp_set_enable(dev, 1);
nuvoton_pnp_exit_conf_state(dev);
}
|
