1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License v2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#define SATA_MISC_CTRL 0x45
static void sata_i_init(struct device *dev)
{
u8 reg;
printk_debug("Configuring VIA SATA controller\n");
/* Class IDE Disk */
reg = pci_read_config8(dev, SATA_MISC_CTRL);
reg &= 0x7f; /* Sub Class Write Protect off */
pci_write_config8(dev, SATA_MISC_CTRL, reg);
/* Change the device class to SATA from RAID. */
pci_write_config8(dev, PCI_CLASS_DEVICE, 0x1);
reg |= 0x80; /* Sub Class Write Protect on */
pci_write_config8(dev, SATA_MISC_CTRL, reg);
return;
}
static void sata_ii_init(struct device *dev) {
u8 reg;
sata_i_init(dev);
/* analog black magic, you may or may not need to adjust 0x60-0x6f, depends on PCB */
/* Analog PHY - gen1
* CDR bandwidth [6:5] = 3
* Squelch Window Select [4:3] = 1
* CDR Charge Pump [2:0] = 1
*/
pci_write_config8(dev, 0x64, 0x49);
/* adjust driver current source value to 9 */
reg = pci_read_config8(dev, 0x65);
reg &= 0xf0;
reg |= 0x9;
pci_write_config8(dev, 0x65, reg);
/* set all manual termination 50ohm bits [2:0] and enable [4] */
reg = pci_read_config8(dev, 0x6a);
reg |= 0xf;
pci_write_config8(dev, 0x6a, reg);
/* Analog PHY - gen2
* CDR bandwidth [5:4] = 2
* Pre / De-emphasis Level [7:6] controls bits [3:2], rest in 0x6e
* CDR Charge Pump [2:0] = 1
*/
reg = pci_read_config8(dev, 0x6f);
reg &= 0x08;
reg |= 0x61;
pci_write_config8(dev, 0x6f, reg);
/* check if staggered spinup is supported */
reg = pci_read_config8(dev, 0x83);
if ((reg & 0x8) == 0) {
/* start OOB sequence on both drives */
reg |= 0x30;
pci_write_config8(dev, 0x83, reg);
}
}
static const struct device_operations sata_i_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = sata_i_init,
.enable = 0,
.ops_pci = 0,
};
static const struct device_operations sata_ii_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = sata_ii_init,
.enable = 0,
.ops_pci = 0,
};
static const struct pci_driver northbridge_driver_ii __pci_driver = {
.ops = &sata_ii_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VT8237_SATA,
};
static const struct pci_driver northbridge_driver_i __pci_driver = {
.ops = &sata_i_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VT6420_SATA,
};
|
