1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
* Copyright (C) 2011 Alexandru Gagniuc <mr.nuke.me@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include <console/console.h>
#include "k8x8xx.h"
void k8x8xx_vt8237_mirrored_regs_fill(struct k8x8xx_vt8237_mirrored_regs *regs)
{
msr_t msr;
regs->rom_shadow_ctrl_pg_c = 0xff;
regs->rom_shadow_ctrl_pg_d = 0xff;
regs->rom_shadow_ctrl_pg_e_memhole_smi_decoding = 0xff;
regs->rom_shadow_ctrl_pg_f_memhole = 0x30;
regs->smm_apic_decoding = 0x19;
msr = rdmsr(TOP_MEM);
regs->shadow_mem_ctrl = msr.lo >> 24;
regs->low_top_address = msr.lo >> 16;
}
/* We support here K8M890/K8T890 and VT8237R PCI1/Vlink which setup is not in separate
* PCI device 0:11.7, but it is mapped to PCI 0:0.7 (0x70-0x7c for PCI1)
*/
void k8x8xx_vt8237r_cfg(struct device *dev, struct device *devsb)
{
u8 regm3;
struct k8x8xx_vt8237_mirrored_regs mregs;
pci_write_config8(dev, 0x70, 0xc2);
/* PCI Control */
#if !CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD
pci_write_config8(dev, 0x72, 0xee);
#endif
pci_write_config8(dev, 0x73, 0x01);
#if CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD
pci_write_config8(dev, 0x74, 0x64);
pci_write_config8(dev, 0x75, 0x3f);
#else
pci_write_config8(dev, 0x74, 0x24);
pci_write_config8(dev, 0x75, 0x0f);
#endif
pci_write_config8(dev, 0x76, 0x50);
#if !CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD
pci_write_config8(dev, 0x77, 0x08);
#endif
pci_write_config8(dev, 0x78, 0x01);
/* APIC on HT */
pci_write_config8(dev, 0x7c, 0x7f);
pci_write_config8(dev, 0x7f, 0x02);
k8x8xx_vt8237_mirrored_regs_fill(&mregs);
pci_write_config8(dev, 0x57, mregs.shadow_mem_ctrl); /* Shadow mem CTRL */
pci_write_config8(dev, 0x61, mregs.rom_shadow_ctrl_pg_c); /* Shadow page C */
pci_write_config8(dev, 0x62, mregs.rom_shadow_ctrl_pg_d); /* Shadow page D */
pci_write_config8(dev, 0xe6, mregs.smm_apic_decoding); /* SMM and APIC decoding */
regm3 = mregs.rom_shadow_ctrl_pg_e_memhole_smi_decoding; /* Shadow page E */
/*
* All access bits for 0xE0000-0xEFFFF encode as just 2 bits!
* So the NB reg is quite inconsistent, we expect there only 0xff or 0x00,
* and write them to 0x63 7-6 but! VIA 8237A has the mirror at 0x64!
*/
if (regm3 == 0xff)
regm3 = 0xc0;
else
regm3 = 0x0;
/* Shadow page F + memhole copy */
pci_write_config8(dev, 0x63, regm3 | (mregs.rom_shadow_ctrl_pg_f_memhole & 0x3F));
}
/**
* Setup the V-Link for VT8237R, 8X mode.
*
* For K8T890CF VIA recommends what is in VIA column, AW is award 8X:
*
* REG DEF AW VIA-8X VIA-4X
* -----------------------------
* NB V-Link Manual Driving Control strobe 0xb5 0x46 0x46 0x88 0x88
* NB V-Link Manual Driving Control - Data 0xb6 0x46 0x46 0x88 0x88
* NB V-Link Receiving Strobe Delay 0xb7 0x02 0x02 0x61 0x01
* NB V-Link Compensation Control bit4,0 (b5,b6) 0xb4 0x10 0x10 0x11 0x11
* SB V-Link Strobe Drive Control 0xb9 0x00 0xa5 0x98 0x98
* SB V-Link Data drive Control???? 0xba 0x00 0xbb 0x77 0x77
* SB V-Link Receive Strobe Delay???? 0xbb 0x04 0x11 0x11 0x11
* SB V-Link Compensation Control bit0 (use b9) 0xb8 0x00 0x01 0x01 0x01
* V-Link CKG Control 0xb0 0x05 0x05 0x06 0x03
* V-Link CKG Control 0xb1 0x05 0x05 0x01 0x03
*/
static void vt8237r_vlink_init(struct device *dev)
{
u8 reg;
/*
* This init code is valid only for the VT8237R! For different
* southbridges (e.g. VT8237A, VT8237S, VT8237 (without plus R)
* and VT8251) a different init code is required.
*/
pci_write_config8(dev, 0xb5, 0x88);
pci_write_config8(dev, 0xb6, 0x88);
pci_write_config8(dev, 0xb7, 0x61);
reg = pci_read_config8(dev, 0xb4);
reg |= 0x11;
pci_write_config8(dev, 0xb4, reg);
pci_write_config8(dev, 0xb9, 0x98);
pci_write_config8(dev, 0xba, 0x77);
pci_write_config8(dev, 0xbb, 0x11);
reg = pci_read_config8(dev, 0xb8);
reg |= 0x1;
pci_write_config8(dev, 0xb8, reg);
pci_write_config8(dev, 0xb0, 0x06);
pci_write_config8(dev, 0xb1, 0x01);
/* Program V-link 8X 16bit full duplex, parity enabled. */
pci_write_config8(dev, 0x48, 0xa3);
}
static void ctrl_init(struct device *dev)
{
printk(BIOS_DEBUG, "K8x8xx: Initializing V-Link to VT8237R sb: ");
/* TODO: Fix some ordering issue for V-link set Rx77[6] and PCI1_Rx4F[0]
should to 1 */
/* C2P Read ACK Return Priority */
/* PCI CFG Address bits[27:24] are used as extended register address
bit[11:8] */
#if !CONFIG_SOUTHBRIDGE_VIA_SUBTYPE_K8T800_OLD
pci_write_config8(dev, 0x47, 0x30);
#endif
/* VT8237R specific configuration other SB are done in their own directories */
device_t devsb = dev_find_device(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_VT8237R_LPC, 0);
if (devsb) {
vt8237r_vlink_init(dev);
k8x8xx_vt8237r_cfg(dev, devsb);
} else {
printk(BIOS_DEBUG, "VT8237R LPC not found !\n");
return;
}
printk(BIOS_DEBUG, " Done\n");
printk(BIOS_DEBUG, " VIA_X_7 device dump:\n");
dump_south(dev);
}
static struct pci_operations lops_pci = {
.set_subsystem = pci_dev_set_subsystem,
};
static const struct device_operations ctrl_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = ctrl_init,
.ops_pci = &lops_pci,
};
static const unsigned short ctrl_ids[] = {
PCI_DEVICE_ID_VIA_K8T800_NB_SB_CTR,
PCI_DEVICE_ID_VIA_K8M800_NB_SB_CTR,
PCI_DEVICE_ID_VIA_K8T890CE_7,
PCI_DEVICE_ID_VIA_K8T890CF_7,
PCI_DEVICE_ID_VIA_K8M890CE_7,
0
};
static const struct pci_driver northbridge_driver_t800 __pci_driver = {
.ops = &ctrl_ops,
.vendor = PCI_VENDOR_ID_VIA,
.devices= ctrl_ids,
};
|
