1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
|
/*
* Copyright 2004 Tyan Computer
* by yhlu@tyan.com
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include "ck804.h"
static void usb1_init(struct device *dev)
{
struct southbridge_nvidia_ck804_config const *conf = dev->chip_info;
if (conf->usb1_hc_reset) {
/*
* Somehow the warm reset does not really reset the USB
* controller. Later, during boot, when the Bus Master bit is
* set, the USB controller trashes the memory, causing weird
* misbehavior. Was detected on Sun Ultra40, where mptable
* was damaged.
*/
uint32_t bar0 = pci_read_config32(dev, 0x10);
uint32_t *regs = (uint32_t *) (bar0 & ~0xfff);
/* OHCI USB HCCommandStatus Register, HostControllerReset bit */
regs[2] |= 1;
}
}
static void lpci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
pci_write_config32(dev, 0x40,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
static struct pci_operations lops_pci = {
.set_subsystem = lpci_set_subsystem,
};
static struct device_operations usb_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = usb1_init,
// .enable = ck804_enable,
.scan_bus = 0,
.ops_pci = &lops_pci,
};
static const struct pci_driver usb_driver __pci_driver = {
.ops = &usb_ops,
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_CK804_USB,
};
|
