path: root/src/southbridge/intel/sch/audio.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2008 Advanced Micro Devices, Inc.
 * Copyright (C) 2008-2009 coresystems GmbH
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <arch/io.h>
#include <delay.h>

#define HDA_ICII_REG 0x68
#define   HDA_ICII_BUSY (1 << 0)
#define   HDA_ICII_VALID  (1 << 1)

typedef struct southbridge_intel_sch_config config_t;

static int set_bits(u32 port, u32 mask, u32 val)
{
	u32 reg32;
	int count;

	/* Write (val & mask) to port */
	val &= mask;
	reg32 = read32(port);
	reg32 &= ~mask;
	reg32 |= val;
	write32(port, reg32);

	/* Wait for readback of register to
	 * match what was just written to it
	 */
	count = 50;
	do {
		/* Wait 1ms based on BKDG wait time */
		mdelay(1);
		reg32 = read32(port);
		reg32 &= mask;
	} while ((reg32 != val) && --count);

	/* Timeout occurred */
	if (!count)
		return -1;
	return 0;
}

static int codec_detect(u32 base)
{
	u32 reg32;
	int count;

	/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
	if (set_bits(base + 0x08, 1, 1) == -1)
		goto no_codec;

	/* clear STATESTS bits (BAR + 0xE)[2:0] */
	reg32 = read32(base + 0x0E);
	reg32 |= 7;
	write32(base + 0x0E, reg32);

	/* Wait for readback of register to
	 * match what was just written to it
	 */
	count = 50;
	do {
		/* Wait 1ms based on BKDG wait time */
		mdelay(1);
		reg32 = read32(base + 0x0E);
	} while ((reg32 != 0) && --count);
	/* Timeout occured */
	if (!count)
		goto no_codec;

	/* Set Bit0 to 0 to enter reset state (BAR + 0x8)[0] */
	if (set_bits(base + 0x08, 1, 0) == -1)
		goto no_codec;

	/* Set Bit 0 to 1 to exit reset state (BAR + 0x8)[0] */
	if (set_bits(base + 0x08, 1, 1) == -1)
		goto no_codec;

	/* Read in Codec location (BAR + 0xe)[2..0] */
	reg32 = read32(base + 0xe);
	reg32 &= 0x0f;
	if (!reg32)
		goto no_codec;

	return reg32;

no_codec:
	/* Codec Not found */
	/* Put HDA back in reset (BAR + 0x8) [0] */
	set_bits(base + 0x08, 1, 0);
	printk(BIOS_DEBUG, "sch_audio: No codec!\n");
	return 0;
}

const u32 *cim_verb_data = NULL;
u32 cim_verb_data_size = 0;

static u32 find_verb(struct device *dev, u32 viddid, const u32 ** verb)
{
	printk(BIOS_DEBUG, "sch_audio: dev=%s\n", dev_path(dev));
	printk(BIOS_DEBUG, "sch_audio: Reading viddid=%x\n", viddid);

	int idx = 0;

	while (idx < (cim_verb_data_size / sizeof(u32))) {
		u32 verb_size = 4 * cim_verb_data[idx + 2];	// in u32
		verb_size++;	// we ship an additional gain value
		if (cim_verb_data[idx] != viddid) {
			idx += verb_size + 3;	// skip verb + header
			continue;
		}
		*verb = &cim_verb_data[idx + 3];
		return verb_size;
	}

	/* Not all codecs need to load another verb */
	return 0;
}

/**
 *  Wait 50usec for the codec to indicate it is ready
 *  no response would imply that the codec is non-operative
 */

static int wait_for_ready(u32 base)
{
	/* Use a 50 usec timeout - the Linux kernel uses the
	 * same duration */

	int timeout = 50;

	while (timeout--) {
		u32 reg32 = read32(base + HDA_ICII_REG);
		if (!(reg32 & HDA_ICII_BUSY))
			return 0;
		udelay(1);
	}

	return -1;
}

/**
 *  Wait 50usec for the codec to indicate that it accepted
 *  the previous command.  No response would imply that the code
 *  is non-operative
 */

static int wait_for_valid(u32 base)
{
	/* Use a 50 usec timeout - the Linux kernel uses the
	 * same duration */

	int timeout = 25;

	write32(base + 0x68, 1);
	while (timeout--) {
		udelay(1);
	}
	timeout = 50;
	while (timeout--) {
		u32 reg32 = read32(base + 0x68);
		if ((reg32 & ((1 << 1) | (1 << 0))) == (1 << 1)) {

			write32(base + 0x68, 2);
			return 0;
		}
		udelay(1);
	}

	return 1;
}

static void codec_init(struct device *dev, u32 base, int addr)
{
	u32 reg32;
	const u32 *verb;
	u32 verb_size;
	int i;

	printk(BIOS_DEBUG, "sch_audio: Initializing codec #%d\n", addr);

	/* 1 */
	if (wait_for_ready(base) == -1)
		return;

	reg32 = (addr << 28) | 0x000f0000;
	write32(base + 0x60, reg32);

	if (wait_for_valid(base) == -1)
		return;

	reg32 = read32(base + 0x0);
	printk(BIOS_DEBUG, "sch_audio: GCAP: %08x\n", reg32);

	reg32 = read32(base + 0x4);
	printk(BIOS_DEBUG, "sch_audio: OUTPAY: %08x\n", reg32);
	reg32 = read32(base + 0x6);
	printk(BIOS_DEBUG, "sch_audio: INPAY: %08x\n", reg32);

	reg32 = read32(base + 0x64);

	/* 2 */
	printk(BIOS_DEBUG, "sch_audio: codec viddid: %08x\n", reg32);
	verb_size = find_verb(dev, reg32, &verb);

	if (!verb_size) {
		printk(BIOS_DEBUG, "sch_audio: No verb!\n");
		return;
	}
	printk(BIOS_DEBUG, "sch_audio: verb_size: %d\n", verb_size);

	/* 3 */
	for (i = 0; i < verb_size; i++) {
		if (wait_for_ready(base) == -1)
			return;

		write32(base + 0x60, verb[i]);

		if (wait_for_valid(base) == -1)
			return;
	}
	printk(BIOS_DEBUG, "sch_audio: verb loaded.\n");
}

static void codecs_init(struct device *dev, u32 base, u32 codec_mask)
{
	int i;

	for (i = 2; i >= 0; i--) {
		if (codec_mask & (1 << i))
			codec_init(dev, base, i);
	}
}

static void sch_audio_init(struct device *dev)
{
	u32 base;
	struct resource *res;
	u32 codec_mask;
	u32 reg32;

	res = find_resource(dev, 0x10);
	if (!res)
		return;

	reg32 = pci_read_config32(dev, PCI_COMMAND);
	pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MEMORY);

	// NOTE this will break as soon as the sch_audio get's a bar above
	// 4G. Is there anything we can do about it?
	base = (u32) res->base;
	printk(BIOS_DEBUG, "sch_audio: base = %08x\n", (u32) base);
	codec_mask = codec_detect(base);

	if (codec_mask) {
		printk(BIOS_DEBUG, "sch_audio: codec_mask = %02x\n",
		       codec_mask);
		codecs_init(dev, base, codec_mask);
	} else {
		/* No audio codecs found disable HD audio controller */
		pci_write_config32(dev, 0x10, 0);
		pci_write_config32(dev, PCI_COMMAND, 0);
		reg32 = pci_read_config32(dev, 0xFC);
		pci_write_config32(dev, 0xFC, reg32 | 1);
	}
}

static void sch_audio_set_subsystem(device_t dev, unsigned vendor,
				    unsigned device)
{
	if (!vendor || !device) {
		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
				   pci_read_config32(dev, PCI_VENDOR_ID));
	} else {
		pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
			((device & 0xffff) << 16) | (vendor & 0xffff));
	}
}

static struct pci_operations sch_audio_pci_ops = {
	.set_subsystem = sch_audio_set_subsystem,
};

static struct device_operations sch_audio_ops = {
	.read_resources		= pci_dev_read_resources,
	.set_resources		= pci_dev_set_resources,
	.enable_resources	= pci_dev_enable_resources,
	.init			= sch_audio_init,
	.scan_bus		= 0,
	.ops_pci		= &sch_audio_pci_ops,
};

/* SCH audio function */
static const struct pci_driver sch_audio __pci_driver = {
	.ops	= &sch_audio_ops,
	.vendor	= PCI_VENDOR_ID_INTEL,
	.device	= 0x811B,
};