1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <delay.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ehci.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include "iobp.h"
#include "pch.h"
#ifdef __SIMPLE_DEVICE__
void usb_ehci_disable(pci_devfn_t dev)
{
/* Set 0xDC[0]=1 */
pci_or_config32(dev, 0xdc, (1 << 0));
/* Set D3Hot state and disable PME */
pci_update_config16(dev, EHCI_PWR_CTL_STS, ~(PWR_CTL_ENABLE_PME | PWR_CTL_SET_MASK),
PWR_CTL_SET_D3);
/* Clear memory and bus master */
pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0);
pci_and_config16(dev, PCI_COMMAND,
~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
/* Disable device */
switch (dev) {
case PCH_EHCI1_DEV:
RCBA32_OR(FD, PCH_DISABLE_EHCI1);
break;
case PCH_EHCI2_DEV:
RCBA32_OR(FD, PCH_DISABLE_EHCI2);
break;
}
}
/* Handler for EHCI controller on entry to S3/S4/S5 */
void usb_ehci_sleep_prepare(pci_devfn_t dev, u8 slp_typ)
{
u32 reg32;
u8 *bar0_base;
u16 pwr_state;
u16 pci_cmd;
/* Check if the controller is disabled or not present */
bar0_base = (u8 *)pci_read_config32(dev, PCI_BASE_ADDRESS_0);
if (bar0_base == 0 || bar0_base == (u8 *)0xffffffff)
return;
pci_cmd = pci_read_config16(dev, PCI_COMMAND);
switch (slp_typ) {
case ACPI_S4:
case ACPI_S5:
/* Check if controller is in D3 power state */
pwr_state = pci_read_config16(dev, EHCI_PWR_CTL_STS);
if ((pwr_state & PWR_CTL_SET_MASK) == PWR_CTL_SET_D3) {
/* Put in D0 */
u32 new_state = pwr_state & ~PWR_CTL_SET_MASK;
new_state |= PWR_CTL_SET_D0;
pci_write_config16(dev, EHCI_PWR_CTL_STS, new_state);
/* Make sure memory bar is set */
pci_write_config32(dev, PCI_BASE_ADDRESS_0, (u32)bar0_base);
/* Make sure memory space is enabled */
pci_write_config16(dev, PCI_COMMAND, pci_cmd |
PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
}
/*
* If Run/Stop (bit0) is clear in USB2.0_CMD:
* - Clear Async Schedule Enable (bit5) and
* - Clear Periodic Schedule Enable (bit4) and
* - Set Run/Stop (bit0)
*/
reg32 = read32(bar0_base + EHCI_USB_CMD);
if (reg32 & EHCI_USB_CMD_RUN) {
reg32 &= ~(EHCI_USB_CMD_PSE | EHCI_USB_CMD_ASE);
reg32 |= EHCI_USB_CMD_RUN;
write32(bar0_base + EHCI_USB_CMD, reg32);
}
/* Check for Port Enabled in PORTSC(0) (RMH) */
reg32 = read32(bar0_base + EHCI_PORTSC(0));
if (reg32 & EHCI_PORTSC_ENABLED) {
/* Set suspend bit in PORTSC if not already set */
if (!(reg32 & EHCI_PORTSC_SUSPEND)) {
reg32 |= EHCI_PORTSC_SUSPEND;
write32(bar0_base + EHCI_PORTSC(0), reg32);
}
/* Delay 25ms !! */
udelay(25 * 1000);
/* Clear Run/Stop bit */
reg32 = read32(bar0_base + EHCI_USB_CMD);
reg32 &= EHCI_USB_CMD_RUN;
write32(bar0_base + EHCI_USB_CMD, reg32);
}
/* Restore state to D3 if that is what it was at the start */
if ((pwr_state & PWR_CTL_SET_MASK) == PWR_CTL_SET_D3) {
/* Restore pci command reg */
pci_write_config16(dev, PCI_COMMAND, pci_cmd);
/* Enable D3 */
pci_write_config16(dev, EHCI_PWR_CTL_STS, pwr_state);
}
}
}
#else /* !__SIMPLE_DEVICE__ */
static void usb_ehci_clock_gating(struct device *dev)
{
/* IOBP 0xE5004001[7:6] = 11b */
pch_iobp_update(0xe5004001, ~0, (1 << 7)|(1 << 6));
/* Dx:F0:DCh[5,2,1] = 111b
* Dx:F0:DCh[0] = 1b when EHCI controller is disabled */
pci_or_config32(dev, 0xdc, (1 << 5) | (1 << 2) | (1 << 1));
/* Dx:F0:78h[1:0] = 11b */
pci_or_config32(dev, 0x78, (1 << 1) | (1 << 0));
}
static void usb_ehci_init(struct device *dev)
{
printk(BIOS_DEBUG, "EHCI: Setting up controller.. ");
usb_ehci_clock_gating(dev);
/* Disable Wake on Disconnect in RMH */
RCBA32_OR(0x35b0, 0x00000022);
printk(BIOS_DEBUG, "done.\n");
}
static void usb_ehci_set_subsystem(struct device *dev, unsigned int vendor,
unsigned int device)
{
u8 access_cntl;
access_cntl = pci_read_config8(dev, 0x80);
/* Enable writes to protected registers. */
pci_write_config8(dev, 0x80, access_cntl | 1);
pci_dev_set_subsystem(dev, vendor, device);
/* Restore protection. */
pci_write_config8(dev, 0x80, access_cntl);
}
static struct pci_operations lops_pci = {
.set_subsystem = &usb_ehci_set_subsystem,
};
static struct device_operations usb_ehci_ops = {
.read_resources = pci_ehci_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = usb_ehci_init,
.ops_pci = &lops_pci,
};
static const unsigned short pci_device_ids[] = { 0x9c26, 0x8c26, 0x8c2d, 0 };
static const struct pci_driver pch_usb_ehci __pci_driver = {
.ops = &usb_ehci_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.devices = pci_device_ids,
};
#endif /* !__SIMPLE_DEVICE__ */
|
