1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/device.h>
#include <device/pci.h>
#include <console/console.h>
#include <arch/io.h>
#include <cpu/intel/smm_reloc.h>
#include <cpu/x86/smm.h>
#include "pch.h"
void smm_southbridge_clear_state(void)
{
u32 smi_en;
/* Log events from chipset before clearing */
if (CONFIG(ELOG))
pch_log_state();
printk(BIOS_DEBUG, "Initializing Southbridge SMI...");
printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", get_pmbase());
smi_en = inl(get_pmbase() + SMI_EN);
if (smi_en & APMC_EN) {
printk(BIOS_INFO, "SMI# handler already enabled?\n");
return;
}
printk(BIOS_DEBUG, "\n");
/* Dump and clear status registers */
clear_smi_status();
clear_pm1_status();
clear_tco_status();
clear_gpe_status();
}
void smm_southbridge_enable_smi(void)
{
printk(BIOS_DEBUG, "Enabling SMIs.\n");
/* Configure events */
enable_pm1(PWRBTN_EN | GBL_EN);
disable_gpe(PME_B0_EN);
/* Enable SMI generation:
* - on APMC writes (io 0xb2)
* - on writes to SLP_EN (sleep states)
* - on writes to GBL_RLS (bios commands)
* No SMIs:
* - on microcontroller writes (io 0x62/0x66)
* - on TCO events
*/
enable_smi(APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS);
}
static void __unused southbridge_trigger_smi(void)
{
/**
* There are several methods of raising a controlled SMI# via
* software, among them:
* - Writes to io 0xb2 (APMC)
* - Writes to the Local Apic ICR with Delivery mode SMI.
*
* Using the local APIC is a bit more tricky. According to
* AMD Family 11 Processor BKDG no destination shorthand must be
* used.
* The whole SMM initialization is quite a bit hardware specific, so
* I'm not too worried about the better of the methods at the moment
*/
/* raise an SMI interrupt */
printk(BIOS_SPEW, " ... raise SMI#\n");
outb(0x00, 0xb2);
}
static void __unused southbridge_clear_smi_status(void)
{
/* Clear SMI status */
clear_smi_status();
/* Clear PM1 status */
clear_pm1_status();
/* Set EOS bit so other SMIs can occur. */
enable_smi(EOS);
}
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
{
/*
* Issue SMI to set the gnvs pointer in SMM.
* tcg and smi1 are unused.
*
* EAX = APM_CNT_GNVS_UPDATE
* EBX = gnvs pointer
* EDX = APM_CNT
*/
asm volatile (
"outb %%al, %%dx\n\t"
: /* ignore result */
: "a" (APM_CNT_GNVS_UPDATE),
"b" ((u32)gnvs),
"d" (APM_CNT)
);
}
|
