1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
/* SPDX-License-Identifier: GPL-2.0-only */
Device (GPIO)
{
// GPIO Controller
Name (_HID, "INT33C7")
Name (_CID, "INT33C7")
Name (_UID, 1)
Name (RBUF, ResourceTemplate ()
{
DWordIo (ResourceProducer,
MinFixed, // IsMinFixed
MaxFixed, // IsMaxFixed
PosDecode, // Decode
EntireRange, // ISARanges
0x00000000, // AddressGranularity
0x00000000, // AddressMinimum
0x00000000, // AddressMaximum
0x00000000, // AddressTranslation
0x00000000, // RangeLength
, // ResourceSourceIndex
, // ResourceSource
BAR0)
// Disabled due to IRQ storm: http://crosbug.com/p/29548
//Interrupt (ResourceConsumer,
// Level, ActiveHigh, Shared, , , ) {14}
})
Method (_CRS, 0, NotSerialized)
{
CreateDwordField (^RBUF, ^BAR0._MIN, BMIN)
CreateDwordField (^RBUF, ^BAR0._MAX, BMAX)
CreateDwordField (^RBUF, ^BAR0._LEN, BLEN)
BLEN = DEFAULT_GPIOSIZE
BMIN = DEFAULT_GPIOBASE
BMAX = DEFAULT_GPIOBASE + DEFAULT_GPIOSIZE - 1
Return (RBUF)
}
Method (_STA, 0, NotSerialized)
{
Return (0xF)
}
// GWAK: Setup GPIO as ACPI GPE for Wake
// Arg0: GPIO Number
Method (GWAK, 1, Serialized)
{
// Local0 = GPIO Base Address
Local0 = GPBS & ~1
// Local1 = BANK, Local2 = OFFSET
Local2 = Arg0 % 32
Local1 = Arg0 / 32
//
// Set OWNER to ACPI
//
// Local3 = GPIOBASE + GPIO_OWN(BANK)
Local3 = Local0 + Local1 * 4
// GPIO_OWN(BANK)
OperationRegion (IOWN, SystemIO, Local3, 4)
Field (IOWN, AnyAcc, NoLock, Preserve) {
GOWN, 32,
}
// GPIO_OWN[GPIO] = 0 (ACPI)
GOWN &= ~(1 << Local2)
//
// Set ROUTE to SCI
//
// Local3 = GPIOBASE + GPIO_ROUTE(BANK)
Local3 = Local0 + 0x30 + Local1 * 4
// GPIO_ROUTE(BANK)
OperationRegion (IROU, SystemIO, Local3, 4)
Field (IROU, AnyAcc, NoLock, Preserve) {
GROU, 32,
}
// GPIO_ROUTE[GPIO] = 0 (SCI)
GROU &= ~(1 << Local2)
//
// Set GPnCONFIG to GPIO|INPUT|INVERT
//
// Local3 = GPIOBASE + GPnCONFIG0(GPIO)
Local3 = Local0 + 0x100 + Arg0 * 8
// GPnCONFIG(GPIO)
OperationRegion (GPNC, SystemIO, Local3, 8)
Field (GPNC, AnyAcc, NoLock, Preserve) {
GMOD, 1, // MODE: 0=NATIVE 1=GPIO
, 1,
GIOS, 1, // IO_SEL: 0=OUTPUT 1=INPUT
GINV, 1, // INVERT: 0=NORMAL 1=INVERT
GLES, 1, // LxEB: 0=EDGE 1=LEVEL
, 24,
ILVL, 1, // INPUT: 0=LOW 1=HIGH
OLVL, 1, // OUTPUT: 0=LOW 1=HIGH
GPWP, 2, // PULLUP: 00=NONE 01=DOWN 10=UP 11=INVALID
ISEN, 1, // SENSE: 0=ENABLE 1=DISABLE
}
GMOD = 1 // GPIO
GIOS = 1 // INPUT
GINV = 1 // INVERT
}
}
|
