1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <northbridge/intel/sandybridge/sandybridge.h>
#include <southbridge/intel/common/rcba.h>
#include <southbridge/intel/common/pmbase.h>
#include "pch.h"
#define TOTAL_USB_PORTS 14
void early_usb_init(const struct southbridge_usb_port *portmap)
{
u32 reg32;
const u16 currents[] = { 0xf57, 0xf5f, 0x753, 0x75f, 0x14b, 0x74b,
0x557, 0x757, 0x55f, 0x54b
};
int i;
/* Unlock registers. */
write_pmbase16(UPRWC, read_pmbase16(UPRWC) | UPRWC_WR_EN);
for (i = 0; i < TOTAL_USB_PORTS; i++)
RCBA32_AND_OR(USBIR0 + 4 * i, ~0xfff, currents[portmap[i].current]);
/* USB Initialization Registers. We follow what EDS recommends here.
TODO maybe vendor firmware values are better? */
RCBA32(USBIRC) &= ~(1 << 8);
RCBA32_OR(USBIRA, (7 << 12) | (7 << 8) | (7 << 4) | (2 << 0));
RCBA32_AND_OR(USBIRB, ~0x617f0, (3 << 17) | (1 << 12) | (1 << 10)
| (1 << 8) | (4 << 4));
/* Set to Rate Matching Hub Mode to make PCI devices appear. */
RCBA32(0x3598) = 0;
reg32 = 0;
for (i = 0; i < TOTAL_USB_PORTS; i++)
if (!portmap[i].enabled)
reg32 |= (1 << i);
RCBA32(USBPDO) = reg32;
reg32 = 0;
/* The OC pins of the first 8 USB ports are mapped in USBOCM1 */
for (i = 0; i < 8; i++)
if (portmap[i].enabled && portmap[i].oc_pin >= 0)
reg32 |= (1 << (i + 8 * portmap[i].oc_pin));
RCBA32(USBOCM1) = reg32;
reg32 = 0;
/* The OC pins of the remainder 6 USB ports are mapped in USBOCM2 */
for (i = 8; i < TOTAL_USB_PORTS; i++)
if (portmap[i].enabled && portmap[i].oc_pin >= 4)
reg32 |= (1 << (i - 8 + 8 * (portmap[i].oc_pin - 4)));
RCBA32(USBOCM2) = reg32;
/* Relock registers. */
write_pmbase16(UPRWC, 0);
}
|
