1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/io.h>
#include <console/console.h>
#include <device/pci_def.h>
#include <device/pci_ops.h>
#include <device/smbus_host.h>
#include <northbridge/intel/ironlake/ironlake.h>
#include <southbridge/intel/ibexpeak/pch.h>
#include <southbridge/intel/common/gpio.h>
static void early_gpio_init(void)
{
pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1);
pci_write_config8(PCH_LPC_DEV, GPIO_CNTL, 0x10);
setup_pch_gpios(&mainboard_gpio_map);
}
static void pch_default_disable(void)
{
/* Must set BIT0 (hides performance counters PCI device).
coreboot enables the Rate Matching Hub which makes the UHCI PCI
devices disappear, so BIT5-12 and BIT28 can be set to hide those. */
RCBA32(FD) = (1 << 28) | (0xff << 5) | 1;
/* Set reserved bit to 1 */
RCBA32(FD2) = 1;
}
void ibexpeak_setup_bars(void)
{
printk(BIOS_DEBUG, "Setting up static southbridge registers...");
pci_write_config32(PCI_DEV(0, 0x1f, 0), RCBA, CONFIG_FIXED_RCBA_MMIO_BASE | 1);
pci_write_config32(PCI_DEV(0, 0x1f, 0), PMBASE, DEFAULT_PMBASE | 1);
/* Enable ACPI BAR */
pci_write_config8(PCH_LPC_DEV, ACPI_CNTL, ACPI_EN);
printk(BIOS_DEBUG, " done.\n");
printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
/* No reset */
RCBA32(GCS) = RCBA32(GCS) | (1 << 5);
/* halt timer */
outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08);
/* halt timer */
outw(inw(DEFAULT_PMBASE | 0x60 | 0x06) | 2, DEFAULT_PMBASE | 0x60 | 0x06);
printk(BIOS_DEBUG, " done.\n");
pci_write_config32(PCI_DEV(0, 0x16, 0), PCI_BASE_ADDRESS_0,
(uintptr_t)DEFAULT_HECIBAR);
pci_write_config32(PCI_DEV(0, 0x16, 0), PCI_COMMAND,
PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
}
void early_pch_init(void)
{
early_gpio_init();
enable_smbus();
/* TODO, make this configurable */
pch_setup_cir(IRONLAKE_MOBILE);
southbridge_configure_default_intmap();
pch_default_disable();
early_usb_init(mainboard_usb_ports);
}
|
