1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <console/console.h>
#include <device/pci_ops.h>
#include <device/smbus_host.h>
#include <southbridge/intel/common/gpio.h>
#include <southbridge/intel/common/pmbase.h>
#include "i82801gx.h"
#include "chip.h"
void i82801gx_lpc_setup(void)
{
const pci_devfn_t d31f0 = PCI_DEV(0, 0x1f, 0);
const struct device *dev = pcidev_on_root(0x1f, 0);
const struct southbridge_intel_i82801gx_config *config;
/* Configure serial IRQs.*/
pci_write_config8(d31f0, SERIRQ_CNTL, 0xd0);
/*
* Enable some common LPC IO ranges:
* - 0x2e/0x2f, 0x4e/0x4f often SuperIO
* - 0x60/0x64, 0x62/0x66 often KBC/EC
* - 0x3f0-0x3f5/0x3f7 FDD
* - 0x378-0x37f and 0x778-0x77f LPT
* - 0x2f8-0x2ff COMB
* - 0x3f8-0x3ff COMA
* - 0x208-0x20f GAMEH
* - 0x200-0x207 GAMEL
*/
pci_write_config16(d31f0, LPC_IO_DEC, 0x0010);
pci_write_config16(d31f0, LPC_EN, CNF2_LPC_EN | CNF1_LPC_EN
| MC_LPC_EN | KBC_LPC_EN | GAMEH_LPC_EN
| GAMEL_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
| COMB_LPC_EN | COMA_LPC_EN);
/* Set up generic decode ranges */
if (!dev || !dev->chip_info)
return;
config = dev->chip_info;
pci_write_config32(d31f0, GEN1_DEC, config->gen1_dec);
pci_write_config32(d31f0, GEN2_DEC, config->gen2_dec);
pci_write_config32(d31f0, GEN3_DEC, config->gen3_dec);
pci_write_config32(d31f0, GEN4_DEC, config->gen4_dec);
}
void i82801gx_setup_bars(void)
{
const pci_devfn_t d31f0 = PCI_DEV(0, 0x1f, 0);
pci_write_config32(d31f0, RCBA, CONFIG_FIXED_RCBA_MMIO_BASE | 1);
pci_write_config32(d31f0, PMBASE, DEFAULT_PMBASE | 1);
pci_write_config8(d31f0, ACPI_CNTL, ACPI_EN);
pci_write_config32(d31f0, GPIOBASE, DEFAULT_GPIOBASE | 1);
pci_write_config8(d31f0, GPIO_CNTL, GPIO_EN);
}
#define TCO_BASE 0x60
#if ENV_RAMINIT
void i82801gx_early_init(void)
{
enable_smbus();
printk(BIOS_DEBUG, "Setting up static southbridge registers...");
i82801gx_setup_bars();
setup_pch_gpios(&mainboard_gpio_map);
printk(BIOS_DEBUG, " done.\n");
printk(BIOS_DEBUG, "Disabling Watchdog reboot...");
RCBA32(GCS) = RCBA32(GCS) | (1 << 5); /* No reset */
write_pmbase16(TCO_BASE + 0x8, (1 << 11)); /* halt timer */
write_pmbase16(TCO_BASE + 0x4, (1 << 3)); /* clear timeout */
write_pmbase16(TCO_BASE + 0x6, (1 << 1)); /* clear 2nd timeout */
printk(BIOS_DEBUG, " done.\n");
/* program secondary mlt XXX byte? */
pci_write_config8(PCI_DEV(0, 0x1e, 0), SMLT, 0x20);
/* reset rtc power status */
pci_and_config8(PCI_DEV(0, 0x1f, 0), GEN_PMCON_3, ~RTC_BATTERY_DEAD);
/* USB transient disconnect */
pci_or_config8(PCI_DEV(0, 0x1f, 0), 0xad, 3 << 0);
pci_or_config32(PCI_DEV(0, 0x1d, 7), 0xfc, (1 << 29) | (1 << 17));
pci_or_config32(PCI_DEV(0, 0x1d, 7), 0xdc, (1 << 31) | (1 << 27));
/* Enable IOAPIC */
RCBA8(OIC) = 0x03;
RCBA8(OIC);
/* A lot of CIR bits relate DMI setup which is likely not correctly
done for x4x. The issue is also present on ICH10. */
if (!CONFIG(NORTHBRIDGE_INTEL_X4X))
ich7_setup_cir();
}
#endif
|
