1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2009 coresystems GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
// Intel SMBus Controller 0:1f.3
Device (SBUS)
{
Name (_ADR, 0x001f0003)
#ifdef ENABLE_SMBUS_METHODS
OperationRegion (SMBP, PCI_Config, 0x00, 0x100)
Field(SMBP, DWordAcc, NoLock, Preserve)
{
Offset(0x40),
, 2,
I2CE, 1
}
OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20)
Field (SMBI, ByteAcc, NoLock, Preserve)
{
HSTS, 8, // Host Status
, 8,
HCNT, 8, // Host Control
HCMD, 8, // Host Command
TXSA, 8, // Transmit Slave Address
DAT0, 8, // Host Data 0
DAT1, 8, // Host Data 1
HBDB, 8, // Host Block Data Byte
PECK, 8, // Packet Error Check
RXSA, 8, // Receive Slave Address
RXDA, 16, // Receive Slave Data
AUXS, 8, // Auxiliary Status
AUXC, 8, // Auxiliary Control
SLPC, 8, // SMLink Pin Control
SBPC, 8, // SMBus Pin Control
SSTS, 8, // Slave Status
SCMD, 8, // Slave Command
NADR, 8, // Notify Device Address
NDLB, 8, // Notify Data Low Byte
NDLH, 8, // Notify Data High Byte
}
// Kill all SMBus communication
Method (KILL, 0, Serialized)
{
Or (HCNT, 0x02, HCNT) // Send Kill
Or (HSTS, 0xff, HSTS) // Clean Status
}
// Check if last operation completed
// return Failure = 0, Success = 1
Method (CMPL, 0, Serialized)
{
Store (4000, Local0) // Timeout 200ms in 50us steps
While (Local0) {
If (And(HSTS, 0x02)) { // Completion Status?
Return (1) // Operation Completed
} Else {
Stall (50)
Decrement (Local0)
If (LEqual(Local0, 0)) {
KILL()
}
}
}
Return (0) // Failure
}
// Wait for SMBus to become ready
Method (SRDY, 0, Serialized)
{
Store (200, Local0) // Timeout 200ms
While (Local0) {
If (And(HSTS, 0x40)) { // IN_USE?
Sleep(1) // Wait 1ms
Decrement(Local0) // timeout--
If (LEqual(Local0, 0)) {
Return (1)
}
} Else {
Store (0, Local0) // We're ready
}
}
Store (4000, Local0) // Timeout 200ms (50us * 4000)
While (Local0) {
If (And (HSTS, 0x01)) { // Host Busy?
Stall(50) // Wait 50us
Decrement(Local0) // timeout--
If (LEqual(Local0, 0)) {
KILL()
}
} Else {
Return (0) // Success
}
}
Return (1) // Failure
}
// SMBus Send Byte
// Arg0: Address
// Arg1: Data
// Return: 1 = Success, 0=Failure
Method (SSXB, 2, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0)
}
// Send Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Arg0, TXSA) // Write Address
Store (Arg1, HCMD) // Write Data
Store (0x48, HCNT) // Start + Byte Data Protocol
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (1) // Success
}
Return (0)
}
// SMBus Receive Byte
// Arg0: Address
// Return: 0xffff = Failure, Data (8bit) = Success
Method (SRXB, 2, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0xffff)
}
// Receive Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Or (Arg0, 1), TXSA) // Write Address
Store (0x44, HCNT) // Start
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (DAT0) // Success
}
Return (0xffff)
}
// SMBus Write Byte
// Arg0: Address
// Arg1: Command
// Arg2: Data
// Return: 1 = Success, 0=Failure
Method (SWRB, 3, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0)
}
// Send Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Arg0, TXSA) // Write Address
Store (Arg1, HCMD) // Write Command
Store (Arg2, DAT0) // Write Data
Store (0x48, HCNT) // Start + Byte Protocol
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (1) // Success
}
Return (0)
}
// SMBus Read Byte
// Arg0: Address
// Arg1: Command
// Return: 0xffff = Failure, Data (8bit) = Success
Method (SRDB, 2, Serialized)
{
// Is the SMBus Controller Ready?
If (SRDY()) {
Return (0xffff)
}
// Receive Byte
Store (0, I2CE) // SMBus Enable
Store (0xbf, HSTS)
Store (Or (Arg0, 1), TXSA) // Write Address
Store (Arg1, HCMD) // Command
Store (0x48, HCNT) // Start
If (CMPL()) {
Or (HSTS, 0xff, HSTS) // Clean up
Return (DAT0) // Success
}
Return (0xffff)
}
#endif
}
|
