1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include "esb6300.h"
static void sata_init(struct device *dev)
{
/* Enable sata devices so the linux sata driver will work */
uint16_t word;
/* Enable SATA devices */
printk_debug("SATA init\n");
/* SATA configuration */
pci_write_config8(dev, 0x04, 0x07);
pci_write_config8(dev, 0x09, 0x8f);
/* Set timmings */
pci_write_config16(dev, 0x40, 0x0a307);
pci_write_config16(dev, 0x42, 0x0a307);
/* Sync DMA */
pci_write_config16(dev, 0x48, 0x000f);
pci_write_config16(dev, 0x4a, 0x1111);
/* 66 mhz */
pci_write_config16(dev, 0x54, 0xf00f);
/* Combine ide - sata configuration */
pci_write_config8(dev, 0x90, 0x0);
/* port 0 & 1 enable */
pci_write_config8(dev, 0x92, 0x33);
/* initialize SATA */
pci_write_config16(dev, 0xa0, 0x0018);
pci_write_config32(dev, 0xa4, 0x00000264);
pci_write_config16(dev, 0xa0, 0x0040);
pci_write_config32(dev, 0xa4, 0x00220043);
printk_debug("SATA Enabled\n");
}
static void esb6300_sata_set_subsystem(device_t dev, unsigned vendor, unsigned device)
{
/* This value is also visible in usb1, usb2 and smbus functions */
pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
((device & 0xffff) << 16) | (vendor & 0xffff));
}
static struct pci_operations lops_pci = {
.set_subsystem = esb6300_sata_set_subsystem,
};
static struct device_operations sata_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = sata_init,
.scan_bus = 0,
.ops_pci = &lops_pci,
};
static const struct pci_driver sata_driver __pci_driver = {
.ops = &sata_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_6300ESB_SATA,
};
static const struct pci_driver sata_driver_nr __pci_driver = {
.ops = &sata_ops,
.vendor = PCI_VENDOR_ID_INTEL,
.device = PCI_DEVICE_ID_INTEL_6300ESB_SATA_RAID,
};
|
