1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
#include "smbus.h"
#define SMBUS_IO_BASE 0x0f00
static void enable_smbus(void)
{
device_t dev = PCI_DEV(0x0, 0x1f, 0x3);
print_spew("SMBus controller enabled\n");
pci_write_config32(dev, 0x20, SMBUS_IO_BASE | 1);
pci_write_config8(dev, 0x40, 1);
pci_write_config8(dev, 0x4, 1);
/* SMBALERT_DIS */
pci_write_config8(dev, 0x11, 4);
/* Disable interrupt generation */
outb(0, SMBUS_IO_BASE + SMBHSTCTL);
}
static int smbus_read_byte(unsigned device, unsigned address)
{
return do_smbus_read_byte(SMBUS_IO_BASE, device, address);
}
#ifdef DEADCODE
static void smbus_write_byte(unsigned device, unsigned address, unsigned char val)
{
if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
return;
}
return;
}
static int smbus_write_block(unsigned device, unsigned length, unsigned cmd,
unsigned data1, unsigned data2)
{
unsigned char byte;
unsigned char stat;
int i;
/* chear the PM timeout flags, SECOND_TO_STS */
outw(inw(0x0400 + 0x66), 0x0400 + 0x66);
if (smbus_wait_until_ready(SMBUS_IO_BASE) < 0) {
return -2;
}
/* setup transaction */
/* Obtain ownership */
outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT);
for(stat=0;(stat&0x40)==0;) {
stat = inb(SMBUS_IO_BASE + SMBHSTSTAT);
}
/* clear the done bit */
outb(0x80, SMBUS_IO_BASE + SMBHSTSTAT);
/* disable interrupts */
outb(inb(SMBUS_IO_BASE + SMBHSTCTL) & (~1), SMBUS_IO_BASE + SMBHSTCTL);
/* set the device I'm talking too */
outb(((device & 0x7f) << 1), SMBUS_IO_BASE + SMBXMITADD);
/* set the command address */
outb(cmd & 0xFF, SMBUS_IO_BASE + SMBHSTCMD);
/* set the block length */
outb(length & 0xFF, SMBUS_IO_BASE + SMBHSTDAT0);
/* try sending out the first byte of data here */
byte=(data1>>(0))&0x0ff;
outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
/* issue a block write command */
outb((inb(SMBUS_IO_BASE + SMBHSTCTL) & 0xE3) | (0x5 << 2) | 0x40,
SMBUS_IO_BASE + SMBHSTCTL);
for(i=0;i<length;i++) {
/* poll for transaction completion */
if (smbus_wait_until_blk_done(SMBUS_IO_BASE) < 0) {
return -3;
}
/* load the next byte */
if(i>3)
byte=(data2>>(i%4))&0x0ff;
else
byte=(data1>>(i))&0x0ff;
outb(byte,SMBUS_IO_BASE + SMBBLKDAT);
/* clear the done bit */
outb(inb(SMBUS_IO_BASE + SMBHSTSTAT),
SMBUS_IO_BASE + SMBHSTSTAT);
}
print_debug("SMBUS Block complete\n");
return 0;
}
#endif
|
