1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/io.h>
#include <device/pci_ops.h>
#include <device/pci_type.h>
#include <stdint.h>
#include "gpio.h"
#define MAX_GPIO_NUMBER 75 /* zero based */
/* LPC GPIO Base Address Register */
#define GPIO_BASE 0x48
static u16 get_gpio_base(void)
{
#ifdef __SIMPLE_DEVICE__
/* Don't assume GPIO_BASE is still the same */
return pci_read_config16(PCI_DEV(0, 0x1f, 0), GPIO_BASE) & 0xfffe;
#else
static u16 gpiobase;
if (gpiobase)
return gpiobase;
gpiobase = pci_read_config16(pcidev_on_root(0x1f, 0), GPIO_BASE) & 0xfffe;
return gpiobase;
#endif
}
void setup_pch_gpios(const struct pch_gpio_map *gpio)
{
u16 gpiobase = get_gpio_base();
/* The order of these calls does matter on ICH9M and prior.
* The level has to be set on pins configured as gpio,
* but on newer platforms we want to change the level first
* to make sure there are no glitches on the lines !
* Write the gpio level twice to satisfy both requirements.
*/
/* GPIO Set 1 */
if (gpio->set1.level)
outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
if (gpio->set1.mode)
outl(*((u32 *)gpio->set1.mode), gpiobase + GPIO_USE_SEL);
if (gpio->set1.direction)
outl(*((u32 *)gpio->set1.direction), gpiobase + GP_IO_SEL);
if (gpio->set1.level)
outl(*((u32 *)gpio->set1.level), gpiobase + GP_LVL);
if (gpio->set1.reset)
outl(*((u32 *)gpio->set1.reset), gpiobase + GP_RST_SEL1);
if (gpio->set1.invert)
outl(*((u32 *)gpio->set1.invert), gpiobase + GPI_INV);
if (gpio->set1.blink)
outl(*((u32 *)gpio->set1.blink), gpiobase + GPO_BLINK);
/* GPIO Set 2 */
if (gpio->set2.level)
outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
if (gpio->set2.mode)
outl(*((u32 *)gpio->set2.mode), gpiobase + GPIO_USE_SEL2);
if (gpio->set2.direction)
outl(*((u32 *)gpio->set2.direction), gpiobase + GP_IO_SEL2);
if (gpio->set2.level)
outl(*((u32 *)gpio->set2.level), gpiobase + GP_LVL2);
if (gpio->set2.reset)
outl(*((u32 *)gpio->set2.reset), gpiobase + GP_RST_SEL2);
/* GPIO Set 3 */
if (gpio->set3.level)
outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
if (gpio->set3.mode)
outl(*((u32 *)gpio->set3.mode), gpiobase + GPIO_USE_SEL3);
if (gpio->set3.direction)
outl(*((u32 *)gpio->set3.direction), gpiobase + GP_IO_SEL3);
if (gpio->set3.level)
outl(*((u32 *)gpio->set3.level), gpiobase + GP_LVL3);
if (gpio->set3.reset)
outl(*((u32 *)gpio->set3.reset), gpiobase + GP_RST_SEL3);
}
/*
* return current gpio level.
*/
int get_gpio(int gpio_num)
{
static const int gpio_reg_offsets[] = {GP_LVL, GP_LVL2, GP_LVL3};
u16 gpio_base = get_gpio_base();
int index, bit;
if (gpio_num > MAX_GPIO_NUMBER)
return 0; /* Just ignore wrong gpio numbers. */
index = gpio_num / 32;
bit = gpio_num % 32;
return (inl(gpio_base + gpio_reg_offsets[index]) >> bit) & 1;
}
/*
* get a number comprised of multiple GPIO values. gpio_num_array points to
* the array of gpio pin numbers to scan, terminated by -1.
*/
unsigned int get_gpios(const int *gpio_num_array)
{
int gpio;
unsigned int bitmask = 1;
unsigned int vector = 0;
while (bitmask &&
((gpio = *gpio_num_array++) != -1)) {
if (get_gpio(gpio))
vector |= bitmask;
bitmask <<= 1;
}
return vector;
}
/*
* set gpio output to level.
*/
void set_gpio(int gpio_num, int value)
{
static const int gpio_reg_offsets[] = {
GP_LVL, GP_LVL2, GP_LVL3
};
u16 gpio_base = get_gpio_base();
int index, bit;
u32 config;
if (gpio_num > MAX_GPIO_NUMBER)
return; /* Just ignore wrong gpio numbers. */
index = gpio_num / 32;
bit = gpio_num % 32;
config = inl(gpio_base + gpio_reg_offsets[index]);
config &= ~(1 << bit);
if (value != 0)
config |= (1 << bit);
outl(config, gpio_base + gpio_reg_offsets[index]);
}
int gpio_is_native(int gpio_num)
{
static const int gpio_reg_offsets[] = {
GPIO_USE_SEL, GPIO_USE_SEL2, GPIO_USE_SEL3
};
u16 gpio_base = get_gpio_base();
int index, bit;
u32 config;
if (gpio_num > MAX_GPIO_NUMBER)
return 0; /* Just ignore wrong gpio numbers. */
index = gpio_num / 32;
bit = gpio_num % 32;
config = inl(gpio_base + gpio_reg_offsets[index]);
return !(config & (1 << bit));
}
|
