1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include "pch.h"
void southbridge_configure_default_intmap(void)
{
/*
* For the PCH internal PCI functions, provide a reasonable
* default IRQ mapping that utilizes only PIRQ A to D. Higher
* PIRQs are sometimes used for other on-board chips that
* require an edge triggered interrupt which is not shareable.
*/
/*
* We use a linear mapping for the pin numbers. They are not
* physical pins, and thus, have no relation between the dif-
* ferent devices. Only rule we must obey is that a single-
* function device has to use pin A.
*/
RCBA32(D31IP) = (INTD << D31IP_TTIP) | (INTC << D31IP_SIP2) |
(INTB << D31IP_SMIP) | (INTA << D31IP_SIP);
RCBA32(D29IP) = (INTA << D29IP_E1P);
RCBA32(D28IP) = (INTD << D28IP_P8IP) | (INTC << D28IP_P7IP) |
(INTB << D28IP_P6IP) | (INTA << D28IP_P5IP) |
(INTD << D28IP_P4IP) | (INTC << D28IP_P3IP) |
(INTB << D28IP_P2IP) | (INTA << D28IP_P1IP);
RCBA32(D27IP) = (INTA << D27IP_ZIP);
RCBA32(D26IP) = (INTA << D26IP_E2P);
RCBA32(D25IP) = (INTA << D25IP_LIP);
RCBA32(D22IP) = (INTA << D22IP_MEI1IP);
RCBA32(D20IP) = (INTA << D20IP_XHCIIP);
/*
* For the PIRQ allocation the following was taken into
* account:
* o Interrupts of the PCIe root ports are only about
* events at the ports, not downstream devices. So we
* don't expect many interrupts there and ignore them.
* o We don't expect to talk constantly to the ME either
* so ignore that, too. Same for SMBus and the thermal
* device.
* o Second SATA interface is only used in non-AHCI mode
* so unlikely to coexist with modern interfaces (e.g.
* xHCI).
* o An OS that knows USB3 will likely also know how to
* use MSI.
*
* The functions that might matter first:
*
* D31IP_SIP SATA 1 -> PIRQ A (MSI capable in AHCI mode)
* D31IP_SIP2 SATA 2 -> PIRQ B
* D29IP_E1P EHCI 1 -> PIRQ C
* D27IP_ZIP HDA -> PIRQ D (MSI capable)
* D26IP_E2P EHCI 2 -> PIRQ D
* D25IP_LIP GbE -> PIRQ B (MSI capable)
* D20IP_XHCIIP xHCI -> PIRQ B (MSI capable)
*
* D31IP_TTIP Thermal -> PIRQ B
* D31IP_SMIP SMBUS -> PIRQ A
* D28IP_* PCIe RP -> PIRQ A-D (MSI capable)
* D22IP_MEI1IP ME -> PIRQ A (MSI capable)
*
* Note, CPU-integrated functions seem to always use PIRQ A.
*/
#define _none 0
DIR_ROUTE(D31IR, PIRQA, PIRQA, PIRQB, PIRQB);
DIR_ROUTE(D29IR, PIRQC, _none, _none, _none);
DIR_ROUTE(D28IR, PIRQA, PIRQB, PIRQC, PIRQD);
DIR_ROUTE(D27IR, PIRQD, _none, _none, _none);
DIR_ROUTE(D26IR, PIRQD, _none, _none, _none);
DIR_ROUTE(D25IR, PIRQB, _none, _none, _none);
DIR_ROUTE(D22IR, PIRQA, _none, _none, _none);
DIR_ROUTE(D20IR, PIRQB, _none, _none, _none);
#undef _none
/* Enable IOAPIC (generic) */
RCBA16(OIC) = 0x0100;
/* PCH BWG says to read back the IOAPIC enable register */
(void) RCBA16(OIC);
}
void southbridge_rcba_config(void)
{
RCBA32(FD) = PCH_DISABLE_ALWAYS;
}
|
